| Message ID | 1351615741-24134-5-git-send-email-hongbo.zhang@linaro.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Sorry for late comments :( On 30 October 2012 22:19, hongbo.zhang <hongbo.zhang@linaro.org> wrote: > From: "hongbo.zhang" <hongbo.zhang@linaro.com> > > This diver is based on the thermal management framework in thermal_sys.c. A s/diver/driver > thermal zone device is created with the trip points to which cooling devices > can be bound, the current cooling device is cpufreq, e.g. CPU frequency is > clipped down to cool the CPU, and other cooling devices can be added and bound > to the trip points dynamically. The platform specific PRCMU interrupts are > used to active thermal update when trip points are reached. > > Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com> > --- > .../devicetree/bindings/thermal/db8500-thermal.txt | 40 ++ > drivers/thermal/Kconfig | 20 + > drivers/thermal/Makefile | 2 + > drivers/thermal/db8500_cpufreq_cooling.c | 108 +++++ > drivers/thermal/db8500_thermal.c | 531 +++++++++++++++++++++ > include/linux/platform_data/db8500_thermal.h | 38 ++ > 6 files changed, 739 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/db8500-thermal.txt > create mode 100644 drivers/thermal/db8500_cpufreq_cooling.c > create mode 100644 drivers/thermal/db8500_thermal.c > create mode 100644 include/linux/platform_data/db8500_thermal.h > > diff --git a/Documentation/devicetree/bindings/thermal/db8500-thermal.txt b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt > new file mode 100644 > index 0000000..cab6916 > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt > @@ -0,0 +1,40 @@ > +* ST-Ericsson DB8500 Thermal > + > +** Thermal node properties: > + > +- compatible : "stericsson,db8500-thermal"; > +- reg : address range of the thermal sensor registers; > +- interrupts : interrupts generated from PRCMU; > +- interrupt-names : "IRQ_HOTMON_LOW" and "IRQ_HOTMON_HIGH"; Just mention here that below properties are optional or required. > +- num-trips : number of total trip points; > +- tripN-temp : temperature of trip point N, should be in ascending order; > +- tripN-type : type of trip point N, should be one of "active" "passive" "hot" "critical"; > +- tripN-cdev-num : number of the cooling devices which can be bound to trip point N; > +- tripN-cdev-nameM : name of the No. M cooling device of trip point N; > diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c > +static int db8500_thermal_match_cdev(struct thermal_cooling_device *cdev, > + struct db8500_trip_point *trip_points) > +{ > + int i; > + char *cdev_name; > + > + if (!strlen(cdev->type)) > + return -EINVAL; > + > + for (i = 0; i < COOLING_DEV_MAX; i++) { > + cdev_name = trip_points->cdev_name[i]; > + if (!strcmp(cdev_name, cdev->type)) You can actually remove cdev_name variable. and use if (!strcmp(trip_points->cdev_name[i], cdev->type)) > + return 0; > + } > + > + return -ENODEV; > +} > +#ifdef CONFIG_OF > +static struct db8500_thsens_platform_data* > + db8500_thermal_parse_dt(struct platform_device *pdev) > +{ > + for (j = 0; j < tmp_data; j++) { > + sprintf(prop_name, "trip%d-cdev-name%d", i, j); > + if (of_property_read_string(np, prop_name, &tmp_str)) > + goto err_parse_dt; > + > + if (strlen(tmp_str) > THERMAL_NAME_LENGTH) > + goto err_parse_dt; > + > + strcpy(ptrips->trip_points[i].cdev_name[j], tmp_str); want to check if it is copied or not?? > + } > + } > + return ptrips; > + > +err_parse_dt: > + dev_err(&pdev->dev, "Parsing device tree data error.\n"); > + return NULL; > +} After these please add my: Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 10/30/2012 05:49 PM, hongbo.zhang wrote: > From: "hongbo.zhang" <hongbo.zhang@linaro.com> > > This diver is based on the thermal management framework in thermal_sys.c. A > thermal zone device is created with the trip points to which cooling devices > can be bound, the current cooling device is cpufreq, e.g. CPU frequency is > clipped down to cool the CPU, and other cooling devices can be added and bound > to the trip points dynamically. The platform specific PRCMU interrupts are > used to active thermal update when trip points are reached. > > Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com> [...] > +static struct db8500_thsens_platform_data* > + db8500_thermal_parse_dt(struct platform_device *pdev) > +{ > + struct db8500_thsens_platform_data *ptrips; > + struct device_node *np = pdev->dev.of_node; > + char prop_name[32]; > + const char *tmp_str; > + u32 tmp_data; > + int i, j; > + > + ptrips = devm_kzalloc(&pdev->dev, sizeof(*ptrips), GFP_KERNEL); > + if (!ptrips) > + return NULL; > + > + if (of_property_read_u32(np, "num-trips", &tmp_data)) > + goto err_parse_dt; > + > + if (tmp_data > THERMAL_MAX_TRIPS) > + goto err_parse_dt; > + > + ptrips->num_trips = tmp_data; > + > + for (i = 0; i < ptrips->num_trips; i++) { > + sprintf(prop_name, "trip%d-temp", i); > + if (of_property_read_u32(np, prop_name, &tmp_data)) > + goto err_parse_dt; > + > + ptrips->trip_points[i].temp = tmp_data; > + > + sprintf(prop_name, "trip%d-type", i); > + if (of_property_read_string(np, prop_name, &tmp_str)) > + goto err_parse_dt; > + > + if (!strcmp(tmp_str, "active")) > + ptrips->trip_points[i].type = THERMAL_TRIP_ACTIVE; > + else if (!strcmp(tmp_str, "passive")) > + ptrips->trip_points[i].type = THERMAL_TRIP_PASSIVE; > + else if (!strcmp(tmp_str, "hot")) > + ptrips->trip_points[i].type = THERMAL_TRIP_HOT; > + else if (!strcmp(tmp_str, "critical")) > + ptrips->trip_points[i].type = THERMAL_TRIP_CRITICAL; > + else > + goto err_parse_dt; > + > + sprintf(prop_name, "trip%d-cdev-num", i); > + if (of_property_read_u32(np, prop_name, &tmp_data)) > + goto err_parse_dt; > + > + if (tmp_data > COOLING_DEV_MAX) > + goto err_parse_dt; > + > + for (j = 0; j < tmp_data; j++) { > + sprintf(prop_name, "trip%d-cdev-name%d", i, j); > + if (of_property_read_string(np, prop_name, &tmp_str)) > + goto err_parse_dt; > + > + if (strlen(tmp_str) > THERMAL_NAME_LENGTH) > + goto err_parse_dt; > + > + strcpy(ptrips->trip_points[i].cdev_name[j], tmp_str); If strlen(tmp_str) equals THERMAL_NAME_LENGTH, strcpy() will go past the size of the destination array. After the above is fixed, you can add my: Reviewed-by: Francesco Lavra <francescolavra.fl@gmail.com> If you re-send a new version of the patch series, I suggest you do so in a new thread. Thanks, Francesco -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 1 November 2012 09:52, Zhang, Rui <rui.zhang@intel.com> wrote: > > >> -----Original Message----- >> From: hongbo.zhang [mailto:hongbo.zhang@linaro.org] >> Sent: Wednesday, October 31, 2012 12:49 AM >> To: linaro-dev@lists.linaro.org; linux-kernel@vger.kernel.org; linux- >> pm@vger.kernel.org; Zhang, Rui; amit.kachhap@linaro.org >> Cc: patches@linaro.org; linaro-kernel@lists.linaro.org; >> STEricsson_nomadik_linux@list.st.com; kernel@igloocommunity.org; >> hongbo.zhang >> Subject: [PATCH V3 4/5] Thermal: Add ST-Ericsson DB8500 thermal driver. >> Importance: High >> >> From: "hongbo.zhang" <hongbo.zhang@linaro.com> >> >> This diver is based on the thermal management framework in >> thermal_sys.c. A thermal zone device is created with the trip points to >> which cooling devices can be bound, the current cooling device is >> cpufreq, e.g. CPU frequency is clipped down to cool the CPU, and other >> cooling devices can be added and bound to the trip points dynamically. >> The platform specific PRCMU interrupts are used to active thermal >> update when trip points are reached. >> >> Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com> >> --- >> .../devicetree/bindings/thermal/db8500-thermal.txt | 40 ++ >> drivers/thermal/Kconfig | 20 + >> drivers/thermal/Makefile | 2 + >> drivers/thermal/db8500_cpufreq_cooling.c | 108 +++++ >> drivers/thermal/db8500_thermal.c | 531 >> +++++++++++++++++++++ >> include/linux/platform_data/db8500_thermal.h | 38 ++ >> 6 files changed, 739 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/thermal/db8500- >> thermal.txt >> create mode 100644 drivers/thermal/db8500_cpufreq_cooling.c >> create mode 100644 drivers/thermal/db8500_thermal.c create mode >> 100644 include/linux/platform_data/db8500_thermal.h >> >> diff --git a/Documentation/devicetree/bindings/thermal/db8500- >> thermal.txt b/Documentation/devicetree/bindings/thermal/db8500- >> thermal.txt >> new file mode 100644 >> index 0000000..cab6916 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt >> @@ -0,0 +1,40 @@ >> +* ST-Ericsson DB8500 Thermal >> + >> +** Thermal node properties: >> + >> +- compatible : "stericsson,db8500-thermal"; >> +- reg : address range of the thermal sensor registers; >> +- interrupts : interrupts generated from PRCMU; >> +- interrupt-names : "IRQ_HOTMON_LOW" and "IRQ_HOTMON_HIGH"; >> +- num-trips : number of total trip points; >> +- tripN-temp : temperature of trip point N, should be in ascending >> +order; >> +- tripN-type : type of trip point N, should be one of "active" >> +"passive" "hot" "critical"; >> +- tripN-cdev-num : number of the cooling devices which can be bound to >> +trip point N; >> +- tripN-cdev-nameM : name of the No. M cooling device of trip point N; >> + >> +Usually the num-trips and tripN-*** are separated in board related dts >> files. >> + >> +Example: >> +thermal@801573c0 { >> + compatible = "stericsson,db8500-thermal"; >> + reg = <0x801573c0 0x40>; >> + interrupts = <21 0x4>, <22 0x4>; >> + interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; >> + >> + num-trips = <3>; >> + >> + trip0-temp = <70000>; >> + trip0-type = "active"; >> + trip0-cdev-num = <1>; >> + trip0-cdev-name0 = "thermal-cpufreq-0"; >> + >> + trip1-temp = <75000>; >> + trip1-type = "active"; >> + trip1-cdev-num = <2>; >> + trip1-cdev-name0 = "thermal-cpufreq-0"; >> + trip1-cdev-name1 = "thermal-fan"; >> + >> + trip2-temp = <85000>; >> + trip2-type = "critical"; >> + trip2-cdev-num = <0>; >> +} >> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index >> e1cb6bd..54c8fd0 100644 >> --- a/drivers/thermal/Kconfig >> +++ b/drivers/thermal/Kconfig >> @@ -31,6 +31,26 @@ config CPU_THERMAL >> and not the ACPI interface. >> If you want this support, you should say Y here. >> >> +config DB8500_THERMAL >> + bool "DB8500 thermal management" >> + depends on THERMAL >> + default y >> + help >> + Adds DB8500 thermal management implementation according to the >> thermal >> + management framework. A thermal zone with several trip points >> will be >> + created. Cooling devices can be bound to the trip points to >> cool this >> + thermal zone if trip points reached. >> + >> +config DB8500_CPUFREQ_COOLING >> + tristate "DB8500 cpufreq cooling" >> + depends on CPU_THERMAL >> + default y >> + help >> + Adds DB8500 cpufreq cooling devices, and these cooling devices >> can be >> + bound to thermal zone trip points. When a trip point reached, >> the >> + bound cpufreq cooling device turns active to set CPU frequency >> low to >> + cool down the CPU. >> + >> config SPEAR_THERMAL >> bool "SPEAr thermal sensor driver" >> depends on THERMAL >> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index >> 885550d..c7a8dab 100644 >> --- a/drivers/thermal/Makefile >> +++ b/drivers/thermal/Makefile >> @@ -7,3 +7,5 @@ obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o >> obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o >> obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o >> obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o >> +obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o >> +obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o >> diff --git a/drivers/thermal/db8500_cpufreq_cooling.c >> b/drivers/thermal/db8500_cpufreq_cooling.c >> new file mode 100644 >> index 0000000..4cf8e72 >> --- /dev/null >> +++ b/drivers/thermal/db8500_cpufreq_cooling.c >> @@ -0,0 +1,108 @@ >> +/* >> + * db8500_cpufreq_cooling.c - DB8500 cpufreq works as cooling device. >> + * >> + * Copyright (C) 2012 ST-Ericsson >> + * Copyright (C) 2012 Linaro Ltd. >> + * >> + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> >> + * >> + * This program is free software; you can redistribute it and/or >> modify >> + * it under the terms of the GNU General Public License as published >> by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +#include <linux/cpu_cooling.h> >> +#include <linux/cpufreq.h> >> +#include <linux/err.h> >> +#include <linux/module.h> >> +#include <linux/platform_device.h> >> +#include <linux/slab.h> >> + >> +static int db8500_cpufreq_cooling_probe(struct platform_device *pdev) >> { >> + struct thermal_cooling_device *cdev; >> + struct cpumask mask_val; >> + >> + /* make sure cpufreq driver has been initialized */ >> + if (!cpufreq_frequency_get_table(0)) >> + return -EPROBE_DEFER; >> + >> + cpumask_set_cpu(0, &mask_val); >> + cdev = cpufreq_cooling_register(&mask_val); >> + >> + if (IS_ERR_OR_NULL(cdev)) { >> + dev_err(&pdev->dev, "Failed to register cooling device\n"); >> + return PTR_ERR(cdev); >> + } >> + >> + platform_set_drvdata(pdev, cdev); >> + >> + dev_info(&pdev->dev, "Cooling device registered: %s\n", cdev- >> >type); >> + >> + return 0; >> +} >> + >> +static int db8500_cpufreq_cooling_remove(struct platform_device *pdev) >> +{ >> + struct thermal_cooling_device *cdev = platform_get_drvdata(pdev); >> + >> + cpufreq_cooling_unregister(cdev); >> + >> + return 0; >> +} >> + >> +static int db8500_cpufreq_cooling_suspend(struct platform_device *pdev, >> + pm_message_t state) >> +{ >> + return -ENOSYS; >> +} >> + >> +static int db8500_cpufreq_cooling_resume(struct platform_device *pdev) >> +{ >> + return -ENOSYS; >> +} >> + >> +#ifdef CONFIG_OF >> +static const struct of_device_id db8500_cpufreq_cooling_match[] = { >> + { .compatible = "stericsson,db8500-cpufreq-cooling" }, >> + {}, >> +}; >> +#else >> +#define db8500_cpufreq_cooling_match NULL #endif >> + >> +static struct platform_driver db8500_cpufreq_cooling_driver = { >> + .driver = { >> + .owner = THIS_MODULE, >> + .name = "db8500-cpufreq-cooling", >> + .of_match_table = db8500_cpufreq_cooling_match, >> + }, >> + .probe = db8500_cpufreq_cooling_probe, >> + .suspend = db8500_cpufreq_cooling_suspend, >> + .resume = db8500_cpufreq_cooling_resume, >> + .remove = db8500_cpufreq_cooling_remove, }; >> + >> +static int __init db8500_cpufreq_cooling_init(void) { >> + return platform_driver_register(&db8500_cpufreq_cooling_driver); >> +} >> + >> +static void __exit db8500_cpufreq_cooling_exit(void) { >> + platform_driver_unregister(&db8500_cpufreq_cooling_driver); >> +} >> + >> +/* Should be later than db8500_cpufreq_register */ >> +late_initcall(db8500_cpufreq_cooling_init); >> +module_exit(db8500_cpufreq_cooling_exit); >> + >> +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>"); >> +MODULE_DESCRIPTION("DB8500 cpufreq cooling driver"); >> +MODULE_LICENSE("GPL"); >> diff --git a/drivers/thermal/db8500_thermal.c >> b/drivers/thermal/db8500_thermal.c >> new file mode 100644 >> index 0000000..023f7b4 >> --- /dev/null >> +++ b/drivers/thermal/db8500_thermal.c >> @@ -0,0 +1,531 @@ >> +/* >> + * db8500_thermal.c - DB8500 Thermal Management Implementation >> + * >> + * Copyright (C) 2012 ST-Ericsson >> + * Copyright (C) 2012 Linaro Ltd. >> + * >> + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> >> + * >> + * This program is free software; you can redistribute it and/or >> modify >> + * it under the terms of the GNU General Public License as published >> by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +#include <linux/cpu_cooling.h> >> +#include <linux/interrupt.h> >> +#include <linux/mfd/dbx500-prcmu.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/platform_data/db8500_thermal.h> >> +#include <linux/platform_device.h> >> +#include <linux/slab.h> >> +#include <linux/thermal.h> >> + >> +#define PRCMU_DEFAULT_MEASURE_TIME 0xFFF >> +#define PRCMU_DEFAULT_LOW_TEMP 0 >> + >> +struct db8500_thermal_zone { >> + struct thermal_zone_device *therm_dev; >> + struct mutex th_lock; >> + struct work_struct therm_work; >> + struct db8500_thsens_platform_data *trip_tab; >> + enum thermal_device_mode mode; >> + enum thermal_trend trend; >> + unsigned long cur_temp_pseudo; >> + unsigned int cur_index; >> +}; >> + >> +/* Local function to check if thermal zone matches cooling devices */ >> +static int db8500_thermal_match_cdev(struct thermal_cooling_device >> *cdev, >> + struct db8500_trip_point *trip_points) { >> + int i; >> + char *cdev_name; >> + >> + if (!strlen(cdev->type)) >> + return -EINVAL; >> + >> + for (i = 0; i < COOLING_DEV_MAX; i++) { >> + cdev_name = trip_points->cdev_name[i]; >> + if (!strcmp(cdev_name, cdev->type)) >> + return 0; >> + } >> + >> + return -ENODEV; >> +} >> + >> +/* Callback to bind cooling device to thermal zone */ static int >> +db8500_cdev_bind(struct thermal_zone_device *thermal, >> + struct thermal_cooling_device *cdev) >> +{ >> + struct db8500_thermal_zone *pzone = thermal->devdata; >> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >> + unsigned long max_state, upper, lower; >> + int i, ret = -EINVAL; >> + >> + for (i = 0; i < ptrips->num_trips; i++) { >> + if (db8500_thermal_match_cdev(cdev, &ptrips- >> >trip_points[i])) >> + continue; >> + >> + cdev->ops->get_max_state(cdev, &max_state); > > Why not moving this line out of the loop > so that you only need to call it once. Good. > >> + lower = upper = (i > max_state) ? max_state : i; >> + > > What does this mean? > Say cooling device 0 matches trip point 3, and you want to use cooling state 3 only, for trip point 3? > No matter how many cooling states the cooling device supports? I would like to change lower = upper - 1 > 0 ? upper - 1 : 0; More states for one trip point is meaningless on my platform, because thermal framework polling thread isn't used, a PRCMU firmware high/low interrupts are used to trigger thermal update instead(currently platform limitation), thus thermal update is called only once when trip point is crossed up/down. More states for one trip points can be used on our SOC serials in future when this limitation is removed. > > Thanks, > rui >> + ret = thermal_zone_bind_cooling_device(thermal, i, cdev, >> + upper, lower); >> + >> + dev_info(&cdev->device, "%s bind to %d: %d-%s\n", >> + cdev->type, i, ret, ret ? "fail" : "succeed"); >> + } >> + >> + return ret; >> +} >> + >> +/* Callback to unbind cooling device from thermal zone */ static int >> +db8500_cdev_unbind(struct thermal_zone_device *thermal, >> + struct thermal_cooling_device *cdev) >> +{ >> + struct db8500_thermal_zone *pzone = thermal->devdata; >> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >> + int i, ret = -EINVAL; >> + >> + for (i = 0; i < ptrips->num_trips; i++) { >> + if (db8500_thermal_match_cdev(cdev, &ptrips- >> >trip_points[i])) >> + continue; >> + >> + ret = thermal_zone_unbind_cooling_device(thermal, i, cdev); >> + >> + dev_info(&cdev->device, "%s unbind: %s\n", >> + cdev->type, ret ? "fail" : "succeed"); >> + } >> + >> + return ret; >> +} >> + >> +/* Callback to get current temperature */ static int >> +db8500_sys_get_temp(struct thermal_zone_device *thermal, >> + unsigned long *temp) >> +{ >> + struct db8500_thermal_zone *pzone = thermal->devdata; >> + >> + /* >> + * TODO: There is no PRCMU interface to get temperature data >> currently, >> + * so a pseudo temperature is returned , it works for thermal >> framework >> + * and this will be fixed when the PRCMU interface is available. >> + */ >> + *temp = pzone->cur_temp_pseudo; >> + >> + return 0; >> +} >> + >> +/* Callback to get temperature changing trend */ static int >> +db8500_sys_get_trend(struct thermal_zone_device *thermal, >> + int trip, enum thermal_trend *trend) >> +{ >> + struct db8500_thermal_zone *pzone = thermal->devdata; >> + >> + *trend = pzone->trend; >> + >> + return 0; >> +} >> + >> +/* Callback to get thermal zone mode */ static int >> +db8500_sys_get_mode(struct thermal_zone_device *thermal, >> + enum thermal_device_mode *mode) >> +{ >> + struct db8500_thermal_zone *pzone = thermal->devdata; >> + >> + mutex_lock(&pzone->th_lock); >> + *mode = pzone->mode; >> + mutex_unlock(&pzone->th_lock); >> + >> + return 0; >> +} >> + >> +/* Callback to set thermal zone mode */ static int >> +db8500_sys_set_mode(struct thermal_zone_device *thermal, >> + enum thermal_device_mode mode) >> +{ >> + struct db8500_thermal_zone *pzone = thermal->devdata; >> + >> + mutex_lock(&pzone->th_lock); >> + >> + pzone->mode = mode; >> + if (mode == THERMAL_DEVICE_ENABLED) >> + schedule_work(&pzone->therm_work); >> + >> + mutex_unlock(&pzone->th_lock); >> + >> + return 0; >> +} >> + >> +/* Callback to get trip point type */ >> +static int db8500_sys_get_trip_type(struct thermal_zone_device >> *thermal, >> + int trip, enum thermal_trip_type *type) { >> + struct db8500_thermal_zone *pzone = thermal->devdata; >> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >> + >> + if (trip >= ptrips->num_trips) >> + return -EINVAL; >> + >> + *type = ptrips->trip_points[trip].type; >> + >> + return 0; >> +} >> + >> +/* Callback to get trip point temperature */ static int >> +db8500_sys_get_trip_temp(struct thermal_zone_device *thermal, >> + int trip, unsigned long *temp) >> +{ >> + struct db8500_thermal_zone *pzone = thermal->devdata; >> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >> + >> + if (trip >= ptrips->num_trips) >> + return -EINVAL; >> + >> + *temp = ptrips->trip_points[trip].temp; >> + >> + return 0; >> +} >> + >> +/* Callback to get critical trip point temperature */ static int >> +db8500_sys_get_crit_temp(struct thermal_zone_device *thermal, >> + unsigned long *temp) >> +{ >> + struct db8500_thermal_zone *pzone = thermal->devdata; >> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >> + int i; >> + >> + for (i = ptrips->num_trips - 1; i > 0; i--) { >> + if (ptrips->trip_points[i].type == THERMAL_TRIP_CRITICAL) { >> + *temp = ptrips->trip_points[i].temp; >> + return 0; >> + } >> + } >> + >> + return -EINVAL; >> +} >> + >> +static struct thermal_zone_device_ops thdev_ops = { >> + .bind = db8500_cdev_bind, >> + .unbind = db8500_cdev_unbind, >> + .get_temp = db8500_sys_get_temp, >> + .get_trend = db8500_sys_get_trend, >> + .get_mode = db8500_sys_get_mode, >> + .set_mode = db8500_sys_set_mode, >> + .get_trip_type = db8500_sys_get_trip_type, >> + .get_trip_temp = db8500_sys_get_trip_temp, >> + .get_crit_temp = db8500_sys_get_crit_temp, }; >> + >> +static void db8500_thermal_update_config(struct db8500_thermal_zone >> *pzone, >> + unsigned int idx, enum thermal_trend trend, >> + unsigned long next_low, unsigned long next_high) { >> + pzone->cur_index = idx; >> + pzone->cur_temp_pseudo = (next_low + next_high)/2; >> + pzone->trend = trend; >> + >> + prcmu_stop_temp_sense(); >> + prcmu_config_hotmon((u8)(next_low/1000), (u8)(next_high/1000)); >> + prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME); >> +} >> + >> +static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data) { >> + struct db8500_thermal_zone *pzone = irq_data; >> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >> + unsigned int idx = pzone->cur_index; >> + unsigned long next_low, next_high; >> + >> + if (unlikely(idx == 0)) >> + /* Meaningless for thermal management, ignoring it */ >> + return IRQ_HANDLED; >> + >> + if (idx == 1) { >> + next_high = ptrips->trip_points[0].temp; >> + next_low = PRCMU_DEFAULT_LOW_TEMP; >> + } else { >> + next_high = ptrips->trip_points[idx-1].temp; >> + next_low = ptrips->trip_points[idx-2].temp; >> + } >> + idx -= 1; >> + >> + db8500_thermal_update_config(pzone, idx, THERMAL_TREND_DROPPING, >> + next_low, next_high); >> + >> + dev_dbg(&pzone->therm_dev->device, >> + "PRCMU set max %ld, min %ld\n", next_high, next_low); >> + >> + schedule_work(&pzone->therm_work); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data) { >> + struct db8500_thermal_zone *pzone = irq_data; >> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >> + unsigned int idx = pzone->cur_index; >> + unsigned long next_low, next_high; >> + >> + if (idx < ptrips->num_trips - 1) { >> + next_high = ptrips->trip_points[idx+1].temp; >> + next_low = ptrips->trip_points[idx].temp; >> + idx += 1; >> + >> + db8500_thermal_update_config(pzone, idx, >> THERMAL_TREND_RAISING, >> + next_low, next_high); >> + >> + dev_dbg(&pzone->therm_dev->device, >> + "PRCMU set max %ld, min %ld\n", next_high, next_low); >> + } else if (idx == ptrips->num_trips - 1) >> + pzone->cur_temp_pseudo = ptrips->trip_points[idx].temp + 1; >> + >> + schedule_work(&pzone->therm_work); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static void db8500_thermal_work(struct work_struct *work) { >> + enum thermal_device_mode cur_mode; >> + struct db8500_thermal_zone *pzone; >> + >> + pzone = container_of(work, struct db8500_thermal_zone, >> therm_work); >> + >> + mutex_lock(&pzone->th_lock); >> + cur_mode = pzone->mode; >> + mutex_unlock(&pzone->th_lock); >> + >> + if (cur_mode == THERMAL_DEVICE_DISABLED) >> + return; >> + >> + thermal_zone_device_update(pzone->therm_dev); >> + dev_dbg(&pzone->therm_dev->device, "thermal work finished.\n"); } >> + >> +#ifdef CONFIG_OF >> +static struct db8500_thsens_platform_data* >> + db8500_thermal_parse_dt(struct platform_device *pdev) { >> + struct db8500_thsens_platform_data *ptrips; >> + struct device_node *np = pdev->dev.of_node; >> + char prop_name[32]; >> + const char *tmp_str; >> + u32 tmp_data; >> + int i, j; >> + >> + ptrips = devm_kzalloc(&pdev->dev, sizeof(*ptrips), GFP_KERNEL); >> + if (!ptrips) >> + return NULL; >> + >> + if (of_property_read_u32(np, "num-trips", &tmp_data)) >> + goto err_parse_dt; >> + >> + if (tmp_data > THERMAL_MAX_TRIPS) >> + goto err_parse_dt; >> + >> + ptrips->num_trips = tmp_data; >> + >> + for (i = 0; i < ptrips->num_trips; i++) { >> + sprintf(prop_name, "trip%d-temp", i); >> + if (of_property_read_u32(np, prop_name, &tmp_data)) >> + goto err_parse_dt; >> + >> + ptrips->trip_points[i].temp = tmp_data; >> + >> + sprintf(prop_name, "trip%d-type", i); >> + if (of_property_read_string(np, prop_name, &tmp_str)) >> + goto err_parse_dt; >> + >> + if (!strcmp(tmp_str, "active")) >> + ptrips->trip_points[i].type = THERMAL_TRIP_ACTIVE; >> + else if (!strcmp(tmp_str, "passive")) >> + ptrips->trip_points[i].type = THERMAL_TRIP_PASSIVE; >> + else if (!strcmp(tmp_str, "hot")) >> + ptrips->trip_points[i].type = THERMAL_TRIP_HOT; >> + else if (!strcmp(tmp_str, "critical")) >> + ptrips->trip_points[i].type = THERMAL_TRIP_CRITICAL; >> + else >> + goto err_parse_dt; >> + >> + sprintf(prop_name, "trip%d-cdev-num", i); >> + if (of_property_read_u32(np, prop_name, &tmp_data)) >> + goto err_parse_dt; >> + >> + if (tmp_data > COOLING_DEV_MAX) >> + goto err_parse_dt; >> + >> + for (j = 0; j < tmp_data; j++) { >> + sprintf(prop_name, "trip%d-cdev-name%d", i, j); >> + if (of_property_read_string(np, prop_name, &tmp_str)) >> + goto err_parse_dt; >> + >> + if (strlen(tmp_str) > THERMAL_NAME_LENGTH) >> + goto err_parse_dt; >> + >> + strcpy(ptrips->trip_points[i].cdev_name[j], tmp_str); >> + } >> + } >> + return ptrips; >> + >> +err_parse_dt: >> + dev_err(&pdev->dev, "Parsing device tree data error.\n"); >> + return NULL; >> +} >> +#else >> +static inline struct db8500_thsens_platform_data* >> + db8500_thermal_parse_dt(struct platform_device *pdev) { >> + return NULL; >> +} >> +#endif >> + >> +static int db8500_thermal_probe(struct platform_device *pdev) { >> + struct db8500_thermal_zone *pzone = NULL; >> + struct db8500_thsens_platform_data *ptrips = NULL; >> + struct device_node *np = pdev->dev.of_node; >> + int low_irq, high_irq, ret = 0; >> + unsigned long dft_low, dft_high; >> + >> + if (np) >> + ptrips = db8500_thermal_parse_dt(pdev); >> + else >> + ptrips = dev_get_platdata(&pdev->dev); >> + >> + if (!ptrips) >> + return -EINVAL; >> + >> + pzone = devm_kzalloc(&pdev->dev, sizeof(*pzone), GFP_KERNEL); >> + if (!pzone) >> + return -ENOMEM; >> + >> + mutex_init(&pzone->th_lock); >> + mutex_lock(&pzone->th_lock); >> + >> + pzone->mode = THERMAL_DEVICE_DISABLED; >> + pzone->trip_tab = ptrips; >> + >> + dft_low = PRCMU_DEFAULT_LOW_TEMP; >> + dft_high = ptrips->trip_points[0].temp; >> + >> + db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE, >> + dft_low, dft_high); >> + >> + INIT_WORK(&pzone->therm_work, db8500_thermal_work); >> + >> + low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW"); >> + if (low_irq < 0) { >> + dev_err(&pdev->dev, "Get IRQ_HOTMON_LOW failed.\n"); >> + return low_irq; >> + } >> + >> + ret = devm_request_threaded_irq(&pdev->dev, low_irq, NULL, >> + prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, >> + "dbx500_temp_low", pzone); >> + if (ret < 0) { >> + dev_err(&pdev->dev, "Failed to allocate temp low irq.\n"); >> + return ret; >> + } >> + >> + high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH"); >> + if (high_irq < 0) { >> + dev_err(&pdev->dev, "Get IRQ_HOTMON_HIGH failed.\n"); >> + return high_irq; >> + } >> + >> + ret = devm_request_threaded_irq(&pdev->dev, high_irq, NULL, >> + prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, >> + "dbx500_temp_high", pzone); >> + if (ret < 0) { >> + dev_err(&pdev->dev, "Failed to allocate temp high irq.\n"); >> + return ret; >> + } >> + >> + pzone->therm_dev = >> thermal_zone_device_register("db8500_thermal_zone", >> + ptrips->num_trips, 0, pzone, &thdev_ops, 0, 0); >> + >> + if (IS_ERR_OR_NULL(pzone->therm_dev)) { >> + dev_err(&pdev->dev, "Register thermal zone device >> failed.\n"); >> + return PTR_ERR(pzone->therm_dev); >> + } >> + dev_info(&pdev->dev, "Thermal zone device registered.