diff mbox

[ACPIHP,part1,2/4] ACPIHP: introduce acpihp_slot driver to enumerate hotplug slots

Message ID 1351958865-24394-3-git-send-email-jiang.liu@huawei.com (mailing list archive)
State Changes Requested, archived
Headers show

Commit Message

Jiang Liu Nov. 3, 2012, 4:07 p.m. UTC
An ACPI hotplug slot is an abstraction of receptacles, where a group of
system devices could be connected to. This patch implements the skeleton
of the ACPI system device hotplug slot enumerator. On loading, it scans
the whole ACPI namespace for hotplug slots and creates a device node for
each hotplug slot found. Every hotplug slot is associated with a device
class named acpihp_slot_class. Later hotplug drivers will register onto
acpihp_slot_class to manage all hotplug slots.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Gaohuai Han <hangaohuai@huawei.com>
---
 drivers/acpi/Kconfig          |   19 ++
 drivers/acpi/hotplug/Makefile |    3 +
 drivers/acpi/hotplug/slot.c   |  417 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 439 insertions(+)
 create mode 100644 drivers/acpi/hotplug/slot.c

Comments

Bjorn Helgaas Nov. 5, 2012, 9:30 p.m. UTC | #1
On Sat, Nov 3, 2012 at 10:07 AM, Jiang Liu <liuj97@gmail.com> wrote:
> An ACPI hotplug slot is an abstraction of receptacles, where a group of
> system devices could be connected to. This patch implements the skeleton
> of the ACPI system device hotplug slot enumerator. On loading, it scans
> the whole ACPI namespace for hotplug slots and creates a device node for
> each hotplug slot found. Every hotplug slot is associated with a device
> class named acpihp_slot_class. Later hotplug drivers will register onto
> acpihp_slot_class to manage all hotplug slots.
>
> Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
> Signed-off-by: Gaohuai Han <hangaohuai@huawei.com>
> ---
>  drivers/acpi/Kconfig          |   19 ++
>  drivers/acpi/hotplug/Makefile |    3 +
>  drivers/acpi/hotplug/slot.c   |  417 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 439 insertions(+)
>  create mode 100644 drivers/acpi/hotplug/slot.c
>
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 9577b23..af0aaf6 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -334,6 +334,25 @@ menuconfig ACPI_HOTPLUG
>           If your hardware platform does not support system device dynamic
>           reconfiguration at runtime, you need not to enable this option.
>
> +config ACPI_HOTPLUG_SLOT
> +       tristate "System Device Hotplug Slot Enumerator"

I don't really believe in hotplug drivers being modules.  I think the
core should support hotplug directly, and the decision to configure or
not should be made at build-time.

> +       depends on ACPI_HOTPLUG
> +       default m
> +       help
> +         ACPI system device hotplug slot is an abstraction of ACPI based
> +         system device dynamic reconfiguration control points. On load,
> +         this driver enumerates system device hotplug slots by wakling the
> +         ACPI namespace and provides platform specific methods to control
> +         those hotplug slots.
> +
> +         By default, this driver detects system device hotplug slots by
> +         checking avaliability of ACPI _EJ0 method. You may pass a module
> +         parameter "fake_slot=0xf" to enable faking hotplug slots on
> +         platforms without hardware dynamic reconfiguration capabilities.
> +
> +         To compile this driver as a module, choose M here:
> +         the module will be called acpihp_slot.
> +

> +static int __init acpihp_slot_generate_name(struct acpihp_slot *slot)
> +{
> +       int found = 0;
> +       u32 child_types = 0;
> +       unsigned long long uid;
> +       struct acpihp_slot_id *slot_id;
> +
> +       /*
> +        * Figure out slot type by checking types of ACPI devices which could
> +        * be attached to the slot.
> +        */
> +       slot->type = acpihp_slot_get_type_self(slot);
> +       if (slot->type == ACPIHP_SLOT_TYPE_UNKNOWN) {
> +               acpi_walk_namespace(ACPI_TYPE_DEVICE, slot->handle,
> +                               ACPI_UINT32_MAX, acpihp_slot_get_dev_type,
> +                               NULL, NULL, (void **)&child_types);
> +               acpi_walk_namespace(ACPI_TYPE_PROCESSOR, slot->handle,
> +                               ACPI_UINT32_MAX, acpihp_slot_get_dev_type,
> +                               NULL, NULL, (void **)&child_types);
> +               slot->type = acpihp_slot_get_type_child(child_types);
> +       }

If things can be hot-added below slot->handle, is there an ACPI
requirement that there be *anything* in the existing namespace below
slot->handle?  I'm not sure you can tell sort of things might be
added.

