| Message ID | 1353498737-21174-1-git-send-email-anilkumar@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
>>>>> "A" == AnilKumar Ch <anilkumar@ti.com> writes: A> Rename I2C and GPIO nodes according to AM33XX TRM. According to A> AM33XX TRM device instances are starting from "0" like i2c0, i2c1 A> and i2c3. A> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> A> [panto@antoniou-consulting.com: initial patch by pantelis's] A> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Thanks! Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
On Wed, Nov 21, 2012 at 17:22:17, AnilKumar, Chimata wrote: > Rename I2C and GPIO nodes according to AM33XX TRM. According to > AM33XX TRM device instances are starting from "0" like i2c0, i2c1 > and i2c3. > > Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> > [panto@antoniou-consulting.com: initial patch by pantelis's] > Signed-off-by: AnilKumar Ch <anilkumar@ti.com> > --- > Changes from first version: > - Updated pantelis's patch > * Modified based on linux-omap/master > * Added GPIO nodes renaming as well Hi Tony/Benoit, If there are no comments could you please pull this patch? Thanks AnilKumar > arch/arm/boot/dts/am335x-bone.dts | 10 +++++----- > arch/arm/boot/dts/am335x-evm.dts | 18 +++++++++--------- > arch/arm/boot/dts/am335x-evmsk.dts | 18 +++++++++--------- > arch/arm/boot/dts/am33xx.dtsi | 14 +++++++------- > 4 files changed, 30 insertions(+), 30 deletions(-) > > diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts > index 2c33888..77b4352 100644 > --- a/arch/arm/boot/dts/am335x-bone.dts > +++ b/arch/arm/boot/dts/am335x-bone.dts > @@ -43,7 +43,7 @@ > status = "okay"; > }; > > - i2c1: i2c@44e0b000 { > + i2c0: i2c@44e0b000 { > status = "okay"; > clock-frequency = <400000>; > > @@ -59,27 +59,27 @@ > > led@2 { > label = "beaglebone:green:heartbeat"; > - gpios = <&gpio2 21 0>; > + gpios = <&gpio1 21 0>; > linux,default-trigger = "heartbeat"; > default-state = "off"; > }; > > led@3 { > label = "beaglebone:green:mmc0"; > - gpios = <&gpio2 22 0>; > + gpios = <&gpio1 22 0>; > linux,default-trigger = "mmc0"; > default-state = "off"; > }; > > led@4 { > label = "beaglebone:green:usr2"; > - gpios = <&gpio2 23 0>; > + gpios = <&gpio1 23 0>; > default-state = "off"; > }; > > led@5 { > label = "beaglebone:green:usr3"; > - gpios = <&gpio2 24 0>; > + gpios = <&gpio1 24 0>; > default-state = "off"; > }; > }; > diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts > index 9f65f17..705a9c5 100644 > --- a/arch/arm/boot/dts/am335x-evm.dts > +++ b/arch/arm/boot/dts/am335x-evm.dts > @@ -51,7 +51,7 @@ > status = "okay"; > }; > > - i2c1: i2c@44e0b000 { > + i2c0: i2c@44e0b000 { > status = "okay"; > clock-frequency = <400000>; > > @@ -60,7 +60,7 @@ > }; > }; > > - i2c2: i2c@4802a000 { > + i2c1: i2c@4802a000 { > status = "okay"; > clock-frequency = <100000>; > > @@ -123,12 +123,12 @@ > debounce-delay-ms = <5>; > col-scan-delay-us = <2>; > > - row-gpios = <&gpio2 25 0 /* Bank1, pin25 */ > - &gpio2 26 0 /* Bank1, pin26 */ > - &gpio2 27 0>; /* Bank1, pin27 */ > + row-gpios = <&gpio1 25 0 /* Bank1, pin25 */ > + &gpio1 26 0 /* Bank1, pin26 */ > + &gpio1 27 0>; /* Bank1, pin27 */ > > - col-gpios = <&gpio2 21 0 /* Bank1, pin21 */ > - &gpio2 22 0>; /* Bank1, pin22 */ > + col-gpios = <&gpio1 21 0 /* Bank1, pin21 */ > + &gpio1 22 0>; /* Bank1, pin22 */ > > linux,keymap = <0x0000008b /* MENU */ > 0x0100009e /* BACK */ > @@ -147,14 +147,14 @@ > switch@9 { > label = "volume-up"; > linux,code = <115>; > - gpios = <&gpio1 2 1>; > + gpios = <&gpio0 2 1>; > gpio-key,wakeup; > }; > > switch@10 { > label = "volume-down"; > linux,code = <114>; > - gpios = <&gpio1 3 1>; > + gpios = <&gpio0 3 1>; > gpio-key,wakeup; > }; > }; > diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts > index f5a6162..f67c360 100644 > --- a/arch/arm/boot/dts/am335x-evmsk.dts > +++ b/arch/arm/boot/dts/am335x-evmsk.dts > @@ -58,7 +58,7 @@ > status = "okay"; > }; > > - i2c1: i2c@44e0b000 { > + i2c0: i2c@44e0b000 { > status = "okay"; > clock-frequency = <400000>; > > @@ -115,26 +115,26 @@ > > led@1 { > label = "evmsk:green:usr0"; > - gpios = <&gpio2 4 0>; > + gpios = <&gpio1 4 0>; > default-state = "off"; > }; > > led@2 { > label = "evmsk:green:usr1"; > - gpios = <&gpio2 5 0>; > + gpios = <&gpio1 5 0>; > default-state = "off"; > }; > > led@3 { > label = "evmsk:green:mmc0"; > - gpios = <&gpio2 6 0>; > + gpios = <&gpio1 6 0>; > linux,default-trigger = "mmc0"; > default-state = "off"; > }; > > led@4 { > label = "evmsk:green:heartbeat"; > - gpios = <&gpio2 7 0>; > + gpios = <&gpio1 7 0>; > linux,default-trigger = "heartbeat"; > default-state = "off"; > }; > @@ -148,26 +148,26 @@ > switch@1 { > label = "button0"; > linux,code = <0x100>; > - gpios = <&gpio3 3 0>; > + gpios = <&gpio2 3 0>; > }; > > switch@2 { > label = "button1"; > linux,code = <0x101>; > - gpios = <&gpio3 2 0>; > + gpios = <&gpio2 2 0>; > }; > > switch@3 { > label = "button2"; > linux,code = <0x102>; > - gpios = <&gpio1 30 0>; > + gpios = <&gpio0 30 0>; > gpio-key,wakeup; > }; > > switch@4 { > label = "button3"; > linux,code = <0x103>; > - gpios = <&gpio3 5 0>; > + gpios = <&gpio2 5 0>; > }; > }; > }; > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > index 5dfd682..2ad01c7 100644 > --- a/arch/arm/boot/dts/am33xx.dtsi > +++ b/arch/arm/boot/dts/am33xx.dtsi > @@ -87,7 +87,7 @@ > reg = <0x48200000 0x1000>; > }; > > - gpio1: gpio@44e07000 { > + gpio0: gpio@44e07000 { > compatible = "ti,omap4-gpio"; > ti,hwmods = "gpio1"; > gpio-controller; > @@ -98,7 +98,7 @@ > interrupts = <96>; > }; > > - gpio2: gpio@4804c000 { > + gpio1: gpio@4804c000 { > compatible = "ti,omap4-gpio"; > ti,hwmods = "gpio2"; > gpio-controller; > @@ -109,7 +109,7 @@ > interrupts = <98>; > }; > > - gpio3: gpio@481ac000 { > + gpio2: gpio@481ac000 { > compatible = "ti,omap4-gpio"; > ti,hwmods = "gpio3"; > gpio-controller; > @@ -120,7 +120,7 @@ > interrupts = <32>; > }; > > - gpio4: gpio@481ae000 { > + gpio3: gpio@481ae000 { > compatible = "ti,omap4-gpio"; > ti,hwmods = "gpio4"; > gpio-controller; > @@ -185,7 +185,7 @@ > status = "disabled"; > }; > > - i2c1: i2c@44e0b000 { > + i2c0: i2c@44e0b000 { > compatible = "ti,omap4-i2c"; > #address-cells = <1>; > #size-cells = <0>; > @@ -195,7 +195,7 @@ > status = "disabled"; > }; > > - i2c2: i2c@4802a000 { > + i2c1: i2c@4802a000 { > compatible = "ti,omap4-i2c"; > #address-cells = <1>; > #size-cells = <0>; > @@ -205,7 +205,7 @@ > status = "disabled"; > }; > > - i2c3: i2c@4819c000 { > + i2c2: i2c@4819c000 { > compatible = "ti,omap4-i2c"; > #address-cells = <1>; > #size-cells = <0>; > -- > 1.7.9.5 > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>> "AnilKumar" == AnilKumar, Chimata <anilkumar@ti.com> writes: AnilKumar> On Wed, Nov 21, 2012 at 17:22:17, AnilKumar, Chimata wrote: >> Rename I2C and GPIO nodes according to AM33XX TRM. According to >> AM33XX TRM device instances are starting from "0" like i2c0, i2c1 >> and i2c3. >> >> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> >> [panto@antoniou-consulting.com: initial patch by pantelis's] >> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> >> --- >> Changes from first version: >> - Updated pantelis's patch >> * Modified based on linux-omap/master >> * Added GPIO nodes renaming as well AnilKumar> Hi Tony/Benoit, AnilKumar> If there are no comments could you please pull this patch? Yes, please do.
Hi Anil, On 01/02/2013 11:12 AM, AnilKumar, Chimata wrote: > On Wed, Nov 21, 2012 at 17:22:17, AnilKumar, Chimata wrote: >> Rename I2C and GPIO nodes according to AM33XX TRM. According to >> AM33XX TRM device instances are starting from "0" like i2c0, i2c1 >> and i2c3. >> >> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> >> [panto@antoniou-consulting.com: initial patch by pantelis's] >> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> >> --- >> Changes from first version: >> - Updated pantelis's patch >> * Modified based on linux-omap/master >> * Added GPIO nodes renaming as well > > Hi Tony/Benoit, > > If there are no comments could you please pull this patch? Yep, it is done. The patch is available here: git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.9/dts Regards, Benoit -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Benoit, On Jan 8, 2013, at 6:13 PM, Benoit Cousson wrote: > Hi Anil, > > On 01/02/2013 11:12 AM, AnilKumar, Chimata wrote: >> On Wed, Nov 21, 2012 at 17:22:17, AnilKumar, Chimata wrote: >>> Rename I2C and GPIO nodes according to AM33XX TRM. According to >>> AM33XX TRM device instances are starting from "0" like i2c0, i2c1 >>> and i2c3. >>> >>> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> >>> [panto@antoniou-consulting.com: initial patch by pantelis's] >>> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> >>> --- >>> Changes from first version: >>> - Updated pantelis's patch >>> * Modified based on linux-omap/master >>> * Added GPIO nodes renaming as well >> >> Hi Tony/Benoit, >> >> If there are no comments could you please pull this patch? > > Yep, it is done. > > The patch is available here: > git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.9/dts > > Regards, > Benoit > Note that when this lands in mainline, the DT patch bindings for DT overlays must be converted to the correct form. Regards -- Pantelis -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 2c33888..77b4352 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -43,7 +43,7 @@ status = "okay"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; @@ -59,27 +59,27 @@ led@2 { label = "beaglebone:green:heartbeat"; - gpios = <&gpio2 21 0>; + gpios = <&gpio1 21 0>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led@3 { label = "beaglebone:green:mmc0"; - gpios = <&gpio2 22 0>; + gpios = <&gpio1 22 0>; linux,default-trigger = "mmc0"; default-state = "off"; }; led@4 { label = "beaglebone:green:usr2"; - gpios = <&gpio2 23 0>; + gpios = <&gpio1 23 0>; default-state = "off"; }; led@5 { label = "beaglebone:green:usr3"; - gpios = <&gpio2 24 0>; + gpios = <&gpio1 24 0>; default-state = "off"; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 