\n"); >> + >> + platform_set_drvdata(pdev, pzone); >> + pzone->mode = THERMAL_DEVICE_ENABLED; >> + mutex_unlock(&pzone->th_lock); >> + >> + return 0; >> +} >> + >> +static int db8500_thermal_remove(struct platform_device *pdev) { >> + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); >> + >> + thermal_zone_device_unregister(pzone->therm_dev); >> + cancel_work_sync(&pzone->therm_work); >> + mutex_destroy(&pzone->th_lock); >> + >> + return 0; >> +} >> + >> +static int db8500_thermal_suspend(struct platform_device *pdev, >> + pm_message_t state) >> +{ >> + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); >> + >> + flush_work_sync(&pzone->therm_work); >> + prcmu_stop_temp_sense(); >> + >> + return 0; >> +} >> + >> +static int db8500_thermal_resume(struct platform_device *pdev) { >> + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); >> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >> + unsigned long dft_low, dft_high; >> + >> + dft_low = PRCMU_DEFAULT_LOW_TEMP; >> + dft_high = ptrips->trip_points[0].temp; >> + >> + db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE, >> + dft_low, dft_high); >> + >> + return 0; >> +} >> + >> +#ifdef CONFIG_OF >> +static const struct of_device_id db8500_thermal_match[] = { >> + { .compatible = "stericsson,db8500-thermal" }, >> + {}, >> +}; >> +#else >> +#define db8500_thermal_match NULL >> +#endif >> + >> +static struct platform_driver db8500_thermal_driver = { >> + .driver = { >> + .owner = THIS_MODULE, >> + .name = "db8500-thermal", >> + .of_match_table = db8500_thermal_match, >> + }, >> + .probe = db8500_thermal_probe, >> + .suspend = db8500_thermal_suspend, >> + .resume = db8500_thermal_resume, >> + .remove = db8500_thermal_remove, >> +}; >> + >> +module_platform_driver(db8500_thermal_driver); >> + >> +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>"); >> +MODULE_DESCRIPTION("DB8500 thermal driver"); MODULE_LICENSE("GPL"); >> diff --git a/include/linux/platform_data/db8500_thermal.h >> b/include/linux/platform_data/db8500_thermal.h >> new file mode 100644 >> index 0000000..3bf6090 >> --- /dev/null >> +++ b/include/linux/platform_data/db8500_thermal.h >> @@ -0,0 +1,38 @@ >> +/* >> + * db8500_thermal.h - DB8500 Thermal Management Implementation >> + * >> + * Copyright (C) 2012 ST-Ericsson >> + * Copyright (C) 2012 Linaro Ltd. >> + * >> + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> >> + * >> + * This program is free software; you can redistribute it and/or >> modify >> + * it under the terms of the GNU General Public License as published >> by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +#ifndef _DB8500_THERMAL_H_ >> +#define _DB8500_THERMAL_H_ >> + >> +#include <linux/thermal.h> >> + >> +#define COOLING_DEV_MAX 8 >> + >> +struct db8500_trip_point { >> + unsigned long temp; >> + enum thermal_trip_type type; >> + char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH]; >> +}; >> + >> +struct db8500_thsens_platform_data { >> + struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS]; >> + int num_trips; >> +}; >> + >> +#endif /* _DB8500_THERMAL_H_ */ >> -- >> 1.7.11.3 > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 6 November 2012 18:17, Hongbo Zhang <hongbo.zhang@linaro.org> wrote: > On 1 November 2012 09:52, Zhang, Rui <rui.zhang@intel.com> wrote: >> >> >>> -----Original Message----- >>> From: hongbo.zhang [mailto:hongbo.zhang@linaro.org] >>> Sent: Wednesday, October 31, 2012 12:49 AM >>> To: linaro-dev@lists.linaro.org; linux-kernel@vger.kernel.org; linux- >>> pm@vger.kernel.org; Zhang, Rui; amit.kachhap@linaro.org >>> Cc: patches@linaro.org; linaro-kernel@lists.linaro.org; >>> STEricsson_nomadik_linux@list.st.com; kernel@igloocommunity.org; >>> hongbo.zhang >>> Subject: [PATCH V3 4/5] Thermal: Add ST-Ericsson DB8500 thermal driver. >>> Importance: High >>> >>> From: "hongbo.zhang" <hongbo.zhang@linaro.com> >>> >>> This diver is based on the thermal management framework in >>> thermal_sys.c. A thermal zone device is created with the trip points to >>> which cooling devices can be bound, the current cooling device is >>> cpufreq, e.g. CPU frequency is clipped down to cool the CPU, and other >>> cooling devices can be added and bound to the trip points dynamically. >>> The platform specific PRCMU interrupts are used to active thermal >>> update when trip points are reached. >>> >>> Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com> >>> --- >>> .../devicetree/bindings/thermal/db8500-thermal.txt | 40 ++ >>> drivers/thermal/Kconfig | 20 + >>> drivers/thermal/Makefile | 2 + >>> drivers/thermal/db8500_cpufreq_cooling.c | 108 +++++ >>> drivers/thermal/db8500_thermal.c | 531 >>> +++++++++++++++++++++ >>> include/linux/platform_data/db8500_thermal.h | 38 ++ >>> 6 files changed, 739 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/thermal/db8500- >>> thermal.txt >>> create mode 100644 drivers/thermal/db8500_cpufreq_cooling.c >>> create mode 100644 drivers/thermal/db8500_thermal.c create mode >>> 100644 include/linux/platform_data/db8500_thermal.h >>> >>> diff --git a/Documentation/devicetree/bindings/thermal/db8500- >>> thermal.txt b/Documentation/devicetree/bindings/thermal/db8500- >>> thermal.txt >>> new file mode 100644 >>> index 0000000..cab6916 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt >>> @@ -0,0 +1,40 @@ >>> +* ST-Ericsson DB8500 Thermal >>> + >>> +** Thermal node properties: >>> + >>> +- compatible : "stericsson,db8500-thermal"; >>> +- reg : address range of the thermal sensor registers; >>> +- interrupts : interrupts generated from PRCMU; >>> +- interrupt-names : "IRQ_HOTMON_LOW" and "IRQ_HOTMON_HIGH"; >>> +- num-trips : number of total trip points; >>> +- tripN-temp : temperature of trip point N, should be in ascending >>> +order; >>> +- tripN-type : type of trip point N, should be one of "active" >>> +"passive" "hot" "critical"; >>> +- tripN-cdev-num : number of the cooling devices which can be bound to >>> +trip point N; >>> +- tripN-cdev-nameM : name of the No. M cooling device of trip point N; >>> + >>> +Usually the num-trips and tripN-*** are separated in board related dts >>> files. >>> + >>> +Example: >>> +thermal@801573c0 { >>> + compatible = "stericsson,db8500-thermal"; >>> + reg = <0x801573c0 0x40>; >>> + interrupts = <21 0x4>, <22 0x4>; >>> + interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; >>> + >>> + num-trips = <3>; >>> + >>> + trip0-temp = <70000>; >>> + trip0-type = "active"; >>> + trip0-cdev-num = <1>; >>> + trip0-cdev-name0 = "thermal-cpufreq-0"; >>> + >>> + trip1-temp = <75000>; >>> + trip1-type = "active"; >>> + trip1-cdev-num = <2>; >>> + trip1-cdev-name0 = "thermal-cpufreq-0"; >>> + trip1-cdev-name1 = "thermal-fan"; >>> + >>> + trip2-temp = <85000>; >>> + trip2-type = "critical"; >>> + trip2-cdev-num = <0>; >>> +} >>> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index >>> e1cb6bd..54c8fd0 100644 >>> --- a/drivers/thermal/Kconfig >>> +++ b/drivers/thermal/Kconfig >>> @@ -31,6 +31,26 @@ config CPU_THERMAL >>> and not the ACPI interface. >>> If you want this support, you should say Y here. >>> >>> +config DB8500_THERMAL >>> + bool "DB8500 thermal management" >>> + depends on THERMAL >>> + default y >>> + help >>> + Adds DB8500 thermal management implementation according to the >>> thermal >>> + management framework. A thermal zone with several trip points >>> will be >>> + created. Cooling devices can be bound to the trip points to >>> cool this >>> + thermal zone if trip points reached. >>> + >>> +config DB8500_CPUFREQ_COOLING >>> + tristate "DB8500 cpufreq cooling" >>> + depends on CPU_THERMAL >>> + default y >>> + help >>> + Adds DB8500 cpufreq cooling devices, and these cooling devices >>> can be >>> + bound to thermal zone trip points. When a trip point reached, >>> the >>> + bound cpufreq cooling device turns active to set CPU frequency >>> low to >>> + cool down the CPU. >>> + >>> config SPEAR_THERMAL >>> bool "SPEAr thermal sensor driver" >>> depends on THERMAL >>> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index >>> 885550d..c7a8dab 100644 >>> --- a/drivers/thermal/Makefile >>> +++ b/drivers/thermal/Makefile >>> @@ -7,3 +7,5 @@ obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o >>> obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o >>> obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o >>> obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o >>> +obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o >>> +obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o >>> diff --git a/drivers/thermal/db8500_cpufreq_cooling.c >>> b/drivers/thermal/db8500_cpufreq_cooling.c >>> new file mode 100644 >>> index 0000000..4cf8e72 >>> --- /dev/null >>> +++ b/drivers/thermal/db8500_cpufreq_cooling.c >>> @@ -0,0 +1,108 @@ >>> +/* >>> + * db8500_cpufreq_cooling.c - DB8500 cpufreq works as cooling device. >>> + * >>> + * Copyright (C) 2012 ST-Ericsson >>> + * Copyright (C) 2012 Linaro Ltd. >>> + * >>> + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> >>> + * >>> + * This program is free software; you can redistribute it and/or >>> modify >>> + * it under the terms of the GNU General Public License as published >>> by >>> + * the Free Software Foundation; either version 2 of the License, or >>> + * (at your option) any later version. >>> + * >>> + * This program is distributed in the hope that it will be useful, >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> + * GNU General Public License for more details. >>> + */ >>> + >>> +#include <linux/cpu_cooling.h> >>> +#include <linux/cpufreq.h> >>> +#include <linux/err.h> >>> +#include <linux/module.h> >>> +#include <linux/platform_device.h> >>> +#include <linux/slab.h> >>> + >>> +static int db8500_cpufreq_cooling_probe(struct platform_device *pdev) >>> { >>> + struct thermal_cooling_device *cdev; >>> + struct cpumask mask_val; >>> + >>> + /* make sure cpufreq driver has been initialized */ >>> + if (!cpufreq_frequency_get_table(0)) >>> + return -EPROBE_DEFER; >>> + >>> + cpumask_set_cpu(0, &mask_val); >>> + cdev = cpufreq_cooling_register(&mask_val); >>> + >>> + if (IS_ERR_OR_NULL(cdev)) { >>> + dev_err(&pdev->dev, "Failed to register cooling device\n"); >>> + return PTR_ERR(cdev); >>> + } >>> + >>> + platform_set_drvdata(pdev, cdev); >>> + >>> + dev_info(&pdev->dev, "Cooling device registered: %s\n", cdev- >>> >type); >>> + >>> + return 0; >>> +} >>> + >>> +static int db8500_cpufreq_cooling_remove(struct platform_device *pdev) >>> +{ >>> + struct thermal_cooling_device *cdev = platform_get_drvdata(pdev); >>> + >>> + cpufreq_cooling_unregister(cdev); >>> + >>> + return 