| Message ID | 20121209012339.19716.10548.stgit@dusk.lan (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Minor comment below, On 12/9/2012 6:53 AM, Paul Walmsley wrote: > Move omap_set_pwrdm_state() from the PM code to the powerdomain code, > and refactor it to split it up into several functions. A subsequent patch > will rename it to conform with the existing powerdomain function names. > > Signed-off-by: Paul Walmsley <paul@pwsan.com> > Cc: Jean Pihet <jean.pihet@newoldbits.com> > Cc: Kevin Hilman <khilman@deeprootsystems.com> > --- > arch/arm/mach-omap2/pm.c | 61 -------------------- > arch/arm/mach-omap2/pm.h | 1 > arch/arm/mach-omap2/powerdomain.c | 112 +++++++++++++++++++++++++++---------- > arch/arm/mach-omap2/powerdomain.h | 3 + > 4 files changed, 85 insertions(+), 92 deletions(-) > > diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c > index cc8ed0f..2e2a897 100644 > --- a/arch/arm/mach-omap2/pm.c > +++ b/arch/arm/mach-omap2/pm.c > @@ -76,10 +76,6 @@ static void __init omap2_init_processor_devices(void) > } > } > > -/* Types of sleep_switch used in omap_set_pwrdm_state */ > -#define FORCEWAKEUP_SWITCH 0 > -#define LOWPOWERSTATE_SWITCH 1 > - > int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) > { > if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) && > @@ -92,63 +88,6 @@ int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) > } > > /* > - * This sets pwrdm state (other than mpu & core. Currently only ON & > - * RET are supported. > - */ > -int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 pwrst) > -{ > - u8 curr_pwrst, next_pwrst; > - int sleep_switch = -1, ret = 0, hwsup = 0; > - > - if (!pwrdm || IS_ERR(pwrdm)) You can use IS_ERR_OR_NULL here. Thanks, Vaibhav > - return -EINVAL; > - > - while (!(pwrdm->pwrsts & (1 << pwrst))) { > - if (pwrst == PWRDM_POWER_OFF) > - return ret; > - pwrst--; > - } > - > - next_pwrst = pwrdm_read_next_pwrst(pwrdm); > - if (next_pwrst == pwrst) > - return ret; > - > - curr_pwrst = pwrdm_read_pwrst(pwrdm); > - if (curr_pwrst < PWRDM_POWER_ON) { > - if ((curr_pwrst > pwrst) && > - (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) { > - sleep_switch = LOWPOWERSTATE_SWITCH; > - } else { > - hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); > - clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); > - sleep_switch = FORCEWAKEUP_SWITCH; > - } > - } > - > - ret = pwrdm_set_next_pwrst(pwrdm, pwrst); > - if (ret) > - pr_err("%s: unable to set power state of powerdomain: %s\n", > - __func__, pwrdm->name); > - > - switch (sleep_switch) { > - case FORCEWAKEUP_SWITCH: > - if (hwsup) > - clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); > - else > - clkdm_sleep(pwrdm->pwrdm_clkdms[0]); > - break; > - case LOWPOWERSTATE_SWITCH: > - pwrdm_set_lowpwrstchange(pwrdm); > - pwrdm_state_switch(pwrdm); > - break; > - } > - > - return ret; > -} > - > - > - > -/* > * This API is to be called during init to set the various voltage > * domains to the voltage as per the opp table. Typically we boot up > * at the nominal voltage. So this function finds out the rate of > diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h > index 686137d..707e9cb 100644 > --- a/arch/arm/mach-omap2/pm.h > +++ b/arch/arm/mach-omap2/pm.h > @@ -33,7 +33,6 @@ static inline int omap4_idle_init(void) > extern void *omap3_secure_ram_storage; > extern void omap3_pm_off_mode_enable(int); > extern void omap_sram_idle(void); > -extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); > extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); > extern int (*omap_pm_suspend)(void); > > diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c > index 97b3881..05f00660 100644 > --- a/arch/arm/mach-omap2/powerdomain.c > +++ b/arch/arm/mach-omap2/powerdomain.c > @@ -921,35 +921,6 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm) > return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0; > } > > -/** > - * pwrdm_set_lowpwrstchange - Request a low power state change > - * @pwrdm: struct powerdomain * > - * > - * Allows a powerdomain to transtion to a lower power sleep state > - * from an existing sleep state without waking up the powerdomain. > - * Returns -EINVAL if the powerdomain pointer is null or if the > - * powerdomain does not support LOWPOWERSTATECHANGE, or returns 0 > - * upon success. > - */ > -int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) > -{ > - int ret = -EINVAL; > - > - if (!pwrdm) > - return -EINVAL; > - > - if (!