| Message ID | 1351718353-6124-5-git-send-email-ddutile@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Wed, 2012-10-31 at 17:19 -0400, Donald Dutile wrote: > Some implementations of SRIOV provide a capability structure > value of TotalVFs that is greater than what the software can support. > Provide a method to reduce the capability structure reported value > to the value the driver can support. > This ensures sysfs reports the current capability of the system, > hardware and software. > Example for its use: igb & ixgbe -- report 8 & 64 as TotalVFs, > but drivers only support 7 & 63 maximum. > > Signed-off-by: Donald Dutile <ddutile@redhat.com> > --- > drivers/pci/iov.c | 27 ++++++++++++++++++++++++++- > drivers/pci/pci-sysfs.c | 10 ++++++++-- > drivers/pci/pci.h | 1 + > include/linux/pci.h | 5 +++++ > 4 files changed, 40 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c > index aeccc91..98c3d37 100644 > --- a/drivers/pci/iov.c > +++ b/drivers/pci/iov.c > @@ -682,7 +682,6 @@ int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn) > > if (!dev->is_physfn) > return -ENODEV; > - > return sriov_enable(dev, nr_virtfn); > } > EXPORT_SYMBOL_GPL(pci_enable_sriov); This hunk doesn't belong in this patch. > @@ -735,3 +734,29 @@ int pci_num_vf(struct pci_dev *dev) > return dev->sriov->nr_virtfn; > } > EXPORT_SYMBOL_GPL(pci_num_vf); > + > +/** > + * pci_sriov_set_totalvfs -- reduce the TotalVFs available > + * @dev: the PCI PF device > + * numvfs: number that should be used for TotalVFs supported > + * > + * Should be called from PF driver's probe routine with > + * device's mutex held. > + * > + * Returns 0 if PF is an SRIOV-capable device and > + * value of numvfs valid, otherwise -EINVAL This says the only possible error is -EINVAL, but it can also return -EIO! And the already-enabled case might be one that some drivers will need to handle specially. > + */ > +int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) > +{ > + if (!dev || !dev->is_physfn || (numvfs > dev->sriov->total)) > + return -EINVAL; > + > + /* Shouldn't change if VFs already enabled */ > + if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE) > + return -EIO; [...] EBUSY seems a bit more appropriate. Ben.
On 10/31/2012 07:53 PM, Ben Hutchings wrote: > On Wed, 2012-10-31 at 17:19 -0400, Donald Dutile wrote: >> Some implementations of SRIOV provide a capability structure >> value of TotalVFs that is greater than what the software can support. >> Provide a method to reduce the capability structure reported value >> to the value the driver can support. >> This ensures sysfs reports the current capability of the system, >> hardware and software. >> Example for its use: igb& ixgbe -- report 8& 64 as TotalVFs, >> but drivers only support 7& 63 maximum. >> >> Signed-off-by: Donald Dutile<ddutile@redhat.com> >> --- >> drivers/pci/iov.c | 27 ++++++++++++++++++++++++++- >> drivers/pci/pci-sysfs.c | 10 ++++++++-- >> drivers/pci/pci.h | 1 + >> include/linux/pci.h | 5 +++++ >> 4 files changed, 40 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c >> index aeccc91..98c3d37 100644 >> --- a/drivers/pci/iov.c >> +++ b/drivers/pci/iov.c >> @@ -682,7 +682,6 @@ int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn) >> >> if (!dev->is_physfn) >> return -ENODEV; >> - >> return sriov_enable(dev, nr_virtfn); >> } >> EXPORT_SYMBOL_GPL(pci_enable_sriov); > > This hunk doesn't belong in this patch. > gone in next rev. >> @@ -735,3 +734,29 @@ int pci_num_vf(struct pci_dev *dev) >> return dev->sriov->nr_virtfn; >> } >> EXPORT_SYMBOL_GPL(pci_num_vf); >> + >> +/** >> + * pci_sriov_set_totalvfs -- reduce the TotalVFs available >> + * @dev: the PCI PF device >> + * numvfs: number that should be used for TotalVFs supported >> + * >> + * Should be called from PF driver's probe routine with >> + * device's mutex held. >> + * >> + * Returns 0 if PF is an SRIOV-capable device and >> + * value of numvfs valid, otherwise -EINVAL > > This says the only possible error is -EINVAL, but it can also return > -EIO! And the already-enabled case might be one that some drivers will > need to handle specially. > >> + */ >> +int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) >> +{ >> + if (!dev || !dev->is_physfn || (numvfs> dev->sriov->total)) >> + return -EINVAL; >> + >> + /* Shouldn't change if VFs already enabled */ >> + if (dev->sriov->ctrl& PCI_SRIOV_CTRL_VFE) >> + return -EIO; > [...] > > EBUSY seems a bit more appropriate. > > Ben. > ok. changed to -EBUSY & comment on return values. After looking at this area more, I created a pci_sriov_get_totalvfs() as well, and now use that in the pci-sysfs.c file as well.... much cleaner; symmetric to set. Makes backporting to those crazy enterprise releases w/kabi rules easier too! ;-) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index aeccc91..98c3d37 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -682,7 +682,6 @@ int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn) if (!dev->is_physfn) return -ENODEV; - return sriov_enable(dev, nr_virtfn); } EXPORT_SYMBOL_GPL(pci_enable_sriov); @@ -735,3 +734,29 @@ int pci_num_vf(struct pci_dev *dev) return dev->sriov->nr_virtfn; } EXPORT_SYMBOL_GPL(pci_num_vf); + +/** + * pci_sriov_set_totalvfs -- reduce the TotalVFs available + * @dev: the PCI PF device + * numvfs: number that should be used for TotalVFs supported + * + * Should be called from PF driver's probe routine with + * device's mutex held. + * + * Returns 0 if PF is an SRIOV-capable device and + * value of numvfs valid, otherwise -EINVAL + */ +int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) +{ + if (!dev || !dev->is_physfn || (numvfs > dev->sriov->total)) + return -EINVAL; + + /* Shouldn't change if VFs already enabled */ + if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE) + return -EIO; + else + dev->sriov->drvttl = numvfs; + + return 0; +} +EXPORT_SYMBOL_GPL(pci_sriov_set_totalvfs); diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 83be8ce..6333f82 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -412,7 +412,10 @@ static ssize_t sriov_totalvfs_show(struct device *dev, u16 total; pdev = to_pci_dev(dev); - total = pdev->sriov->total; + if (pdev->sriov->drvttl) + total = pdev->sriov->drvttl; + else + total = pdev->sriov->total; return sprintf(buf, "%u\n", total); } @@ -458,7 +461,10 @@ static ssize_t sriov_numvfs_store(struct device *dev, } /* if enabling vf's ... */ - total = pdev->sriov->total; + if (pdev->sriov->drvttl) + total = pdev->sriov->drvttl; + else + total = pdev->sriov->total; /* Requested VFs to enable < totalvfs and none enabled already */ if ((num_vfs > 0) && (num_vfs <= total)) { if (pdev->sriov->nr_virtfn == 0) { diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 6f6cd14..553bbba 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -240,6 +240,7 @@ struct pci_sriov { u16 stride; /* following VF stride */ u32 pgsz; /* page size for BAR alignment */ u8 link; /* Function Dependency Link */ + u16 drvttl; /* max num VFs driver supports */ struct pci_dev *dev; /* lowest numbered PF */ struct pci_dev *self; /* this PF */ struct mutex lock; /* lock for VF bus */ diff --git a/include/linux/pci.h b/include/linux/pci.h index 7ef8fba..1f58a03 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1611,6 +1611,7 @@ extern int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn); extern void pci_disable_sriov(struct pci_dev *dev); extern irqreturn_t pci_sriov_migration(struct pci_dev *dev); extern int pci_num_vf(struct pci_dev *dev); +extern int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs); #else static inline int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn) { @@ -1627,6 +1628,10 @@ static inline int pci_num_vf(struct pci_dev *dev) { return 0; } +static inline int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) +{ + return 0; +} #endif #if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE)
Some implementations of SRIOV provide a capability structure value of TotalVFs that is greater than what the software can support. Provide a method to reduce the capability structure reported value to the value the driver can support. This ensures sysfs reports the current capability of the system, hardware and software. Example for its use: igb & ixgbe -- report 8 & 64 as TotalVFs, but drivers only support 7 & 63 maximum. Signed-off-by: Donald Dutile <ddutile@redhat.com> --- drivers/pci/iov.c | 27 ++++++++++++++++++++++++++- drivers/pci/pci-sysfs.c | 10 ++++++++-- drivers/pci/pci.h | 1 + include/linux/pci.h | 5 +++++ 4 files changed, 40 insertions(+), 3 deletions(-)