| Message ID | 1351615741-24134-6-git-send-email-hongbo.zhang@linaro.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Tue, Oct 30, 2012 at 10:19 PM, hongbo.zhang <hongbo.zhang@linaro.org> wrote: > From: "hongbo.zhang" <hongbo.zhang@linaro.com> Just a minor comment below. > This patch adds device tree properties for ST-Ericsson DB8500 thermal driver, > also adds the platform data to support the old fashion. > > Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> > --- > arch/arm/boot/dts/dbx5x0.dtsi | 14 +++++++++ > arch/arm/boot/dts/snowball.dts | 31 ++++++++++++++++++ > arch/arm/configs/u8500_defconfig | 4 +++ > arch/arm/mach-ux500/board-mop500.c | 64 ++++++++++++++++++++++++++++++++++++++ > 4 files changed, 113 insertions(+) > diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig > index cc5e7a8..34918c4 100644 > --- a/arch/arm/configs/u8500_defconfig > +++ b/arch/arm/configs/u8500_defconfig > @@ -118,3 +118,7 @@ CONFIG_DEBUG_KERNEL=y > CONFIG_DEBUG_INFO=y > # CONFIG_FTRACE is not set > CONFIG_DEBUG_USER=y > +CONFIG_THERMAL=y > +CONFIG_CPU_THERMAL=y > +CONFIG_DB8500_THERMAL=y > +CONFIG_DB8500_CPUFREQ_COOLING=y Have you entered these manually?? Or used make savedefconfig? -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 31 October 2012 10:18, viresh kumar <viresh.kumar@linaro.org> wrote: > On Tue, Oct 30, 2012 at 10:19 PM, hongbo.zhang <hongbo.zhang@linaro.org> wrote: >> From: "hongbo.zhang" <hongbo.zhang@linaro.com> > > Just a minor comment below. > >> This patch adds device tree properties for ST-Ericsson DB8500 thermal driver, >> also adds the platform data to support the old fashion. >> >> Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com> > > Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> > >> --- >> arch/arm/boot/dts/dbx5x0.dtsi | 14 +++++++++ >> arch/arm/boot/dts/snowball.dts | 31 ++++++++++++++++++ >> arch/arm/configs/u8500_defconfig | 4 +++ >> arch/arm/mach-ux500/board-mop500.c | 64 ++++++++++++++++++++++++++++++++++++++ >> 4 files changed, 113 insertions(+) > >> diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig >> index cc5e7a8..34918c4 100644 >> --- a/arch/arm/configs/u8500_defconfig >> +++ b/arch/arm/configs/u8500_defconfig >> @@ -118,3 +118,7 @@ CONFIG_DEBUG_KERNEL=y >> CONFIG_DEBUG_INFO=y >> # CONFIG_FTRACE is not set >> CONFIG_DEBUG_USER=y >> +CONFIG_THERMAL=y >> +CONFIG_CPU_THERMAL=y >> +CONFIG_DB8500_THERMAL=y >> +CONFIG_DB8500_CPUFREQ_COOLING=y > > Have you entered these manually?? Or used make savedefconfig? Yes these are added manually, make savedefconfig should be better, but it seems the original defconfig file are not well generated by savedefconfig, this file will be changed too much if I use make savedefconfig. If this is an issue, I will inform the maintainer to update this. After consideration, for this time, I will use savedefconfig to find right places for my configs, discarding the other dis-order ones. -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 4b0e0ca..731086b 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -203,6 +203,14 @@ reg = <0x80157450 0xC>; }; + thermal@801573c0 { + compatible = "stericsson,db8500-thermal"; + reg = <0x801573c0 0x40>; + interrupts = <21 0x4>, <22 0x4>; + interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; + status = "disabled"; + }; + db8500-prcmu-regulators { compatible = "stericsson,db8500-prcmu-regulator"; @@ -660,5 +668,11 @@ ranges = <0 0x50000000 0x4000000>; status = "disabled"; }; + + cpufreq-cooling { + compatible = "stericsson,db8500-cpufreq-cooling"; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 702c0ba..c6f85f0 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -99,6 +99,33 @@ status = "okay"; }; + prcmu@80157000 { + thermal@801573c0 { + num-trips = <4>; + + trip0-temp = <70000>; + trip0-type = "active"; + trip0-cdev-num = <1>; + trip0-cdev-name0 = "thermal-cpufreq-0"; + + trip1-temp = <75000>; + trip1-type = "active"; + trip1-cdev-num = <1>; + trip1-cdev-name0 = "thermal-cpufreq-0"; + + trip2-temp = <80000>; + trip2-type = "active"; + trip2-cdev-num = <1>; + trip2-cdev-name0 = "thermal-cpufreq-0"; + + trip3-temp = <85000>; + trip3-type = "critical"; + trip3-cdev-num = <0>; + + status = "okay"; + }; + }; + external-bus@50000000 { status = "okay"; @@ -183,5 +210,9 @@ reg = <0x33>; }; }; + + cpufreq-cooling { + status = "okay"; + }; }; }; diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index cc5e7a8..34918c4 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -118,3 +118,7 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y +CONFIG_DB8500_THERMAL=y +CONFIG_DB8500_CPUFREQ_COOLING=y diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 416d436..b03216b 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-nomadik.h> +#include <linux/platform_data/db8500_thermal.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> @@ -229,6 +230,67 @@ static struct ab8500_platform_data ab8500_platdata = { }; /* + * Thermal Sensor + */ + +static struct resource db8500_thsens_resources[] = { + { + .name = "IRQ_HOTMON_LOW", + .start = IRQ_PRCMU_HOTMON_LOW, + .end = IRQ_PRCMU_HOTMON_LOW, + .flags = IORESOURCE_IRQ, + }, + { + .name = "IRQ_HOTMON_HIGH", + .start = IRQ_PRCMU_HOTMON_HIGH, + .end = IRQ_PRCMU_HOTMON_HIGH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct db8500_thsens_platform_data db8500_thsens_data = { + .trip_points[0] = { + .temp = 70000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[1] = { + .temp = 75000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[2] = { + .temp = 80000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[3] = { + .temp = 85000, + .type = THERMAL_TRIP_CRITICAL, + }, + .num_trips = 4, +}; + +static struct platform_device u8500_thsens_device = { + .name = "db8500-thermal", + .resource = db8500_thsens_resources, + .num_resources = ARRAY_SIZE(db8500_thsens_resources), + .dev = { + .platform_data = &db8500_thsens_data, + }, +}; + +static struct platform_device u8500_cpufreq_cooling_device = { + .name = "db8500-cpufreq-cooling", +}; + +/* * TPS61052 */ @@ -583,6 +645,8 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_key_dev, &snowball_sbnet_dev, &snowball_gpio_en_3v3_regulator_dev, + &u8500_thsens_device, + &u8500_cpufreq_cooling_device, }; static void __init mop500_init_machine(void)