(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) > - return -EINVAL; > - > - pr_debug("powerdomain: %s: setting LOWPOWERSTATECHANGE bit\n", > - pwrdm->name); > - > - if (arch_pwrdm && arch_pwrdm->pwrdm_set_lowpwrstchange) > - ret = arch_pwrdm->pwrdm_set_lowpwrstchange(pwrdm); > - > - return ret; > -} > - > int pwrdm_state_switch(struct powerdomain *pwrdm) > { > int ret; > @@ -984,6 +955,89 @@ int pwrdm_post_transition(struct powerdomain *pwrdm) > return 0; > } > > +/* Types of sleep_switch used in omap_set_pwrdm_state */ > +#define ALREADYACTIVE_SWITCH 0 > +#define FORCEWAKEUP_SWITCH 1 > +#define LOWPOWERSTATE_SWITCH 2 > + > +static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, > + u8 pwrst, bool *hwsup) > +{ > + u8 curr_pwrst, sleep_switch; > + > + curr_pwrst = pwrdm_read_pwrst(pwrdm); > + if (curr_pwrst < PWRDM_POWER_ON) { > + if (curr_pwrst > pwrst && > + pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && > + arch_pwrdm->pwrdm_set_lowpwrstchange) { > + sleep_switch = LOWPOWERSTATE_SWITCH; > + } else { > + *hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); > + clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); > + sleep_switch = FORCEWAKEUP_SWITCH; > + } > + } else { > + sleep_switch = ALREADYACTIVE_SWITCH; > + } > + > + return sleep_switch; > +} > + > +static void _pwrdm_restore_clkdm_state(struct powerdomain *pwrdm, > + u8 sleep_switch, bool hwsup) > +{ > + switch (sleep_switch) { > + case FORCEWAKEUP_SWITCH: > + if (hwsup) > + clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); > + else > + clkdm_sleep(pwrdm->pwrdm_clkdms[0]); > + break; > + case LOWPOWERSTATE_SWITCH: > + if (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && > + arch_pwrdm->pwrdm_set_lowpwrstchange) > + arch_pwrdm->pwrdm_set_lowpwrstchange(pwrdm); > + pwrdm_state_switch(pwrdm); > + break; > + } > +} > + > +/* > + * This sets pwrdm state (other than mpu & core. Currently only ON & > + * RET are supported. > + */ > +int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) > +{ > + u8 next_pwrst, sleep_switch; > + int ret = 0; > + bool hwsup = false; > + > + if (!pwrdm || IS_ERR(pwrdm)) > + return -EINVAL; > + > + while (!(pwrdm->pwrsts & (1 << pwrst))) { > + if (pwrst == PWRDM_POWER_OFF) > + return ret; > + pwrst--; > + } > + > + next_pwrst = pwrdm_read_next_pwrst(pwrdm); > + if (next_pwrst == pwrst) > + return ret; > + > + sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, pwrst, > + &hwsup); > + > + ret = pwrdm_set_next_pwrst(pwrdm, pwrst); > + if (ret) > + pr_err("%s: unable to set power state of powerdomain: %s\n", > + __func__, pwrdm->name); > + > + _pwrdm_restore_clkdm_state(pwrdm, sleep_switch, hwsup); > + > + return ret; > +} > + > /** > * pwrdm_get_context_loss_count - get powerdomain's context loss count > * @pwrdm: struct powerdomain * to wait for > diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h > index 7c1534b..1edb3b7 100644 > --- a/arch/arm/mach-omap2/powerdomain.h > +++ b/arch/arm/mach-omap2/powerdomain.h > @@ -228,10 +228,11 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm); > int pwrdm_state_switch(struct powerdomain *pwrdm); > int pwrdm_pre_transition(struct powerdomain *pwrdm); > int pwrdm_post_transition(struct powerdomain *pwrdm); > -int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm); > int pwrdm_get_context_loss_count(struct powerdomain *pwrdm); > bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm); > > +extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 state); > + > extern void omap242x_powerdomains_init(void); > extern void omap243x_powerdomains_init(void); > extern void omap3xxx_powerdomains_init(void); > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Paul, -resending in plain text only, sorry about that- On Sun, Dec 9, 2012 at 2:23 AM, Paul Walmsley <paul@pwsan.com> wrote: > > Move omap_set_pwrdm_state() from the PM code to the powerdomain code, > and refactor it to split it up into several functions. A subsequent patch > will rename it to conform with the existing powerdomain function names. Glad to see this rather cryptic function getting a rewrite. It had never been clear what the function is doing so I think it owes some more comments. More comments below. > > > Signed-off-by: Paul Walmsley <paul@pwsan.com> > Cc: Jean Pihet <jean.pihet@newoldbits.com> > Cc: Kevin Hilman <khilman@deeprootsystems.com> > --- > arch/arm/mach-omap2/pm.c | 61 -------------------- > arch/arm/mach-omap2/pm.h | 1 > arch/arm/mach-omap2/powerdomain.c | 112 +++++++++++++++++++++++++++---------- > arch/arm/mach-omap2/powerdomain.h | 3 + > 4 files changed, 85 insertions(+), 92 deletions(-) > > diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c > index cc8ed0f..2e2a897 100644 > --- a/arch/arm/mach-omap2/pm.c > +++ b/arch/arm/mach-omap2/pm.c > @@ -76,10 +76,6 @@ static void __init omap2_init_processor_devices(void) > } > } > > -/* Types of sleep_switch used in omap_set_pwrdm_state */ > -#define FORCEWAKEUP_SWITCH 0 > -#define LOWPOWERSTATE_SWITCH 1 > - > int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) > { > if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) && > @@ -92,63 +88,6 @@ int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) > } > > /* > - * This sets pwrdm state (other than mpu & core. Currently only ON & > - * RET are supported. > - */ > -int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 pwrst) > -{ > - u8 curr_pwrst, next_pwrst; > - int sleep_switch = -1, ret = 0, hwsup = 0; > - > - if (!pwrdm || IS_ERR(pwrdm)) > - return -EINVAL; > - > - while (!(pwrdm->pwrsts & (1 << pwrst))) { > - if (pwrst == PWRDM_POWER_OFF) > - return ret; > - pwrst--; > - } > - > - next_pwrst = pwrdm_read_next_pwrst(pwrdm); > - if (next_pwrst == pwrst) > - return ret; > - > - curr_pwrst = pwrdm_read_pwrst(pwrdm); > - if (curr_pwrst < PWRDM_POWER_ON) { > - if ((curr_pwrst > pwrst) && > - (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) { > - sleep_switch = LOWPOWERSTATE_SWITCH; > - } else { > - hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); > - clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); > - sleep_switch = FORCEWAKEUP_SWITCH; > - } > - } > - > - ret = pwrdm_set_next_pwrst(pwrdm, pwrst); > - if (ret) > - pr_err("%s: unable to set power state of powerdomain: %s\n", > - __func__, pwrdm->name); > - > - switch (sleep_switch) { > - case FORCEWAKEUP_SWITCH: > - if (hwsup) > - clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); > - else > - clkdm_sleep(pwrdm->pwrdm_clkdms[0]); > - break; > - case LOWPOWERSTATE_SWITCH: > - pwrdm_set_lowpwrstchange(pwrdm); > - pwrdm_state_switch(pwrdm); > - break; > - } > - > - return ret; > -} > - > - > - > -/* > * This API is to be called during init to set the various voltage > * domains to the voltage as per the opp table. Typically we boot up > * at the nominal voltage. So this function finds out the rate of > diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h > index 686137d..707e9cb 100644 > --- a/arch/arm/mach-omap2/pm.h > +++ b/arch/arm/mach-omap2/pm.h > @@ -33,7 +33,6 @@ static inline int omap4_idle_init(void) > extern void *omap3_secure_ram_storage; > extern void omap3_pm_off_mode_enable(int); > extern void omap_sram_idle(void); > -extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); > extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); > extern int (*omap_pm_suspend)(void); > > diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c > index 97b3881..05f00660 100644 > --- a/arch/arm/mach-omap2/powerdomain.c > +++ b/arch/arm/mach-omap2/powerdomain.c > @@ -921,35 +921,6 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm) > return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0; > } > > -/** > - * pwrdm_set_lowpwrstchange - Request a low power state change > - * @pwrdm: struct powerdomain * > - * > - * Allows a powerdomain to transtion to a lower power sleep state > - * from an existing sleep state without waking up the powerdomain. > - * Returns -EINVAL if the powerdomain pointer is null or if the > - * powerdomain does not support LOWPOWERSTATECHANGE, or returns 0 > - * upon success. > - */ Can this kerneldoc be reused in the new code? Could you add some more documentation here? What is the goal of the function, what does it return etc. ? > > + > +static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, > + u8 pwrst, bool *hwsup) > > +{ > + u8 curr_pwrst, sleep_switch; > + > + curr_pwrst = pwrdm_read_pwrst(pwrdm); > + if (curr_pwrst < PWRDM_POWER_ON) { > + if (curr_pwrst > pwrst && > + pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && > + arch_pwrdm->pwrdm_set_lowpwrstchange) { > + sleep_switch = LOWPOWERSTATE_SWITCH; > + } else { > + *hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); > + clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); > + sleep_switch = FORCEWAKEUP_SWITCH; > + } > + } else { > + sleep_switch = ALREADYACTIVE_SWITCH; > + } > + > + return sleep_switch; > +} > + Same here > > +static void _pwrdm_restore_clkdm_state(struct powerdomain *pwrdm, > + u8 sleep_switch, bool hwsup) > +{ > + switch (sleep_switch) { > + case FORCEWAKEUP_SWITCH: > + if (hwsup) > + clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); > + else > + clkdm_sleep(pwrdm->pwrdm_clkdms[0]); > + break; > + case LOWPOWERSTATE_SWITCH: > + if (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && > + arch_pwrdm->pwrdm_set_lowpwrstchange) > + arch_pwrdm->pwrdm_set_lowpwrstchange(pwrdm); > + pwrdm_state_switch(pwrdm); > + break; > + } > +} > + > +/* > + * This sets pwrdm state (other than mpu & core. Currently only ON & > + * RET are supported. > + */ Same here. Is this one correct? Regards, Jean +int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) +{ + u8 next_pwrst, sleep_switch; + int ret = 0; + bool hwsup = false; + + if (!pwrdm || IS_ERR(pwrdm)) + return -EINVAL; + + while (!(pwrdm->pwrsts & (1 << pwrst))) { + if (pwrst == PWRDM_POWER_OFF) + return ret; + pwrst--; + } + + next_pwrst = pwrdm_read_next_pwrst(pwrdm); + if (next_pwrst == pwrst) + return ret; + + sleep_switch = _pwrdm_save_clkdm_state_and_ > > activate(pwrdm, pwrst, > + &hwsup); > + > + ret = pwrdm_set_next_pwrst(pwrdm, pwrst); > + if (ret) > + pr_err("%s: unable to set power state of powerdomain: %s\n", > + __func__, pwrdm->name); > + > + _pwrdm_restore_clkdm_state(pwrdm, sleep_switch, hwsup); > + > + return ret; > +} > + > /** > * pwrdm_get_context_loss_count - get powerdomain's context loss count > * @pwrdm: struct powerdomain * to wait for > diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h > index 7c1534b..1edb3b7 100644 > --- a/arch/arm/mach-omap2/powerdomain.h > +++ b/arch/arm/mach-omap2/powerdomain.h > @@ -228,10 +228,11 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm); > int pwrdm_state_switch(struct powerdomain *pwrdm); > int pwrdm_pre_transition(struct powerdomain *pwrdm); > int pwrdm_post_transition(struct powerdomain *pwrdm); > -int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm); > int pwrdm_get_context_loss_count(struct powerdomain *pwrdm); > bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm); > > +extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 state); > + > extern void omap242x_powerdomains_init(void); > extern void omap243x_powerdomains_init(void); > extern void