| Message ID | 1352257033-32495-8-git-send-email-mgreer@animalcreek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Nov 7, 2012 at 4:57 AM, Mark A. Greer <mgreer@animalcreek.com> wrote: > From: "Mark A. Greer" <mgreer@animalcreek.com> > > Remove usage of the private OMAP DMA API. > The dmaengine API will be used instead. > > CC: Russell King <rmk+kernel@arm.linux.org.uk> > CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> > Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> > --- > drivers/crypto/omap-sham.c | 117 --------------------------------------------- > 1 file changed, 117 deletions(-) > > diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c > index b57277c..ebb5255 100644 > --- a/drivers/crypto/omap-sham.c > +++ b/drivers/crypto/omap-sham.c > @@ -13,8 +13,6 @@ > * Some ideas are from old omap-sha1-md5.c driver. > */ > > -#define OMAP_SHAM_DMA_PRIVATE > - > #define pr_fmt(fmt) "%s: " fmt, __func__ > > #include <linux/err.h> > @@ -29,10 +27,8 @@ > #include <linux/platform_device.h> > #include <linux/scatterlist.h> > #include <linux/dma-mapping.h> > -#ifndef OMAP_SHAM_DMA_PRIVATE > #include <linux/dmaengine.h> > #include <linux/omap-dma.h> > -#endif > #include <linux/pm_runtime.h> > #include <linux/delay.h> > #include <linux/crypto.h> > @@ -43,12 +39,6 @@ > #include <crypto/hash.h> > #include <crypto/internal/hash.h> > > -#ifdef OMAP_SHAM_DMA_PRIVATE > -#include <plat/cpu.h> > -#include <plat/dma.h> > -#include <mach/irqs.h> > -#endif > - > #define SHA_REG_DIGEST(x) (0x00 + ((x) * 0x04)) > #define SHA_REG_DIN(x) (0x1C + ((x) * 0x04)) > > @@ -120,9 +110,7 @@ struct omap_sham_reqctx { > > /* walk state */ > struct scatterlist *sg; > -#ifndef OMAP_SHAM_DMA_PRIVATE > struct scatterlist sgl; > -#endif > unsigned int offset; /* offset in current sg */ > unsigned int total; /* total request */ > > @@ -156,12 +144,7 @@ struct omap_sham_dev { > int irq; > spinlock_t lock; > int err; > -#ifdef OMAP_SHAM_DMA_PRIVATE > - int dma; > - int dma_lch; > -#else > struct dma_chan *dma_lch; > -#endif > struct tasklet_struct done_task; > > unsigned long flags; > @@ -331,7 +314,6 @@ static int omap_sham_xmit_cpu(struct omap_sham_dev *dd, const u8 *buf, > return -EINPROGRESS; > } > > -#ifndef OMAP_SHAM_DMA_PRIVATE > static void omap_sham_dma_callback(void *param) > { > struct omap_sham_dev *dd = param; > @@ -339,34 +321,18 @@ static void omap_sham_dma_callback(void *param) > set_bit(FLAGS_DMA_READY, &dd->flags); > tasklet_schedule(&dd->done_task); > } > -#endif > > static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr, > size_t length, int final, int is_sg) > { > struct omap_sham_reqctx *ctx = ahash_request_ctx(dd->req); > -#ifdef OMAP_SHAM_DMA_PRIVATE > - int len32; > -#else > struct dma_async_tx_descriptor *tx; > struct dma_slave_config cfg; > int ret; > -#endif > > dev_dbg(dd->dev, "xmit_dma: digcnt: %d, length: %d, final: %d\n", > ctx->digcnt, length, final); > > -#ifdef OMAP_SHAM_DMA_PRIVATE > - len32 = DIV_ROUND_UP(length, sizeof(u32)); > - > - omap_set_dma_transfer_params(dd->dma_lch, OMAP_DMA_DATA_TYPE_S32, len32, > - 1, OMAP_DMA_SYNC_PACKET, dd->dma, > - OMAP_DMA_DST_SYNC_PREFETCH); > - > - omap_set_dma_src_params(dd->dma_lch, 0, OMAP_DMA_AMODE_POST_INC, > - dma_addr, 0, 0); > - > -#else > memset(&cfg, 0, sizeof(cfg)); > > cfg.dst_addr = dd->phys_base + SHA_REG_DIN(0); > @@ -406,7 +372,6 @@ static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr, > > tx->callback = omap_sham_dma_callback; > tx->callback_param = dd; > -#endif > > omap_sham_write_ctrl(dd, length, final, 1); > > @@ -417,12 +382,8 @@ static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr, > > set_bit(FLAGS_DMA_ACTIVE, &dd->flags); > > -#ifdef OMAP_SHAM_DMA_PRIVATE > - omap_start_dma(dd->dma_lch); > -#else > dmaengine_submit(tx); > dma_async_issue_pending(dd->dma_lch); > -#endif > > return -EINPROGRESS; > } > @@ -528,7 +489,6 @@ static int omap_sham_update_dma_start(struct omap_sham_dev *dd) > if (ctx->bufcnt || ctx->offset) > return omap_sham_update_dma_slow(dd); > > -#ifndef OMAP_SHAM_DMA_PRIVATE > /* > * Don't use the sg interface when the transfer size is less > * than the number of elements in a DMA frame. Otherwise, > @@ -537,7 +497,6 @@ static int omap_sham_update_dma_start(struct omap_sham_dev *dd) > */ > if (ctx->total < (DST_MAXBURST * sizeof(u32))) > return omap_sham_update_dma_slow(dd); > -#endif > > dev_dbg(dd->dev, "fast: digcnt: %d, bufcnt: %u, total: %u\n", > ctx->digcnt, ctx->bufcnt, ctx->total); > @@ -599,11 +558,7 @@ static int omap_sham_update_dma_stop(struct omap_sham_dev *dd) > { > struct omap_sham_reqctx *ctx = ahash_request_ctx(dd->req); > > -#ifdef OMAP_SHAM_DMA_PRIVATE > - omap_stop_dma(dd->dma_lch); > -#else > dmaengine_terminate_all(dd->dma_lch); > -#endif > > if (ctx->flags & BIT(FLAGS_SG)) { > dma_unmap_sg(dd->dev, ctx->sg, 1, DMA_TO_DEVICE); > @@ -807,18 +762,6 @@ static int omap_sham_handle_queue(struct omap_sham_dev *dd, > if (err) > goto err1; > > -#ifdef OMAP_SHAM_DMA_PRIVATE > - omap_set_dma_dest_params(dd->dma_lch, 0, > - OMAP_DMA_AMODE_CONSTANT, > - dd->phys_base + SHA_REG_DIN(0), 0, 16); > - > - omap_set_dma_dest_burst_mode(dd->dma_lch, > - OMAP_DMA_DATA_BURST_16); > - > - omap_set_dma_src_burst_mode(dd->dma_lch, > - OMAP_DMA_DATA_BURST_4); Burst mode significantly improves performance. How do you configure burst mode with new API? - Dmitry > -#endif > - > if (ctx->digcnt) > /* request has changed - restore hash */ > omap_sham_copy_hash(req, 0); > @@ -1209,55 +1152,13 @@ static irqreturn_t omap_sham_irq(int irq, void *dev_id) > return IRQ_HANDLED; > } > > -#ifdef OMAP_SHAM_DMA_PRIVATE > -static void omap_sham_dma_callback(int lch, u16 ch_status, void *data) > -{ > - struct omap_sham_dev *dd = data; > - > - if (ch_status != OMAP_DMA_BLOCK_IRQ) { > - pr_err("omap-sham DMA error status: 0x%hx\n", ch_status); > - dd->err = -EIO; > - clear_bit(FLAGS_INIT, &dd->flags);/* request to re-initialize */ > - } > - > - set_bit(FLAGS_DMA_READY, &dd->flags); > - tasklet_schedule(&dd->done_task); > -} > - > -static int omap_sham_dma_init(struct omap_sham_dev *dd) > -{ > - int err; > - > - dd->dma_lch = -1; > - > - err = omap_request_dma(dd->dma, dev_name(dd->dev), > - omap_sham_dma_callback, dd, &dd->dma_lch); > - if (err) { > - dev_err(dd->dev, "Unable to request DMA channel\n"); > - return err; > - } > - > - return 0; > -} > - > -static void omap_sham_dma_cleanup(struct omap_sham_dev *dd) > -{ > - if (dd->dma_lch >= 0) { > - omap_free_dma(dd->dma_lch); > - dd->dma_lch = -1; > - } > -} > -#endif > - > static int __devinit omap_sham_probe(struct platform_device *pdev) > { > struct omap_sham_dev *dd; > struct device *dev = &pdev->dev; > struct resource *res; > -#ifndef OMAP_SHAM_DMA_PRIVATE > dma_cap_mask_t