new file mode 100644
@@ -0,0 +1,2813 @@
+/*
+ * Copyright (c) 2011,2012 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define FUNCTION_DATA f11_data
+#define FNUM 11
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/kconfig.h>
+#include <linux/rmi.h>
+#include <linux/slab.h>
+#include "rmi_driver.h"
+
+#ifdef CONFIG_RMI4_DEBUG
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#endif
+
+#define F11_MAX_NUM_OF_SENSORS 8
+#define F11_MAX_NUM_OF_FINGERS 10
+#define F11_MAX_NUM_OF_TOUCH_SHAPES 16
+
+#define F11_REL_POS_MIN -128
+#define F11_REL_POS_MAX 127
+
+#define FINGER_STATE_MASK 0x03
+
+#define F11_CTRL_SENSOR_MAX_X_POS_OFFSET 6
+#define F11_CTRL_SENSOR_MAX_Y_POS_OFFSET 8
+
+#define DEFAULT_XY_MAX 9999
+#define DEFAULT_MAX_ABS_MT_PRESSURE 255
+#define DEFAULT_MAX_ABS_MT_TOUCH 15
+#define DEFAULT_MAX_ABS_MT_ORIENTATION 1
+#define DEFAULT_MIN_ABS_MT_TRACKING_ID 1
+#define DEFAULT_MAX_ABS_MT_TRACKING_ID 10
+#define NAME_BUFFER_SIZE 256
+#define FUNCTION_NUMBER 0x11
+
+/** A note about RMI4 F11 register structure.
+ *
+ * There may be one or more individual 2D touch surfaces associated with an
+ * instance for F11. For example, a handheld device might have a touchscreen
+ * display on the front, and a touchpad on the back. F11 represents these touch
+ * surfaces as individual sensors, up to 7 on a given RMI4 device.
+ *
+ * The properties for
+ * a given sensor are described by its query registers. The number of query
+ * registers and the layout of their contents are described by the F11 device
+ * queries as well as the per-sensor query information. The query registers
+ * for sensor[n+1] immediately follow those for sensor[n], so the start address
+ * of the sensor[n+1] queries can only be computed if you know the size of the
+ * sensor[n] queries. Because each of the sensors may have different
+ * properties, the size of the query registers for each sensor must be
+ * calculated on a sensor by sensor basis.
+ *
+ * Similarly, each sensor has control registers that govern its behavior. The
+ * size and layout of the control registers for a given sensor can be determined
+ * by parsing that sensors query registers. The control registers for
+ * sensor[n+1] immediately follow those for sensor[n], so you can only know
+ * the start address for the sensor[n+1] controls if you know the size (and
+ * location) of the sensor[n] controls.
+ *
+ * And in a likewise fashion, each sensor has data registers where it reports
+ * its touch data and other interesting stuff. The size and layout of a
+ * sensors data registers must be determined by parsing its query registers.
+ * The data registers for sensor[n+1] immediately follow those for sensor[n],
+ * so you can only know the start address for the sensor[n+1] controls if you
+ * know the size (and location) of the sensor[n] controls.
+ *
+ * The short story is that we need to read and parse a lot of query
+ * registers in order to determine the attributes of a sensor[0]. Then
+ * we need to use that data to compute the size of the control and data
+ * registers for sensor[0]. Once we have that figured out, we can then do
+ * the same thing for each subsequent sensor.
+ *
+ * The end result is that we have a number of structs that aren't used to
+ * directly generate the input events, but their size, location and contents
+ * are critical to determining where the data we are interested in lives.
+ *
+ * At this time, the driver does not yet comprehend all possible F11
+ * configuration options, but it should be sufficient to cover 99% of RMI4 F11
+ * devices currently in the field.
+ */
+
+/**
+ * @rezero - writing 1 to this will cause the sensor to calibrate to the
+ * current capacitive state.
+ */
+struct f11_2d_commands {
+ bool rezero:1;
+ u8 reserved:7;
+} __attribute__((__packed__));
+
+/** This query is always present, and is on a per device basis. All other
+ * queries are on a per-sensor basis.
+ *
+ * @nbr_of_sensors - the number of 2D sensors on the touch device.
+ * @has_query9 - indicates the F11_2D_Query9 register exists.
+ * @has_query11 - indicates the F11_2D_Query11 register exists.
+ * @has_query12 - indicates the F11_2D_Query12 register exists.
+ */
+struct f11_2d_device_query {
+ u8 nbr_of_sensors:3;
+ bool has_query9:1;
+ bool has_query11:1;
+ bool has_query12:1;
+ bool has_query27:1;
+ bool has_query28:1;
+} __attribute__((__packed__));
+
+/** Query registers 1 through 4 are always present.
+ * @number_of_fingers - describes the maximum number of fingers the 2-D sensor
+ * supports.
+ * @has_rel - the sensor supports relative motion reporting.
+ * @has_abs - the sensor supports absolute poition reporting.
+ * @has_gestures - the sensor supports gesture reporting.
+ * @has_sensitivity_adjust - the sensor supports a global sensitivity
+ * adjustment.
+ * @configurable - the sensor supports various configuration options.
+ * @num_of_x_electrodes - the maximum number of electrodes the 2-D sensor
+ * supports on the X axis.
+ * @num_of_y_electrodes - the maximum number of electrodes the 2-D sensor
+ * supports on the Y axis.
+ * @max_electrodes - the total number of X and Y electrodes that may be
+ * configured.
+ */
+struct f11_2d_sensor_info {
+ /* query1 */
+ u8 number_of_fingers:3;
+ bool has_rel:1;
+ bool has_abs:1;
+ bool has_gestures:1;
+ bool has_sensitivity_adjust:1;
+ bool configurable:1;
+ /* query2 */
+ u8 num_of_x_electrodes:7;
+ u8 reserved_1:1;
+ /* query3 */
+ u8 num_of_y_electrodes:7;
+ u8 reserved_2:1;
+ /* query4 */
+ u8 max_electrodes:7;
+ u8 reserved_3:1;
+} __attribute__((__packed__));
+
+/** Query 5 - this is present if the has_abs bit is set.
+ *
+ * @abs_data_size - describes the format of data reported by the absolute
+ * data source. Only one format (the kind used here) is supported at this
+ * time.
+ * @has_anchored_finger - then the sensor supports the high-precision second
+ * finger tracking provided by the manual tracking and motion sensitivity
+ * options.
+ * @has_adjust_hyst - the difference between the finger release threshold and
+ * the touch threshold.
+ * @has_dribble - the sensor supports the generation of dribble interrupts,
+ * which may be enabled or disabled with the dribble control bit.
+ * @has_bending_correction - Bending related data registers 28 and 36, and
+ * control register 52..57 are present.
+ * @has_large_object_suppression - control register 58 and data register 28
+ * exist.
+ * @has_jitter_filter - query 13 and control 73..76 exist.
+ */
+struct f11_2d_abs_info {
+ u8 abs_data_size:2;
+ bool has_anchored_finger:1;
+ bool has_adj_hyst:1;
+ bool has_dribble:1;
+ bool has_bending_correction:1;
+ bool has_large_object_suppression:1;
+ bool has_jitter_filter:1;
+} __attribute__((__packed__));
+
+/** Gesture information queries 7 and 8 are present if has_gestures bit is set.
+ *
+ * @has_single_tap - a basic single-tap gesture is supported.
+ * @has_tap_n_hold - tap-and-hold gesture is supported.
+ * @has_double_tap - double-tap gesture is supported.
+ * @has_early_tap - early tap is supported and reported as soon as the finger
+ * lifts for any tap event that could be interpreted as either a single tap
+ * or as the first tap of a double-tap or tap-and-hold gesture.
+ * @has_flick - flick detection is supported.
+ * @has_press - press gesture reporting is supported.
+ * @has_pinch - pinch gesture detection is supported.
+ * @has_palm_det - the 2-D sensor notifies the host whenever a large conductive
+ * object such as a palm or a cheek touches the 2-D sensor.
+ * @has_rotate - rotation gesture detection is supported.
+ * @has_touch_shapes - TouchShapes are supported. A TouchShape is a fixed
+ * rectangular area on the sensor that behaves like a capacitive button.
+ * @has_scroll_zones - scrolling areas near the sensor edges are supported.
+ * @has_individual_scroll_zones - if 1, then 4 scroll zones are supported;
+ * if 0, then only two are supported.
+ * @has_multi_finger_scroll - the multifinger_scrolling bit will be set when
+ * more than one finger is involved in a scrolling action.
+ */
+struct f11_2d_gesture_info {
+ bool has_single_tap:1;
+ bool has_tap_n_hold:1;
+ bool has_double_tap:1;
+ bool has_early_tap:1;
+ bool has_flick:1;
+ bool has_press:1;
+ bool has_pinch:1;
+ bool has_chiral:1;
+
+ bool has_palm_det:1;
+ bool has_rotate:1;
+ bool has_touch_shapes:1;
+ bool has_scroll_zones:1;
+ bool has_individual_scroll_zones:1;
+ bool has_multi_finger_scroll:1;
+ bool has_mf_edge_motion:1;
+ bool has_mf_scroll_inertia:1;
+} __attribute__((__packed__));
+
+/** Utility for checking bytes in the gesture info registers. This is done
+ * often enough that we put it here to declutter the conditionals.
+ */
+static bool has_gesture_bits(const struct f11_2d_gesture_info *info,
+ const u8 byte) {
+ return ((u8 *) info)[byte] != 0;
+}
+
+/**
+ * @has_pen - detection of a stylus is supported and registers F11_2D_Ctrl20
+ * and F11_2D_Ctrl21 exist.
+ * @has_proximity - detection of fingers near the sensor is supported and
+ * registers F11_2D_Ctrl22 through F11_2D_Ctrl26 exist.
+ * @has_palm_det_sensitivity - the sensor supports the palm detect sensitivity
+ * feature and register F11_2D_Ctrl27 exists.
+ * @has_two_pen_thresholds - is has_pen is also set, then F11_2D_Ctrl35 exists.
+ * @has_contact_geometry - the sensor supports the use of contact geometry to
+ * map absolute X and Y target positions and registers F11_2D_Data18.* through
+ * F11_2D_Data27 exist.
+ */
+struct f11_2d_query9 {
+ bool has_pen:1;
+ bool has_proximity:1;
+ bool has_palm_det_sensitivity:1;
+ bool has_suppress_on_palm_detect:1;
+ bool has_two_pen_thresholds:1;
+ bool has_contact_geometry:1;
+ bool has_pen_hover_discrimination:1;
+ bool has_pen_filters:1;
+} __attribute__((__packed__));
+
+/** Touch shape info (query 10) is present if has_touch_shapes is set.
+ *
+ * @nbr_touch_shapes - the total number of touch shapes supported.
+ */
+struct f11_2d_ts_info {
+ u8 nbr_touch_shapes:5;
+ u8 reserved:3;
+} __attribute__((__packed__));
+
+/** Query 11 is present if the has_query11 bit is set in query 0.
+ *
+ * @has_z_tuning - if set, the sensor supports Z tuning and registers
+ * F11_2D_Ctrl29 through F11_2D_Ctrl33 exist.
+ * @has_algorithm_selection - controls choice of noise suppression algorithm
+ * @has_w_tuning - the sensor supports Wx and Wy scaling and registers
+ * F11_2D_Ctrl36 through F11_2D_Ctrl39 exist.
+ * @has_pitch_info - the X and Y pitches of the sensor electrodes can be
+ * configured and registers F11_2D_Ctrl40 and F11_2D_Ctrl41 exist.
+ * @has_finger_size - the default finger width settings for the
+ * sensor can be configured and registers F11_2D_Ctrl42 through F11_2D_Ctrl44
+ * exist.
+ * @has_segmentation_aggressiveness - the sensor’s ability to distinguish
+ * multiple objects close together can be configured and register F11_2D_Ctrl45
+ * exists.
+ * @has_XY_clip - the inactive outside borders of the sensor can be
+ * configured and registers F11_2D_Ctrl46 through F11_2D_Ctrl49 exist.
+ * @has_drumming_filter - the sensor can be configured to distinguish
+ * between a fast flick and a quick drumming movement and registers
+ * F11_2D_Ctrl50 and F11_2D_Ctrl51 exist.
