diff mbox

[v2,03/14] ARM: OMAP5: id: Add cpu id for ES versions

Message ID 1341566515-22665-4-git-send-email-santosh.shilimkar@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Santosh Shilimkar July 6, 2012, 9:21 a.m. UTC 
From: R Sricharan <r.sricharan@ti.com>

Adding the OMAP5 ES1.0, 2.0 and OMAP5432 cpu revision
detection support.

Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
 arch/arm/mach-omap2/control.h         |    4 ++++
 arch/arm/mach-omap2/id.c              |   42 ++++++++++++++++++++++++++++++++-
 arch/arm/plat-omap/include/plat/cpu.h |   22 +++++++++++++++--
 3 files changed, 65 insertions(+), 3 deletions(-)

Comments

Roger Quadros Nov. 2, 2012, 10:03 a.m. UTC | #1 
Hi Santosh,

I believe the change from cpu_is_xxx() to soc_is_xxx() just for OMAP5
leads to unnecessary confusion, even though soc_is_ is more technically
correct.

What do you think?

regards,
-roger

On 07/06/2012 12:21 PM, Santosh Shilimkar wrote:
> From: R Sricharan <r.sricharan@ti.com>
> 
> Adding the OMAP5 ES1.0, 2.0 and OMAP5432 cpu revision
> detection support.
> 
> Signed-off-by: R Sricharan <r.sricharan@ti.com>
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
>  arch/arm/mach-omap2/control.h         |    4 ++++
>  arch/arm/mach-omap2/id.c              |   42 ++++++++++++++++++++++++++++++++-
>  arch/arm/plat-omap/include/plat/cpu.h |   22 +++++++++++++++--
>  3 files changed, 65 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
> index 295b390..b8cdc85 100644
> --- a/arch/arm/mach-omap2/control.h
> +++ b/arch/arm/mach-omap2/control.h
> @@ -253,6 +253,10 @@
>  /* TI81XX CONTROL_DEVCONF register offsets */
>  #define TI81XX_CONTROL_DEVICE_ID	(TI81XX_CONTROL_DEVCONF + 0x000)
>  
> +/* OMAP54XX CONTROL STATUS register */
> +#define OMAP5XXX_CONTROL_STATUS                0x134
> +#define OMAP5_DEVICETYPE_MASK          (0x7 << 6)
> +
>  /*
>   * REVISIT: This list of registers is not comprehensive - there are more
>   * that should be added.
> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
> index 37eb95a..40373db 100644
> --- a/arch/arm/mach-omap2/id.c
> +++ b/arch/arm/mach-omap2/id.c
> @@ -50,6 +50,11 @@ int omap_type(void)
>  		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
>  	} else if (cpu_is_omap44xx()) {
>  		val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
> +	} else if (soc_is_omap54xx()) {
> +		val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
> +		val &= OMAP5_DEVICETYPE_MASK;
> +		val >>= 6;
> +		goto out;
>  	} else {
>  		pr_err("Cannot detect omap type!\n");
>  		goto out;
> @@ -100,7 +105,7 @@ static u16 tap_prod_id;
>  
>  void omap_get_die_id(struct omap_die_id *odi)
>  {
> -	if (cpu_is_omap44xx()) {
> +	if (cpu_is_omap44xx() || soc_is_omap54xx()) {
>  		odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
>  		odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
>  		odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
> @@ -513,6 +518,41 @@ void __init omap4xxx_check_revision(void)
>  		((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf));
>  }
>  
> +void __init omap5xxx_check_revision(void)
> +{
> +	u32 idcode;
> +	u16 hawkeye;
> +	u8 rev;
> +
> +	idcode = read_tap_reg(OMAP_TAP_IDCODE);
> +	hawkeye = (idcode >> 12) & 0xffff;
> +	rev = (idcode >> 28) & 0xff;
> +	switch (hawkeye) {
> +	case 0xb942:
> +		switch (rev) {
> +		case 0:
> +		default:
> +			omap_revision = OMAP5430_REV_ES1_0;
> +		}
> +		break;
> +
> +	case 0xb998:
> +		switch (rev) {
> +		case 0:
> +		default:
> +			omap_revision = OMAP5432_REV_ES1_0;
> +		}
> +		break;
> +
> +	default:
> +		/* Unknown default to latest silicon rev as default*/
> +		omap_revision = OMAP5430_REV_ES1_0;
> +	}
> +