mask; > unsigned dma_chan; > -#endif > int err, i, j; > > dd = kzalloc(sizeof(struct omap_sham_dev), GFP_KERNEL); > @@ -1292,11 +1193,7 @@ static int __devinit omap_sham_probe(struct platform_device *pdev) > err = -ENODEV; > goto res_err; > } > -#ifdef OMAP_SHAM_DMA_PRIVATE > - dd->dma = res->start; > -#else > dma_chan = res->start; > -#endif > > /* Get the IRQ */ > dd->irq = platform_get_irq(pdev, 0); > @@ -1313,11 +1210,6 @@ static int __devinit omap_sham_probe(struct platform_device *pdev) > goto res_err; > } > > -#ifdef OMAP_SHAM_DMA_PRIVATE > - err = omap_sham_dma_init(dd); > - if (err) > - goto dma_err; > -#else > dma_cap_zero(mask); > dma_cap_set(DMA_SLAVE, mask); > > @@ -1328,7 +1220,6 @@ static int __devinit omap_sham_probe(struct platform_device *pdev) > err = -ENXIO; > goto dma_err; > } > -#endif > > dd->io_base = ioremap(dd->phys_base, SZ_4K); > if (!dd->io_base) { > @@ -1364,11 +1255,7 @@ err_algs: > iounmap(dd->io_base); > pm_runtime_disable(dev); > io_err: > -#ifdef OMAP_SHAM_DMA_PRIVATE > - omap_sham_dma_cleanup(dd); > -#else > dma_release_channel(dd->dma_lch); > -#endif > dma_err: > if (dd->irq >= 0) > free_irq(dd->irq, dd); > @@ -1397,11 +1284,7 @@ static int __devexit omap_sham_remove(struct platform_device *pdev) > tasklet_kill(&dd->done_task); > iounmap(dd->io_base); > pm_runtime_disable(&pdev->dev); > -#ifdef OMAP_SHAM_DMA_PRIVATE > - omap_sham_dma_cleanup(dd); > -#else > dma_release_channel(dd->dma_lch); > -#endif > if (dd->irq >= 0) > free_irq(dd->irq, dd); > kfree(dd); > -- > 1.7.12 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Nov 09, 2012 at 06:28:16PM +0200, Kasatkin, Dmitry wrote: > On Wed, Nov 7, 2012 at 4:57 AM, Mark A. Greer <mgreer@animalcreek.com> wrote: > > From: "Mark A. Greer" <mgreer@animalcreek.com> > > > > Remove usage of the private OMAP DMA API. > > The dmaengine API will be used instead. > > > > CC: Russell King <rmk+kernel@arm.linux.org.uk> > > CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> > > Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> > > --- > > drivers/crypto/omap-sham.c | 117 --------------------------------------------- > > 1 file changed, 117 deletions(-) > > > > diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c > > index b57277c..ebb5255 100644 > > --- a/drivers/crypto/omap-sham.c > > +++ b/drivers/crypto/omap-sham.c > > @@ -807,18 +762,6 @@ static int omap_sham_handle_queue(struct omap_sham_dev *dd, > > if (err) > > goto err1; > > > > -#ifdef OMAP_SHAM_DMA_PRIVATE > > - omap_set_dma_dest_params(dd->dma_lch, 0, > > - OMAP_DMA_AMODE_CONSTANT, > > - dd->phys_base + SHA_REG_DIN(0), 0, 16); > > - > > - omap_set_dma_dest_burst_mode(dd->dma_lch, > > - OMAP_DMA_DATA_BURST_16); > > - > > - omap_set_dma_src_burst_mode(dd->dma_lch, > > - OMAP_DMA_DATA_BURST_4); > > Burst mode significantly improves performance. > How do you configure burst mode with new API? This is (or should be) taken care of by the dmaengine infrastructure. I've noted that there's an issue and there is a discussion about it here: http://www.spinics.net/lists/linux-omap/msg79855.html We probably need to extend the dmaengine API to allow API-users to request specific tweaks/optimizations/whatever but that's MHO. Mark -- -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Nov 9, 2012 at 9:17 AM, Mark A. Greer <mgreer@animalcreek.com> wrote: > On Fri, Nov 09, 2012 at 06:28:16PM +0200, Kasatkin, Dmitry wrote: >> On Wed, Nov 7, 2012 at 4:57 AM, Mark A. Greer <mgreer@animalcreek.com> wrote: >> > From: "Mark A. Greer" <mgreer@animalcreek.com> >> > >> > Remove usage of the private OMAP DMA API. >> > The dmaengine API will be used instead. >> > >> > CC: Russell King <rmk+kernel@arm.linux.org.uk> >> > CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> >> > Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> >> > --- >> > drivers/crypto/omap-sham.c | 117 --------------------------------------------- >> > 1 file changed, 117 deletions(-) >> > >> > diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c >> > index b57277c..ebb5255 100644 >> > --- a/drivers/crypto/omap-sham.c >> > +++ b/drivers/crypto/omap-sham.c > >> > @@ -807,18 +762,6 @@ static int omap_sham_handle_queue(struct omap_sham_dev *dd, >> > if (err) >> > goto err1; >> > >> > -#ifdef OMAP_SHAM_DMA_PRIVATE >> > - omap_set_dma_dest_params(dd->dma_lch, 0, >> > - OMAP_DMA_AMODE_CONSTANT, >> > - dd->phys_base + SHA_REG_DIN(0), 0, 16); >> > - >> > - omap_set_dma_dest_burst_mode(dd->dma_lch, >> > - OMAP_DMA_DATA_BURST_16); >> > - >> > - omap_set_dma_src_burst_mode(dd->dma_lch, >> > - OMAP_DMA_DATA_BURST_4); >> >> Burst mode significantly improves performance. >> How do you configure burst mode with new API? > > This is (or should be) taken care of by the dmaengine infrastructure. > I've noted that there's an issue and there is a discussion about it > here: > > http://www.spinics.net/lists/linux-omap/msg79855.html > > We probably need to extend the dmaengine API to allow API-users to > request specific tweaks/optimizations/whatever but that's MHO. > Hello, I am in favor of new APIs. The only my concern is that it performs worse.. Is it possible to keep burst mode setting there? - Dmitry > Mark > -- -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Nov 13, 2012 at 11:47:57PM -0800, Kasatkin, Dmitry wrote: > On Fri, Nov 9, 2012 at 9:17 AM, Mark A. Greer <mgreer@animalcreek.com> wrote: > > On Fri, Nov 09, 2012 at 06:28:16PM +0200, Kasatkin, Dmitry wrote: > >> On Wed, Nov 7, 2012 at 4:57 AM, Mark A. Greer <mgreer@animalcreek.com> wrote: > >> > From: "Mark A. Greer" <mgreer@animalcreek.com> > >> > > >> > Remove usage of the private OMAP DMA API. > >> > The dmaengine API will be used instead. > >> > > >> > CC: Russell King <rmk+kernel@arm.linux.org.uk> > >> > CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> > >> > Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> > >> > --- > >> > drivers/crypto/omap-sham.c | 117 --------------------------------------------- > >> > 1 file changed, 117 deletions(-) > >> > > >> > diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c > >> > index b57277c..ebb5255 100644 > >> > --- a/drivers/crypto/omap-sham.c > >> > +++ b/drivers/crypto/omap-sham.c > > > >> > @@ -807,18 +762,6 @@ static int omap_sham_handle_queue(struct omap_sham_dev *dd, > >> > if (err) > >> > goto err1; > >> > > >> > -#ifdef OMAP_SHAM_DMA_PRIVATE > >> > - omap_set_dma_dest_params(dd->dma_lch, 0, > >> > - OMAP_DMA_AMODE_CONSTANT, > >> > - dd->phys_base + SHA_REG_DIN(0), 0, 16); > >> > - > >> > - omap_set_dma_dest_burst_mode(dd->dma_lch, > >> > - OMAP_DMA_DATA_BURST_16); > >> > - > >> > - omap_set_dma_src_burst_mode(dd->dma_lch, > >> > - OMAP_DMA_DATA_BURST_4); > >> > >> Burst mode significantly improves performance. > >> How