> +static int __init acpihp_slot_scan_slots(void)
> +{
> +       acpi_status status;
> +
> +       status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
> +                                    ACPI_UINT32_MAX, acpihp_slot_scan,
> +                                    NULL, NULL, NULL);
> +       if (!ACPI_SUCCESS(status))
> +               goto out_err;
> +
> +       status = acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
> +                                    ACPI_UINT32_MAX, acpihp_slot_scan,
> +                                    NULL, NULL, NULL);

Here's one reason I don't like this as a module: we have to walk the
namespace again (twice, even).  What happens when you hot-add a node
that itself *contains* another hot-pluggable receptacle?  Do you walk
the namespace again, calling acpiphp_slot_scan() as needed?
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jiang Liu Nov. 6, 2012, 4:28 p.m. UTC | #2
On 11/06/2012 05:30 AM, Bjorn Helgaas wrote:
> On Sat, Nov 3, 2012 at 10:07 AM, Jiang Liu <liuj97@gmail.com> wrote:
>> An ACPI hotplug slot is an abstraction of receptacles, where a group of
>> system devices could be connected to. This patch implements the skeleton
>> of the ACPI system device hotplug slot enumerator. On loading, it scans
>> the whole ACPI namespace for hotplug slots and creates a device node for
>> each hotplug slot found. Every hotplug slot is associated with a device
>> class named acpihp_slot_class. Later hotplug drivers will register onto
>> acpihp_slot_class to manage all hotplug slots.
>>
>> Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
>> Signed-off-by: Gaohuai Han <hangaohuai@huawei.com>
>> ---
>>  drivers/acpi/Kconfig          |   19 ++
>>  drivers/acpi/hotplug/Makefile |    3 +
>>  drivers/acpi/hotplug/slot.c   |  417 +++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 439 insertions(+)
>>  create mode 100644 drivers/acpi/hotplug/slot.c
>>
>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
>> index 9577b23..af0aaf6 100644
>> --- a/drivers/acpi/Kconfig
>> +++ b/drivers/acpi/Kconfig
>> @@ -334,6 +334,25 @@ menuconfig ACPI_HOTPLUG
>>           If your hardware platform does not support system device dynamic
>>           reconfiguration at runtime, you need not to enable this option.
>>
>> +config ACPI_HOTPLUG_SLOT
>> +       tristate "System Device Hotplug Slot Enumerator"
> 
> I don't really believe in hotplug drivers being modules.  I think the
> core should support hotplug directly, and the decision to configure or
> not should be made at build-time.
Good suggestion, I will change it in next version.

>> +       depends on ACPI_HOTPLUG
>> +       default m
>> +       help
>> +         ACPI system device hotplug slot is an abstraction of ACPI based
>> +         system device dynamic reconfiguration control points. On load,
>> +         this driver enumerates system device hotplug slots by wakling the
>> +         ACPI namespace and provides platform specific methods to control
>> +         those hotplug slots.
>> +
>> +         By default, this driver detects system device hotplug slots by
>> +         checking avaliability of ACPI _EJ0 method. You may pass a module
>> +         parameter "fake_slot=0xf" to enable faking hotplug slots on
>> +         platforms without hardware dynamic reconfiguration capabilities.
>> +
>> +         To compile this driver as a module, choose M here:
>> +         the module will be called acpihp_slot.
>> +
> 
>> +static int __init acpihp_slot_generate_name(struct acpihp_slot *slot)
>> +{
>> +       int found = 0;
>> +       u32 child_types = 0;
>> +       unsigned long long uid;
>> +       struct acpihp_slot_id *slot_id;
>> +
>> +       /*
>> +        * Figure out slot type by checking types of ACPI devices which could
>> +        * be attached to the slot.
>> +        */
>> +       slot->type = acpihp_slot_get_type_self(slot);
>> +       if (slot->type == ACPIHP_SLOT_TYPE_UNKNOWN) {
>> +               acpi_walk_namespace(ACPI_TYPE_DEVICE, slot->handle,
>> +                               ACPI_UINT32_MAX, acpihp_slot_get_dev_type,
>> +                               NULL, NULL, (void **)&child_types);
>> +               acpi_walk_namespace(ACPI_TYPE_PROCESSOR, slot->handle,
>> +                               ACPI_UINT32_MAX, acpihp_slot_get_dev_type,
>> +                               NULL, NULL, (void **)&child_types);
>> +               slot->type = acpihp_slot_get_type_child(child_types);
>> +       }
> 
> If things can be hot-added below slot->handle, is there an ACPI
> requirement that there be *anything* in the existing namespace below
> slot->handle?  I'm not sure you can tell sort of things might be
> added.
To be compatible with old Windows, some BIOS will expose such a behavior.
It put the PCI root bus built in a physical processor directly under /_SB
instead of the module device for the processor. According to my observation,
new BIOSes have changed that behavior and build ACPI namespace according to
physical topology. 