+ */
+struct f11_2d_query11 {
+ bool has_z_tuning:1;
+ bool has_algorithm_selection:1;
+ bool has_w_tuning:1;
+ bool has_pitch_info:1;
+ bool has_finger_size:1;
+ bool has_segmentation_aggressiveness:1;
+ bool has_XY_clip:1;
+ bool has_drumming_filter:1;
+} __attribute__((__packed__));
+
+/**
+ * @has_gapless_finger - control registers relating to gapless finger are
+ * present.
+ * @has_gapless_finger_tuning - additional control and data registers relating
+ * to gapless finger are present.
+ * @has_8bit_w - larger W value reporting is supported.
+ * @has_adjustable_mapping - TBD
+ * @has_info2 - the general info query14 is present
+ * @has_physical_props - additional queries describing the physical properties
+ * of the sensor are present.
+ * @has_finger_limit - indicates that F11 Ctrl 80 exists.
+ * @has_linear_coeff - indicates that F11 Ctrl 81 exists.
+ */
+struct f11_2d_query12 {
+ bool has_gapless_finger:1;
+ bool has_gapless_finger_tuning:1;
+ bool has_8bit_w:1;
+ bool has_adjustable_mapping:1;
+ bool has_info2:1;
+ bool has_physical_props:1;
+ bool has_finger_limit:1;
+ bool has_linear_coeff_2:1;
+} __attribute__((__packed__));
+
+/** This register is present if Query 5's has_jitter_filter bit is set.
+ * @jitter_window_size - used by Design Studio 4.
+ * @jitter_filter_type - used by Design Studio 4.
+ */
+struct f11_2d_query13 {
+ u8 jtter_window_size:5;
+ u8 jitter_filter_type:2;
+ u8 reserved:1;
+} __attribute__((__packed__));
+
+/** This register is present if query 12's has_general_info2 flag is set.
+ *
+ * @light_control - Indicates what light/led control features are present, if
+ * any.
+ * @is_clear - if set, this is a clear sensor (indicating direct pointing
+ * application), otherwise it's opaque (indicating indirect pointing).
+ * @clickpad_props - specifies if this is a clickpad, and if so what sort of
+ * mechanism it uses
+ * @mouse_buttons - specifies the number of mouse buttons present (if any).
+ * @has_advanced_gestures - advanced driver gestures are supported.
+ */
+struct f11_2d_query14 {
+ u8 light_control:2;
+ bool is_clear:1;
+ u8 clickpad_props:2;
+ u8 mouse_buttons:2;
+ bool has_advanced_gestures:1;
+} __attribute__((__packed__));
+
+#define F11_LIGHT_CTL_NONE 0x00
+#define F11_LUXPAD 0x01
+#define F11_DUAL_MODE 0x02
+
+#define F11_NOT_CLICKPAD 0x00
+#define F11_HINGED_CLICKPAD 0x01
+#define F11_UNIFORM_CLICKPAD 0x02
+
+/** See notes above for information about specific query register sets.
+ */
+struct f11_2d_sensor_queries {
+ struct f11_2d_sensor_info info;
+
+ struct f11_2d_abs_info abs_info;
+
+ u8 f11_2d_query6;
+
+ struct f11_2d_gesture_info gesture_info;
+
+ struct f11_2d_query9 query9;
+
+ struct f11_2d_ts_info ts_info;
+
+ struct f11_2d_query11 features_1;
+
+ struct f11_2d_query12 features_2;
+
+ struct f11_2d_query13 jitter_filter;
+
+ struct f11_2d_query14 info_2;
+};
+
+/**
+ * @reporting_mode - controls how often finger position data is reported.
+ * @abs_pos_filt - when set, enables various noise and jitter filtering
+ * algorithms for absolute reports.
+ * @rel_pos_filt - when set, enables various noise and jitter filtering
+ * algorithms for relative reports.
+ * @rel_ballistics - enables ballistics processing for the relative finger
+ * motion on the 2-D sensor.
+ * @dribble - enables the dribbling feature.
+ * @report_beyond_clip - when this is set, fingers outside the active area
+ * specified by the x_clip and y_clip registers will be reported, but with
+ * reported finger position clipped to the edge of the active area.
+ * @palm_detect_thresh - the threshold at which a wide finger is considered a
+ * palm. A value of 0 inhibits palm detection.
+ * @motion_sensitivity - specifies the threshold an anchored finger must move
+ * before it is considered no longer anchored. High values mean more
+ * sensitivity.
+ * @man_track_en - for anchored finger tracking, whether the host (1) or the
+ * device (0) determines which finger is the tracked finger.
+ * @man_tracked_finger - when man_track_en is 1, specifies whether finger 0 or
+ * finger 1 is the tracked finger.
+ * @delta_x_threshold - 2-D position update interrupts are inhibited unless
+ * the finger moves more than a certain threshold distance along the X axis.
+ * @delta_y_threshold - 2-D position update interrupts are inhibited unless
+ * the finger moves more than a certain threshold distance along the Y axis.
+ * @velocity - When rel_ballistics is set, this register defines the
+ * velocity ballistic parameter applied to all relative motion events.
+ * @acceleration - When rel_ballistics is set, this register defines the
+ * acceleration ballistic parameter applied to all relative motion events.
+ * @sensor_max_x_pos - the maximum X coordinate reported by the sensor.
+ * @sensor_max_y_pos - the maximum Y coordinate reported by the sensor.
+ */
+struct f11_2d_ctrl0_9 {
+ /* F11_2D_Ctrl0 */
+ u8 reporting_mode:3;
+ bool abs_pos_filt:1;
+ bool rel_pos_filt:1;
+ bool rel_ballistics:1;
+ bool dribble:1;
+ bool report_beyond_clip:1;
+ /* F11_2D_Ctrl1 */
+ u8 palm_detect_thres:4;
+ u8 motion_sensitivity:2;
+ bool man_track_en:1;
+ bool man_tracked_finger:1;
+ /* F11_2D_Ctrl2 and 3 */
+ u8 delta_x_threshold:8;
+ u8 delta_y_threshold:8;
+ /* F11_2D_Ctrl4 and 5 */
+ u8 velocity:8;
+ u8 acceleration:8;
+ /* F11_2D_Ctrl6 thru 9 */
+ u16 sensor_max_x_pos:12;
+ u8 ctrl7_reserved:4;
+ u16 sensor_max_y_pos:12;
+ u8 ctrl9_reserved:4;
+} __attribute__((__packed__));
+
+/**
+ * @single_tap_int_enable - enable tap gesture recognition.
+ * @tap_n_hold_int_enable - enable tap-and-hold gesture recognition.
+ * @double_tap_int_enable - enable double-tap gesture recognition.
+ * @early_tap_int_enable - enable early tap notification.
+ * @flick_int_enable - enable flick detection.
+ * @press_int_enable - enable press gesture recognition.
+ * @pinch_int_enable - enable pinch detection.
+ */
+struct f11_2d_ctrl10 {
+ bool single_tap_int_enable:1;
+ bool tap_n_hold_int_enable:1;
+ bool double_tap_int_enable:1;
+ bool early_tap_int_enable:1;
+ bool flick_int_enable:1;
+ bool press_int_enable:1;
+ bool pinch_int_enable:1;
+ u8 reserved:1;
+} __attribute__((__packed__));
+
+/**
+ * @palm_detect_int_enable - enable palm detection feature.
+ * @rotate_int_enable - enable rotate gesture detection.
+ * @touch_shape_int_enable - enable the TouchShape feature.
+ * @scroll_zone_int_enable - enable scroll zone reporting.
+ * @multi_finger_scroll_int_enable - enable the multfinger scroll feature.
+ */
+struct f11_2d_ctrl11 {
+ bool palm_detect_int_enable:1;
+ bool rotate_int_enable:1;
+ bool touch_shape_int_enable:1;
+ bool scroll_zone_int_enable:1;
+ bool multi_finger_scroll_int_enable:1;
+ u8 reserved:3;
+} __attribute__((__packed__));
+
+/**
+ * @sens_adjustment - allows a host to alter the overall sensitivity of a
+ * 2-D sensor. A positive value in this register will make the sensor more
+ * sensitive than the factory defaults, and a negative value will make it
+ * less sensitive.
+ * @hyst_adjustment - increase the touch/no-touch hysteresis by 2 Z-units for
+ * each one unit increment in this setting.
+ */
+struct f11_2d_ctrl14 {
+ s8 sens_adjustment:5;
+ u8 hyst_adjustment:3;
+} __attribute__((__packed__));
+
+/**
+ * @max_tap_time - the maximum duration of a tap, in 10-millisecond units.
+ */
+struct f11_2d_ctrl15 {
+ u8 max_tap_time:8;
+} __attribute__((__packed__));
+
+/**
+ * @min_press_time - The minimum duration required for stationary finger(s) to
+ * generate a press gesture, in 10-millisecond units.
+ */
+struct f11_2d_ctrl16 {
+ u8 min_press_time:8;
+} __attribute__((__packed__));
+
+/**
+ * @max_tap_distance - Determines the maximum finger movement allowed during
+ * a tap, in 0.1-millimeter units.
+ */
+struct f11_2d_ctrl17 {
+ u8 max_tap_distance:8;
+} __attribute__((__packed__));
+
+/**
+ * @min_flick_distance - the minimum finger movement for a flick gesture,
+ * in 1-millimeter units.
+ * @min_flick_speed - the minimum finger speed for a flick gesture, in
+ * 10-millimeter/second units.
+ */
+struct f11_2d_ctrl18_19 {
+ u8 min_flick_distance:8;
+ u8 min_flick_speed:8;
+} __attribute__((__packed__));
+
+/**
+ * @pen_detect_enable - enable reporting of stylus activity.
+ * @pen_jitter_filter_enable - Setting this enables the stylus anti-jitter
+ * filter.
+ * @pen_z_threshold - This is the stylus-detection lower threshold. Smaller
+ * values result in higher sensitivity.
+ */
+struct f11_2d_ctrl20_21 {
+ bool pen_detect_enable:1;
+ bool pen_jitter_filter_enable:1;
+ u8 ctrl20_reserved:6;
+ u8 pen_z_threshold:8;
+} __attribute__((__packed__));
+
+/**
+ * These are not accessible through sysfs yet.
+ *
+ * @proximity_detect_int_en - enable proximity detection feature.
+ * @proximity_jitter_filter_en - enables an anti-jitter filter on proximity
+ * data.
+ * @proximity_detection_z_threshold - the threshold for finger-proximity
+ * detection.
+ * @proximity_delta_x_threshold - In reduced-reporting modes, this is the
+ * threshold for proximate-finger movement in the direction parallel to the
+ * X-axis.
+ * @proximity_delta_y_threshold - In reduced-reporting modes, this is the
+ * threshold for proximate-finger movement in the direction parallel to the
+ * Y-axis.
+ * * @proximity_delta_Z_threshold - In reduced-reporting modes, this is the
+ * threshold for proximate-finger movement in the direction parallel to the
+ * Z-axis.
+ */
+struct f11_2d_ctrl22_26 {
+ /* control 22 */
+ bool proximity_detect_int_en:1;
+ bool proximity_jitter_filter_en:1;
+ u8 f11_2d_ctrl6_b3__7:6;
+
+ /* control 23 */
+ u8 proximity_detection_z_threshold;
+
+ /* control 24 */
+ u8 proximity_delta_x_threshold;
+
+ /* control 25 */
+ u8 proximity_delta_y_threshold;
+
+ /* control 26 */
+ u8 proximity_delta_z_threshold;
+} __attribute__((__packed__));
+
+/**
+ * @palm_detecy_sensitivity - When this value is small, smaller objects will
+ * be identified as palms; when this value is large, only larger objects will
+ * be identified as palms. 0 represents the factory default.
+ * @suppress_on_palm_detect - when set, all F11 interrupts except palm_detect
+ * are suppressed while a palm is detected.
+ */
+struct f11_2d_ctrl27 {
+ s8 palm_detect_sensitivity:4;
+ bool suppress_on_palm_detect:1;
+ u8 f11_2d_ctrl27_b5__7:3;
+} __attribute__((__packed__));
+
+/**
+ * @multi_finger_scroll_mode - allows choice of multi-finger scroll mode and
+ * determines whether and how X or Y displacements are reported.
+ * @edge_motion_en - enables the edge_motion feature.
+ * @multi_finger_scroll_momentum - controls the length of time that scrolling
+ * continues after fingers have been lifted.
+ */
+struct f11_2d_ctrl28 {
+ u8 multi_finger_scroll_mode:2;
+ bool edge_motion_en:1;
+ bool f11_2d_ctrl28b_3:1;
+ u8 multi_finger_scroll_momentum:4;
+} __attribute__((__packed__));
+
+/**
+ * @z_touch_threshold - Specifies the finger-arrival Z threshold. Large values
+ * may cause smaller fingers to be rejected.
