| Message ID | 1353490282-10853-1-git-send-email-mkl@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Nov 21, 2012 at 15:01:22, Marc Kleine-Budde wrote: > From: AnilKumar Ch <anilkumar@ti.com> > > Add D_CAN raminit support to C_CAN driver to enable D_CAN RAM, > which holds all the message objects during transmission or > receiving of data. This initialization/de-initialization should > be done in synchronous with D_CAN clock. > > In case of AM335X-EVM (current user of D_CAN driver) message RAM is > controlled through control module register for both instances. So > control module register details is required to initialization or > de-initialization of message RAM according to instance number. > > Control module memory resource is obtained from D_CAN dt node and > instance number obtained from device tree aliases node. > > This patch was tested on AM335x-EVM along with pinctrl data addition > patch, d_can dt aliases addition and control module data addition. > pinctrl data addition is not added to am335x-evm.dts (only supports > CPLD profile#0) because d_can1 is supported under CPLD profile#1. > > Signed-off-by: AnilKumar Ch <anilkumar@ti.com> > [mkl: fix instance for non DT in probe, cleaned up raminit] > Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> > --- > Hello, > > compile time tested only - please test on real HW. Hi Marc, I tested this patch, its working. Thanks AnilKumar > > changes since v2 > - rename member in c_can_priv to raminit > (to be consistent with the rest of the driver) > - cleaned up c_can_hw_raminit() > - fix priv->instance for non DT platforms in c_can_plat_probe() > > regards, Marc > > drivers/net/can/c_can/c_can.c | 12 ++++++++++++ > drivers/net/can/c_can/c_can.h | 3 +++ > drivers/net/can/c_can/c_can_platform.c | 28 +++++++++++++++++++++++++++- > 3 files changed, 42 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c > index e5180df..5233b8f 100644 > --- a/drivers/net/can/c_can/c_can.c > +++ b/drivers/net/can/c_can/c_can.c > @@ -233,6 +233,12 @@ static inline void c_can_pm_runtime_put_sync(const struct c_can_priv *priv) > pm_runtime_put_sync(priv->device); > } > > +static inline void c_can_reset_ram(const struct c_can_priv *priv, bool enable) > +{ > + if (priv->raminit) > + priv->raminit(priv, enable); > +} > + > static inline int get_tx_next_msg_obj(const struct c_can_priv *priv) > { > return (priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) + > @@ -1090,6 +1096,7 @@ static int c_can_open(struct net_device *dev) > struct c_can_priv *priv = netdev_priv(dev); > > c_can_pm_runtime_get_sync(priv); > + c_can_reset_ram(priv, true); > > /* open the can device */ > err = open_candev(dev); > @@ -1118,6 +1125,7 @@ static int c_can_open(struct net_device *dev) > exit_irq_fail: > close_candev(dev); > exit_open_fail: > + c_can_reset_ram(priv, false); > c_can_pm_runtime_put_sync(priv); > return err; > } > @@ -1131,6 +1139,8 @@ static int c_can_close(struct net_device *dev) > c_can_stop(dev); > free_irq(dev->irq, dev); > close_candev(dev); > + > + c_can_reset_ram(priv, false); > c_can_pm_runtime_put_sync(priv); > > return 0; > @@ -1188,6 +1198,7 @@ int c_can_power_down(struct net_device *dev) > > c_can_stop(dev); > > + c_can_reset_ram(priv, false); > c_can_pm_runtime_put_sync(priv); > > return 0; > @@ -1206,6 +1217,7 @@ int c_can_power_up(struct net_device *dev) > WARN_ON(priv->type != BOSCH_D_CAN); > > c_can_pm_runtime_get_sync(priv); > + c_can_reset_ram(priv, true); > > /* Clear PDR and INIT bits */ > val = priv->read_reg(priv, C_CAN_CTRL_EX_REG); > diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h > index e5ed41d..d2e1c21 100644 > --- a/drivers/net/can/c_can/c_can.h > +++ b/drivers/net/can/c_can/c_can.h > @@ -169,6 +169,9 @@ struct c_can_priv { > void *priv; /* for