do you configure burst mode with new API? > > > > This is (or should be) taken care of by the dmaengine infrastructure. > > I've noted that there's an issue and there is a discussion about it > > here: > > > > http://www.spinics.net/lists/linux-omap/msg79855.html > > > > We probably need to extend the dmaengine API to allow API-users to > > request specific tweaks/optimizations/whatever but that's MHO. > > > > Hello, > > I am in favor of new APIs. > The only my concern is that it performs worse.. > > Is it possible to keep burst mode setting there? I'm going to respin the patch the I posted in the email thread above to only set bursting for non-cyclic DMAs. Mark -- -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Nov 14, 2012 at 09:47:55AM -0700, Mark A. Greer wrote: > On Tue, Nov 13, 2012 at 11:47:57PM -0800, Kasatkin, Dmitry wrote: > > On Fri, Nov 9, 2012 at 9:17 AM, Mark A. Greer <mgreer@animalcreek.com> wrote: > > > On Fri, Nov 09, 2012 at 06:28:16PM +0200, Kasatkin, Dmitry wrote: > > >> On Wed, Nov 7, 2012 at 4:57 AM, Mark A. Greer <mgreer@animalcreek.com> wrote: > > >> > From: "Mark A. Greer" <mgreer@animalcreek.com> > > >> > > > >> > Remove usage of the private OMAP DMA API. > > >> > The dmaengine API will be used instead. > > >> > > > >> > CC: Russell King <rmk+kernel@arm.linux.org.uk> > > >> > CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> > > >> > Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> > > >> > --- > > >> > drivers/crypto/omap-sham.c | 117 --------------------------------------------- > > >> > 1 file changed, 117 deletions(-) > > >> > > > >> > diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c > > >> > index b57277c..ebb5255 100644 > > >> > --- a/drivers/crypto/omap-sham.c > > >> > +++ b/drivers/crypto/omap-sham.c > > > > > >> > @@ -807,18 +762,6 @@ static int omap_sham_handle_queue(struct omap_sham_dev *dd, > > >> > if (err) > > >> > goto err1; > > >> > > > >> > -#ifdef OMAP_SHAM_DMA_PRIVATE > > >> > - omap_set_dma_dest_params(dd->dma_lch, 0, > > >> > - OMAP_DMA_AMODE_CONSTANT, > > >> > - dd->phys_base + SHA_REG_DIN(0), 0, 16); > > >> > - > > >> > - omap_set_dma_dest_burst_mode(dd->dma_lch, > > >> > - OMAP_DMA_DATA_BURST_16); > > >> > - > > >> > - omap_set_dma_src_burst_mode(dd->dma_lch, > > >> > - OMAP_DMA_DATA_BURST_4); > > >> > > >> Burst mode significantly improves performance. > > >> How do you configure burst mode with new API? > > > > > > This is (or should be) taken care of by the dmaengine infrastructure. > > > I've noted that there's an issue and there is a discussion about it > > > here: > > > > > > http://www.spinics.net/lists/linux-omap/msg79855.html > > > > > > We probably need to extend the dmaengine API to allow API-users to > > > request specific tweaks/optimizations/whatever but that's MHO. > > > > > > > Hello, > > > > I am in favor of new APIs. > > The only my concern is that it performs worse.. > > > > Is it possible to keep burst mode setting there? > > I'm going to respin the patch the I posted in the email thread above > to only set bursting for non-cyclic DMAs. Just sent. Should be in your inbox shortly. Mark -- -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c index b57277c..ebb5255 100644 --- a/drivers/crypto/omap-sham.c +++ b/drivers/crypto/omap-sham.c @@ -13,8 +13,6 @@ * Some ideas are from old omap-sha1-md5.c driver. */ -#define