+ * @z_touch_hysteresis - Specifies the difference between the finger-arrival
+ * Z threshold and the finger-departure Z threshold.
+ */
+struct f11_2d_ctrl29_30 {
+ u8 z_touch_threshold;
+ u8 z_touch_hysteresis;
+} __attribute__((__packed__));
+
+
+struct f11_2d_ctrl {
+ struct f11_2d_ctrl0_9 *ctrl0_9;
+ u16 ctrl0_9_address;
+ struct f11_2d_ctrl10 *ctrl10;
+ struct f11_2d_ctrl11 *ctrl11;
+ u8 ctrl12_size;
+ struct f11_2d_ctrl14 *ctrl14;
+ struct f11_2d_ctrl15 *ctrl15;
+ struct f11_2d_ctrl16 *ctrl16;
+ struct f11_2d_ctrl17 *ctrl17;
+ struct f11_2d_ctrl18_19 *ctrl18_19;
+ struct f11_2d_ctrl20_21 *ctrl20_21;
+ struct f11_2d_ctrl22_26 *ctrl22_26;
+ struct f11_2d_ctrl27 *ctrl27;
+ struct f11_2d_ctrl28 *ctrl28;
+ struct f11_2d_ctrl29_30 *ctrl29_30;
+};
+
+/**
+ * @x_msb - top 8 bits of X finger position.
+ * @y_msb - top 8 bits of Y finger position.
+ * @x_lsb - bottom 4 bits of X finger position.
+ * @y_lsb - bottom 4 bits of Y finger position.
+ * @w_y - contact patch width along Y axis.
+ * @w_x - contact patch width along X axis.
+ * @z - finger Z value (proxy for pressure).
+ */
+struct f11_2d_data_1_5 {
+ u8 x_msb;
+ u8 y_msb;
+ u8 x_lsb:4;
+ u8 y_lsb:4;
+ u8 w_y:4;
+ u8 w_x:4;
+ u8 z;
+} __attribute__((__packed__));
+
+/**
+ * @delta_x - relative motion along X axis.
+ * @delta_y - relative motion along Y axis.
+ */
+struct f11_2d_data_6_7 {
+ s8 delta_x;
+ s8 delta_y;
+} __attribute__((__packed__));
+
+/**
+ * @single_tap - a single tap was recognized.
+ * @tap_and_hold - a tap-and-hold gesture was recognized.
+ * @double_tap - a double tap gesture was recognized.
+ * @early_tap - a tap gesture might be happening.
+ * @flick - a flick gesture was detected.
+ * @press - a press gesture was recognized.
+ * @pinch - a pinch gesture was detected.
+ */
+struct f11_2d_data_8 {
+ bool single_tap:1;
+ bool tap_and_hold:1;
+ bool double_tap:1;
+ bool early_tap:1;
+ bool flick:1;
+ bool press:1;
+ bool pinch:1;
+} __attribute__((__packed__));
+
+/**
+ * @palm_detect - a palm or other large object is in contact with the sensor.
+ * @rotate - a rotate gesture was detected.
+ * @shape - a TouchShape has been activated.
+ * @scrollzone - scrolling data is available.
+ * @finger_count - number of fingers involved in the reported gesture.
+ */
+struct f11_2d_data_9 {
+ bool palm_detect:1;
+ bool rotate:1;
+ bool shape:1;
+ bool scrollzone:1;
+ u8 finger_count:3;
+} __attribute__((__packed__));
+
+/**
+ * @pinch_motion - when a pinch gesture is detected, this is the change in
+ * distance between the two fingers since this register was last read.
+ */
+struct f11_2d_data_10 {
+ s8 pinch_motion;
+} __attribute__((__packed__));
+
+/**
+ * @x_flick_dist - when a flick gesture is detected, the distance of flick
+ * gesture in X direction.
+ * @y_flick_dist - when a flick gesture is detected, the distance of flick
+ * gesture in Y direction.
+ * @flick_time - the total time of the flick gesture, in 10ms units.
+ */
+struct f11_2d_data_10_12 {
+ s8 x_flick_dist;
+ s8 y_flick_dist;
+ u8 flick_time;
+} __attribute__((__packed__));
+
+/**
+ * @motion - when a rotate gesture is detected, the accumulated distance
+ * of the rotate motion. Clockwise motion is positive and counterclockwise
+ * motion is negative.
+ * @finger_separation - when a rotate gesture is detected, the distance
+ * between the fingers.
+ */
+struct f11_2d_data_11_12 {
+ s8 motion;
+ u8 finger_separation;
+} __attribute__((__packed__));
+
+/**
+ * @shape_n - a bitmask of the currently activate TouchShapes (if any).
+ */
+struct f11_2d_data_13 {
+ u8 shape_n;
+} __attribute__((__packed__));
+
+/**
+ * @horizontal - chiral scrolling distance in the X direction.
+ * @vertical - chiral scrolling distance in the Y direction.
+ */
+struct f11_2d_data_14_15 {
+ s8 horizontal;
+ s8 vertical;
+} __attribute__((__packed__));
+
+/**
+ * @x_low - scroll zone motion along the lower edge of the sensor.
+ * @y_right - scroll zone motion along the right edge of the sensor.
+ * @x_upper - scroll zone motion along the upper edge of the sensor.
+ * @y_left - scroll zone motion along the left edge of the sensor.
+ */
+struct f11_2d_data_14_17 {
+ s8 x_low;
+ s8 y_right;
+ s8 x_upper;
+ s8 y_left;
+} __attribute__((__packed__));
+
+struct f11_2d_data {
+ u8 *f_state;
+ const struct f11_2d_data_1_5 *abs_pos;
+ const struct f11_2d_data_6_7 *rel_pos;
+ const struct f11_2d_data_8 *gest_1;
+ const struct f11_2d_data_9 *gest_2;
+ const struct f11_2d_data_10 *pinch;
+ const struct f11_2d_data_10_12 *flick;
+ const struct f11_2d_data_11_12 *rotate;
+ const struct f11_2d_data_13 *shapes;
+ const struct f11_2d_data_14_15 *multi_scroll;
+ const struct f11_2d_data_14_17 *scroll_zones;
+};
+
+/**
+ * @axis_align - controls parameters that are useful in system prototyping
+ * and bring up.
+ * @sens_query - query registers for this particular sensor.
+ * @data - the data reported by this sensor, mapped into a collection of
+ * structs.
+ * @max_x - The maximum X coordinate that will be reported by this sensor.
+ * @max_y - The maximum Y coordinate that will be reported by this sensor.
+ * @nbr_fingers - How many fingers can this sensor report?
+ * @data_pkt - buffer for data reported by this sensor.
+ * @pkt_size - number of bytes in that buffer.
+ * @sensor_index - identifies this particular 2D touch sensor
+ * @type_a - some early RMI4 2D sensors do not reliably track the finger
+ * position when two fingers are on the device. When this is true, we
+ * assume we have one of those sensors and report events appropriately.
+ * @sensor_type - indicates whether we're touchscreen or touchpad.
+ * @input - input device for absolute pointing stream
+ * @mouse_input - input device for relative pointing stream.
+ * @input_phys - buffer for the absolute phys name for this sensor.
+ * @input_mouse_phys - buffer for the relative phys name for this sensor.
+ * @debugfs_flip - inverts one or both axes. Useful in prototyping new
+ * systems.
+ * @debugfs_flip - coordinate clipping range for one or both axes. Useful in
+ * prototyping new systems.
+ * @debugfs_delta_threshold - adjusts motion sensitivity for relative reports
+ * and (in reduced reporting mode) absolute reports. Useful in prototyping new
+ * systems.
+ * @debugfs_offset - offsets one or both axes. Useful in prototyping new
+ * systems.
+ * @debugfs_swap - swaps X and Y axes. Useful in prototyping new systems.
+ * @debugfs_type_a - forces type A behavior. Useful in bringing up old systems
+ * when you're not sure if you've got a Type A or Type B sensor.
+ */
+struct f11_2d_sensor {
+ struct rmi_f11_2d_axis_alignment axis_align;
+ struct f11_2d_sensor_queries sens_query;
+ struct f11_2d_data data;
+ u16 max_x;
+ u16 max_y;
+ u8 nbr_fingers;
+ u8 *data_pkt;
+ int pkt_size;
+ u8 sensor_index;
+ bool type_a;
+ enum rmi_f11_sensor_type sensor_type;
+ struct input_dev *input;
+ struct input_dev *mouse_input;
+ struct rmi_function_container *fc;
+ char input_phys[NAME_BUFFER_SIZE];
+ char input_phys_mouse[NAME_BUFFER_SIZE];
+
+#ifdef CONFIG_RMI4_DEBUG
+ struct dentry *debugfs_flip;
+ struct dentry *debugfs_clip;
+ struct dentry *debugfs_delta_threshold;
+ struct dentry *debugfs_offset;
+ struct dentry *debugfs_swap;
+ struct dentry *debugfs_type_a;
+#endif
+};
+
+/** Data pertaining to F11 in general. For per-sensor data, see struct
+ * f11_2d_sensor.
+ *
+ * @dev_query - F11 device specific query registers.
+ * @dev_controls - F11 device specific control registers.
+ * @dev_controls_mutex - lock for the control registers.
+ * @rezero_wait_ms - if nonzero, upon resume we will wait this many
+ * milliseconds before rezeroing the sensor(s). This is useful in systems with
+ * poor electrical behavior on resume, where the initial calibration of the
+ * sensor(s) coming out of sleep state may be bogus.
+ * @sensors - per sensor data structures.
+ * @debugfs_rezero_wait - allows control of the rezero_wait value. Useful
+ * during system prototyping.