board-specific data */ > u16 irqstatus; > enum c_can_dev_id type; > + u32 __iomem *raminit_ctrlreg; > + unsigned int instance; > + void (*raminit) (const struct c_can_priv *priv, bool enable); > }; > > struct net_device *alloc_c_can_dev(void); > diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c > index ee14161..75c3f47 100644 > --- a/drivers/net/can/c_can/c_can_platform.c > +++ b/drivers/net/can/c_can/c_can_platform.c > @@ -38,6 +38,8 @@ > > #include "c_can.h" > > +#define CAN_RAMINIT_START_MASK(i) (1 << (i)) > + > /* > * 16-bit c_can registers can be arranged differently in the memory > * architecture of different implementations. For example: 16-bit > @@ -68,6 +70,18 @@ static void c_can_plat_write_reg_aligned_to_32bit(struct c_can_priv *priv, > writew(val, priv->base + 2 * priv->regs[index]); > } > > +static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable) > +{ > + u32 val; > + > + val = readl(priv->raminit_ctrlreg); > + if (enable) > + val |= CAN_RAMINIT_START_MASK(priv->instance); > + else > + val &= ~CAN_RAMINIT_START_MASK(priv->instance); > + writel(val, priv->raminit_ctrlreg); > +} > + > static struct platform_device_id c_can_id_table[] = { > [BOSCH_C_CAN_PLATFORM] = { > .name = KBUILD_MODNAME, > @@ -99,7 +113,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) > const struct of_device_id *match; > const struct platform_device_id *id; > struct pinctrl *pinctrl; > - struct resource *mem; > + struct resource *mem, *res; > int irq; > struct clk *clk; > > @@ -178,6 +192,18 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) > priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; > priv->read_reg = c_can_plat_read_reg_aligned_to_16bit; > priv->write_reg = c_can_plat_write_reg_aligned_to_16bit; > + > + if (pdev->dev.of_node) > + priv->instance = of_alias_get_id(pdev->dev.of_node, "d_can"); > + else > + priv->instance = pdev->id; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); > + priv->raminit_ctrlreg = devm_request_and_ioremap(&pdev->dev, res); > + if (!priv->raminit_ctrlreg || priv->instance < 0) > + dev_info(&pdev->dev, "control memory is not used for raminit\n"); > + else > + priv->raminit = c_can_hw_raminit; > break; > default: > ret = -EINVAL; > -- > 1.7.10.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-can" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11/21/2012 11:07 AM, AnilKumar, Chimata wrote: > On Wed, Nov 21, 2012 at 15:01:22, Marc Kleine-Budde wrote: >> From: AnilKumar Ch <anilkumar@ti.com> >> >> Add D_CAN raminit support to C_CAN driver to enable D_CAN RAM, >> which holds all the message objects during transmission or >> receiving of data. This initialization/de-initialization should >> be done in synchronous with D_CAN clock. >> >> In case of AM335X-EVM (current user of D_CAN driver) message RAM is >> controlled through control module register for both instances. So >> control module register details is required to initialization or >> de-initialization of message RAM according to instance number. >> >> Control module memory resource is obtained from D_CAN dt node and >> instance number obtained from device tree aliases node. >> >> This patch was tested on AM335x-EVM along with pinctrl data addition >> patch, d_can dt aliases addition and control module data addition. >> pinctrl data addition is not added to am335x-evm.dts (only supports >> CPLD profile#0) because d_can1 is supported under CPLD profile#1. >> >> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> >> [mkl: fix instance for non DT in probe, cleaned up raminit] >> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> >> --- >> Hello, >> >> compile time tested only - please test on real HW. > > Hi Marc, > > I tested this patch, its working. Tnx, pushed to linux-can-next/master Marc