omap3xxx_powerdomains_init(void); -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Dec 12, 2012 at 03:51:49PM +0530, Vaibhav Hiremath wrote: > > -int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 pwrst) > > -{ > > - u8 curr_pwrst, next_pwrst; > > - int sleep_switch = -1, ret = 0, hwsup = 0; > > - > > - if (!pwrdm || IS_ERR(pwrdm)) > > You can use IS_ERR_OR_NULL here. As this is removing code... However, if you pay attention to linux-kernel or linux-arm-kernel, you will notice that I've sent a patch deprecating IS_ERR_OR_NULL() and I'm starting to remove its use. IS_ERR_OR_NULL() creates more problems than it solves because people don't think about what the hell they're doing with it, or even whether it's appropriate to use it. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index cc8ed0f..2e2a897 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -76,10 +76,6 @@ static void __init omap2_init_processor_devices(void) } } -/* Types of sleep_switch used in omap_set_pwrdm_state */ -#define FORCEWAKEUP_SWITCH 0 -#define LOWPOWERSTATE_SWITCH 1 - int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) { if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) && @@ -92,63 +88,6 @@ int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) } /* - * This sets pwrdm state (other than mpu & core. Currently only ON & - * RET are supported. - */ -int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 pwrst) -{ - u8 curr_pwrst, next_pwrst; - int sleep_switch = -1, ret = 0, hwsup = 0; - - if (!pwrdm || IS_ERR(pwrdm)) - return -EINVAL; - - while (!(pwrdm->pwrsts & (1 << pwrst))) { - if (pwrst == PWRDM_POWER_OFF) - return ret; - pwrst--; - } - - next_pwrst = pwrdm_read_next_pwrst(pwrdm); - if (next_pwrst == pwrst) - return ret; - - curr_pwrst = pwrdm_read_pwrst(pwrdm); - if (curr_pwrst < PWRDM_POWER_ON) { - if ((curr_pwrst > pwrst) && - (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) { - sleep_switch = LOWPOWERSTATE_SWITCH; - } else { - hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); - clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); - sleep_switch = FORCEWAKEUP_SWITCH; - } - } - - ret = pwrdm_set_next_pwrst(pwrdm, pwrst); - if (ret) - pr_err("%s: unable to set power state of powerdomain: %s\n", - __func__, pwrdm->name); - - switch (sleep_switch) { - case FORCEWAKEUP_SWITCH: - if (hwsup) - clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); - else - clkdm_sleep(pwrdm->pwrdm_clkdms[0]); - break; - case LOWPOWERSTATE_SWITCH: - pwrdm_set_lowpwrstchange(pwrdm); - pwrdm_state_switch(pwrdm); - break; - } - - return ret; -} - - - -/* * This API is to be called during init to set the various voltage * domains to the voltage as per the opp table. Typically we boot up * at the nominal voltage. So this function finds out the rate of diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 686137d..707e9cb 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -33,7 +33,6 @@ static inline int omap4_idle_init(void) extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); -extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); extern int (*omap_pm_suspend)(void); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 97b3881..05f00660 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -921,35 +921,6 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm) return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0; } -/** - * pwrdm_set_lowpwrstchange - Request a low power state change - * @pwrdm: struct powerdomain * - * - * Allows a powerdomain to transtion to a lower power sleep state - * from an existing sleep state without waking up the powerdomain. - * Returns -EINVAL if the powerdomain pointer is null or if the - * powerdomain does not support LOWPOWERSTATECHANGE, or returns 0 - * upon success. - */ -int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) -{ - int ret = -EINVAL; - - if (!pwrdm) - return -EINVAL; - - if (!