>> +static int __init acpihp_slot_scan_slots(void)
>> +{
>> +       acpi_status status;
>> +
>> +       status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
>> +                                    ACPI_UINT32_MAX, acpihp_slot_scan,
>> +                                    NULL, NULL, NULL);
>> +       if (!ACPI_SUCCESS(status))
>> +               goto out_err;
>> +
>> +       status = acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
>> +                                    ACPI_UINT32_MAX, acpihp_slot_scan,
>> +                                    NULL, NULL, NULL);
> 
> Here's one reason I don't like this as a module: we have to walk the
> namespace again (twice, even).  What happens when you hot-add a node
> that itself *contains* another hot-pluggable receptacle?  Do you walk
> the namespace again, calling acpiphp_slot_scan() as needed?
Loading of dynamic ACPI table is an issue, it should be handled. But we have
left that on the TODO list for simplicity at first stage. When supporting 
that in future, we just need to scan the subtree starting from the slot.

Thanks
Gerry
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 9577b23..af0aaf6 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -334,6 +334,25 @@  menuconfig ACPI_HOTPLUG
 	  If your hardware platform does not support system device dynamic
 	  reconfiguration at runtime, you need not to enable this option.
 
+config ACPI_HOTPLUG_SLOT
+	tristate "System Device Hotplug Slot Enumerator"
+	depends on ACPI_HOTPLUG
+	default m
+	help
+	  ACPI system device hotplug slot is an abstraction of ACPI based
+	  system device dynamic reconfiguration control points. On load,
+	  this driver enumerates system device hotplug slots by wakling the
+	  ACPI namespace and provides platform specific methods to control
+	  those hotplug slots.
+
+	  By default, this driver detects system device hotplug slots by
+	  checking avaliability of ACPI _EJ0 method. You may pass a module
+	  parameter "fake_slot=0xf" to enable faking hotplug slots on
+	  platforms without hardware dynamic reconfiguration capabilities.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called acpihp_slot.
+
 config ACPI_CONTAINER
 	tristate "Container and Module Devices (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
diff --git a/drivers/acpi/hotplug/Makefile b/drivers/acpi/hotplug/Makefile
index 5e7790f..2cbb03c 100644
--- a/drivers/acpi/hotplug/Makefile
+++ b/drivers/acpi/hotplug/Makefile
@@ -4,3 +4,6 @@ 
 