OMAP_SHAM_DMA_PRIVATE - #define pr_fmt(fmt) "%s: " fmt, __func__ #include <linux/err.h> @@ -29,10 +27,8 @@ #include <linux/platform_device.h> #include <linux/scatterlist.h> #include <linux/dma-mapping.h> -#ifndef OMAP_SHAM_DMA_PRIVATE #include <linux/dmaengine.h> #include <linux/omap-dma.h> -#endif #include <linux/pm_runtime.h> #include <linux/delay.h> #include <linux/crypto.h> @@ -43,12 +39,6 @@ #include <crypto/hash.h> #include <crypto/internal/hash.h> -#ifdef OMAP_SHAM_DMA_PRIVATE -#include <plat/cpu.h> -#include <plat/dma.h> -#include <mach/irqs.h> -#endif - #define SHA_REG_DIGEST(x) (0x00 + ((x) * 0x04)) #define SHA_REG_DIN(x) (0x1C + ((x) * 0x04)) @@ -120,9 +110,7 @@ struct omap_sham_reqctx { /* walk state */ struct scatterlist *sg; -#ifndef OMAP_SHAM_DMA_PRIVATE struct scatterlist sgl; -#endif unsigned int offset; /* offset in current sg */ unsigned int total; /* total request */ @@ -156,12 +144,7 @@ struct omap_sham_dev { int irq; spinlock_t lock; int err; -#ifdef OMAP_SHAM_DMA_PRIVATE - int dma; - int dma_lch; -#else struct dma_chan *dma_lch; -#endif struct tasklet_struct done_task; unsigned long flags; @@ -331,7 +314,6 @@ static int omap_sham_xmit_cpu(struct omap_sham_dev *dd, const u8 *buf, return -EINPROGRESS; } -#ifndef OMAP_SHAM_DMA_PRIVATE static void omap_sham_dma_callback(void *param) { struct omap_sham_dev *dd = param; @@ -339,34 +321,18 @@ static void omap_sham_dma_callback(void *param) set_bit(FLAGS_DMA_READY, &dd->flags); tasklet_schedule(&dd->done_task); } -#endif static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr, size_t length, int final, int is_sg) { struct omap_sham_reqctx *ctx = ahash_request_ctx(dd->req); -#ifdef OMAP_SHAM_DMA_PRIVATE - int len32; -#else struct dma_async_tx_descriptor *tx; struct dma_slave_config cfg; int ret; -#endif dev_dbg(dd->dev, "xmit_dma: digcnt: %d, length: %d, final: %d\n", ctx->digcnt, length, final); -#ifdef OMAP_SHAM_DMA_PRIVATE - len32 = DIV_ROUND_UP(length, sizeof(u32)); - - omap_set_dma_transfer_params(dd->dma_lch, OMAP_DMA_DATA_TYPE_S32, len32, - 1, OMAP_DMA_SYNC_PACKET, dd->dma, - OMAP_DMA_DST_SYNC_PREFETCH); - - omap_set_dma_src_params(dd->dma_lch, 0, OMAP_DMA_AMODE_POST_INC, - dma_addr, 0, 0); - -#else memset(&cfg, 0, sizeof(cfg)); cfg.dst_addr = dd->phys_base + SHA_REG_DIN(0); @@ -406,7 +372,6 @@ static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr, tx->callback = omap_sham_dma_callback; tx->callback_param = dd; -#endif omap_sham_write_ctrl(dd, length, final, 1); @@ -417,12 +382,8 @@ static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr, set_bit(FLAGS_DMA_ACTIVE, &dd->flags); -#ifdef OMAP_SHAM_DMA_PRIVATE - omap_start_dma(dd->dma_lch); -#else dmaengine_submit(tx); dma_async_issue_pending(dd->dma_lch); -#endif return -EINPROGRESS; } @@ -528,7 +489,6 @@ static int omap_sham_update_dma_start(struct omap_sham_dev *dd) if (ctx->bufcnt || ctx->offset) return omap_sham_update_dma_slow(dd); -#ifndef OMAP_SHAM_DMA_PRIVATE /* * Don't use the sg interface when the transfer size is less * than the number of elements in a DMA frame. Otherwise, @@ -537,7 +497,6 @@ static int omap_sham_update_dma_start(struct omap_sham_dev *dd) */ if (ctx->total < (DST_MAXBURST * sizeof(u32))) return omap_sham_update_dma_slow(dd); -#endif dev_dbg(dd->dev, "fast: digcnt: %d, bufcnt: %u, total: %u\n", ctx->digcnt, ctx->bufcnt, ctx->total); @@ -599,11 +558,7 @@ static int omap_sham_update_dma_stop(struct omap_sham_dev *dd) { struct omap_sham_reqctx *ctx = ahash_request_ctx(dd->req); -#ifdef OMAP_SHAM_DMA_PRIVATE - omap_stop_dma(dd->dma_lch); -#else dmaengine_terminate_all(dd->dma_lch); -#endif if (ctx->flags & BIT(FLAGS_SG)) { dma_unmap_sg(dd->dev, ctx->sg, 1, DMA_TO_DEVICE); @@ -807,18 +762,6 @@ static int omap_sham_handle_queue(struct omap_sham_dev *dd, if (err) goto err1; -#ifdef OMAP_SHAM_DMA_PRIVATE - omap_set_dma_dest_params(dd->dma_lch, 0, - OMAP_DMA_AMODE_CONSTANT, - dd->phys_base + SHA_REG_DIN(0), 0, 16); - - omap_set_dma_dest_burst_mode(dd->dma_lch, - OMAP_DMA_DATA_BURST_16); - - omap_set_dma_src_burst_mode(dd->dma_lch, - OMAP_DMA_DATA_BURST_4); -#endif - if (ctx->digcnt) /* request has changed - restore hash */ omap_sham_copy_hash(req, 0); @@ -1209,55 +1152,13 @@ static irqreturn_t omap_sham_irq(int irq, void *dev_id) return IRQ_HANDLED; } -#ifdef OMAP_SHAM_DMA_PRIVATE -static void omap_sham_dma_callback(int lch, u16 ch_status, void *data) -{ - struct omap_sham_dev *dd = data; - - if (ch_status != OMAP_DMA_BLOCK_IRQ) { - pr_err("omap-sham DMA error status: 0x%hx\n", ch_status); - dd->err = -EIO; - clear_bit(FLAGS_INIT, &dd->flags);/* request to re-initialize */ - } - - set_bit(FLAGS_DMA_READY, &dd->flags); - tasklet_schedule(&dd->done_task); -} - -static int omap_sham_dma_init(struct omap_sham_dev *dd) -{ - int err; - - dd->dma_lch = -1; - - err = omap_request_dma(dd->dma, dev_name(dd->dev), - omap_sham_dma_callback, dd, &dd->dma_lch); - if (err) { - dev_err(dd->dev, "Unable to request DMA channel\n"); - return err; - } - - return 0; -} - -static void omap_sham_dma_cleanup(struct omap_sham_dev *dd) -{ - if (dd->dma_lch >= 0) { - omap_free_dma(dd->dma_lch); - dd->dma_lch = -1; - } -} -#endif - static int __devinit omap_sham_probe(struct platform_device *pdev) { struct omap_sham_dev *dd; struct device *dev = &pdev->dev; struct resource *res; -#ifndef OMAP_SHAM_DMA_PRIVATE dma_cap_mask_t mask; unsigned dma_chan; -#endif int err, i, j; dd = kzalloc(sizeof(struct omap_sham_dev), GFP_KERNEL); @@ -1292,11 +1193,7 @@ static int __devinit omap_sham_probe(struct platform_device *pdev) err = -ENODEV; goto res_err; } -#ifdef OMAP_SHAM_DMA_PRIVATE - dd->dma = res->start; -#else dma_chan = res->start; -#endif /* Get the IRQ */ dd->irq = platform_get_irq(pdev, 0); @@ -1313,11 +1210,6 @@ static int __devinit omap_sham_probe(struct platform_device *pdev) goto res_err; } -#ifdef OMAP_SHAM_DMA_PRIVATE - err = omap_sham_dma_init(dd); - if (err) - goto dma_err; -#else dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); @@ -1328,7 +1220,6 @@ static int __devinit omap_sham_probe(struct platform_device *pdev) err = -ENXIO; goto dma_err; } -#endif dd->io_base = ioremap(dd->phys_base, SZ_4K); if (!dd->io_base) { @@ -1364,11 +1255,7 @@ err_algs: iounmap(dd->io_base); pm_runtime_disable(dev); io_err: -#ifdef OMAP_SHAM_DMA_PRIVATE - omap_sham_dma_cleanup(dd); -#else dma_release_channel(dd->dma_lch); -#endif dma_err: if (dd->irq >= 0) free_irq(dd->irq, dd); @@ -1397,11 +1284,7 @@ static int __devexit omap_sham_remove(struct platform_device *pdev) tasklet_kill(&dd->done_task); iounmap(dd->io_base); pm_runtime_disable(&pdev->dev); -#ifdef OMAP_SHAM_DMA_PRIVATE - omap_sham_dma_cleanup(dd); -#else dma_release_channel(dd->dma_lch); -#endif if (dd->irq >= 0) free_irq(dd->irq, dd); kfree(dd);