+ */
+struct f11_data {
+ struct f11_2d_device_query dev_query;
+ struct f11_2d_ctrl dev_controls;
+ struct mutex dev_controls_mutex;
+ u16 rezero_wait_ms;
+ struct f11_2d_sensor sensors[F11_MAX_NUM_OF_SENSORS];
+
+#ifdef CONFIG_RMI4_DEBUG
+ struct dentry *debugfs_rezero_wait;
+#endif
+};
+
+enum finger_state_values {
+ F11_NO_FINGER = 0x00,
+ F11_PRESENT = 0x01,
+ F11_INACCURATE = 0x02,
+ F11_RESERVED = 0x03
+};
+
+static ssize_t f11_maxPos_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rmi_function_container *fc;
+ struct f11_data *data;
+
+ fc = to_rmi_function_container(dev);
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "%u %u\n",
+ data->sensors[0].max_x, data->sensors[0].max_y);
+}
+
+static ssize_t f11_relreport_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rmi_function_container *fc;
+ struct f11_data *instance_data;
+
+ fc = to_rmi_function_container(dev);
+ instance_data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n",
+ instance_data->
+ sensors[0].axis_align.rel_report_enabled);
+}
+
+static ssize_t f11_relreport_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct rmi_function_container *fc;
+ struct f11_data *instance_data;
+ unsigned int new_value;
+
+ fc = to_rmi_function_container(dev);
+ instance_data = fc->data;
+
+
+ if (sscanf(buf, "%u", &new_value) != 1)
+ return -EINVAL;
+ if (new_value > 1)
+ return -EINVAL;
+ instance_data->sensors[0].axis_align.rel_report_enabled = new_value;
+
+ return count;
+}
+
+static ssize_t f11_rezero_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_container *fc = NULL;
+ unsigned int rezero;
+ int retval = 0;
+
+ fc = to_rmi_function_container(dev);
+
+ if (sscanf(buf, "%u", &rezero) != 1)
+ return -EINVAL;
+ if (rezero > 1)
+ return -EINVAL;
+
+ /* Per spec, 0 has no effect, so we skip it entirely. */
+ if (rezero) {
+ /* Command register always reads as 0, so just use a local. */
+ struct f11_2d_commands commands = {
+ .rezero = true,
+ };
+
+ retval = rmi_write_block(fc->rmi_dev, fc->fd.command_base_addr,
+ &commands, sizeof(commands));
+ if (retval < 0) {
+ dev_err(dev, "%s: failed to issue rezero command, error = %d.",
+ __func__, retval);
+ return retval;
+ }
+ }
+
+ return count;
+}
+
+static struct device_attribute attrs[] = {
+ __ATTR(relreport, RMI_RW_ATTR, f11_relreport_show, f11_relreport_store),
+ __ATTR(maxPos, RMI_RO_ATTR, f11_maxPos_show, NULL),
+ __ATTR(rezero, RMI_WO_ATTR, NULL, f11_rezero_store)
+};
+
+#ifdef CONFIG_RMI4_DEBUG
+
+struct sensor_debugfs_data {
+ bool done;
+ struct f11_2d_sensor *sensor;
+};
+
+static int sensor_debug_open(struct inode *inodep, struct file *filp)
+{
+ struct sensor_debugfs_data *data;
+ struct f11_2d_sensor *sensor = inodep->i_private;
+
+ data = kzalloc(sizeof(struct sensor_debugfs_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->sensor = sensor;
+ filp->private_data = data;
+ return 0;
+}
+
+static int sensor_debug_release(struct inode *inodep, struct file *filp)
+{
+ kfree(filp->private_data);
+ return 0;
+}
+
+static ssize_t flip_read(struct file *filp, char __user *buffer, size_t size,
+ loff_t *offset) {
+ int retval;
+ char *local_buf;
+ struct sensor_debugfs_data *data = filp->private_data;
+
+ if (data->done)
+ return 0;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ data->done = 1;
+
+ retval = snprintf(local_buf, size, "%u %u\n",
+ data->sensor->axis_align.flip_x,
+ data->sensor->axis_align.flip_y);
+
+ if (retval <= 0 || copy_to_user(buffer, local_buf, retval))
+ retval = -EFAULT;
+ kfree(local_buf);
+
+ return retval;
+}
+
+static ssize_t flip_write(struct file *filp, const char __user *buffer,
+ size_t size, loff_t *offset) {
+ int retval;
+ char *local_buf;
+ unsigned int new_X;
+ unsigned int new_Y;
+ struct sensor_debugfs_data *data = filp->private_data;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ retval = copy_from_user(local_buf, buffer, size);
+ if (retval) {
+ kfree(local_buf);
+ return -EFAULT;
+ }
+
+ retval = sscanf(local_buf, "%u %u", &new_X, &new_Y);
+ kfree(local_buf);
+ if (retval != 2 || new_X > 1 || new_Y > 1)
+ return -EINVAL;
+
+ data->sensor->axis_align.flip_x = new_X;
+ data->sensor->axis_align.flip_y = new_Y;
+
+ return size;
+}
+
+static const struct file_operations flip_fops = {
+ .owner = THIS_MODULE,
+ .open = sensor_debug_open,
+ .release = sensor_debug_release,
+ .read = flip_read,
+ .write = flip_write,
+};
+
+static ssize_t delta_threshold_read(struct file *filp, char __user *buffer,
+ size_t size, loff_t *offset) {
+ int retval;
+ char *local_buf;
+ struct sensor_debugfs_data *data = filp->private_data;
+ struct f11_data *f11 = data->sensor->fc->data;
+ struct f11_2d_ctrl *ctrl = &f11->dev_controls;
+
+ if (data->done)
+ return 0;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ data->done = 1;
+
+ retval = snprintf(local_buf, size, "%u %u\n",
+ ctrl->ctrl0_9->delta_x_threshold,
+ ctrl->ctrl0_9->delta_y_threshold);
+
+ if (retval <= 0 || copy_to_user(buffer, local_buf, retval))
+ retval = -EFAULT;
+ kfree(local_buf);
+
+ return retval;
+
+}
+
+static ssize_t delta_threshold_write(struct file *filp,
+ const char __user *buffer, size_t size, loff_t *offset) {
+ int retval;
+ char *local_buf;
+ unsigned int new_X, new_Y;
+ u8 save_X, save_Y;
+ int rc;
+ struct sensor_debugfs_data *data = filp->private_data;
+ struct f11_data *f11 = data->sensor->fc->data;
+ struct f11_2d_ctrl *ctrl = &f11->dev_controls;
+ struct rmi_device *rmi_dev = data->sensor->fc->rmi_dev;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ retval = copy_from_user(local_buf, buffer, size);
+ if (retval) {
+ kfree(local_buf);
+ return -EFAULT;
+ }
+
+ retval = sscanf(local_buf, "%u %u", &new_X, &new_Y);
+ kfree(local_buf);
+ if (retval != 2 || new_X > 1 || new_Y > 1)
+ return -EINVAL;
+
+ save_X = ctrl->ctrl0_9->delta_x_threshold;
+ save_Y = ctrl->ctrl0_9->delta_y_threshold;
+
+ ctrl->ctrl0_9->delta_x_threshold = new_X;
+ ctrl->ctrl0_9->delta_y_threshold = new_Y;
+ rc = rmi_write_block(rmi_dev, ctrl->ctrl0_9_address,
+ ctrl->ctrl0_9, sizeof(*ctrl->ctrl0_9));
+ if (rc < 0) {
+ dev_warn(&data->sensor->fc->dev,
+ "Failed to write to delta_threshold. Code: %d.\n",
+ rc);
+ ctrl->ctrl0_9->delta_x_threshold = save_X;
+ ctrl->ctrl0_9->delta_y_threshold = save_Y;
+ }
+
+ return size;
+}
+
+static const struct file_operations delta_threshold_fops = {
+ .owner = THIS_MODULE,
+ .open = sensor_debug_open,
+ .release = sensor_debug_release,
+ .read = delta_threshold_read,
+ .write = delta_threshold_write,
+};
+
+static ssize_t offset_read(struct file *filp, char __user *buffer, size_t size,
+ loff_t *offset) {
+ int retval;
+ char *local_buf;
+ struct sensor_debugfs_data *data = filp->private_data;
+
+ if (data->done)
+ return 0;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ data->done = 1;
+
+ retval = snprintf(local_buf, size, "%u %u\n",
+ data->sensor->axis_align.offset_X,
+ data->sensor->axis_align.offset_Y);
+
+ if (retval <= 0 || copy_to_user(buffer, local_buf, retval))
+ retval = -EFAULT;
+ kfree(local_buf);
+
+ return retval;
+}
+
+static ssize_t offset_write(struct file *filp, const char __user *buffer,
+ size_t size, loff_t *offset)
+{
+ int retval;
+ char *local_buf;
+ int new_X;
+ int new_Y;
+ struct sensor_debugfs_data *data = filp->private_data;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ retval = copy_from_user(local_buf, buffer, size);
+ if (retval) {
+ kfree(local_buf);
+ return -EFAULT;
+ }
+ retval = sscanf(local_buf, "%u %u", &new_X, &new_Y);
+ kfree(local_buf);
+ if (retval != 2)
+ return -EINVAL;
+
+ data->sensor->axis_align.offset_X = new_X;
+ data->sensor->axis_align.offset_Y = new_Y;
+
+ return size;
+}
+
+static const struct file_operations offset_fops = {
+ .owner = THIS_MODULE,
+ .open = sensor_debug_open,
+ .release = sensor_debug_release,
+ .read = offset_read,
+ .write = offset_write,
+};
+
+static ssize_t clip_read(struct file *filp, char __user *buffer, size_t size,
+ loff_t *offset) {
+ int retval;
+ char *local_buf;
+ struct sensor_debugfs_data *data = filp->private_data;
+
+ if (data->done)
+ return 0;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ data->done = 1;
+
+ retval = snprintf(local_buf, size, "%u %u %u %u\n",
+ data->sensor->axis_align.clip_X_low,
+ data->sensor->axis_align.clip_X_high,
+ data->sensor->axis_align.clip_Y_low,
+ data->sensor->axis_align.clip_Y_high);
+
+ if (retval <= 0 || copy_to_user(buffer, local_buf, retval))
+ retval = -EFAULT;
+ kfree(local_buf);
+
+ return retval;
+}
+
+static ssize_t clip_write(struct file *filp, const char __user *buffer,
+ size_t size, loff_t *offset)
+{
+ int retval;
+ char *local_buf;
+ unsigned int new_X_low, new_X_high, new_Y_low, new_Y_high;
+ struct sensor_debugfs_data *data = filp->private_data;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ retval = copy_from_user(local_buf, buffer, size);
+ if (retval) {
+ kfree(local_buf);
+ return -EFAULT;
+ }
+
+ retval = sscanf(local_buf, "%u %u %u %u",
+ &new_X_low, &new_X_high, &new_Y_low, &new_Y_high);
+ kfree(local_buf);
+ if (retval != 4)
+ return -EINVAL;
+
+ if (new_X_low >= new_X_high || new_Y_low >= new_Y_high)
+ return -EINVAL;
+
+ data->sensor->axis_align.clip_X_low = new_X_low;
+ data->sensor->axis_align.clip_X_high = new_X_high;
+ data->sensor->axis_align.clip_Y_low = new_Y_low;
+ data->sensor->axis_align.clip_Y_high = new_Y_high;
+
+ return size;
+}
+
+static const struct file_operations clip_fops = {
+ .owner = THIS_MODULE,
+ .open = sensor_debug_open,
+ .release = sensor_debug_release,
+ .read = clip_read,
+ .write = clip_write,
+};
+