 obj-$(CONFIG_ACPI_HOTPLUG)			+= acpihp.o
 acpihp-y					= core.o
+
+obj-$(CONFIG_ACPI_HOTPLUG_SLOT)			+= acpihp_slot.o
+acpihp_slot-y					= slot.o
diff --git a/drivers/acpi/hotplug/slot.c b/drivers/acpi/hotplug/slot.c
new file mode 100644
index 0000000..b76cb16
--- /dev/null
+++ b/drivers/acpi/hotplug/slot.c
@@ -0,0 +1,417 @@ 
+/*
+ * Copyright (C) 2012 Huawei Tech. Co., Ltd.
+ * Copyright (C) 2012 Jiang Liu <jiang.liu@huawei.com>
+ * Copyright (C) 2012 Gaohuai Han <hangaohuai@huawei.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include "acpihp.h"
+
+struct acpihp_slot_id {
+	struct list_head node;
+	enum acpihp_slot_type type;
+	unsigned long instance_id;
+};
+
+static LIST_HEAD(slot_list);
+static LIST_HEAD(slot_id_list);
+static struct acpihp_slot_ops *slot_ops_curr;
+
+/*
+ * Platform dependent slot drivers should be sorted in descending order.
+ * The first entry whose init() method returns success will be used.
+ */
+static struct acpihp_slot_ops *slot_ops_array[] = {
+	NULL
+};
+
+static acpi_status __init
+acpihp_slot_get_dev_type(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	u32 *tp = (u32 *)rv;
+	acpi_status status = AE_OK;
+	enum acpihp_dev_type type;
+
+	/* Only care about CPU, memory, PCI host bridge and CONTAINER */
+	if (!acpihp_dev_get_type(handle, &type)) {
+		switch (type) {
+		case ACPIHP_DEV_TYPE_CPU:
+			*tp |= 0x0001;
+			status = AE_CTRL_DEPTH;
+			break;
+		case ACPIHP_DEV_TYPE_MEM:
+			*tp |= 0x0002;
+			status = AE_CTRL_DEPTH;
+			break;
+		case ACPIHP_DEV_TYPE_HOST_BRIDGE:
+			*tp |= 0x0004;
+			status = AE_CTRL_DEPTH;
+			break;
+		case ACPIHP_DEV_TYPE_CONTAINER:
+			*tp |= 0x0008;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return status;
+}
+
+static enum acpihp_slot_type __init acpihp_slot_get_type_child(u32 dev_types)
+{
+	BUG_ON(dev_types > 15);
+
+	switch (dev_types) {
+	case 0:
+		/* Generic CONTAINER */
+		return ACPIHP_SLOT_TYPE_COMMON;
+	case 1:
+		/* Physical processor with logical CPUs */
+		return ACPIHP_SLOT_TYPE_CPU;
+	case 2:
+		/* Memory board/box with memory devices */
+		return ACPIHP_SLOT_TYPE_MEM;
+	case 3:
+		/* Physical processor with CPUs and memory controllers */
+		return ACPIHP_SLOT_TYPE_CPU;
+	case 4:
+		/* IO eXtension board/box with IO host bridges */
+		return ACPIHP_SLOT_TYPE_IOX;
+	case 7:
+		/* Physical processor with CPUs, IO host bridges and MCs. */
+		return ACPIHP_SLOT_TYPE_CPU;
+	case 8:
+		/* Generic CONTAINER */
+		return ACPIHP_SLOT_TYPE_COMMON;
+	case 9:
+		/* System board with physical processors */
+		return ACPIHP_SLOT_TYPE_SYSTEM_BOARD;
+	case 11:
+		/* System board with physical processors and memory */
+		return ACPIHP_SLOT_TYPE_SYSTEM_BOARD;
+	case 15:
+		/* Node with processor, memory and IO host bridge */
+		return ACPIHP_SLOT_TYPE_NODE;
+	default:
+		return ACPIHP_SLOT_TYPE_UNKNOWN;
+	}
+}
+
+static enum acpihp_slot_type __init
+acpihp_slot_get_type_self(struct acpihp_slot *slot)
+{
+	enum acpihp_dev_type type;
+
+	if (acpihp_dev_get_type(slot->handle, &type))
+		return ACPIHP_SLOT_TYPE_UNKNOWN;
+
+	switch (type) {
+	case ACPIHP_DEV_TYPE_CPU:
+		/* Logical CPU used in virtualization environment */
+		return ACPIHP_SLOT_TYPE_CPU;
+	case ACPIHP_DEV_TYPE_MEM:
+		/* Memory board with single memory device */
+		return ACPIHP_SLOT_TYPE_MEM;
+	case ACPIHP_DEV_TYPE_HOST_BRIDGE:
+		/* IO eXtension board/box with single IO host bridge */
+		return ACPIHP_SLOT_TYPE_IOX;
+	default:
+		return ACPIHP_SLOT_TYPE_UNKNOWN;
+	}
+}
+
+/*