9f65f17..705a9c5 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -51,7 +51,7 @@ status = "okay"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; @@ -60,7 +60,7 @@ }; }; - i2c2: i2c@4802a000 { + i2c1: i2c@4802a000 { status = "okay"; clock-frequency = <100000>; @@ -123,12 +123,12 @@ debounce-delay-ms = <5>; col-scan-delay-us = <2>; - row-gpios = <&gpio2 25 0 /* Bank1, pin25 */ - &gpio2 26 0 /* Bank1, pin26 */ - &gpio2 27 0>; /* Bank1, pin27 */ + row-gpios = <&gpio1 25 0 /* Bank1, pin25 */ + &gpio1 26 0 /* Bank1, pin26 */ + &gpio1 27 0>; /* Bank1, pin27 */ - col-gpios = <&gpio2 21 0 /* Bank1, pin21 */ - &gpio2 22 0>; /* Bank1, pin22 */ + col-gpios = <&gpio1 21 0 /* Bank1, pin21 */ + &gpio1 22 0>; /* Bank1, pin22 */ linux,keymap = <0x0000008b /* MENU */ 0x0100009e /* BACK */ @@ -147,14 +147,14 @@ switch@9 { label = "volume-up"; linux,code = <115>; - gpios = <&gpio1 2 1>; + gpios = <&gpio0 2 1>; gpio-key,wakeup; }; switch@10 { label = "volume-down"; linux,code = <114>; - gpios = <&gpio1 3 1>; + gpios = <&gpio0 3 1>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index f5a6162..f67c360 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -58,7 +58,7 @@ status = "okay"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; @@ -115,26 +115,26 @@ led@1 { label = "evmsk:green:usr0"; - gpios = <&gpio2 4 0>; + gpios = <&gpio1 4 0>; default-state = "off"; }; led@2 { label = "evmsk:green:usr1"; - gpios = <&gpio2 5 0>; + gpios = <&gpio1 5 0>; default-state = "off"; }; led@3 { label = "evmsk:green:mmc0"; - gpios = <&gpio2 6 0>; + gpios = <&gpio1 6 0>; linux,default-trigger = "mmc0"; default-state = "off"; }; led@4 { label = "evmsk:green:heartbeat"; - gpios = <&gpio2 7 0>; + gpios = <&gpio1 7 0>; linux,default-trigger = "heartbeat"; default-state = "off"; }; @@ -148,26 +148,26 @@ switch@1 { label = "button0"; linux,code = <0x100>; - gpios = <&gpio3 3 0>; + gpios = <&gpio2 3 0>; }; switch@2 { label = "button1"; linux,code = <0x101>; - gpios = <&gpio3 2 0>; + gpios = <&gpio2 2 0>; }; switch@3 { label = "button2"; linux,code = <0x102>; - gpios = <&gpio1 30 0>; + gpios = <&gpio0 30 0>; gpio-key,wakeup; }; switch@4 { label = "button3"; linux,code = <0x103>; - gpios = <&gpio3 5 0>; + gpios = <&gpio2 5 0>; }; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 5dfd682..2ad01c7 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -87,7 +87,7 @@ reg = <0x48200000 0x1000>; }; - gpio1: gpio@44e07000 { + gpio0: gpio@44e07000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; gpio-controller; @@ -98,7 +98,7 @@ interrupts = <96>; }; - gpio2: gpio@4804c000 { + gpio1: gpio@4804c000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; @@ -109,7 +109,7 @@ interrupts = <98>; }; - gpio3: gpio@481ac000 { + gpio2: gpio@481ac000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; @@ -120,7 +120,7 @@ interrupts = <32>; }; - gpio4: gpio@481ae000 { + gpio3: gpio@481ae000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; @@ -185,7 +185,7 @@ status = "disabled"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -195,7 +195,7 @@ status = "disabled"; }; - i2c2: i2c@4802a000 { + i2c1: i2c@4802a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -205,7 +205,7 @@ status = "disabled"; }; - i2c3: i2c@4819c000 { + i2c2: i2c@4819c000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>;