+static ssize_t swap_read(struct file *filp, char __user *buffer, size_t size,
+ loff_t *offset) {
+ int retval;
+ char *local_buf;
+ struct sensor_debugfs_data *data = filp->private_data;
+
+ if (data->done)
+ return 0;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ data->done = 1;
+
+ retval = snprintf(local_buf, size, "%u\n",
+ data->sensor->axis_align.swap_axes);
+
+ if (retval <= 0 || copy_to_user(buffer, local_buf, retval))
+ retval = -EFAULT;
+ kfree(local_buf);
+
+ return retval;
+}
+
+static ssize_t swap_write(struct file *filp, const char __user *buffer,
+ size_t size, loff_t *offset)
+{
+ int retval;
+ char *local_buf;
+ int new_value;
+ struct sensor_debugfs_data *data = filp->private_data;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ retval = copy_from_user(local_buf, buffer, size);
+ if (retval) {
+ kfree(local_buf);
+ return -EFAULT;
+ }
+ retval = sscanf(local_buf, "%u", &new_value);
+ kfree(local_buf);
+ if (retval != 1 || new_value > 1)
+ return -EINVAL;
+
+ data->sensor->axis_align.swap_axes = new_value;
+ return size;
+}
+
+static const struct file_operations swap_fops = {
+ .owner = THIS_MODULE,
+ .open = sensor_debug_open,
+ .release = sensor_debug_release,
+ .read = swap_read,
+ .write = swap_write,
+};
+
+static ssize_t type_a_read(struct file *filp, char __user *buffer, size_t size,
+ loff_t *offset) {
+ int retval;
+ char *local_buf;
+ struct sensor_debugfs_data *data = filp->private_data;
+
+ if (data->done)
+ return 0;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ data->done = 1;
+
+ retval = snprintf(local_buf, size, "%u\n",
+ data->sensor->type_a);
+
+ if (retval <= 0 || copy_to_user(buffer, local_buf, retval))
+ retval = -EFAULT;
+ kfree(local_buf);
+
+ return retval;
+}
+
+static ssize_t type_a_write(struct file *filp, const char __user *buffer,
+ size_t size, loff_t *offset)
+{
+ int retval;
+ char *local_buf;
+ int new_value;
+ struct sensor_debugfs_data *data = filp->private_data;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ retval = copy_from_user(local_buf, buffer, size);
+ if (retval) {
+ kfree(local_buf);
+ return -EFAULT;
+ }
+
+ retval = sscanf(local_buf, "%u", &new_value);
+ kfree(local_buf);
+ if (retval != 1 || new_value > 1)
+ return -EINVAL;
+
+ data->sensor->type_a = new_value;
+ return size;
+}
+
+static const struct file_operations type_a_fops = {
+ .owner = THIS_MODULE,
+ .open = sensor_debug_open,
+ .release = sensor_debug_release,
+ .read = type_a_read,
+ .write = type_a_write,
+};
+
+static int setup_sensor_debugfs(struct f11_2d_sensor *sensor)
+{
+ int retval = 0;
+ char fname[NAME_BUFFER_SIZE];
+ struct rmi_function_container *fc = sensor->fc;
+
+ if (!fc->debugfs_root)
+ return -ENODEV;
+
+ retval = snprintf(fname, NAME_BUFFER_SIZE, "flip.%d",
+ sensor->sensor_index);
+ sensor->debugfs_flip = debugfs_create_file(fname, RMI_RW_ATTR,
+ fc->debugfs_root, sensor, &flip_fops);
+ if (!sensor->debugfs_flip)
+ dev_warn(&fc->dev, "Failed to create debugfs %s.\n",
+ fname);
+
+ retval = snprintf(fname, NAME_BUFFER_SIZE, "clip.%d",
+ sensor->sensor_index);
+ sensor->debugfs_clip = debugfs_create_file(fname, RMI_RW_ATTR,
+ fc->debugfs_root, sensor, &clip_fops);
+ if (!sensor->debugfs_clip)
+ dev_warn(&fc->dev, "Failed to create debugfs %s.\n",
+ fname);
+
+ retval = snprintf(fname, NAME_BUFFER_SIZE, "delta_threshold.%d",
+ sensor->sensor_index);
+ sensor->debugfs_clip = debugfs_create_file(fname, RMI_RW_ATTR,
+ fc->debugfs_root, sensor,
+ &delta_threshold_fops);
+ if (!sensor->debugfs_delta_threshold)
+ dev_warn(&fc->dev, "Failed to create debugfs %s.\n",
+ fname);
+
+ retval = snprintf(fname, NAME_BUFFER_SIZE, "offset.%d",
+ sensor->sensor_index);
+ sensor->debugfs_offset = debugfs_create_file(fname, RMI_RW_ATTR,
+ fc->debugfs_root, sensor, &offset_fops);
+ if (!sensor->debugfs_offset)
+ dev_warn(&fc->dev, "Failed to create debugfs %s.\n",
+ fname);
+
+ retval = snprintf(fname, NAME_BUFFER_SIZE, "swap.%d",
+ sensor->sensor_index);
+ sensor->debugfs_swap = debugfs_create_file(fname, RMI_RW_ATTR,
+ fc->debugfs_root, sensor, &swap_fops);
+ if (!sensor->debugfs_swap)
+ dev_warn(&fc->dev, "Failed to create debugfs %s.\n",
+ fname);
+
+ retval = snprintf(fname, NAME_BUFFER_SIZE, "type_a.%d",
+ sensor->sensor_index);
+ sensor->debugfs_type_a = debugfs_create_file(fname, RMI_RW_ATTR,
+ fc->debugfs_root, sensor, &type_a_fops);
+ if (!sensor->debugfs_type_a)
+ dev_warn(&fc->dev, "Failed to create debugfs %s.\n",
+ fname);
+
+ return retval;
+}
+
+static void teardown_sensor_debugfs(struct f11_2d_sensor *sensor)
+{
+ if (sensor->debugfs_flip)
+ debugfs_remove(sensor->debugfs_flip);
+
+ if (sensor->debugfs_clip)
+ debugfs_remove(sensor->debugfs_clip);
+
+ if (sensor->debugfs_offset)
+ debugfs_remove(sensor->debugfs_offset);
+
+ if (sensor->debugfs_swap)
+ debugfs_remove(sensor->debugfs_swap);
+
+ if (sensor->debugfs_type_a)
+ debugfs_remove(sensor->debugfs_type_a);
+}
+
+struct f11_debugfs_data {
+ bool done;
+ struct rmi_function_container *fc;
+};
+
+static int f11_debug_open(struct inode *inodep, struct file *filp)
+{
+ struct f11_debugfs_data *data;
+ struct rmi_function_container *fc = inodep->i_private;
+
+ data = devm_kzalloc(&fc->dev, sizeof(struct f11_debugfs_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->fc = fc;
+ filp->private_data = data;
+ return 0;
+}
+
+static ssize_t rezero_wait_read(struct file *filp, char __user *buffer,
+ size_t size, loff_t *offset) {
+ int retval;
+ char *local_buf;
+ struct f11_debugfs_data *data = filp->private_data;
+ struct f11_data *f11 = data->fc->data;
+
+ if (data->done)
+ return 0;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ data->done = 1;
+
+ retval = snprintf(local_buf, size, "%u\n", f11->rezero_wait_ms);
+
+ if (retval <= 0 || copy_to_user(buffer, local_buf, retval))
+ retval = -EFAULT;
+ kfree(local_buf);
+
+ return retval;
+}
+
+static ssize_t rezero_wait_write(struct file *filp, const char __user *buffer,
+ size_t size, loff_t *offset)
+{
+ int retval;
+ char *local_buf;
+ int new_value;
+ struct f11_debugfs_data *data = filp->private_data;
+ struct f11_data *f11 = data->fc->data;
+
+ local_buf = kcalloc(size, sizeof(u8), GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+
+ retval = copy_from_user(local_buf, buffer, size);
+ if (retval) {
+ kfree(local_buf);
+ return -EFAULT;
+ }
+
+ retval = sscanf(local_buf, "%u", &new_value);
+ kfree(local_buf);
+ if (retval != 1 || new_value > 65535)
+ return -EINVAL;
+
+ f11->rezero_wait_ms = new_value;
+ return size;
+}
+
+static const struct file_operations rezero_wait_fops = {
+ .owner = THIS_MODULE,
+ .open = f11_debug_open,
+ .read = rezero_wait_read,
+ .write = rezero_wait_write,
+};
+
+static int setup_f11_debugfs(struct rmi_function_container *fc)
+{
+ struct f11_data *f11 = fc->data;
+
+ if (!fc->debugfs_root)
+ return -ENODEV;
+
+ f11->debugfs_rezero_wait = debugfs_create_file("rezero_wait",
+ RMI_RW_ATTR, fc->debugfs_root, fc, &rezero_wait_fops);
+ if (!f11->debugfs_rezero_wait)
+ dev_warn(&fc->dev,
+ "Failed to create debugfs rezero_wait.\n");
+
+ return 0;
+}
+
+static void teardown_f11_debugfs(struct f11_data *f11)
+{
+ if (f11->debugfs_rezero_wait)
+ debugfs_remove(f11->debugfs_rezero_wait);
+}
+#endif
+/* End adding debugfs */
+
+/** F11_INACCURATE state is overloaded to indicate pen present. */
+#define F11_PEN F11_INACCURATE
+
+static int get_tool_type(struct f11_2d_sensor *sensor, u8 finger_state)
+{
+ if (IS_ENABLED(CONFIG_RMI4_F11_PEN) &&
+ sensor->sens_query.query9.has_pen &&
+ finger_state == F11_PEN)
+ return MT_TOOL_PEN;
+ return MT_TOOL_FINGER;
+}
+
+static void rmi_f11_rel_pos_report(struct f11_2d_sensor *sensor, u8 n_finger)
+{
+ struct f11_2d_data *data = &sensor->data;
+ struct rmi_f11_2d_axis_alignment *axis_align = &sensor->axis_align;
+ s8 x, y;
+ s8 temp;
+
+ x = data->rel_pos[n_finger].delta_x;
+ y = data->rel_pos[n_finger].delta_y;
+
+ x = min(F11_REL_POS_MAX, max(F11_REL_POS_MIN, (int)x));
+ y = min(F11_REL_POS_MAX, max(F11_REL_POS_MIN, (int)y));
+
+ if (axis_align->swap_axes) {
+ temp = x;
+ x = y;
+ y = temp;
+ }
+ if (axis_align->flip_x)
+ x = min(F11_REL_POS_MAX, -x);
+ if (axis_align->flip_y)
+ y = min(F11_REL_POS_MAX, -y);
+
+ if (x || y) {
+ input_report_rel(sensor->input, REL_X, x);
+ input_report_rel(sensor->input, REL_Y, y);
+ input_report_rel(sensor->mouse_input, REL_X, x);
+ input_report_rel(sensor->mouse_input, REL_Y, y);
+ }
+ input_sync(sensor->mouse_input);
+}
+
+static void rmi_f11_abs_pos_report(struct f11_data *f11,
+ struct f11_2d_sensor *sensor,
+ u8 finger_state, u8 n_finger)
+{
+ struct f11_2d_data *data = &sensor->data;
+ struct rmi_f11_2d_axis_alignment *axis_align = &sensor->axis_align;
+ int x, y, z;
+ int w_x, w_y, w_max, w_min, orient;
+ int temp;
+
+ if (finger_state) {
+ x = ((data->abs_pos[n_finger].x_msb << 4) |
+ data->abs_pos[n_finger].x_lsb);
+ y = ((data->abs_pos[n_finger].y_msb << 4) |
+ data->abs_pos[n_finger].y_lsb);
+ z = data->abs_pos[n_finger].z;
+ w_x = data->abs_pos[n_finger].w_x;
+ w_y = data->abs_pos[n_finger].w_y;
+ w_max = max(w_x, w_y);
+ w_min = min(w_x, w_y);
+
+ if (axis_align->swap_axes) {
+ temp = x;
+ x = y;
+ y = temp;
+ temp = w_x;
+ w_x = w_y;
+ w_y = temp;
+ }
+
+ orient = w_x > w_y ? 1 : 0;
+
+ if (axis_align->flip_x)
+ x = max(sensor->max_x - x, 0);
+
+ if (axis_align->flip_y)
+ y = max(sensor->max_y - y, 0);
+
+ /*
+ * here checking if X offset or y offset are specified is
+ * redundant. We just add the offsets or, clip the values
+ *
+ * note: offsets need to be done before clipping occurs,
+ * or we could get funny values that are outside
+ * clipping boundaries.