+ * Generate a meaningful name for a hotplug slot according to types of ACPI
+ * devices which could be attached to the slot.
+ */
+static int __init acpihp_slot_generate_name(struct acpihp_slot *slot)
+{
+	int found = 0;
+	u32 child_types = 0;
+	unsigned long long uid;
+	struct acpihp_slot_id *slot_id;
+
+	/*
+	 * Figure out slot type by checking types of ACPI devices which could
+	 * be attached to the slot.
+	 */
+	slot->type = acpihp_slot_get_type_self(slot);
+	if (slot->type == ACPIHP_SLOT_TYPE_UNKNOWN) {
+		acpi_walk_namespace(ACPI_TYPE_DEVICE, slot->handle,
+				ACPI_UINT32_MAX, acpihp_slot_get_dev_type,
+				NULL, NULL, (void **)&child_types);
+		acpi_walk_namespace(ACPI_TYPE_PROCESSOR, slot->handle,
+				ACPI_UINT32_MAX, acpihp_slot_get_dev_type,
+				NULL, NULL, (void **)&child_types);
+		slot->type = acpihp_slot_get_type_child(child_types);
+	}
+
+	/* Respect firmware settings if ACPI _UID returns a valid value. */
+	if (ACPI_SUCCESS(acpi_evaluate_integer(slot->handle, METHOD_NAME__UID,
+					       NULL, &uid)))
+		goto set_name;
+
+	/* Generate a unique pseudo instance ID */
+	list_for_each_entry(slot_id, &slot_id_list, node)
+		if (slot_id->type == slot->type) {
+			found = 1;
+			break;
+		}
+	if (!found) {
+		slot_id = kzalloc(sizeof(struct acpihp_slot_id), GFP_KERNEL);
+		if (!slot_id) {
+			ACPIHP_SLOT_WARN(slot,
+				"fails to allocate slot instance ID.\n");
+			return -ENOMEM;
+		}
+		slot_id->type = slot->type;
+		list_add_tail(&slot_id->node, &slot_id_list);
+	}
+	uid = slot_id->instance_id++;
+
+set_name:
+	snprintf(slot->name, sizeof(slot->name) - 1, "%s%02llx",
+		 acpihp_get_slot_type_name(slot->type), uid);
+	dev_set_name(&slot->dev, "%s", slot->name);
+
+	return 0;
+}
+
+static int __init acpihp_slot_get_parent(struct acpihp_slot *slot)
+{
+	acpi_handle handle, root_handle;
+	struct acpihp_slot *tmp;
+
+	slot->parent = NULL;
+	handle = slot->handle;
+	if (ACPI_FAILURE(acpi_get_handle(NULL, ACPI_NS_ROOT_PATH,
+					 &root_handle))) {
+		ACPIHP_SLOT_DEBUG(slot, "fails to get ACPI root device.\n");
+		return -ENODEV;
+	}
+
+	do {
+		if (ACPI_FAILURE(acpi_get_parent(handle, &handle))) {
+			ACPIHP_SLOT_DEBUG(slot,
+					  "fails to get parent device.\n");
+			return -ENODEV;
+		}
+		list_for_each_entry(tmp, &slot_list, slot_list)
+			if (tmp->handle == handle) {
+				slot->parent = tmp;
+				return 0;
+			}
+	} while (handle != root_handle);
+
+	return 0;
+}
+
+static int __init acpihp_slot_get_state(struct acpihp_slot *slot)
+{
+	unsigned long long sta;
+
+	/* Hotplug slots must implement ACPI _STA method. */
+	if (ACPI_FAILURE(acpihp_slot_get_status(slot, &sta))) {
+		ACPIHP_SLOT_DEBUG(slot, "fails to execute _STA method.\n");
+		return -EINVAL;
+	}
+
+	if (!(sta & ACPI_STA_DEVICE_PRESENT))
+		slot->state = ACPIHP_SLOT_STATE_ABSENT;
+	else if ((sta & ACPI_STA_DEVICE_ENABLED) ||
+		 (sta & ACPI_STA_DEVICE_FUNCTIONING))
+		slot->state = ACPIHP_SLOT_STATE_POWERED;
+	else
+		slot->state = ACPIHP_SLOT_STATE_PRESENT;
+
+	return 0;
+}
+
+static int __init acpihp_slot_create(acpi_handle handle)
+{
+	struct acpihp_slot *slot;
+
+	slot = acpihp_alloc_slot(handle, NULL);
+	if (!slot) {
+		ACPIHP_DEBUG("fails to allocate memory for slot %p.\n", handle);
+		return -ENOMEM;
+	}
+
+	slot->slot_ops = slot_ops_curr;
+	if (ACPI_FAILURE(slot_ops_curr->create(slot))) {
+		ACPIHP_DEBUG("fails to create slot for %p.\n", handle);
+		goto out_free;
+	}
+	if (acpihp_slot_get_parent(slot))
+		goto out_destroy;
+	if (acpihp_slot_get_state(slot))
+		goto out_destroy;
+	if (acpihp_slot_generate_name(slot))
