| Message ID | 1356567943-3836-1-git-send-email-linux@prisktech.co.nz (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 12/27/2012 12:25 AM, Tony Prisk wrote: > This patch adds support for .fb_check_var which is required when > X attempts to initialize the framebuffer. The only supported > resolution is the native resolution of the LCD panel, so we test > against the resolution supplied from the DT panel definition. Nack. As far as I understand this driver behaves as it is supposed to do according to drivers/video/skeletonfb.c. The frambuffer code seems to do what is documented as well. If the X driver cannot cope with a different var set than requested it needs to be fixed anyway as check_var is always allowed to alter the parameters requested. Strange, I thought I already saw X complaining about this when I added 30bpp mode to viafb. Best regards, Florian Tobias Schandinat > > Signed-off-by: Tony Prisk <linux@prisktech.co.nz> > --- > drivers/video/wm8505fb.c | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c > index 77539c1..c84e376 100644 > --- a/drivers/video/wm8505fb.c > +++ b/drivers/video/wm8505fb.c > @@ -41,10 +41,18 @@ > > #define to_wm8505fb_info(__info) container_of(__info, \ > struct wm8505fb_info, fb) > + > +struct lcd_params { > + u32 pixel_width; > + u32 pixel_height; > + u32 color_depth; > +}; > + > struct wm8505fb_info { > struct fb_info fb; > void __iomem *regbase; > unsigned int contrast; > + struct lcd_params lcd_params; > }; > > > @@ -248,8 +256,21 @@ static int wm8505fb_blank(int blank, struct fb_info *info) > return 0; > } > > +static int wm8505fb_check_var(struct fb_var_screeninfo *var, > + struct fb_info *info) > +{ > + struct wm8505fb_info *fbi = to_wm8505fb_info(info); > + if (!fbi) return -EINVAL; > + > + if (info->var.bits_per_pixel != fbi->lcd_params.color_depth) return -EINVAL; > + if (info->var.xres != fbi->lcd_params.pixel_width) return -EINVAL; > + if (info->var.yres != fbi->lcd_params.pixel_height) return -EINVAL; > + return 0; > +} > + > static struct fb_ops wm8505fb_ops = { > .owner = THIS_MODULE, > + .fb_check_var = wm8505fb_check_var, > .fb_set_par = wm8505fb_set_par, > .fb_setcolreg = wm8505fb_setcolreg, > .fb_fillrect = wmt_ge_fillrect, > @@ -354,6 +375,10 @@ static int __devinit wm8505fb_probe(struct platform_device *pdev) > goto failed_free_res; > } > > + fbi->lcd_params.pixel_width = of_mode.xres; > + fbi->lcd_params.pixel_height = of_mode.yres; > + fbi->lcd_params.color_depth = bpp; > + > of_mode.vmode = FB_VMODE_NONINTERLACED; > fb_videomode_to_var(&fbi->fb.var, &of_mode); > -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello. On 12/27/2012 03:25 AM, Tony Prisk wrote: > This patch adds support for .fb_check_var which is required when > X attempts to initialize the framebuffer. The only supported > resolution is the native resolution of the LCD panel, so we test > against the resolution supplied from the DT panel definition. > Signed-off-by: Tony Prisk <linux@prisktech.co.nz> > --- > drivers/video/wm8505fb.c | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c > index 77539c1..c84e376 100644 > --- a/drivers/video/wm8505fb.c > +++ b/drivers/video/wm8505fb.c [...] > @@ -248,8 +256,21 @@ static int wm8505fb_blank(int blank, struct fb_info *info) > return 0; > } > > +static int wm8505fb_check_var(struct fb_var_screeninfo *var, > + struct fb_info *info) > +{ > + struct wm8505fb_info *fbi = to_wm8505fb_info(info); > + if (!fbi) return -EINVAL; > + > + if (info->var.bits_per_pixel != fbi->lcd_params.color_depth) return -EINVAL; > + if (info->var.xres != fbi->lcd_params.pixel_width) return -EINVAL; > + if (info->var.yres != fbi->lcd_params.pixel_height) return -EINVAL; > + return 0; > +} > + [...] $ scripts/checkpatch.pl patches/video-vt8500-Fix-X-crash-when-initializing-framebuffer.patch ERROR: code indent should use tabs where possible #42: FILE: drivers/video/wm8505fb.c:263: + if (!fbi) return -EINVAL;$ WARNING: please, no spaces at the start of a line #42: FILE: drivers/video/wm8505fb.c:263: + if (!fbi) return -EINVAL;$ ERROR: trailing statements should be on next line #42: FILE: drivers/video/wm8505fb.c:263: + if (!fbi) return -EINVAL; WARNING: line over 80 characters #44: FILE: drivers/video/wm8505fb.c:265: + if (info->var.bits_per_pixel != fbi->lcd_params.color_depth) return -EINVAL; ERROR: trailing statements should be on next line #44: FILE: drivers/video/wm8505fb.c:265: + if (info->var.bits_per_pixel != fbi->lcd_params.color_depth) return -EINVAL; ERROR: trailing statements should be on next line #45: FILE: drivers/video/wm8505fb.c:266: + if (info->var.xres != fbi->lcd_params.pixel_width) return -EINVAL; ERROR: trailing statements should be on next line #46: FILE: drivers/video/wm8505fb.c:267: + if (info->var.yres != fbi->lcd_params.pixel_height) return -EINVAL; total: 5 errors, 2 warnings, 49 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile patches/video-vt8500-Fix-X-crash-when-initializing-framebuffer.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c index 77539c1..c84e376 100644 --- a/drivers/video/wm8505fb.c +++ b/drivers/video/wm8505fb.c @@ -41,10 +41,18 @@ #define to_wm8505fb_info(__info) container_of(__info, \ struct wm8505fb_info, fb) + +struct lcd_params { + u32 pixel_width; + u32 pixel_height; + u32 color_depth; +}; + struct wm8505fb_info { struct fb_info fb; void __iomem *regbase; unsigned int contrast; + struct lcd_params lcd_params; }; @@ -248,8 +256,21 @@ static int wm8505fb_blank(int blank, struct fb_info *info) return 0; } +static int wm8505fb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct wm8505fb_info *fbi = to_wm8505fb_info(info); + if (!fbi) return -EINVAL; + + if (info->var.bits_per_pixel != fbi->lcd_params.color_depth) return -EINVAL; + if (info->var.xres != fbi->lcd_params.pixel_width) return -EINVAL; + if (info->var.yres != fbi->lcd_params.pixel_height) return -EINVAL; + return 0; +} + static struct fb_ops wm8505fb_ops = { .owner = THIS_MODULE, + .fb_check_var = wm8505fb_check_var, .fb_set_par = wm8505fb_set_par, .fb_setcolreg = wm8505fb_setcolreg, .fb_fillrect = wmt_ge_fillrect, @@ -354,6 +375,10 @@ static int __devinit wm8505fb_probe(struct platform_device *pdev) goto failed_free_res; } + fbi->lcd_params.pixel_width = of_mode.xres; + fbi->lcd_params.pixel_height = of_mode.yres; + fbi->lcd_params.color_depth = bpp; + of_mode.vmode = FB_VMODE_NONINTERLACED; fb_videomode_to_var(&fbi->fb.var, &of_mode);
This patch adds support for .fb_check_var which is required when X attempts to initialize the framebuffer. The only supported resolution is the native resolution of the LCD panel, so we test against the resolution supplied from the DT panel definition. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> --- drivers/video/wm8505fb.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)