+ */
+ x += axis_align->offset_X;
+ y += axis_align->offset_Y;
+ x = max(axis_align->clip_X_low, x);
+ y = max(axis_align->clip_Y_low, y);
+ if (axis_align->clip_X_high)
+ x = min(axis_align->clip_X_high, x);
+ if (axis_align->clip_Y_high)
+ y = min(axis_align->clip_Y_high, y);
+
+ }
+
+ /* Some UIs ignore W of zero, so we fudge it to 1 for pens. This
+ * only appears to be an issue when reporting pens, not plain old
+ * fingers. */
+ if (IS_ENABLED(CONFIG_RMI4_F11_PEN) &&
+ get_tool_type(sensor, finger_state) == MT_TOOL_PEN) {
+ w_max = max(1, w_max);
+ w_min = max(1, w_min);
+ }
+
+ if (sensor->type_a) {
+ input_report_abs(sensor->input, ABS_MT_TRACKING_ID, n_finger);
+ input_report_abs(sensor->input, ABS_MT_TOOL_TYPE,
+ get_tool_type(sensor, finger_state));
+ } else {
+ input_mt_slot(sensor->input, n_finger);
+ input_mt_report_slot_state(sensor->input,
+ get_tool_type(sensor, finger_state), finger_state);
+ }
+
+ if (finger_state) {
+ input_report_abs(sensor->input, ABS_MT_PRESSURE, z);
+ input_report_abs(sensor->input, ABS_MT_TOUCH_MAJOR, w_max);
+ input_report_abs(sensor->input, ABS_MT_TOUCH_MINOR, w_min);
+ input_report_abs(sensor->input, ABS_MT_ORIENTATION, orient);
+ input_report_abs(sensor->input, ABS_MT_POSITION_X, x);
+ input_report_abs(sensor->input, ABS_MT_POSITION_Y, y);
+ dev_dbg(&sensor->fc->dev,
+ "finger[%d]:%d - x:%d y:%d z:%d w_max:%d w_min:%d\n",
+ n_finger, finger_state, x, y, z, w_max, w_min);
+ }
+ /* MT sync between fingers */
+ if (sensor->type_a)
+ input_mt_sync(sensor->input);
+}
+
+static void rmi_f11_finger_handler(struct f11_data *f11,
+ struct f11_2d_sensor *sensor)
+{
+ const u8 *f_state = sensor->data.f_state;
+ u8 finger_state;
+ u8 finger_pressed_count;
+ u8 i;
+
+ for (i = 0, finger_pressed_count = 0; i < sensor->nbr_fingers; i++) {
+ /* Possible of having 4 fingers per f_statet register */
+ finger_state = (f_state[i / 4] >> (2 * (i % 4))) &
+ FINGER_STATE_MASK;
+ if (finger_state == F11_RESERVED) {
+ pr_err("%s: Invalid finger state[%d]:0x%02x.", __func__,
+ i, finger_state);
+ continue;
+ } else if ((finger_state == F11_PRESENT) ||
+ (finger_state == F11_INACCURATE)) {
+ finger_pressed_count++;
+ }
+
+ if (sensor->data.abs_pos)
+ rmi_f11_abs_pos_report(f11, sensor, finger_state, i);
+
+ if (sensor->data.rel_pos)
+ rmi_f11_rel_pos_report(sensor, i);
+ }
+ input_mt_sync(sensor->input);
+ input_sync(sensor->input);
+}
+
+static int f11_2d_construct_data(struct f11_2d_sensor *sensor)
+{
+ struct f11_2d_sensor_queries *query = &sensor->sens_query;
+ struct f11_2d_data *data = &sensor->data;
+ int i;
+
+ sensor->nbr_fingers = (query->info.number_of_fingers == 5 ? 10 :
+ query->info.number_of_fingers + 1);
+
+ sensor->pkt_size = DIV_ROUND_UP(sensor->nbr_fingers, 4);
+
+ if (query->info.has_abs)
+ sensor->pkt_size += (sensor->nbr_fingers * 5);
+
+ if (query->info.has_rel)
+ sensor->pkt_size += (sensor->nbr_fingers * 2);
+
+ /* Check if F11_2D_Query7 is non-zero */
+ if (has_gesture_bits(&query->gesture_info, 0))
+ sensor->pkt_size += sizeof(u8);
+
+ /* Check if F11_2D_Query7 or F11_2D_Query8 is non-zero */
+ if (has_gesture_bits(&query->gesture_info, 0) ||
+ has_gesture_bits(&query->gesture_info, 1))
+ sensor->pkt_size += sizeof(u8);
+
+ if (query->gesture_info.has_pinch || query->gesture_info.has_flick
+ || query->gesture_info.has_rotate) {
+ sensor->pkt_size += 3;
+ if (!query->gesture_info.has_flick)
+ sensor->pkt_size--;
+ if (!query->gesture_info.has_rotate)
+ sensor->pkt_size--;
+ }
+
+ if (query->gesture_info.has_touch_shapes)
+ sensor->pkt_size +=
+ DIV_ROUND_UP(query->ts_info.nbr_touch_shapes + 1, 8);
+
+ sensor->data_pkt = kzalloc(sensor->pkt_size, GFP_KERNEL);
+ if (!sensor->data_pkt)
+ return -ENOMEM;
+
+ data->f_state = sensor->data_pkt;
+ i = DIV_ROUND_UP(sensor->nbr_fingers, 4);
+
+ if (query->info.has_abs) {
+ data->abs_pos = (struct f11_2d_data_1_5 *)
+ &sensor->data_pkt[i];
+ i += (sensor->nbr_fingers * 5);
+ }
+
+ if (query->info.has_rel) {
+ data->rel_pos = (struct f11_2d_data_6_7 *)
+ &sensor->data_pkt[i];
+ i += (sensor->nbr_fingers * 2);
+ }
+
+ if (has_gesture_bits(&query->gesture_info, 0)) {
+ data->gest_1 = (struct f11_2d_data_8 *)&sensor->data_pkt[i];
+ i++;
+ }
+
+ if (has_gesture_bits(&query->gesture_info, 0) ||
+ has_gesture_bits(&query->gesture_info, 1)) {
+ data->gest_2 = (struct f11_2d_data_9 *)&sensor->data_pkt[i];
+ i++;
+ }
+
+ if (query->gesture_info.has_pinch) {
+ data->pinch = (struct f11_2d_data_10 *)&sensor->data_pkt[i];
+ i++;
+ }
+
+ if (query->gesture_info.has_flick) {
+ if (query->gesture_info.has_pinch) {
+ data->flick = (struct f11_2d_data_10_12 *)data->pinch;
+ i += 2;
+ } else {
+ data->flick = (struct f11_2d_data_10_12 *)
+ &sensor->data_pkt[i];
+ i += 3;
+ }
+ }
+
+ if (query->gesture_info.has_rotate) {
+ if (query->gesture_info.has_flick) {
+ data->rotate = (struct f11_2d_data_11_12 *)
+ (data->flick + 1);
+ } else {
+ data->rotate = (struct f11_2d_data_11_12 *)
+ &sensor->data_pkt[i];
+ i += 2;
+ }
+ }
+
+ if (query->gesture_info.has_touch_shapes)
+ data->shapes = (struct f11_2d_data_13 *)&sensor->data_pkt[i];
+
+ return 0;
+}
+
+static int f11_read_control_regs(struct rmi_function_container *fc,
+ struct f11_2d_ctrl *ctrl, u16 ctrl_base_addr) {
+ struct rmi_device *rmi_dev = fc->rmi_dev;
+ u16 read_address = ctrl_base_addr;
+ int error = 0;
+
+ ctrl->ctrl0_9_address = read_address;
+ error = rmi_read_block(rmi_dev, read_address, ctrl->ctrl0_9,
+ sizeof(*ctrl->ctrl0_9));
+ if (error < 0) {
+ dev_err(&fc->dev, "Failed to read ctrl0, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl0_9);
+
+ if (ctrl->ctrl10) {
+ error = rmi_read_block(rmi_dev, read_address,
+ ctrl->ctrl10, sizeof(*ctrl->ctrl10));
+ if (error < 0) {
+ dev_err(&fc->dev,
+ "Failed to read ctrl10, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl10);
+ }
+
+ if (ctrl->ctrl11) {
+ error = rmi_read_block(rmi_dev, read_address,
+ ctrl->ctrl11, sizeof(*ctrl->ctrl11));
+ if (error < 0) {
+ dev_err(&fc->dev,
+ "Failed to read ctrl11, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl11);
+ }
+
+ if (ctrl->ctrl14) {
+ error = rmi_read_block(rmi_dev, read_address,
+ ctrl->ctrl14, sizeof(*ctrl->ctrl14));
+ if (error < 0) {
+ dev_err(&fc->dev,
+ "Failed to read ctrl14, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl14);
+ }
+
+ if (ctrl->ctrl15) {
+ error = rmi_read_block(rmi_dev, read_address,
+ ctrl->ctrl15, sizeof(*ctrl->ctrl15));
+ if (error < 0) {
+ dev_err(&fc->dev,
+ "Failed to read ctrl15, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl15);
+ }
+
+ if (ctrl->ctrl16) {
+ error = rmi_read_block(rmi_dev, read_address,
+ ctrl->ctrl16, sizeof(*ctrl->ctrl16));
+ if (error < 0) {
+ dev_err(&fc->dev,
+ "Failed to read ctrl16, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl16);
+ }
+
+ if (ctrl->ctrl17) {
+ error = rmi_read_block(rmi_dev, read_address,
+ ctrl->ctrl17, sizeof(*ctrl->ctrl17));
+ if (error < 0) {
+ dev_err(&fc->dev,
+ "Failed to read ctrl17, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl17);
+ }
+
+ if (ctrl->ctrl18_19) {
+ error = rmi_read_block(rmi_dev, read_address,
+ ctrl->ctrl18_19, sizeof(*ctrl->ctrl18_19));
+ if (error < 0) {
+ dev_err(&fc->dev,
+ "Failed to read ctrl18_19, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl18_19);
+ }
+
+ if (ctrl->ctrl20_21) {
+ error = rmi_read_block(rmi_dev, read_address,
+ ctrl->ctrl20_21, sizeof(*ctrl->ctrl20_21));
+ if (error < 0) {
+ dev_err(&fc->dev,
+ "Failed to read ctrl20_21, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl20_21);
+ }
+
+ if (ctrl->ctrl22_26) {
+ error = rmi_read_block(rmi_dev, read_address,
+ ctrl->ctrl22_26, sizeof(*ctrl->ctrl22_26));
+ if (error < 0) {
+ dev_err(&fc->dev,
+ "Failed to read ctrl22_26, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl22_26);
+ }
+
+ if (ctrl->ctrl27) {
+ error = rmi_read_block(rmi_dev, read_address,
+ ctrl->ctrl27, sizeof(*ctrl->ctrl27));
+ if (error < 0) {
+ dev_err(&fc->dev,
+ "Failed to read ctrl27, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl27);
+ }
+
+ if (ctrl->ctrl28) {
+ error = rmi_read_block(rmi_dev, read_address,
+ ctrl->ctrl28, sizeof(*ctrl->ctrl28));
+ if (error < 0) {
+ dev_err(&fc->dev,
+ "Failed to read ctrl28, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl28);
+ }
+
+ if (ctrl->ctrl29_30) {
+ error = rmi_read_block(rmi_dev, read_address,
+ ctrl->ctrl29_30, sizeof(*ctrl->ctrl29_30));
+ if (error < 0) {
+ dev_err(&fc->dev,
+ "Failed to read ctrl29_30, code: %d.\n", error);
+ return error;
+ }
+ read_address += sizeof(*ctrl->ctrl29_30);
+ }
+ return 0;
+}
+
+static int f11_allocate_control_regs(struct rmi_function_container *fc,
+ struct f11_2d_device_query *device_query,
+ struct f11_2d_sensor_queries *sensor_query,
+ struct f11_2d_ctrl *ctrl,
+ u16 ctrl_base_addr) {
+
+ ctrl->ctrl0_9 = devm_kzalloc(&fc->dev, sizeof(struct f11_2d_ctrl0_9),
+ GFP_KERNEL);
+ if (!ctrl->ctrl0_9)
+ return -ENOMEM;
+ if (has_gesture_bits(&sensor_query->gesture_info, 0)) {
+ ctrl->ctrl10 = devm_kzalloc(&fc->dev,
+ sizeof(struct f11_2d_ctrl10), GFP_KERNEL);
+ if (!ctrl->ctrl10)
+ return -ENOMEM;
+ }
+
+ if (has_gesture_bits(&sensor_query->gesture_info, 1)) {
+ ctrl->ctrl11 = devm_kzalloc(&fc->dev,
+ sizeof(struct f11_2d_ctrl11), GFP_KERNEL);
+ if (!ctrl->ctrl11)
+ return -ENOMEM;
+ }
+
+ if (device_query->has_query9 && sensor_query->query9.has_pen) {
+ ctrl->ctrl20_21 = devm_kzalloc(&fc->dev,
+ sizeof(struct f11_2d_ctrl20_21), GFP_KERNEL);
+ if (!ctrl->ctrl20_21)
+ return -ENOMEM;
+ }
+
+ if (device_query->has_query9 && sensor_query->query9.has_proximity) {
+ ctrl->ctrl22_26 = devm_kzalloc(&fc->dev,
+ sizeof(struct f11_2d_ctrl22_26), GFP_KERNEL);
+ if (!ctrl->ctrl22_26)
+ return -ENOMEM;
+ }
+
+ if (device_query->has_query9 &&
+ (sensor_query->query9.has_palm_det_sensitivity ||
+ sensor_query->query9.has_suppress_on_palm_detect)) {
+ ctrl->ctrl27 = devm_kzalloc(&fc->dev,
+ sizeof(struct f11_2d_ctrl27), GFP_KERNEL);
+ if (!ctrl->ctrl27)
+ return -ENOMEM;
+ }
+
+ if (sensor_query->gesture_info.has_multi_finger_scroll) {
+ ctrl->ctrl28 = devm_kzalloc(&fc->dev,
+ sizeof(struct f11_2d_ctrl28), GFP_KERNEL);