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index e5180df..5233b8f 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -233,6 +233,12 @@ static inline void c_can_pm_runtime_put_sync(const struct c_can_priv *priv) pm_runtime_put_sync(priv->device); } +static inline void c_can_reset_ram(const struct c_can_priv *priv, bool enable) +{ + if (priv->raminit) + priv->raminit(priv, enable); +} + static inline int get_tx_next_msg_obj(const struct c_can_priv *priv) { return (priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) + @@ -1090,6 +1096,7 @@ static int c_can_open(struct net_device *dev) struct c_can_priv *priv = netdev_priv(dev); c_can_pm_runtime_get_sync(priv); + c_can_reset_ram(priv, true); /* open the can device */ err = open_candev(dev); @@ -1118,6 +1125,7 @@ static int c_can_open(struct net_device *dev) exit_irq_fail: close_candev(dev); exit_open_fail: + c_can_reset_ram(priv, false); c_can_pm_runtime_put_sync(priv); return err; } @@ -1131,6 +1139,8 @@ static int c_can_close(struct net_device *dev) c_can_stop(dev); free_irq(dev->irq, dev); close_candev(dev); + + c_can_reset_ram(priv, false); c_can_pm_runtime_put_sync(priv); return 0; @@ -1188,6 +1198,7 @@ int c_can_power_down(struct net_device *dev) c_can_stop(dev); + c_can_reset_ram(priv, false); c_can_pm_runtime_put_sync(priv); return 0; @@ -1206,6 +1217,7 @@ int c_can_power_up(struct net_device *dev) WARN_ON(priv->type != BOSCH_D_CAN); c_can_pm_runtime_get_sync(priv); + c_can_reset_ram(priv, true); /* Clear PDR and INIT bits */ val = priv->read_reg(priv, C_CAN_CTRL_EX_REG); diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h index e5ed41d..d2e1c21 100644 --- a/drivers/net/can/c_can/c_can.h +++ b/drivers/net/can/c_can/c_can.h @@ -169,6 +169,9 @@ struct c_can_priv { void *priv; /* for board-specific data */ u16 irqstatus; enum c_can_dev_id type; + u32 __iomem *raminit_ctrlreg; + unsigned int instance; + void (*raminit) (const struct c_can_priv *priv, bool enable); }; struct net_device *alloc_c_can_dev(void); diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index ee14161..75c3f47 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -38,6 +38,8 @@ #include "c_can.h" +#define CAN_RAMINIT_START_MASK(i) (1 << (i)) + /* * 16-bit c_can registers can be arranged differently in the memory * architecture of different implementations. For example: 16-bit @@ -68,6 +70,18 @@ static void c_can_plat_write_reg_aligned_to_32bit(struct c_can_priv *priv, writew(val, priv->base + 2 * priv->regs[index]); } +static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable) +{ + u32 val; + + val = readl(priv->raminit_ctrlreg); + if (enable) + val |= CAN_RAMINIT_START_MASK(priv->instance); + else + val &= ~CAN_RAMINIT_START_MASK(priv->instance); + writel(val, priv->raminit_ctrlreg); +} + static struct platform_device_id c_can_id_table[] = { [BOSCH_C_CAN_PLATFORM] = { .name = KBUILD_MODNAME, @@ -99,7 +113,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) const struct of_device_id *match; const struct platform_device_id *id; struct pinctrl *pinctrl; - struct resource *mem; + struct resource *mem, *res; int irq; struct clk *clk; @@ -178,6 +192,18 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; priv->read_reg = c_can_plat_read_reg_aligned_to_16bit; priv->write_reg = c_can_plat_write_reg_aligned_to_16bit; + + if (pdev->dev.of_node) + priv->instance = of_alias_get_id(pdev->dev.of_node, "d_can"); + else + priv->instance = pdev->id; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + priv->raminit_ctrlreg = devm_request_and_ioremap(&pdev->dev, res); + if (!priv->raminit_ctrlreg || priv->instance < 0) + dev_info(&pdev->dev, "control memory is not used for raminit\n"); + else + priv->raminit = c_can_hw_raminit; break; default: ret = -EINVAL;