Message ID | 1355941777-99352-2-git-send-email-gwenhael.goavec-merou@armadeus.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Wed, Dec 19, 2012 at 4:29 PM, Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> wrote: > EHCI PER clock (aka usb_div) must be enabled to have EHCI driver working. > > Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Have you considered to use the chipidea usb driver in mx27 instead? mx28/mx6 are already converted to the chipidea usb driver. Regards, Fabio Estevm
Dear Fabio Estevam, > On Wed, Dec 19, 2012 at 4:29 PM, Gwenhael Goavec-Merou > > <gwenhael.goavec-merou@armadeus.com> wrote: > > EHCI PER clock (aka usb_div) must be enabled to have EHCI driver working. > > > > Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> > > Have you considered to use the chipidea usb driver in mx27 instead? > mx28/mx6 are already converted to the chipidea usb driver. True, we should kill ehci-mxc ASAP. On the other hand, I'm not opposed to applying these, just bear in mind the driver might just disappear. Best regards, Marek Vasut
On Wed, Dec 19, 2012 at 07:29:37PM +0100, Gwenhael Goavec-Merou wrote: > EHCI PER clock (aka usb_div) must be enabled to have EHCI driver working. > > Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> > --- > drivers/usb/host/ehci-mxc.c | 12 +++++++++++- > 1 files changed, 11 insertions(+), 1 deletions(-) > > diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c > index ec7f5d2..8050631 100644 > --- a/drivers/usb/host/ehci-mxc.c > +++ b/drivers/usb/host/ehci-mxc.c > @@ -31,7 +31,7 @@ > #define ULPI_VIEWPORT_OFFSET 0x170 > > struct ehci_mxc_priv { > - struct clk *usbclk, *ahbclk, *phyclk; > + struct clk *usbclk, *ahbclk, *perclk, *phyclk; > struct usb_hcd *hcd; > }; > > @@ -150,6 +150,13 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) > } > clk_prepare_enable(priv->ahbclk); > > + priv->perclk = devm_clk_get(&pdev->dev, "per"); > + if (IS_ERR(priv->perclk)) { > + ret = PTR_ERR(priv->perclk); > + goto err_clk_per; > + } > + clk_prepare_enable(priv->perclk); Have you checked this clock is present on all SoCs using this driver? Other than that, +1 on using the chipidea driver as Fabio and Marek already noted. Sascha
On Wed, 19 Dec 2012 21:29:26 +0100 Sascha Hauer <s.hauer@pengutronix.de> wrote: > On Wed, Dec 19, 2012 at 07:29:37PM +0100, Gwenhael Goavec-Merou wrote: > > EHCI PER clock (aka usb_div) must be enabled to have EHCI driver working. > > > > Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> > > --- > > drivers/usb/host/ehci-mxc.c | 12 +++++++++++- > > 1 files changed, 11 insertions(+), 1 deletions(-) > > > > diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c > > index ec7f5d2..8050631 100644 > > --- a/drivers/usb/host/ehci-mxc.c > > +++ b/drivers/usb/host/ehci-mxc.c > > @@ -31,7 +31,7 @@ > > #define ULPI_VIEWPORT_OFFSET 0x170 > > > > struct ehci_mxc_priv { > > - struct clk *usbclk, *ahbclk, *phyclk; > > + struct clk *usbclk, *ahbclk, *perclk, *phyclk; > > struct usb_hcd *hcd; > > }; > > > > @@ -150,6 +150,13 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) > > } > > clk_prepare_enable(priv->ahbclk); > > > > + priv->perclk = devm_clk_get(&pdev->dev, "per"); > > + if (IS_ERR(priv->perclk)) { > > + ret = PTR_ERR(priv->perclk); > > + goto err_clk_per; > > + } > > + clk_prepare_enable(priv->perclk); > > Have you checked this clock is present on all SoCs using this driver? > Yes > > Other than that, +1 on using the chipidea driver as Fabio and Marek > already noted. > True. But I need to use a non-dt board based on imx27. Chipidea is not working yet for this chip and I have currently not enough time to do that. Gwenhaƫl
Dear gwenhael.goavec, > On Wed, 19 Dec 2012 21:29:26 +0100 > > Sascha Hauer <s.hauer@pengutronix.de> wrote: > > On Wed, Dec 19, 2012 at 07:29:37PM +0100, Gwenhael Goavec-Merou wrote: > > > EHCI PER clock (aka usb_div) must be enabled to have EHCI driver > > > working. > > > > > > Signed-off-by: Gwenhael Goavec-Merou > > > <gwenhael.goavec-merou@armadeus.com> --- > > > > > > drivers/usb/host/ehci-mxc.c | 12 +++++++++++- > > > 1 files changed, 11 insertions(+), 1 deletions(-) > > > > > > diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c > > > index ec7f5d2..8050631 100644 > > > --- a/drivers/usb/host/ehci-mxc.c > > > +++ b/drivers/usb/host/ehci-mxc.c > > > @@ -31,7 +31,7 @@ > > > > > > #define ULPI_VIEWPORT_OFFSET 0x170 > > > > > > struct ehci_mxc_priv { > > > > > > - struct clk *usbclk, *ahbclk, *phyclk; > > > + struct clk *usbclk, *ahbclk, *perclk, *phyclk; > > > > > > struct usb_hcd *hcd; > > > > > > }; > > > > > > @@ -150,6 +150,13 @@ static int ehci_mxc_drv_probe(struct > > > platform_device *pdev) > > > > > > } > > > clk_prepare_enable(priv->ahbclk); > > > > > > + priv->perclk = devm_clk_get(&pdev->dev, "per"); > > > + if (IS_ERR(priv->perclk)) { > > > + ret = PTR_ERR(priv->perclk); > > > + goto err_clk_per; > > > + } > > > + clk_prepare_enable(priv->perclk); > > > > Have you checked this clock is present on all SoCs using this driver? > > Yes > > > Other than that, +1 on using the chipidea driver as Fabio and Marek > > already noted. > > True. But I need to use a non-dt board based on imx27. Chipidea is > not working yet for this chip and I have currently not enough time to do > that. You're on your own then, sorry :-( Best regards, Marek Vasut
On Tue, 8 Jan 2013 14:01:36 +0100 Marek Vasut <marex@denx.de> wrote: > Dear gwenhael.goavec, > > > On Wed, 19 Dec 2012 21:29:26 +0100 > > > > Sascha Hauer <s.hauer@pengutronix.de> wrote: > > > On Wed, Dec 19, 2012 at 07:29:37PM +0100, Gwenhael Goavec-Merou wrote: > > > > EHCI PER clock (aka usb_div) must be enabled to have EHCI driver > > > > working. > > > > > > > > Signed-off-by: Gwenhael Goavec-Merou > > > > <gwenhael.goavec-merou@armadeus.com> --- > > > > > > > > drivers/usb/host/ehci-mxc.c | 12 +++++++++++- > > > > 1 files changed, 11 insertions(+), 1 deletions(-) > > > > > > > > diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c > > > > index ec7f5d2..8050631 100644 > > > > --- a/drivers/usb/host/ehci-mxc.c > > > > +++ b/drivers/usb/host/ehci-mxc.c > > > > @@ -31,7 +31,7 @@ > > > > > > > > #define ULPI_VIEWPORT_OFFSET 0x170 > > > > > > > > struct ehci_mxc_priv { > > > > > > > > - struct clk *usbclk, *ahbclk, *phyclk; > > > > + struct clk *usbclk, *ahbclk, *perclk, *phyclk; > > > > > > > > struct usb_hcd *hcd; > > > > > > > > }; > > > > > > > > @@ -150,6 +150,13 @@ static int ehci_mxc_drv_probe(struct > > > > platform_device *pdev) > > > > > > > > } > > > > clk_prepare_enable(priv->ahbclk); > > > > > > > > + priv->perclk = devm_clk_get(&pdev->dev, "per"); > > > > + if (IS_ERR(priv->perclk)) { > > > > + ret = PTR_ERR(priv->perclk); > > > > + goto err_clk_per; > > > > + } > > > > + clk_prepare_enable(priv->perclk); > > > > > > Have you checked this clock is present on all SoCs using this driver? > > > > Yes > > > > > Other than that, +1 on using the chipidea driver as Fabio and Marek > > > already noted. > > > > True. But I need to use a non-dt board based on imx27. Chipidea is > > not working yet for this chip and I have currently not enough time to do > > that. > > You're on your own then, sorry :-( > Yes i Know. But currently all i.MX27 based board without DT support have USB not working. Gwenhael
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index ec7f5d2..8050631 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -31,7 +31,7 @@ #define ULPI_VIEWPORT_OFFSET 0x170 struct ehci_mxc_priv { - struct clk *usbclk, *ahbclk, *phyclk; + struct clk *usbclk, *ahbclk, *perclk, *phyclk; struct usb_hcd *hcd; }; @@ -150,6 +150,13 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) } clk_prepare_enable(priv->ahbclk); + priv->perclk = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(priv->perclk)) { + ret = PTR_ERR(priv->perclk); + goto err_clk_per; + } + clk_prepare_enable(priv->perclk); + /* "dr" device has its own clock on i.MX51 */ priv->phyclk = devm_clk_get(&pdev->dev, "phy"); if (IS_ERR(priv->phyclk)) @@ -233,6 +240,8 @@ err_init: if (priv->phyclk) clk_disable_unprepare(priv->phyclk); + clk_disable_unprepare(priv->perclk); +err_clk_per: clk_disable_unprepare(priv->ahbclk); err_clk_ahb: clk_disable_unprepare(priv->usbclk); @@ -259,6 +268,7 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) clk_disable_unprepare(priv->usbclk); clk_disable_unprepare(priv->ahbclk); + clk_disable_unprepare(priv->perclk); if (priv->phyclk) clk_disable_unprepare(priv->phyclk);
EHCI PER clock (aka usb_div) must be enabled to have EHCI driver working. Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> --- drivers/usb/host/ehci-mxc.c | 12 +++++++++++- 1 files changed, 11 insertions(+), 1 deletions(-)