+ if (!ctrl->ctrl28)
+ return -ENOMEM;
+ }
+
+ if (device_query->has_query11 &&
+ sensor_query->features_1.has_z_tuning) {
+ ctrl->ctrl29_30 = devm_kzalloc(&fc->dev,
+ sizeof(struct f11_2d_ctrl29_30), GFP_KERNEL);
+ if (!ctrl->ctrl29_30)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int f11_write_control_regs(struct rmi_function_container *fc,
+ struct f11_2d_sensor_queries *query,
+ struct f11_2d_ctrl *ctrl,
+ u16 ctrl_base_addr)
+{
+ struct rmi_device *rmi_dev = fc->rmi_dev;
+ u16 write_address = ctrl_base_addr;
+ int error;
+
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl0_9,
+ sizeof(*ctrl->ctrl0_9));
+ if (error < 0)
+ return error;
+ write_address += sizeof(ctrl->ctrl0_9);
+
+ if (ctrl->ctrl10) {
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl10, sizeof(*ctrl->ctrl10));
+ if (error < 0)
+ return error;
+ write_address++;
+ }
+
+ if (ctrl->ctrl11) {
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl11, sizeof(*ctrl->ctrl11));
+ if (error < 0)
+ return error;
+ write_address++;
+ }
+
+ if (ctrl->ctrl14) {
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl14, sizeof(ctrl->ctrl14));
+ if (error < 0)
+ return error;
+ write_address += sizeof(*ctrl->ctrl15);
+ }
+
+ if (ctrl->ctrl15) {
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl15, sizeof(*ctrl->ctrl15));
+ if (error < 0)
+ return error;
+ write_address += sizeof(*ctrl->ctrl15);
+ }
+
+ if (ctrl->ctrl16) {
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl16, sizeof(*ctrl->ctrl16));
+ if (error < 0)
+ return error;
+ write_address += sizeof(*ctrl->ctrl16);
+ }
+
+ if (ctrl->ctrl17) {
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl17, sizeof(*ctrl->ctrl17));
+ if (error < 0)
+ return error;
+ write_address += sizeof(*ctrl->ctrl17);
+ }
+
+ if (ctrl->ctrl18_19) {
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl18_19, sizeof(*ctrl->ctrl18_19));
+ if (error < 0)
+ return error;
+ write_address += sizeof(*ctrl->ctrl18_19);
+ }
+
+ if (ctrl->ctrl20_21) {
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl20_21, sizeof(*ctrl->ctrl20_21));
+ if (error < 0)
+ return error;
+ write_address += sizeof(*ctrl->ctrl20_21);
+ }
+
+ if (ctrl->ctrl22_26) {
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl22_26, sizeof(*ctrl->ctrl22_26));
+ if (error < 0)
+ return error;
+ write_address += sizeof(*ctrl->ctrl22_26);
+ }
+
+ if (ctrl->ctrl27) {
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl27, sizeof(*ctrl->ctrl27));
+ if (error < 0)
+ return error;
+ write_address += sizeof(*ctrl->ctrl27);
+ }
+
+ if (ctrl->ctrl28) {
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl28, sizeof(*ctrl->ctrl28));
+ if (error < 0)
+ return error;
+ write_address += sizeof(*ctrl->ctrl28);
+ }
+
+ if (ctrl->ctrl29_30) {
+ error = rmi_write_block(rmi_dev, write_address,
+ ctrl->ctrl29_30,
+ sizeof(struct f11_2d_ctrl29_30));
+ if (error < 0)
+ return error;
+ write_address += sizeof(struct f11_2d_ctrl29_30);
+ }
+
+ return 0;
+}
+
+static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev,
+ struct f11_2d_device_query *dev_query,
+ struct f11_2d_sensor_queries *sensor_query,
+ u16 query_base_addr)
+{
+ int query_size;
+ int rc;
+
+ rc = rmi_read_block(rmi_dev, query_base_addr,
+ &sensor_query->info, sizeof(sensor_query->info));
+ if (rc < 0)
+ return rc;
+ query_size = sizeof(sensor_query->info);
+
+ if (sensor_query->info.has_abs) {
+ rc = rmi_read(rmi_dev, query_base_addr + query_size,
+ &sensor_query->abs_info);
+ if (rc < 0)
+ return rc;
+ query_size++;
+ }
+
+ if (sensor_query->info.has_rel) {
+ rc = rmi_read(rmi_dev, query_base_addr + query_size,
+ &sensor_query->f11_2d_query6);
+ if (rc < 0)
+ return rc;
+ query_size++;
+ }
+
+ if (sensor_query->info.has_gestures) {
+ rc = rmi_read_block(rmi_dev, query_base_addr + query_size,
+ &sensor_query->gesture_info,
+ sizeof(sensor_query->gesture_info));
+ if (rc < 0)
+ return rc;
+ query_size += sizeof(sensor_query->gesture_info);
+ }
+
+ if (dev_query->has_query9) {
+ rc = rmi_read_block(rmi_dev, query_base_addr + query_size,
+ &sensor_query->query9,
+ sizeof(sensor_query->query9));
+ if (rc < 0)
+ return rc;
+ query_size += sizeof(sensor_query->query9);
+ }
+
+ if (sensor_query->gesture_info.has_touch_shapes) {
+ rc = rmi_read_block(rmi_dev, query_base_addr + query_size,
+ &sensor_query->ts_info,
+ sizeof(sensor_query->ts_info));
+ if (rc < 0)
+ return rc;
+ query_size += sizeof(sensor_query->ts_info);
+ }
+
+ if (dev_query->has_query11) {
+ rc = rmi_read_block(rmi_dev, query_base_addr + query_size,
+ &sensor_query->features_1,
+ sizeof(sensor_query->features_1));
+ if (rc < 0)
+ return rc;
+ query_size += sizeof(sensor_query->features_1);
+ }
+
+ if (dev_query->has_query12) {
+ rc = rmi_read_block(rmi_dev, query_base_addr + query_size,
+ &sensor_query->features_2,
+ sizeof(sensor_query->features_2));
+ if (rc < 0)
+ return rc;
+ query_size += sizeof(sensor_query->features_2);
+ }
+
+ if (sensor_query->abs_info.has_jitter_filter) {
+ rc = rmi_read_block(rmi_dev, query_base_addr + query_size,
+ &sensor_query->jitter_filter,
+ sizeof(sensor_query->jitter_filter));
+ if (rc < 0)
+ return rc;
+ query_size += sizeof(sensor_query->jitter_filter);
+ }
+
+ if (dev_query->has_query12 && sensor_query->features_2.has_info2) {
+ rc = rmi_read_block(rmi_dev, query_base_addr + query_size,
+ &sensor_query->info_2,
+ sizeof(sensor_query->info_2));
+ if (rc < 0)
+ return rc;
+ query_size += sizeof(sensor_query->info_2);
+ }
+
+ return query_size;
+}
+
+/* This operation is done in a number of places, so we have a handy routine
+ * for it.
+ */
+static void f11_set_abs_params(struct rmi_function_container *fc, int index)
+{
+ struct f11_data *f11 = fc->data;
+ struct f11_2d_sensor *sensor = &f11->sensors[index];
+ struct input_dev *input = sensor->input;
+ int device_x_max =
+ f11->dev_controls.ctrl0_9->sensor_max_x_pos;
+ int device_y_max =
+ f11->dev_controls.ctrl0_9->sensor_max_y_pos;
+ int x_min, x_max, y_min, y_max;
+ unsigned int input_flags;
+
+ /* We assume touchscreen unless demonstrably a touchpad or specified
+ * as a touchpad in the platform data
+ */
+ if (sensor->sensor_type == rmi_f11_sensor_touchpad ||
+ (sensor->sens_query.features_2.has_info2 &&
+ !sensor->sens_query.info_2.is_clear))
+ input_flags = INPUT_PROP_POINTER;
+ else
+ input_flags = INPUT_PROP_DIRECT;
+ set_bit(input_flags, input->propbit);
+
+ if (sensor->axis_align.swap_axes) {
+ int temp = device_x_max;
+ device_x_max = device_y_max;
+ device_y_max = temp;
+ }
+ /* Use the max X and max Y read from the device, or the clip values,
+ * whichever is stricter.
+ */
+ x_min = sensor->axis_align.clip_X_low;
+ if (sensor->axis_align.clip_X_high)
+ x_max = min((int) device_x_max,
+ sensor->axis_align.clip_X_high);
+ else
+ x_max = device_x_max;
+
+ y_min = sensor->axis_align.clip_Y_low;
+ if (sensor->axis_align.clip_Y_high)
+ y_max = min((int) device_y_max,
+ sensor->axis_align.clip_Y_high);
+ else
+ y_max = device_y_max;
+
+ dev_dbg(&fc->dev, "Set ranges X=[%d..%d] Y=[%d..%d].",
+ x_min, x_max, y_min, y_max);
+
+ input_set_abs_params(input, ABS_MT_PRESSURE, 0,
+ DEFAULT_MAX_ABS_MT_PRESSURE, 0, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MAJOR,
+ 0, DEFAULT_MAX_ABS_MT_TOUCH, 0, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MINOR,
+ 0, DEFAULT_MAX_ABS_MT_TOUCH, 0, 0);
+ input_set_abs_params(input, ABS_MT_ORIENTATION,
+ 0, DEFAULT_MAX_ABS_MT_ORIENTATION, 0, 0);
+ input_set_abs_params(input, ABS_MT_TRACKING_ID,
+ DEFAULT_MIN_ABS_MT_TRACKING_ID,
+ DEFAULT_MAX_ABS_MT_TRACKING_ID, 0, 0);
+ /* TODO get max_x_pos (and y) from control registers. */
+ input_set_abs_params(input, ABS_MT_POSITION_X,
+ x_min, x_max, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y,
+ y_min, y_max, 0, 0);
+ if (!sensor->type_a)
+ input_mt_init_slots(input, sensor->nbr_fingers, input_flags);
+ if (IS_ENABLED(CONFIG_RMI4_F11_PEN) &&
+ sensor->sens_query.query9.has_pen)
+ input_set_abs_params(input, ABS_MT_TOOL_TYPE,
+ 0, MT_TOOL_MAX, 0, 0);
+ else
+ input_set_abs_params(input, ABS_MT_TOOL_TYPE,
+ 0, MT_TOOL_FINGER, 0, 0);
+}
+
+static int rmi_f11_initialize(struct rmi_function_container *fc)
+{
+ struct rmi_device *rmi_dev = fc->rmi_dev;
+ struct f11_data *f11;
+ struct f11_2d_ctrl *ctrl;
+ u8 query_offset;
+ u16 query_base_addr;
+ u16 control_base_addr;
+ u16 max_x_pos, max_y_pos, temp;
+ int rc;
+ int i;
+ struct rmi_device_platform_data *pdata = to_rmi_platform_data(rmi_dev);
+
+ dev_dbg(&fc->dev, "Initializing F11 values for %s.\n",
+ pdata->sensor_name);
+
+ /*
+ ** init instance data, fill in values and create any sysfs files
+ */
+ f11 = devm_kzalloc(&fc->dev, sizeof(struct f11_data), GFP_KERNEL);
+ if (!f11)
+ return -ENOMEM;
+
+ fc->data = f11;
+ f11->rezero_wait_ms = pdata->f11_rezero_wait;
+
+ query_base_addr = fc->fd.query_base_addr;
+ control_base_addr = fc->fd.control_base_addr;
+
+ rc = rmi_read(rmi_dev, query_base_addr, &f11->dev_query);
+ if (rc < 0)
+ return rc;
+
+ query_offset = (query_base_addr + 1);
+ /* Increase with one since number of sensors is zero based */
+ for (i = 0; i < (f11->dev_query.nbr_of_sensors + 1); i++) {
+ struct f11_2d_sensor *sensor = &f11->sensors[i];
+ sensor->sensor_index = i;
+ sensor->fc = fc;
+
+ rc = rmi_f11_get_query_parameters(rmi_dev, &f11->dev_query,
+ &sensor->sens_query, query_offset);
+ if (rc < 0)
+ return rc;
+ query_offset += rc;
+
+ rc = f11_allocate_control_regs(fc,
+ &f11->dev_query, &sensor->sens_query,
+ &f11->dev_controls, control_base_addr);
+ if (rc < 0) {
+ dev_err(&fc->dev,
+ "Failed to allocate F11 control params.\n");
+ return rc;
+ }
+
+ rc = f11_read_control_regs(fc, &f11->dev_controls,
+ control_base_addr);
+ if (rc < 0) {
+ dev_err(&fc->dev,
+ "Failed to read F11 control params.\n");
+ return rc;
+ }
+
+ if (i < pdata->f11_sensor_count) {
+ sensor->axis_align =
+ pdata->f11_sensor_data[i].axis_align;
+ sensor->type_a = pdata->f11_sensor_data[i].type_a;
+ sensor->sensor_type =
+ pdata->f11_sensor_data[i].sensor_type;
+ }
+
+ rc = rmi_read_block(rmi_dev,
+ control_base_addr + F11_CTRL_SENSOR_MAX_X_POS_OFFSET,
+ (u8 *)&max_x_pos, sizeof(max_x_pos));