0; >>> +} >>> + >>> +static int db8500_cpufreq_cooling_suspend(struct platform_device *pdev, >>> + pm_message_t state) >>> +{ >>> + return -ENOSYS; >>> +} >>> + >>> +static int db8500_cpufreq_cooling_resume(struct platform_device *pdev) >>> +{ >>> + return -ENOSYS; >>> +} >>> + >>> +#ifdef CONFIG_OF >>> +static const struct of_device_id db8500_cpufreq_cooling_match[] = { >>> + { .compatible = "stericsson,db8500-cpufreq-cooling" }, >>> + {}, >>> +}; >>> +#else >>> +#define db8500_cpufreq_cooling_match NULL #endif >>> + >>> +static struct platform_driver db8500_cpufreq_cooling_driver = { >>> + .driver = { >>> + .owner = THIS_MODULE, >>> + .name = "db8500-cpufreq-cooling", >>> + .of_match_table = db8500_cpufreq_cooling_match, >>> + }, >>> + .probe = db8500_cpufreq_cooling_probe, >>> + .suspend = db8500_cpufreq_cooling_suspend, >>> + .resume = db8500_cpufreq_cooling_resume, >>> + .remove = db8500_cpufreq_cooling_remove, }; >>> + >>> +static int __init db8500_cpufreq_cooling_init(void) { >>> + return platform_driver_register(&db8500_cpufreq_cooling_driver); >>> +} >>> + >>> +static void __exit db8500_cpufreq_cooling_exit(void) { >>> + platform_driver_unregister(&db8500_cpufreq_cooling_driver); >>> +} >>> + >>> +/* Should be later than db8500_cpufreq_register */ >>> +late_initcall(db8500_cpufreq_cooling_init); >>> +module_exit(db8500_cpufreq_cooling_exit); >>> + >>> +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>"); >>> +MODULE_DESCRIPTION("DB8500 cpufreq cooling driver"); >>> +MODULE_LICENSE("GPL"); >>> diff --git a/drivers/thermal/db8500_thermal.c >>> b/drivers/thermal/db8500_thermal.c >>> new file mode 100644 >>> index 0000000..023f7b4 >>> --- /dev/null >>> +++ b/drivers/thermal/db8500_thermal.c >>> @@ -0,0 +1,531 @@ >>> +/* >>> + * db8500_thermal.c - DB8500 Thermal Management Implementation >>> + * >>> + * Copyright (C) 2012 ST-Ericsson >>> + * Copyright (C) 2012 Linaro Ltd. >>> + * >>> + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> >>> + * >>> + * This program is free software; you can redistribute it and/or >>> modify >>> + * it under the terms of the GNU General Public License as published >>> by >>> + * the Free Software Foundation; either version 2 of the License, or >>> + * (at your option) any later version. >>> + * >>> + * This program is distributed in the hope that it will be useful, >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> + * GNU General Public License for more details. >>> + */ >>> + >>> +#include <linux/cpu_cooling.h> >>> +#include <linux/interrupt.h> >>> +#include <linux/mfd/dbx500-prcmu.h> >>> +#include <linux/module.h> >>> +#include <linux/of.h> >>> +#include <linux/platform_data/db8500_thermal.h> >>> +#include <linux/platform_device.h> >>> +#include <linux/slab.h> >>> +#include <linux/thermal.h> >>> + >>> +#define PRCMU_DEFAULT_MEASURE_TIME 0xFFF >>> +#define PRCMU_DEFAULT_LOW_TEMP 0 >>> + >>> +struct db8500_thermal_zone { >>> + struct thermal_zone_device *therm_dev; >>> + struct mutex th_lock; >>> + struct work_struct therm_work; >>> + struct db8500_thsens_platform_data *trip_tab; >>> + enum thermal_device_mode mode; >>> + enum thermal_trend trend; >>> + unsigned long cur_temp_pseudo; >>> + unsigned int cur_index; >>> +}; >>> + >>> +/* Local function to check if thermal zone matches cooling devices */ >>> +static int db8500_thermal_match_cdev(struct thermal_cooling_device >>> *cdev, >>> + struct db8500_trip_point *trip_points) { >>> + int i; >>> + char *cdev_name; >>> + >>> + if (!strlen(cdev->type)) >>> + return -EINVAL; >>> + >>> + for (i = 0; i < COOLING_DEV_MAX; i++) { >>> + cdev_name = trip_points->cdev_name[i]; >>> + if (!strcmp(cdev_name, cdev->type)) >>> + return 0; >>> + } >>> + >>> + return -ENODEV; >>> +} >>> + >>> +/* Callback to bind cooling device to thermal zone */ static int >>> +db8500_cdev_bind(struct thermal_zone_device *thermal, >>> + struct thermal_cooling_device *cdev) >>> +{ >>> + struct db8500_thermal_zone *pzone = thermal->devdata; >>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >>> + unsigned long max_state, upper, lower; >>> + int i, ret = -EINVAL; >>> + >>> + for (i = 0; i < ptrips->num_trips; i++) { >>> + if (db8500_thermal_match_cdev(cdev, &ptrips- >>> >trip_points[i])) >>> + continue; >>> + >>> + cdev->ops->get_max_state(cdev, &max_state); >> >> Why not moving this line out of the loop >> so that you only need to call it once. > Good. > >> >>> + lower = upper = (i > max_state) ? max_state : i; >>> + >> >> What does this mean? >> Say cooling device 0 matches trip point 3, and you want to use cooling state 3 only, for trip point 3? >> No matter how many cooling states the cooling device supports? > I would like to change lower = upper - 1 > 0 ? upper - 1 : 0; > More states for one trip point is meaningless on my platform, because > thermal framework polling thread isn't used, a PRCMU firmware high/low > interrupts are used to trigger thermal update instead(currently > platform limitation), thus thermal update is called only once when > trip point is crossed up/down. > More states for one trip points can be used on our SOC serials in > future when this limitation is removed. Sorry for update: callback this "lower = upper - 1 > 0 ? upper - 1 : 0;" current setting works as explained above, this is platform specific. >> >> Thanks, >> rui >>> + ret = thermal_zone_bind_cooling_device(thermal, i, cdev, >>> + upper, lower); >>> + >>> + dev_info(&cdev->device, "%s bind to %d: %d-%s\n", >>> + cdev->type, i, ret, ret ? "fail" : "succeed"); >>> + } >>> + >>> + return ret; >>> +} >>> + >>> +/* Callback to unbind cooling device from thermal zone */ static int >>> +db8500_cdev_unbind(struct thermal_zone_device *thermal, >>> + struct thermal_cooling_device *cdev) >>> +{ >>> + struct db8500_thermal_zone *pzone = thermal->devdata; >>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >>> + int i, ret = -EINVAL; >>> + >>> + for (i = 0; i < ptrips->num_trips; i++) { >>> + if (db8500_thermal_match_cdev(cdev, &ptrips- >>> >trip_points[i])) >>> + continue; >>> + >>> + ret = thermal_zone_unbind_cooling_device(thermal, i, cdev); >>> + >>> + dev_info(&cdev->device, "%s unbind: %s\n", >>> + cdev->type, ret ? "fail" : "succeed"); >>> + } >>> + >>> + return ret; >>> +} >>> + >>> +/* Callback to get current temperature */ static int >>> +db8500_sys_get_temp(struct thermal_zone_device *thermal, >>> + unsigned long *temp) >>> +{ >>> + struct db8500_thermal_zone *pzone = thermal->devdata; >>> + >>> + /* >>> + * TODO: There is no PRCMU interface to get temperature data >>> currently, >>> + * so a pseudo temperature is returned , it works for thermal >>> framework >>> + * and this will be fixed when the PRCMU interface is available. >>> + */ >>> + *temp = pzone->cur_temp_pseudo; >>> + >>> + return 0; >>> +} >>> + >>> +/* Callback to get temperature changing trend */ static int >>> +db8500_sys_get_trend(struct thermal_zone_device *thermal, >>> + int trip, enum thermal_trend *trend) >>> +{ >>> + struct db8500_thermal_zone *pzone = thermal->devdata; >>> + >>> + *trend = pzone->trend; >>> + >>> + return 0; >>> +} >>> + >>> +/* Callback to get thermal zone mode */ static int >>> +db8500_sys_get_mode(struct thermal_zone_device *thermal, >>> + enum thermal_device_mode *mode) >>> +{ >>> + struct db8500_thermal_zone *pzone = thermal->devdata; >>> + >>> + mutex_lock(&pzone->th_lock); >>> + *mode = pzone->mode; >>> + mutex_unlock(&pzone->th_lock); >>> + >>> + return 0; >>> +} >>> + >>> +/* Callback to set thermal zone mode */ static int >>> +db8500_sys_set_mode(struct thermal_zone_device *thermal, >>> + enum thermal_device_mode mode) >>> +{ >>> + struct db8500_thermal_zone *pzone = thermal->devdata; >>> + >>> + mutex_lock(&pzone->th_lock); >>> + >>> + pzone->mode = mode; >>> + if (mode == THERMAL_DEVICE_ENABLED) >>> + schedule_work(&pzone->therm_work); >>> + >>> + mutex_unlock(&pzone->th_lock); >>> + >>> + return 0; >>> +} >>> + >>> +/* Callback to get trip point type */ >>> +static int db8500_sys_get_trip_type(struct thermal_zone_device >>> *thermal, >>> + int trip, enum thermal_trip_type *type) { >>> + struct db8500_thermal_zone *pzone = thermal->devdata; >>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >>> + >>> + if (trip >= ptrips->num_trips) >>> + return -EINVAL; >>> + >>> + *type = ptrips->trip_points[trip].type; >>> + >>> + return 0; >>> +} >>> + >>> +/* Callback to get trip point temperature */ static int >>> +db8500_sys_get_trip_temp(struct thermal_zone_device *thermal, >>> + int trip, unsigned long *temp) >>> +{ >>> + struct db8500_thermal_zone *pzone = thermal->devdata; >>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >>> + >>> + if (trip >= ptrips->num_trips) >>> + return -EINVAL; >>> + >>> + *temp = ptrips->trip_points[trip].temp; >>> + >>> + return 0; >>> +} >>> + >>> +/* Callback to get critical trip point temperature */ static int >>> +db8500_sys_get_crit_temp(struct thermal_zone_device *thermal, >>> + unsigned long *temp) >>> +{ >>> + struct db8500_thermal_zone *pzone = thermal->devdata; >>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >>> + int i; >>> + >>> + for (i = ptrips->num_trips - 1; i > 0; i--) { >>> + if (ptrips->trip_points[i].type == THERMAL_TRIP_CRITICAL) { >>> + *temp = ptrips->trip_points[i].temp; >>> + return 0; >>> + } >>> + } >>> + >>> + return -EINVAL; >>> +} >>> + >>> +static struct thermal_zone_device_ops thdev_ops = { >>> + .bind = db8500_cdev_bind, >>> + .unbind = db8500_cdev_unbind, >>> + .get_temp = db8500_sys_get_temp, >>> + .get_trend = db8500_sys_get_trend, >>> + .get_mode = db8500_sys_get_mode, >>> + .set_mode = db8500_sys_set_mode, >>> + .get_trip_type = db8500_sys_get_trip_type, >>> + .get_trip_temp = db8500_sys_get_trip_temp, >>> + .get_crit_temp = db8500_sys_get_crit_temp, }; >>> + >>> +static void db8500_thermal_update_config(struct db8500_thermal_zone >>> *pzone, >>> + unsigned int idx, enum thermal_trend trend, >>> + unsigned long next_low, unsigned long next_high) { >>> + pzone->cur_index = idx; >>> + pzone->cur_temp_pseudo = (next_low + next_high)/2; >>> + pzone->trend = trend; >>> + >>> + prcmu_stop_temp_sense(); >>> + prcmu_config_hotmon((u8)(next_low/1000), (u8)(next_high/1000)); >>> + prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME); >>> +} >>> + >>> +static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data) { >>> + struct db8500_thermal_zone *pzone = irq_data; >>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >>> + unsigned int idx = pzone->cur_index; >>> + unsigned long next_low, next_high; >>> + >>> + if (unlikely(idx == 0)) >>> + /* Meaningless for thermal management, ignoring it */ >>> + return IRQ_HANDLED; >>> + >>> + if (idx == 1) { >>> + next_high = ptrips->trip_points[0].temp; >>> + next_low = PRCMU_DEFAULT_LOW_TEMP; >>> + } else { >>> + next_high = ptrips->trip_points[idx-1].temp; >>> + next_low = ptrips->trip_points[idx-2].temp; >>> + } >>> + idx -= 1; >>> + >>> + db8500_thermal_update_config(pzone, idx, THERMAL_TREND_DROPPING, >>> + next_low, next_high); >>> + >>> + dev_dbg(&pzone->therm_dev->device, >>> + "PRCMU set max %ld, min %ld\n", next_high, next_low); >>> + >>> + schedule_work(&pzone->therm_work); >>> + >>> + return IRQ_HANDLED; >>> +} >>> + >>> +static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data) { >>> + struct db8500_thermal_zone *pzone = irq_data; >>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >>> + unsigned int idx = pzone->cur_index; >>> + unsigned long next_low, next_high; >>> + >>> + if (idx < ptrips->num_trips - 1) { >>> + next_high = ptrips->trip_points[idx+1].temp; >>> + next_low = ptrips->trip_points[idx].temp; >>> + idx += 1; >>> + >>> + db8500_thermal_update_config(pzone, idx, >>> THERMAL_TREND_RAISING, >>> + next_low, next_high); >>> + >>> + dev_dbg(&pzone->therm_dev->device, >>> + "PRCMU set max %ld, min %ld\n", next_high, next_low); >>> + } else if (idx == ptrips->num_trips - 1) >>> + pzone->cur_temp_pseudo = ptrips->trip_points[idx].temp + 1; >>> + >>> + schedule_work(&pzone->therm_work); >>> + >>> + return IRQ_HANDLED; >>> +} >>> + >>> +static void db8500_thermal_work(struct work_struct *work) { >>> + enum thermal_device_mode cur_mode; >>> + struct db8500_thermal_zone *pzone; >>> + >>> + pzone = container_of(work, struct db8500_thermal_zone, >>> therm_work); >>> + >>> + mutex_lock(&pzone->th_lock); >>> + cur_mode = pzone->mode; >>> + mutex_unlock(&pzone->th_lock); >>> + >>> + if (cur_mode == THERMAL_DEVICE_DISABLED) >>> + return; >>> + >>> + thermal_zone_device_update(pzone->therm_dev); >>> + dev_dbg(&pzone->therm_dev->device, "thermal work finished.\n"); } >>> + >>> +#ifdef CONFIG_OF >>> +static struct db8500_thsens_platform_data* >>> + db8500_thermal_parse_dt(struct platform_device *pdev) { >>> + struct db8500_thsens_platform_data *ptrips; >>> + struct device_node *np = pdev->dev.of_node; >>> + char prop_name[32]; >>> + const char *tmp_str; >>> + u32 tmp_data; >>> + int i, j; >>> + >>> + ptrips = devm_kzalloc(&pdev->dev, sizeof(*ptrips), GFP_KERNEL); >>> + if (!ptrips) >>> + return NULL; >>> + >>> + if (of_property_read_u32(np, "num-trips", &tmp_data)) >>> + goto err_parse_dt; >>> + >>> + if (tmp_data > THERMAL_MAX_TRIPS) >>> + goto err_parse_dt; >>> + >>> + ptrips->num_trips = tmp_data; >>> + >>> + for (i = 0; i < ptrips->num_trips; i++) { >>> + sprintf(prop_name, "trip%d-temp", i); >>> + if (of_property_read_u32(np, prop_name, &tmp_data)) >>> + goto err_parse_dt; >>> + >>> + ptrips->trip_points[i].temp = tmp_data; >>> + >>> + sprintf(prop_name, "trip%d-type", i); >>> + if (of_property_read_string(np, prop_name, &tmp_str)) >>> + goto err_parse_dt; >>> + >>> + if (!strcmp(tmp_str, "active")) >>> + ptrips->trip_points[i].type = THERMAL_TRIP_ACTIVE; >>> + else if (!strcmp(tmp_str, "passive")) >>> + ptrips->trip_points[i].type = THERMAL_TRIP_PASSIVE; >>> + else if (!strcmp(tmp_str, "hot")) >>> + ptrips->trip_points[i].type = THERMAL_TRIP_HOT; >>> + else if (!strcmp(tmp_str, "critical")) >>> + ptrips->trip_points[i].type = THERMAL_TRIP_CRITICAL; >>> + else >>> + goto err_parse_dt; >>> + >>> + sprintf(prop_name, "trip%d-cdev-num", i); >>> + if (of_property_read_u32(np, prop_name, &tmp_data)) >>> + goto err_parse_dt; >>> + >>> + if (tmp_data > COOLING_DEV_MAX) >>> + goto err_parse_dt; >>> + >>> + for (j = 0; j < tmp_data; j++) { >>> + sprintf(prop_name, "trip%d-cdev-name%d", i, j); >>> + if (of_property_read_string(np, prop_name, &tmp_str)) >>> + goto err_parse_dt; >>> + >>> + if (strlen(tmp_str) > THERMAL_NAME_LENGTH) >>> + goto err_parse_dt; >>> + >>> + strcpy(ptrips->trip_points[i].cdev_name[j], tmp_str); >>> + } >>> + } >>> + return ptrips; >>> + >>> +err_parse_dt: >>> + dev_err(&pdev->dev, "Parsing device tree data error.\n"); >>> + return NULL; >>> +} >>> +#else >>> +static inline struct db8500_thsens_platform_data* >>> + db8500_thermal_parse_dt(struct platform_device *pdev) { >>> + return NULL; >>> +} >>> +#endif >>> + >>> +static int db8500_thermal_probe(struct platform_device *pdev) { >>> + struct db8500_thermal_zone *pzone = NULL; >>> + struct db8500_thsens_platform_data *ptrips = NULL; >>> + struct device_node *np = pdev->dev.of_node; >>> + int low_irq, high_irq, ret = 0; >>> + unsigned long dft_low, dft_high; >>> + >>> + if (np) >>> + ptrips = db8500_thermal_parse_dt(pdev); >>> + else >>> + ptrips = dev_get_platdata(&pdev->dev); >>> + >>> + if (!ptrips) >>> + return -EINVAL; >>> + >>> + pzone = devm_kzalloc(&pdev->dev, sizeof(*pzone), GFP_KERNEL); >>> + if (!pzone) >>> + return -ENOMEM; >>> + >>> + mutex_init(&pzone->th_lock); >>> + mutex_lock(&pzone->th_lock); >>> + >>> + pzone->mode = THERMAL_DEVICE_DISABLED; >>> + pzone->trip_tab = ptrips; >>> + >>> + dft_low = PRCMU_DEFAULT_LOW_TEMP; >>> + dft_high = ptrips->trip_points[0].temp; >>> + >>> + db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE, >>> + dft_low, dft_high); >>> + >>> + INIT_WORK(&pzone->therm_work, db8500_thermal_work); >>> + >>> + low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW"); >>> + if (low_irq < 0) { >>> + dev_err(&pdev->dev, "Get IRQ_HOTMON_LOW failed.\n"); >>> + return low_irq; >>> + } >>> + >>> + ret = devm_request_threaded_irq(&pdev->dev, low_irq, NULL, >>> + prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, >>> + "dbx500_temp_low", pzone); >>> + if (ret < 0) { >>> + dev_err(&pdev->dev, "Failed to allocate temp low irq.\n"); >>> + return ret; >>> + } >>> + >>> + high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH"); >>> + if (high_irq < 0) { >>> + dev_err(&pdev->dev, "Get IRQ_HOTMON_HIGH failed.\n"); >>> + return high_irq; >>> + } >>> + >>> + ret = devm_request_threaded_irq(&pdev->dev, high_irq, NULL, >>> + prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, >>> + "dbx500_temp_high", pzone); >>> + if (ret < 0) { >>> + dev_err(&pdev->dev, "Failed to allocate temp high irq.\n"); >>> + return ret; >>> + } >>> + >>> + pzone->therm_dev = >>> thermal_zone_device_register("db8500_thermal_zone", >>> + ptrips->num_trips, 0, pzone, &thdev_ops, 0, 0); >>> + >>> + if (IS_ERR_OR_NULL(pzone->therm_dev)) { >>> + dev_err(&pdev->dev, "Register thermal zone device >>> failed.\n"); >>> + return PTR_ERR(pzone->therm_dev); >>> + } >>> + dev_info(&pdev->dev, "Thermal zone device registered.\n"); >>> + >>> + platform_set_drvdata(pdev, pzone); >>> + pzone->mode = THERMAL_DEVICE_ENABLED; >>> + mutex_unlock(&pzone->th_lock); >>> + >>> + return 0; >>> +} >>> + >>> +static int db8500_thermal_remove(struct platform_device *pdev) { >>> + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); >>> + >>> + thermal_zone_device_unregister(pzone->therm_dev); >>> + cancel_work_sync(&pzone->therm_work); >>> + mutex_destroy(&pzone->th_lock); >>> + >>> + return 0; >>> +} >>> + >>> +static int db8500_thermal_suspend(struct platform_device *pdev, >>> + pm_message_t state) >>> +{ >>> + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); >>> + >>> + flush_work_sync(&pzone->therm_work); >>> + prcmu_stop_temp_sense(); >>> + >>> + return 0; >>> +} >>> + >>> +static int db8500_thermal_resume(struct platform_device *pdev) { >>> + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); >>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; >>> + unsigned long dft_low, dft_high; >>> + >>> + dft_low = PRCMU_DEFAULT_LOW_TEMP; >>> + dft_high = ptrips->trip_points[0].temp; >>> + >>> + db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE, >>> + dft_low, dft_high); >>> + >>> + return 0; >>> +} >>> + >>> +#ifdef CONFIG_OF >>> +static const struct of_device_id db8500_thermal_match[] = { >>> + { .compatible = "stericsson,db8500-thermal" }, >>> + {}, >>> +}; >>> +#else >>> +#define db8500_thermal_match NULL >>> +#endif >>> + >>> +static struct platform_driver db8500_thermal_driver = { >>> + .driver = { >>> + .owner = THIS_MODULE, >>> + .name = "db8500-thermal", >>> + .of_match_table = db8500_thermal_match, >>> + }, >>> + .probe = db8500_thermal_probe, >>> + .suspend = db8500_thermal_suspend, >>> + .resume = db8500_thermal_resume, >>> + .remove = db8500_thermal_remove, >>> +}; >>> + >>> +module_platform_driver(db8500_thermal_driver); >>> + >>> +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>"); >>> +MODULE_DESCRIPTION("DB8500 thermal driver"); MODULE_LICENSE("GPL"); >>> diff --git a/include/linux/platform_data/db8500_thermal.h >>> b/include/linux/platform_data/db8500_thermal.h >>> new file mode 100644 >>> index 0000000..3bf6090 >>> --- /dev/null >>> +++ b/include/linux/platform_data/db8500_thermal.h >>> @@ -0,0 +1,38 @@ >>> +/* >>> + * db8500_thermal.h - DB8500 Thermal Management Implementation >>> + * >>> + * Copyright (C) 2012 ST-Ericsson >>> + * Copyright (C) 2012 Linaro Ltd. >>> + * >>> + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> >>> + * >>> + * This program is free software; you can redistribute it and/or >>> modify >>> + * it under the terms of the GNU General Public License as published >>> by >>> + * the Free Software Foundation; either version 2 of the License, or >>> + * (at your option) any later version. >>> + * >>> + * This program is distributed in the hope that it will be