+		goto out_destroy;
+
+	if (acpihp_register_slot(slot)) {
+		ACPIHP_SLOT_DEBUG(slot, "fails to register slot.\n");
+		goto out_destroy;
+	}
+	if (ACPI_FAILURE(acpihp_mark_slot(handle, slot))) {
+		ACPIHP_SLOT_DEBUG(slot,
+			"fails to attach slot to ACPI device object.\n");
+		goto out_unregister;
+	}
+
+	list_add_tail(&slot->slot_list, &slot_list);
+
+	return 0;
+
+out_unregister:
+	acpihp_unregister_slot(slot);
+out_destroy:
+	if (slot_ops_curr->destroy)
+		slot_ops_curr->destroy(slot);
+out_free:
+	acpihp_slot_put(slot);
+	return -ENODEV;
+}
+
+static acpi_status __init acpihp_slot_scan(acpi_handle handle, u32 lvl,
+					   void *context, void **rv)
+{
+	enum acpihp_dev_type type;
+
+	if (acpihp_dev_get_type(handle, &type) ||
+	    type == ACPIHP_DEV_TYPE_UNKNOWN)
+		return AE_OK;
+
+	if (ACPI_SUCCESS(slot_ops_curr->check(handle)))
+		acpihp_slot_create(handle);
+
+	/*
+	 * Don't scan hotplug slots under PCI host bridges, they should be
+	 * handled by acpiphp or pciehp drivers.
+	 */
+	if (type == ACPIHP_DEV_TYPE_HOST_BRIDGE)
+		return AE_CTRL_DEPTH;
+
+	return AE_OK;
+}
+
+static int __init acpihp_slot_scan_slots(void)
+{
+	acpi_status status;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+				     ACPI_UINT32_MAX, acpihp_slot_scan,
+				     NULL, NULL, NULL);
+	if (!ACPI_SUCCESS(status))
+		goto out_err;
+
+	status = acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
+				     ACPI_UINT32_MAX, acpihp_slot_scan,
+				     NULL, NULL, NULL);
+	if (ACPI_SUCCESS(status))
+		return 0;
+
+out_err:
+	ACPIHP_DEBUG("fails to scan ACPI hotplug slots.\n");
+
+	return -ENODEV;
+}
+
+static void acpihp_slot_cleanup(void)
+{
+	struct acpihp_slot *slot, *tmp;
+	struct acpihp_slot_id *slot_id, *tmp_id;
+
+	list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) {
+		acpihp_unmark_slot(slot->handle);
+		acpihp_unregister_slot(slot);
+		if (slot->slot_ops && slot->slot_ops->destroy)
+			slot->slot_ops->destroy(slot);
+		acpihp_slot_put(slot);
+	}
+
+	list_for_each_entry_safe(slot_id, tmp_id, &slot_id_list, node) {
+		list_del(&slot_id->node);
+		kfree(slot_id);
+	}
+}
+
+static int __init acpihp_slot_init(void)
+{
+	int i, retval;
+
+	/* probe for available platform specific slot driver. */
+	for (i = 0; slot_ops_array[i]; i++)
+		if (ACPI_SUCCESS(slot_ops_array[i]->init())) {
+			slot_ops_curr = slot_ops_array[i];
+			break;
+		}
+	if (slot_ops_curr == NULL) {
+		ACPIHP_DEBUG("no platform specific slot driver available.\n");
+		return -ENODEV;
+	}
+
+	retval = acpihp_core_init();
+	if (retval != 0) {
+		ACPIHP_DEBUG("fails to initialize ACPIHP core.\n");
+		goto out_fini;
+	}
+
+	if (acpihp_slot_scan_slots() != 0)
+		ACPIHP_DEBUG("fails to enumerate ACPI hotplug slots.\n");
+
+	/* Back out if no ACPI hotplug slot found. */
+	if (list_empty(&slot_list)) {
+		ACPIHP_DEBUG("no ACPI hotplug slot available.\n");
+		retval = -ENODEV;
+		goto out_core_fini;
+	}
+
+	return 0;
+
+out_core_fini:
+	acpihp_core_fini();
+out_fini:
+	if (slot_ops_curr && slot_ops_curr->fini)
+		slot_ops_curr->fini();
+	ACPIHP_DEBUG("fails to initialize ACPI hotplug slot driver.\n");
+
+	return retval;
+}
+
+static void __exit acpihp_slot_exit(void)
+{
+	acpihp_slot_cleanup();
+	acpihp_core_fini();
+	if (slot_ops_curr && slot_ops_curr->fini)
+		slot_ops_curr->fini();
+}
+
+module_init(acpihp_slot_init);
+module_exit(acpihp_slot_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jiang Liu <jiang.liu@huawei.com>");
+MODULE_AUTHOR("Gaohuai Han <hangaohuai@huawei.com>");