(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) - return -EINVAL; - - pr_debug("powerdomain: %s: setting LOWPOWERSTATECHANGE bit\n", - pwrdm->name); - - if (arch_pwrdm && arch_pwrdm->pwrdm_set_lowpwrstchange) - ret = arch_pwrdm->pwrdm_set_lowpwrstchange(pwrdm); - - return ret; -} - int pwrdm_state_switch(struct powerdomain *pwrdm) { int ret; @@ -984,6 +955,89 @@ int pwrdm_post_transition(struct powerdomain *pwrdm) return 0; } +/* Types of sleep_switch used in omap_set_pwrdm_state */ +#define ALREADYACTIVE_SWITCH 0 +#define FORCEWAKEUP_SWITCH 1 +#define LOWPOWERSTATE_SWITCH 2 + +static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, + u8 pwrst, bool *hwsup) +{ + u8 curr_pwrst, sleep_switch; + + curr_pwrst = pwrdm_read_pwrst(pwrdm); + if (curr_pwrst < PWRDM_POWER_ON) { + if (curr_pwrst > pwrst && + pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && + arch_pwrdm->pwrdm_set_lowpwrstchange) { + sleep_switch = LOWPOWERSTATE_SWITCH; + } else { + *hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); + clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); + sleep_switch = FORCEWAKEUP_SWITCH; + } + } else { + sleep_switch = ALREADYACTIVE_SWITCH; + } + + return sleep_switch; +} + +static void _pwrdm_restore_clkdm_state(struct powerdomain *pwrdm, + u8 sleep_switch, bool hwsup) +{ + switch (sleep_switch) { + case FORCEWAKEUP_SWITCH: + if (hwsup) + clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); + else + clkdm_sleep(pwrdm->pwrdm_clkdms[0]); + break; + case LOWPOWERSTATE_SWITCH: + if (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && + arch_pwrdm->pwrdm_set_lowpwrstchange) + arch_pwrdm->pwrdm_set_lowpwrstchange(pwrdm); + pwrdm_state_switch(pwrdm); + break; + } +} + +/* + * This sets pwrdm state (other than mpu & core. Currently only ON & + * RET are supported. + */ +int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) +{ + u8 next_pwrst, sleep_switch; + int ret = 0; + bool hwsup = false; + + if (!pwrdm || IS_ERR(pwrdm)) + return -EINVAL; + + while (!(pwrdm->pwrsts & (1 << pwrst))) { + if (pwrst == PWRDM_POWER_OFF) + return ret; + pwrst--; + } + + next_pwrst = pwrdm_read_next_pwrst(pwrdm); + if (next_pwrst == pwrst) + return ret; + + sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, pwrst, + &hwsup); + + ret = pwrdm_set_next_pwrst(pwrdm, pwrst); + if (ret) + pr_err("%s: unable to set power state of powerdomain: %s\n", + __func__, pwrdm->name); + + _pwrdm_restore_clkdm_state(pwrdm, sleep_switch, hwsup); + + return ret; +} + /** * pwrdm_get_context_loss_count - get powerdomain's context loss count * @pwrdm: struct powerdomain * to wait for diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 7c1534b..1edb3b7 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -228,10 +228,11 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm); int pwrdm_state_switch(struct powerdomain *pwrdm); int pwrdm_pre_transition(struct powerdomain *pwrdm); int pwrdm_post_transition(struct powerdomain *pwrdm); -int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm); int pwrdm_get_context_loss_count(struct powerdomain *pwrdm); bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm); +extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 state); + extern void omap242x_powerdomains_init(void); extern void omap243x_powerdomains_init(void); extern void omap3xxx_powerdomains_init(void);
Move omap_set_pwrdm_state() from the PM code to the powerdomain code, and refactor it to split it up into several functions. A subsequent patch will rename it to conform with the existing powerdomain function names. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jean Pihet <jean.pihet@newoldbits.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/pm.c | 61 -------------------- arch/arm/mach-omap2/pm.h | 1 arch/arm/mach-omap2/powerdomain.c | 112 +++++++++++++++++++++++++++---------- arch/arm/mach-omap2/powerdomain.h | 3 + 4 files changed, 85 insertions(+), 92 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html