+ if (rc < 0)
+ return rc;
+
+ rc = rmi_read_block(rmi_dev,
+ control_base_addr + F11_CTRL_SENSOR_MAX_Y_POS_OFFSET,
+ (u8 *)&max_y_pos, sizeof(max_y_pos));
+ if (rc < 0)
+ return rc;
+
+ if (sensor->axis_align.swap_axes) {
+ temp = max_x_pos;
+ max_x_pos = max_y_pos;
+ max_y_pos = temp;
+ }
+ sensor->max_x = max_x_pos;
+ sensor->max_y = max_y_pos;
+
+ rc = f11_2d_construct_data(sensor);
+ if (rc < 0)
+ return rc;
+
+ ctrl = &f11->dev_controls;
+ if (sensor->axis_align.delta_x_threshold) {
+ ctrl->ctrl0_9->delta_x_threshold =
+ sensor->axis_align.delta_x_threshold;
+ rc = rmi_write_block(rmi_dev,
+ ctrl->ctrl0_9_address,
+ ctrl->ctrl0_9,
+ sizeof(*ctrl->ctrl0_9));
+ if (rc < 0)
+ dev_warn(&fc->dev, "Failed to write to delta_x_threshold %d. Code: %d.\n",
+ i, rc);
+
+ }
+
+ if (sensor->axis_align.delta_y_threshold) {
+ ctrl->ctrl0_9->delta_y_threshold =
+ sensor->axis_align.delta_y_threshold;
+ rc = rmi_write_block(rmi_dev,
+ ctrl->ctrl0_9_address,
+ ctrl->ctrl0_9,
+ sizeof(*ctrl->ctrl0_9));
+ if (rc < 0)
+ dev_warn(&fc->dev, "Failed to write to delta_y_threshold %d. Code: %d.\n",
+ i, rc);
+ }
+
+ if (IS_ENABLED(CONFIG_RMI4_DEBUG)) {
+ rc = setup_sensor_debugfs(sensor);
+ if (rc < 0)
+ dev_warn(&fc->dev, "Failed to setup debugfs for F11 sensor %d. Code: %d.\n",
+ i, rc);
+ }
+ }
+
+ if (IS_ENABLED(CONFIG_RMI4_DEBUG)) {
+ rc = setup_f11_debugfs(fc);
+ if (rc < 0)
+ dev_warn(&fc->dev, "Failed to setup debugfs for F11. Code: %d.\n",
+ rc);
+ }
+
+ mutex_init(&f11->dev_controls_mutex);
+ return 0;
+}
+
+static int rmi_f11_register_devices(struct rmi_function_container *fc)
+{
+ struct rmi_device *rmi_dev = fc->rmi_dev;
+ struct f11_data *f11 = fc->data;
+ struct input_dev *input_dev;
+ struct input_dev *input_dev_mouse;
+ struct rmi_driver_data *driver_data = dev_get_drvdata(&rmi_dev->dev);
+ struct rmi_driver *driver = rmi_dev->driver;
+ int sensors_itertd = 0;
+ int i;
+ int rc;
+ int board, version;
+
+ board = driver_data->board;
+ version = driver_data->rev;
+
+ for (i = 0; i < (f11->dev_query.nbr_of_sensors + 1); i++) {
+ struct f11_2d_sensor *sensor = &f11->sensors[i];
+ sensors_itertd = i;
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ rc = -ENOMEM;
+ goto error_unregister;
+ }
+
+ sensor->input = input_dev;
+ if (driver->set_input_params) {
+ rc = driver->set_input_params(rmi_dev, input_dev);
+ if (rc < 0) {
+ dev_err(&fc->dev,
+ "%s: Error in setting input device.\n",
+ __func__);
+ goto error_unregister;
+ }
+ }
+ sprintf(sensor->input_phys, "%s.abs%d/input0",
+ dev_name(&fc->dev), i);
+ input_dev->phys = sensor->input_phys;
+ input_dev->dev.parent = &rmi_dev->dev;
+ input_set_drvdata(input_dev, f11);
+
+ set_bit(EV_SYN, input_dev->evbit);
+ set_bit(EV_ABS, input_dev->evbit);
+ input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
+
+ f11_set_abs_params(fc, i);
+
+ if (sensor->sens_query.info.has_rel) {
+ set_bit(EV_REL, input_dev->evbit);
+ set_bit(REL_X, input_dev->relbit);
+ set_bit(REL_Y, input_dev->relbit);
+ }
+ rc = input_register_device(input_dev);
+ if (rc < 0) {
+ input_free_device(input_dev);
+ sensor->input = NULL;
+ goto error_unregister;
+ }
+
+ if (sensor->sens_query.info.has_rel) {
+ /*create input device for mouse events */
+ input_dev_mouse = input_allocate_device();
+ if (!input_dev_mouse) {
+ rc = -ENOMEM;
+ goto error_unregister;
+ }
+
+ sensor->mouse_input = input_dev_mouse;
+ if (driver->set_input_params) {
+ rc = driver->set_input_params(rmi_dev,
+ input_dev_mouse);
+ if (rc < 0) {
+ dev_err(&fc->dev,
+ "%s: Error in setting input device.\n",
+ __func__);
+ goto error_unregister;
+ }
+ }
+ sprintf(sensor->input_phys_mouse, "%s.rel%d/input0",
+ dev_name(&fc->dev), i);
+ set_bit(EV_REL, input_dev_mouse->evbit);
+ set_bit(REL_X, input_dev_mouse->relbit);
+ set_bit(REL_Y, input_dev_mouse->relbit);
+
+ set_bit(BTN_MOUSE, input_dev_mouse->evbit);
+ /* Register device's buttons and keys */
+ set_bit(EV_KEY, input_dev_mouse->evbit);
+ set_bit(BTN_LEFT, input_dev_mouse->keybit);
+ set_bit(BTN_MIDDLE, input_dev_mouse->keybit);
+ set_bit(BTN_RIGHT, input_dev_mouse->keybit);
+
+ rc = input_register_device(input_dev_mouse);
+ if (rc < 0) {
+ input_free_device(input_dev_mouse);
+ sensor->mouse_input = NULL;
+ goto error_unregister;
+ }
+
+ set_bit(BTN_RIGHT, input_dev_mouse->keybit);
+ }
+
+ }
+
+ return 0;
+
+error_unregister:
+ for (; sensors_itertd > 0; sensors_itertd--) {
+ if (f11->sensors[sensors_itertd].input) {
+ if (f11->sensors[sensors_itertd].mouse_input) {
+ input_unregister_device(
+ f11->sensors[sensors_itertd].mouse_input);
+ f11->sensors[sensors_itertd].mouse_input = NULL;
+ }
+ input_unregister_device(f11->sensors[i].input);
+ f11->sensors[i].input = NULL;
+ }
+ }
+
+ return rc;
+}
+
+static void rmi_f11_free_devices(struct rmi_function_container *fc)
+{
+ struct f11_data *f11 = fc->data;
+ int i;
+
+ for (i = 0; i < (f11->dev_query.nbr_of_sensors + 1); i++) {
+ if (f11->sensors[i].input)
+ input_unregister_device(f11->sensors[i].input);
+ if (f11->sensors[i].mouse_input)
+ input_unregister_device(f11->sensors[i].mouse_input);
+ }
+}
+
+static int rmi_f11_create_sysfs(struct rmi_function_container *fc)
+{
+ int attr_count = 0;
+ int rc;
+
+ for (attr_count = 0; attr_count < ARRAY_SIZE(attrs); attr_count++) {
+ if (sysfs_create_file
+ (&fc->dev.kobj, &attrs[attr_count].attr) < 0) {
+ dev_err(&fc->dev, "Failed to create sysfs file for %s.",
+ attrs[attr_count].attr.name);
+ rc = -ENODEV;
+ goto err_remove_sysfs;
+ }
+ }
+
+ return 0;
+
+err_remove_sysfs:
+ for (attr_count--; attr_count >= 0; attr_count--)
+ sysfs_remove_file(&fc->dev.kobj, &attrs[attr_count].attr);
+ return rc;
+}
+
+static int rmi_f11_config(struct rmi_function_container *fc)
+{
+ struct f11_data *f11 = fc->data;
+ int i;
+ int rc;
+
+ for (i = 0; i < (f11->dev_query.nbr_of_sensors + 1); i++) {
+ rc = f11_write_control_regs(fc, &f11->sensors[i].sens_query,
+ &f11->dev_controls, fc->fd.query_base_addr);
+ if (rc < 0)
+ return rc;
+ }
+
+ return 0;
+}
+
+int rmi_f11_attention(struct rmi_function_container *fc,
+ unsigned long *irq_bits)
+{
+ struct rmi_device *rmi_dev = fc->rmi_dev;
+ struct f11_data *f11 = fc->data;
+ u16 data_base_addr = fc->fd.data_base_addr;
+ u16 data_base_addr_offset = 0;
+ int error;
+ int i;
+
+ for (i = 0; i < f11->dev_query.nbr_of_sensors + 1; i++) {
+ error = rmi_read_block(rmi_dev,
+ data_base_addr + data_base_addr_offset,
+ f11->sensors[i].data_pkt,
+ f11->sensors[i].pkt_size);
+ if (error < 0)
+ return error;
+
+ rmi_f11_finger_handler(f11, &f11->sensors[i]);
+ data_base_addr_offset += f11->sensors[i].pkt_size;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int rmi_f11_resume(struct rmi_function_container *fc)
+{
+ struct rmi_device *rmi_dev = fc->rmi_dev;
+ struct f11_data *data = fc->data;
+ /* Command register always reads as 0, so we can just use a local. */
+ struct f11_2d_commands commands = {
+ .rezero = true,
+ };
+ int retval = 0;
+
+ dev_dbg(&fc->dev, "Resuming...\n");
+ if (!data->rezero_wait_ms)
+ return 0;
+
+ mdelay(data->rezero_wait_ms);
+
+ retval = rmi_write_block(rmi_dev, fc->fd.command_base_addr,
+ &commands, sizeof(commands));
+ if (retval < 0) {
+ dev_err(&fc->dev, "%s: failed to issue rezero command, error = %d.",
+ __func__, retval);
+ return retval;
+ }
+
+ return retval;
+}
+#endif /* CONFIG_PM */
+
+static int f11_remove_device(struct device *dev)
+{
+ int attr_count = 0;
+ struct f11_data *f11;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ f11 = fc->data;
+
+ if (IS_ENABLED(CONFIG_RMI4_DEBUG)) {
+ int i;
+
+ for (i = 0; i < f11->dev_query.nbr_of_sensors + 1; i++)
+ teardown_sensor_debugfs(&f11->sensors[i]);
+ teardown_f11_debugfs(f11);
+ }
+
+ for (attr_count = 0; attr_count < ARRAY_SIZE(attrs); attr_count++)
+ sysfs_remove_file(&fc->dev.kobj, &attrs[attr_count].attr);
+
+ rmi_f11_free_devices(fc);
+ return 0;
+}
+
+static int f11_device_init(struct rmi_function_container *fc)
+{
+ int rc;
+
+ rc = rmi_f11_initialize(fc);
+ if (rc < 0)
+ return rc;
+
+ rc = rmi_f11_register_devices(fc);
+ if (rc < 0)
+ return rc;
+
+ rc = rmi_f11_create_sysfs(fc);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
+static __devinit int f11_probe(struct device *dev)
+{
+ struct rmi_function_container *fc;
+
+ if (dev->type != &rmi_function_type)
+ return 1;
+
+ fc = to_rmi_function_container(dev);
+ if (fc->fd.function_number != FUNCTION_NUMBER)
+ return 1;
+
+ return f11_device_init(fc);
+}
+
+
+static struct rmi_function_handler function_handler = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "rmi_f11",
+ .bus = &rmi_bus_type,
+ .probe = f11_probe,
+ .remove = f11_remove_device,
+ },
+ .func = FUNCTION_NUMBER,
+ .config = rmi_f11_config,
+ .attention = rmi_f11_attention,
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ .late_resume = rmi_f11_resume
+#elif defined(CONFIG_PM)
+ .resume = rmi_f11_resume
+#endif /* defined(CONFIG_HAS_EARLYSUSPEND) */
+};
+
+static int __init rmi_f11_module_init(void)
+{
+ int error;
+
+ error = driver_register(&function_handler.driver);
+ if (error < 0) {
+ pr_err("%s: register driver failed!\n", __func__);
+ return error;
+ }
+
+ return 0;
+}
+
+static void __exit rmi_f11_module_exit(void)
+{
+ driver_unregister(&function_handler.driver);
+}
+
+module_init(rmi_f11_module_init);
+module_exit(rmi_f11_module_exit);
+
+MODULE_AUTHOR("Christopher Heiny <cheiny@synaptics.com");
+MODULE_DESCRIPTION("RMI F11 module");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(RMI_DRIVER_VERSION);
rmi_f11.c is a driver for 2D touch sensors using the RMI4 protocol. It supports both touchscreen and touchpad input, in both absolute and relative formats. Support for Type-B multitouch is the default, Type-A support is included for certain legacy sensors. Signed-off-by: Christopher Heiny <cheiny@synaptics.com> To: Henrik Rydberg <rydberg@euromail.se> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Cc: Joeri de Gram <j.de.gram@gmail.com> --- drivers/input/rmi4/rmi_f11.c | 2813 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 2813 insertions(+), 0 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html