diff mbox

[05/11] ARM: at91: convert timer suspend/resume to clock_event_device

Message ID 1352408516-21988-7-git-send-email-swarren@wwwdotorg.org (mailing list archive)
State New, archived
Headers show

Commit Message

Stephen Warren Nov. 8, 2012, 9:01 p.m. UTC 
From: Stephen Warren <swarren@nvidia.com>

Move at91's timer suspend/resume functions from struct sys_timer
at91sam926x_timer into struct clock_event_device pit_clkevt. This
will allow the sys_timer suspend/resume fields to be removed, and
eventually lead to a complete removal of struct sys_timer.

Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
 arch/arm/mach-at91/at91sam926x_time.c |   47 ++++++++++++++++++--------------
 1 files changed, 26 insertions(+), 21 deletions(-)

Comments

Jean-Christophe PLAGNIOL-VILLARD Nov. 12, 2012, 2:49 p.m. UTC | #1 
On 14:01 Thu 08 Nov     , Stephen Warren wrote:
> From: Stephen Warren <swarren@nvidia.com>
> 
> Move at91's timer suspend/resume functions from struct sys_timer
> at91sam926x_timer into struct clock_event_device pit_clkevt. This
> will allow the sys_timer suspend/resume fields to be removed, and
> eventually lead to a complete removal of struct sys_timer.
> 
> Cc: Andrew Victor <linux@maxim.org.za>
> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> Signed-off-by: Stephen Warren <swarren@nvidia.com>
> ---
look fine

Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Best Regards,
J.
diff mbox

Patch

diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index ffc0957..2794882 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -94,12 +94,38 @@  pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 	}
 }
 
+static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
+{
+	/* Disable timer */
+	pit_write(AT91_PIT_MR, 0);
+}
+
+static void at91sam926x_pit_reset(void)
+{
+	/* Disable timer and irqs */
+	pit_write(AT91_PIT_MR, 0);
+
+	/* Clear any pending interrupts, wait for PIT to stop counting */
+	while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
+		cpu_relax();
+
+	/* Start PIT but don't enable IRQ */
+	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+}
+
+static void at91sam926x_pit_resume(struct clock_event_device *cedev)
+{
+	at91sam926x_pit_reset();
+}
+
 static struct clock_event_device pit_clkevt = {
 	.name		= "pit",
 	.features	= CLOCK_EVT_FEAT_PERIODIC,
 	.shift		= 32,
 	.rating		= 100,
 	.set_mode	= pit_clkevt_mode,
+	.suspend	= at91sam926x_pit_suspend,
+	.resume		= at91sam926x_pit_resume,
 };
 
 
@@ -140,19 +166,6 @@  static struct irqaction at91sam926x_pit_irq = {
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };
 
-static void at91sam926x_pit_reset(void)
-{
-	/* Disable timer and irqs */
-	pit_write(AT91_PIT_MR, 0);
-
-	/* Clear any pending interrupts, wait for PIT to stop counting */
-	while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
-		cpu_relax();
-
-	/* Start PIT but don't enable IRQ */
-	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-}
-
 #ifdef CONFIG_OF
 static struct of_device_id pit_timer_ids[] = {
 	{ .compatible = "atmel,at91sam9260-pit" },
@@ -240,12 +253,6 @@  static void __init at91sam926x_pit_init(void)
 	clockevents_register_device(&pit_clkevt);
 }
 
-static void at91sam926x_pit_suspend(void)
-{
-	/* Disable timer */
-	pit_write(AT91_PIT_MR, 0);
-}
-
 void __init at91sam926x_ioremap_pit(u32 addr)
 {
 #if defined(CONFIG_OF)
@@ -265,6 +272,4 @@  void __init at91sam926x_ioremap_pit(u32 addr)
 
 struct sys_timer at91sam926x_timer = {
 	.init		= at91sam926x_pit_init,
-	.suspend	= at91sam926x_pit_suspend,
-	.resume		= at91sam926x_pit_reset,
 };