> +	pr_info("OMAP%04x ES%d.0\n",
> +			omap_rev() >> 16, ((omap_rev() >> 12) & 0xf));
> +}
> +
>  /*
>   * Set up things for map_io and processor detection later on. Gets called
>   * pretty much first thing from board init. For multi-omap, this gets
> diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
> index 14f050f..e2d911d 100644
> --- a/arch/arm/plat-omap/include/plat/cpu.h
> +++ b/arch/arm/plat-omap/include/plat/cpu.h
> @@ -9,7 +9,7 @@
>   *
>   * Written by Tony Lindgren <tony.lindgren@nokia.com>
>   *
> - * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
> + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
>   *
>   * This program is free software; you can redistribute it and/or modify
>   * it under the terms of the GNU General Public License as published by
> @@ -70,6 +70,7 @@ unsigned int omap_rev(void);
>   * cpu_is_omap443x():	True for OMAP4430
>   * cpu_is_omap446x():	True for OMAP4460
>   * cpu_is_omap447x():	True for OMAP4470
> + * soc_is_omap543x():	True for OMAP5430, OMAP5432
>   */
>  #define GET_OMAP_CLASS	(omap_rev() & 0xff)
>  
> @@ -122,6 +123,7 @@ IS_OMAP_CLASS(24xx, 0x24)
>  IS_OMAP_CLASS(34xx, 0x34)
>  IS_OMAP_CLASS(44xx, 0x44)
>  IS_AM_CLASS(35xx, 0x35)
> +IS_OMAP_CLASS(54xx, 0x54)
>  IS_AM_CLASS(33xx, 0x33)
>  
>  IS_TI_CLASS(81xx, 0x81)
> @@ -133,6 +135,7 @@ IS_OMAP_SUBCLASS(363x, 0x363)
>  IS_OMAP_SUBCLASS(443x, 0x443)
>  IS_OMAP_SUBCLASS(446x, 0x446)
>  IS_OMAP_SUBCLASS(447x, 0x447)
> +IS_OMAP_SUBCLASS(543x, 0x543)
>  
>  IS_TI_SUBCLASS(816x, 0x816)
>  IS_TI_SUBCLASS(814x, 0x814)
> @@ -156,6 +159,8 @@ IS_AM_SUBCLASS(335x, 0x335)
>  #define cpu_is_omap443x()		0
>  #define cpu_is_omap446x()		0
>  #define cpu_is_omap447x()		0
> +#define soc_is_omap54xx()		0
> +#define soc_is_omap543x()		0
>  
>  #if defined(MULTI_OMAP1)
>  # if defined(CONFIG_ARCH_OMAP730)
> @@ -291,6 +296,7 @@ IS_OMAP_TYPE(3430, 0x3430)
>  #define cpu_is_omap2430()		0
>  #define cpu_is_omap3430()		0
>  #define cpu_is_omap3630()		0
> +#define soc_is_omap5430()		0
>  
>  /*
>   * Whether we have MULTI_OMAP1 or not, we still need to distinguish
> @@ -371,11 +377,18 @@ IS_OMAP_TYPE(3430, 0x3430)
>  # define cpu_is_omap447x()		is_omap447x()
>  # endif
>  
> +# if defined(CONFIG_SOC_OMAP5)
> +# undef soc_is_omap54xx
> +# undef soc_is_omap543x
> +# define soc_is_omap54xx()		is_omap54xx()
> +# define soc_is_omap543x()		is_omap543x()
> +#endif
> +
>  /* Macros to detect if we have OMAP1 or OMAP2 */
>  #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
>  				cpu_is_omap16xx())
>  #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
> -				cpu_is_omap44xx())
> +				cpu_is_omap44xx() || soc_is_omap54xx())
>  
>  /* Various silicon revisions for omap2 */
>  #define OMAP242X_CLASS		0x24200024
> @@ -428,9 +441,14 @@ IS_OMAP_TYPE(3430, 0x3430)
>  #define OMAP447X_CLASS		0x44700044
>  #define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
>  
> +#define OMAP54XX_CLASS		0x54000054
> +#define OMAP5430_REV_ES1_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
> +#define OMAP5432_REV_ES1_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
> +
>  void omap2xxx_check_revision(void);
>  void omap3xxx_check_revision(void);
>  void omap4xxx_check_revision(void);
> +void omap5xxx_check_revision(void);
>  void omap3xxx_check_features(void);
>  void ti81xx_check_features(void);
>  void omap4xxx_check_features(void);
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tony Lindgren Nov. 6, 2012, 6:18 p.m. UTC | #2 
* Roger Quadros <rogerq@ti.com> [121102 03:05]:
> Hi Santosh,
> 
> I believe the change from cpu_is_xxx() to soc_is_xxx() just for OMAP5
> leads to unnecessary confusion, even though soc_is_ is more technically
> correct.