useful, >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> + * GNU General Public License for more details. >>> + */ >>> + >>> +#ifndef _DB8500_THERMAL_H_ >>> +#define _DB8500_THERMAL_H_ >>> + >>> +#include <linux/thermal.h> >>> + >>> +#define COOLING_DEV_MAX 8 >>> + >>> +struct db8500_trip_point { >>> + unsigned long temp; >>> + enum thermal_trip_type type; >>> + char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH]; >>> +}; >>> + >>> +struct db8500_thsens_platform_data { >>> + struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS]; >>> + int num_trips; >>> +}; >>> + >>> +#endif /* _DB8500_THERMAL_H_ */ >>> -- >>> 1.7.11.3 >> -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/thermal/db8500-thermal.txt b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt new file mode 100644 index 0000000..cab6916 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt @@ -0,0 +1,40 @@ +* ST-Ericsson DB8500 Thermal + +** Thermal node properties: + +- compatible : "stericsson,db8500-thermal"; +- reg : address range of the thermal sensor registers; +- interrupts : interrupts generated from PRCMU; +- interrupt-names : "IRQ_HOTMON_LOW" and "IRQ_HOTMON_HIGH"; +- num-trips : number of total trip points; +- tripN-temp : temperature of trip point N, should be in ascending order; +- tripN-type : type of trip point N, should be one of "active" "passive" "hot" "critical"; +- tripN-cdev-num : number of the cooling devices which can be bound to trip point N; +- tripN-cdev-nameM : name of the No. M cooling device of trip point N; + +Usually the num-trips and tripN-*** are separated in board related dts files. + +Example: +thermal@801573c0 { + compatible = "stericsson,db8500-thermal"; + reg = <0x801573c0 0x40>; + interrupts = <21 0x4>, <22 0x4>; + interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; + + num-trips = <3>; + + trip0-temp = <70000>; + trip0-type = "active"; + trip0-cdev-num = <1>; + trip0-cdev-name0 = "thermal-cpufreq-0"; + + trip1-temp = <75000>; + trip1-type = "active"; + trip1-cdev-num = <2>; + trip1-cdev-name0 = "thermal-cpufreq-0"; + trip1-cdev-name1 = "thermal-fan"; + + trip2-temp = <85000>; + trip2-type = "critical"; + trip2-cdev-num = <0>; +} diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index e1cb6bd..54c8fd0 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -31,6 +31,26 @@ config CPU_THERMAL and not the ACPI interface. If you want this support, you should say Y here. +config DB8500_THERMAL + bool "DB8500 thermal management" + depends on THERMAL + default y + help + Adds DB8500 thermal management implementation according to the thermal + management framework. A thermal zone with several trip points will be + created. Cooling devices can be bound to the trip points to cool this + thermal zone if trip points reached. + +config DB8500_CPUFREQ_COOLING + tristate "DB8500 cpufreq cooling" + depends on CPU_THERMAL + default y + help + Adds DB8500 cpufreq cooling devices, and these cooling devices can be + bound to thermal zone trip points. When a trip point reached, the + bound cpufreq cooling device turns active to set CPU frequency low to + cool down the CPU. + config SPEAR_THERMAL bool "SPEAr thermal sensor driver" depends on THERMAL diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 885550d..c7a8dab 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -7,3 +7,5 @@ obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o +obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o +obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c new file mode 100644 index 0000000..4cf8e72 --- /dev/null +++ b/drivers/thermal/db8500_cpufreq_cooling.c @@ -0,0 +1,108 @@ +/* + * db8500_cpufreq_cooling.c - DB8500 cpufreq works as cooling device. + * + * Copyright (C) 2012 ST-Ericsson + * Copyright (C) 2012 Linaro Ltd. + * + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/cpu_cooling.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +static int db8500_cpufreq_cooling_probe(struct platform_device *pdev) +{ + struct thermal_cooling_device *cdev; + struct cpumask mask_val; + + /* make sure cpufreq driver has been initialized */ + if (!cpufreq_frequency_get_table(0)) + return -EPROBE_DEFER; + + cpumask_set_cpu(0, &mask_val); + cdev = cpufreq_cooling_register(&mask_val); + + if (IS_ERR_OR_NULL(cdev)) { + dev_err(&pdev->dev, "Failed to register cooling device\n"); + return PTR_ERR(cdev); + } + + platform_set_drvdata(pdev, cdev); + + dev_info(&pdev->dev, "Cooling device registered: %s\n", cdev->type); + + return 0; +} + +static int db8500_cpufreq_cooling_remove(struct platform_device *pdev) +{ + struct thermal_cooling_device *cdev = platform_get_drvdata(pdev); + + cpufreq_cooling_unregister(cdev); + + return 0; +} + +static int db8500_cpufreq_cooling_suspend(struct platform_device *pdev, + pm_message_t state) +{ + return -ENOSYS; +} + +static int db8500_cpufreq_cooling_resume(struct platform_device *pdev) +{ + return -ENOSYS; +} + +#ifdef CONFIG_OF +static const struct of_device_id db8500_cpufreq_cooling_match[] = { + { .compatible = "stericsson,db8500-cpufreq-cooling" }, + {}, +}; +#else +#define db8500_cpufreq_cooling_match NULL +#endif + +static struct platform_driver db8500_cpufreq_cooling_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "db8500-cpufreq-cooling", + .of_match_table = db8500_cpufreq_cooling_match, + }, + .probe = db8500_cpufreq_cooling_probe, + .suspend = db8500_cpufreq_cooling_suspend, + .resume = db8500_cpufreq_cooling_resume, + .remove = db8500_cpufreq_cooling_remove, +}; + +static int __init db8500_cpufreq_cooling_init(void) +{ + return platform_driver_register(&db8500_cpufreq_cooling_driver); +} + +static void __exit db8500_cpufreq_cooling_exit(void) +{ + platform_driver_unregister(&db8500_cpufreq_cooling_driver); +} + +/* Should be later than db8500_cpufreq_register */ +late_initcall(db8500_cpufreq_cooling_init); +module_exit(db8500_cpufreq_cooling_exit); + +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>"); +MODULE_DESCRIPTION("DB8500 cpufreq cooling driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c new file mode 100644 index 0000000..023f7b4 --- /dev/null +++ b/drivers/thermal/db8500_thermal.c @@ -0,0 +1,531 @@ +/* + * db8500_thermal.c - DB8500 Thermal Management Implementation + * + * Copyright (C) 2012 ST-Ericsson + * Copyright (C) 2012 Linaro Ltd. + * + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/cpu_cooling.h> +#include <linux/interrupt.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_data/db8500_thermal.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/thermal.h> + +#define PRCMU_DEFAULT_MEASURE_TIME 0xFFF +#define PRCMU_DEFAULT_LOW_TEMP 0 + +struct db8500_thermal_zone { + struct thermal_zone_device *therm_dev; + struct mutex th_lock; + struct work_struct therm_work; + struct db8500_thsens_platform_data *trip_tab; + enum thermal_device_mode mode; + enum thermal_trend trend; + unsigned long cur_temp_pseudo; + unsigned int cur_index; +}; + +/* Local function to check if thermal zone matches cooling devices */ +static int db8500_thermal_match_cdev(struct thermal_cooling_device *cdev, + struct db8500_trip_point *trip_points) +{ + int i; + char *cdev_name; + + if (!strlen(cdev->type)) + return -EINVAL; + + for (i = 0; i < COOLING_DEV_MAX; i++) { + cdev_name = trip_points->cdev_name[i]; + if (!strcmp(cdev_name, cdev->type)) + return 0; + } + + return -ENODEV; +} + +/* Callback to bind cooling device to thermal zone */ +static int db8500_cdev_bind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + unsigned long max_state, upper, lower; + int i, ret = -EINVAL; + + for (i = 0; i < ptrips->num_trips; i++) { + if (db8500_thermal_match_cdev(cdev, &ptrips->trip_points[i])) + continue; + + cdev->ops->get_max_state(cdev, &max_state); + lower = upper = (i > max_state) ? max_state : i; + + ret = thermal_zone_bind_cooling_device(thermal, i, cdev, + upper, lower); + + dev_info(&cdev->device, "%s bind to %d: %d-%s\n", + cdev->type, i, ret, ret ? "fail" : "succeed"); + } + + return ret; +} + +/* Callback to unbind cooling device from thermal zone */ +static int db8500_cdev_unbind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + int i, ret = -EINVAL; + + for (i = 0; i < ptrips->num_trips; i++) { + if (db8500_thermal_match_cdev(cdev, &ptrips->trip_points[i])) + continue; + + ret = thermal_zone_unbind_cooling_device(thermal, i, cdev); + + dev_info(&cdev->device, "%s unbind: %s\n", + cdev->type, ret ? "fail" : "succeed"); + } + + return ret; +} + +/* Callback to get current temperature */ +static int db8500_sys_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + + /* + * TODO: There is no PRCMU interface to get temperature data currently, + * so a pseudo temperature is returned , it works for thermal framework + * and this will be fixed when the PRCMU interface is available. + */ + *temp = pzone->cur_temp_pseudo; + + return 0; +} + +/* Callback to get temperature changing trend */ +static int db8500_sys_get_trend(struct thermal_zone_device *thermal, + int trip, enum thermal_trend *trend) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + + *trend = pzone->trend; + + return 0; +} + +/* Callback to get thermal zone mode */ +static int db8500_sys_get_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode *mode) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + + mutex_lock(&pzone->th_lock); + *mode = pzone->mode; + mutex_unlock(&pzone->th_lock); + + return 0; +} + +/* Callback to set thermal zone mode */ +static int db8500_sys_set_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode mode) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + + mutex_lock(&pzone->th_lock); + + pzone->mode = mode; + if (mode == THERMAL_DEVICE_ENABLED) + schedule_work(&pzone->therm_work); + + mutex_unlock(&pzone->th_lock); + + return 0; +} + +/* Callback to get trip point type */ +static int db8500_sys_get_trip_type(struct thermal_zone_device *thermal, + int trip, enum thermal_trip_type *type) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + + if (trip >= ptrips->num_trips) + return -EINVAL; + + *type = ptrips->trip_points[trip].type; + + return 0; +} + +/* Callback to get trip point temperature */ +static int db8500_sys_get_trip_temp(struct thermal_zone_device *thermal, + int trip, unsigned long *temp) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + + if (trip >= ptrips->num_trips) + return -EINVAL; + + *temp = ptrips->trip_points[trip].temp; + + return 0; +} + +/* Callback to get critical trip point temperature */ +static int db8500_sys_get_crit_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + int i; + + for (i = ptrips->num_trips - 1; i > 0; i--) { + if (ptrips->trip_points[i].type == THERMAL_TRIP_CRITICAL) { + *temp = ptrips->trip_points[i].temp; + return 0; + } + } + + return -EINVAL; +} + +static struct thermal_zone_device_ops thdev_ops = { + .bind = db8500_cdev_bind, + .unbind = db8500_cdev_unbind, + .get_temp = db8500_sys_get_temp, + .get_trend = db8500_sys_get_trend, + .get_mode = db8500_sys_get_mode, + .set_mode = db8500_sys_set_mode, + .get_trip_type = db8500_sys_get_trip_type, + .get_trip_temp = db8500_sys_get_trip_temp, + .get_crit_temp = db8500_sys_get_crit_temp, +}; + +static void db8500_thermal_update_config(struct db8500_thermal_zone *pzone, + unsigned int idx, enum thermal_trend trend, + unsigned long next_low, unsigned long next_high) +{ + pzone->cur_index = idx; + pzone->cur_temp_pseudo = (next_low + next_high)/2; + pzone->trend = trend; + + prcmu_stop_temp_sense(); + prcmu_config_hotmon((u8)(next_low/1000), (u8)(next_high/1000)); + prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME); +} + +static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data) +{ + struct db8500_thermal_zone *pzone = irq_data; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + unsigned int idx = pzone->cur_index; + unsigned long next_low, next_high; + + if (unlikely(idx == 0)) + /* Meaningless for thermal management, ignoring it */ + return IRQ_HANDLED; + + if (idx == 1) { + next_high = ptrips->trip_points[0].temp; + next_low = PRCMU_DEFAULT_LOW_TEMP; + } else { + next_high = ptrips->trip_points[idx-1].temp; + next_low = ptrips->trip_points[idx-2].temp; + } + idx -= 1; + + db8500_thermal_update_config(pzone, idx, THERMAL_TREND_DROPPING, + next_low, next_high); + + dev_dbg(&pzone->therm_dev->device, + "PRCMU set max %ld, min %ld\n", next_high, next_low); + + schedule_work(&pzone->therm_work); + + return IRQ_HANDLED; +} + +static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data) +{ + struct db8500_thermal_zone *pzone = irq_data; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + unsigned int idx = pzone->cur_index; + unsigned long next_low, next_high; + + if (idx < ptrips->num_trips - 1) { + next_high = ptrips->trip_points[idx+1].temp; + next_low = ptrips->trip_points[idx].temp; + idx += 1; + + db8500_thermal_update_config(pzone, idx, THERMAL_TREND_RAISING, + next_low, next_high); + + dev_dbg(&pzone->therm_dev->device, + "PRCMU set max %ld, min %ld\n", next_high, next_low); + } else if (idx == ptrips->num_trips - 1) + pzone->cur_temp_pseudo = ptrips->trip_points[idx].temp + 1; + + schedule_work(&pzone->therm_work); + + return IRQ_HANDLED; +} + +static void db8500_thermal_work(struct work_struct *work) +{ + enum thermal_device_mode cur_mode; + struct db8500_thermal_zone *pzone; + + pzone = container_of(work, struct db8500_thermal_zone, therm_work); + + mutex_lock(&pzone->th_lock); + cur_mode = pzone->mode; + mutex_unlock(&pzone->th_lock); + + if (cur_mode == THERMAL_DEVICE_DISABLED) + return; + + thermal_zone_device_update(pzone->therm_dev); + dev_dbg(&pzone->therm_dev->device, "thermal work finished.\n"); +} + +#ifdef CONFIG_OF +static struct db8500_thsens_platform_data* + db8500_thermal_parse_dt(struct platform_device *pdev) +{ + struct db8500_thsens_platform_data *ptrips; + struct device_node *np = pdev->dev.of_node; + char prop_name[32]; + const char *tmp_str; + u32 tmp_data; + int i, j; + + ptrips = devm_kzalloc(&pdev->dev, sizeof(*ptrips), GFP_KERNEL); + if (!ptrips) + return NULL; + + if (of_property_read_u32(np, "num-trips", &tmp_data)) + goto err_parse_dt; + + if (tmp_data > THERMAL_MAX_TRIPS) + goto err_parse_dt; + + ptrips->num_trips = tmp_data; + + for (i = 0; i < ptrips->num_trips; i++) { + sprintf(prop_name, "trip%d-temp", i); + if (of_property_read_u32(np, prop_name, &tmp_data)) + goto err_parse_dt; + + ptrips->trip_points[i].temp = tmp_data; + + sprintf(prop_name, "trip%d-type", i); + if (of_property_read_string(np, prop_name, &tmp_str)) + goto err_parse_dt; + + if (!strcmp(tmp_str, "active")) + ptrips->trip_points[i].type = THERMAL_TRIP_ACTIVE; + else if (!strcmp(tmp_str, "passive")) + ptrips->trip_points[i].type = THERMAL_TRIP_PASSIVE; + else if (!strcmp(tmp_str, "hot")) + ptrips->trip_points[i].type = THERMAL_TRIP_HOT; + else if (!strcmp(tmp_str, "critical")) + ptrips->trip_points[i].type = THERMAL_TRIP_CRITICAL; + else + goto err_parse_dt; + + sprintf(prop_name, "trip%d-cdev-num", i); + if (of_property_read_u32(np, prop_name, &tmp_data)) + goto err_parse_dt; + + if (tmp_data > COOLING_DEV_MAX) + goto err_parse_dt; + + for (j = 0; j < tmp_data; j++) { + sprintf(prop_name, "trip%d-cdev-name%d", i, j); + if (of_property_read_string(np, prop_name, &tmp_str)) + goto err_parse_dt; + + if (strlen(tmp_str) > THERMAL_NAME_LENGTH) + goto err_parse_dt; + + strcpy(ptrips->trip_points[i].cdev_name[j], tmp_str); + } + } + return ptrips; + +err_parse_dt: + dev_err(&pdev->dev, "Parsing device tree data error.\n"); + return NULL; +} +#else +static inline struct db8500_thsens_platform_data* + db8500_thermal_parse_dt(struct platform_device *pdev) +{ + return NULL; +} +#endif + +static int db8500_thermal_probe(struct platform_device *pdev) +{ + struct db8500_thermal_zone *pzone = NULL; + struct db8500_thsens_platform_data *ptrips = NULL; + struct device_node *np = pdev->dev.of_node; + int low_irq, high_irq, ret = 0; + unsigned long dft_low, dft_high; + + if (np) + ptrips = db8500_thermal_parse_dt(pdev); + else + ptrips = dev_get_platdata(&pdev->dev); + + if (!ptrips) + return -EINVAL; + + pzone = devm_kzalloc(&pdev->dev, sizeof(*pzone), GFP_KERNEL); + if (!pzone) + return -ENOMEM; + + mutex_init(&pzone->th_lock); + mutex_lock(&pzone->th_lock); + + pzone->mode = THERMAL_DEVICE_DISABLED; + pzone->trip_tab = ptrips; + + dft_low = PRCMU_DEFAULT_LOW_TEMP; + dft_high = ptrips->trip_points[0].temp; + + db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE, + dft_low, dft_high); + + INIT_WORK(&pzone->therm_work, db8500_thermal_work); + + low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW"); + if (low_irq < 0) { + dev_err(&pdev->dev, "Get IRQ_HOTMON_LOW failed.\n"); + return low_irq; + } + + ret = devm_request_threaded_irq(&pdev->dev, low_irq, NULL, + prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, + "dbx500_temp_low", pzone); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to allocate temp low irq.\n"); + return ret; + } + + high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH"); + if (high_irq < 0) { + dev_err(&pdev->dev, "Get IRQ_HOTMON_HIGH failed.\n"); + return high_irq; + } + + ret = devm_request_threaded_irq(&pdev->dev, high_irq, NULL, + prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, + "dbx500_temp_high", pzone); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to allocate temp high irq.\n"); + return ret; + } + + pzone->therm_dev = thermal_zone_device_register("db8500_thermal_zone", + ptrips->num_trips, 0, pzone, &thdev_ops, 0, 0); + + if (IS_ERR_OR_NULL(pzone->therm_dev)) { + dev_err(&pdev->dev, "Register thermal zone device failed.\n"); + return PTR_ERR(pzone->therm_dev); + } + dev_info(&pdev->dev, "Thermal zone device registered.\n"); + + platform_set_drvdata(pdev, pzone); + pzone->mode = THERMAL_DEVICE_ENABLED; + mutex_unlock(&pzone->th_lock); + + return 0; +} + +static int db8500_thermal_remove(struct platform_device *pdev) +{ + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); + + thermal_zone_device_unregister(pzone->therm_dev); + cancel_work_sync(&pzone->therm_work); + mutex_destroy(&pzone->th_lock); + + return 0; +} + +static int db8500_thermal_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); + + flush_work_sync(&pzone->therm_work); + prcmu_stop_temp_sense(); + + return 0; +} + +static int db8500_thermal_resume(struct platform_device *pdev) +{ + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + unsigned long dft_low, dft_high; + + dft_low = PRCMU_DEFAULT_LOW_TEMP; + dft_high = ptrips->trip_points[0].temp; + + db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE, + dft_low, dft_high); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id db8500_thermal_match[] = { + { .compatible = "stericsson,db8500-thermal" }, + {}, +}; +#else +#define db8500_thermal_match NULL +#endif + +static struct platform_driver db8500_thermal_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "db8500-thermal", + .of_match_table = db8500_thermal_match, + }, + .probe = db8500_thermal_probe, + .suspend = db8500_thermal_suspend, + .resume = db8500_thermal_resume, + .remove = db8500_thermal_remove, +}; + +module_platform_driver(db8500_thermal_driver); + +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>"); +MODULE_DESCRIPTION("DB8500 thermal driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/db8500_thermal.h b/include/linux/platform_data/db8500_thermal.h new file mode 100644 index 0000000..3bf6090 --- /dev/null +++ b/include/linux/platform_data/db8500_thermal.h @@ -0,0 +1,38 @@ +/* + * db8500_thermal.h - DB8500 Thermal Management Implementation + * + * Copyright (C) 2012 ST-Ericsson + * Copyright (C) 2012 Linaro Ltd. + * + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DB8500_THERMAL_H_ +#define _DB8500_THERMAL_H_ + +#include <linux/thermal.h> + +#define COOLING_DEV_MAX 8 + +struct db8500_trip_point { + unsigned long temp; + enum thermal_trip_type type; + char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH]; +}; + +struct db8500_thsens_platform_data { + struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS]; + int num_trips; +}; + +#endif /* _DB8500_THERMAL_H_ */