All of them will be eventually soc_is_xxx() and private to
arch/arm/mach-omap2.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index 295b390..b8cdc85 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -253,6 +253,10 @@ 
 /* TI81XX CONTROL_DEVCONF register offsets */
 #define TI81XX_CONTROL_DEVICE_ID	(TI81XX_CONTROL_DEVCONF + 0x000)
 
+/* OMAP54XX CONTROL STATUS register */
+#define OMAP5XXX_CONTROL_STATUS                0x134
+#define OMAP5_DEVICETYPE_MASK          (0x7 << 6)
+
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 37eb95a..40373db 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -50,6 +50,11 @@  int omap_type(void)
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
 	} else if (cpu_is_omap44xx()) {
 		val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
+	} else if (soc_is_omap54xx()) {
+		val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
+		val &= OMAP5_DEVICETYPE_MASK;
+		val >>= 6;
+		goto out;
 	} else {
 		pr_err("Cannot detect omap type!\n");
 		goto out;
@@ -100,7 +105,7 @@  static u16 tap_prod_id;
 
 void omap_get_die_id(struct omap_die_id *odi)
 {
-	if (cpu_is_omap44xx()) {
+	if (cpu_is_omap44xx() || soc_is_omap54xx()) {
 		odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
 		odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
 		odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
@@ -513,6 +518,41 @@  void __init omap4xxx_check_revision(void)
 		((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf));
 }
 
+void __init omap5xxx_check_revision(void)
+{
+	u32 idcode;
+	u16 hawkeye;
+	u8 rev;
+
+	idcode = read_tap_reg(OMAP_TAP_IDCODE);
+	hawkeye = (idcode >> 12) & 0xffff;
+	rev = (idcode >> 28) & 0xff;
+	switch (hawkeye) {
+	case 0xb942:
+		switch (rev) {
+		case 0:
+		default:
+			omap_revision = OMAP5430_REV_ES1_0;
+		}
+		break;
+
+	case 0xb998:
+		switch (rev) {
+		case 0:
+		default:
+			omap_revision = OMAP5432_REV_ES1_0;
+		}
+		break;
+
+	default:
+		/* Unknown default to latest silicon rev as default*/
+		omap_revision = OMAP5430_REV_ES1_0;
+	}
+
+	pr_info("OMAP%04x ES%d.0\n",
+			omap_rev() >> 16, ((omap_rev() >> 12) & 0xf));
+}
+
 /*
  * Set up things for map_io and processor detection later on. Gets called
  * pretty much first thing from board init. For multi-omap, this gets
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 14f050f..e2d911d 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -9,7 +9,7 @@ 
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
- * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -70,6 +70,7 @@  unsigned int omap_rev(void);
  * cpu_is_omap443x():	True for OMAP4430
  * cpu_is_omap446x():	True for OMAP4460
  * cpu_is_omap447x():	True for OMAP4470
+ * soc_is_omap543x():	True for OMAP5430, OMAP5432
  */
 #define GET_OMAP_CLASS	(omap_rev() & 0xff)
 
@@ -122,6 +123,7 @@  IS_OMAP_CLASS(24xx, 0x24)
 IS_OMAP_CLASS(34xx, 0x34)
 IS_OMAP_CLASS(44xx, 0x44)
 IS_AM_CLASS(35xx, 0x35)
+IS_OMAP_CLASS(54xx, 0x54)
 IS_AM_CLASS(33xx, 0x33)
 
 IS_TI_CLASS(81xx, 0x81)
@@ -133,6 +135,7 @@  IS_OMAP_SUBCLASS(363x, 0x363)
 IS_OMAP_SUBCLASS(443x, 0x443)
 IS_OMAP_SUBCLASS(446x, 0x446)
 IS_OMAP_SUBCLASS(447x, 0x447)
+IS_OMAP_SUBCLASS(543x, 0x543)
 
 IS_TI_SUBCLASS(816x, 0x816)
 IS_TI_SUBCLASS(814x, 0x814)
@@ -156,6 +159,8 @@  IS_AM_SUBCLASS(335x, 0x335)
 #define cpu_is_omap443x()		0
 #define cpu_is_omap446x()		0
 #define cpu_is_omap447x()		0
+#define soc_is_omap54xx()		0
+#define soc_is_omap543x()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
@@ -291,6 +296,7 @@  IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_is_omap2430()		0
 #define cpu_is_omap3430()		0
 #define cpu_is_omap3630()		0
+#define soc_is_omap5430()		0
 
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
@@ -371,11 +377,18 @@  IS_OMAP_TYPE(3430, 0x3430)
 # define cpu_is_omap447x()		is_omap447x()
 # endif
 
+# if defined(CONFIG_SOC_OMAP5)
+# undef soc_is_omap54xx
+# undef soc_is_omap543x
+# define soc_is_omap54xx()		is_omap54xx()
+# define soc_is_omap543x()		is_omap543x()
+#endif
+
 /* Macros to detect if we have OMAP1 or OMAP2 */
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx())
+				cpu_is_omap44xx() || soc_is_omap54xx())
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
@@ -428,9 +441,14 @@  IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP447X_CLASS		0x44700044
 #define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
 
+#define OMAP54XX_CLASS		0x54000054
+#define OMAP5430_REV_ES1_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES1_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);
 void omap4xxx_check_revision(void);
+void omap5xxx_check_revision(void);
 void omap3xxx_check_features(void);
 void ti81xx_check_features(void);
 void omap4xxx_check_features(void);