| Message ID | 1355606016-6509-1-git-send-email-sylvester.nawrocki@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 12/15/2012 02:13 PM, Sylwester Nawrocki wrote: > From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> > > This patch adds a document describing common OF bindings for video > capture, output and video processing devices. It is currently mainly > focused on video capture devices, with data interfaces defined in > standards like ITU-R BT.656 or MIPI CSI-2. > It also documents a method of describing data links between devices. (quickly/briefly) Reviewed-by: Stephen Warren <swarren@nvidia.com> -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/18/2012 06:14 PM, Stephen Warren wrote: > On 12/15/2012 02:13 PM, Sylwester Nawrocki wrote: >> From: Guennadi Liakhovetski<g.liakhovetski@gmx.de> >> >> This patch adds a document describing common OF bindings for video >> capture, output and video processing devices. It is currently mainly >> focused on video capture devices, with data interfaces defined in >> standards like ITU-R BT.656 or MIPI CSI-2. >> It also documents a method of describing data links between devices. > > (quickly/briefly) > Reviewed-by: Stephen Warren<swarren@nvidia.com> Thank you for the review. I'm just wondering if it is OK to merge this patch through the media tree, together with the remainder of this series. Or should it go through the device tree maintainer's tree ? -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/15/2012 03:13 PM, Sylwester Nawrocki wrote: > From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> > > This patch adds a document describing common OF bindings for video > capture, output and video processing devices. It is currently mainly > focused on video capture devices, with data interfaces defined in > standards like ITU-R BT.656 or MIPI CSI-2. > It also documents a method of describing data links between devices. > > Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Looks reasonable. You can merge this with the rest of the series. Acked-by: Rob Herring <rob.herring@calxeda.com> > --- > Hi, > > This is an updated version of patch [1]. My changes include resolving > issues pointed out during review, i.e.: > - renaming 'link' node to 'endpoint, > - renaming 'remote' phandle to 'remote-endpoint', > - file v4l2.txt renamed to video-interfaces.txt, > - removed references to V4L2, > - added short description of the example DT snippet > > and additionally: > - added "Required properties' paragraph, > - updated description of 'data-lanes' property, > - renamed all erroneous occurrences of 'data-width' to 'bus-width', > - added 'bus-width' property description, > - modified description of hsync-active, vsync-active properties, > - added a little paragraph further explaining that each endpoint > node has properties determining configuration of its corresponding > device. > > [1] https://patchwork.kernel.org/patch/1514381/ > > I'm still unsure about the first sentence, as these bindings can be > used for describing SoC internal connections between modules as well. > > I was considering adding something like: > > "This document describes common bindings for video capture, processing > and output devices using data buses defined in standards like ITU-R > BT.656, MIPI CSI-2,..." > > before the "General concept" paragraph. > > And maybe Documentation/devicetree/bindings/video/ would a better place > for this video-interfaces.txt file ? > > Thanks, > Sylwester > --- > .../devicetree/bindings/media/video-interfaces.txt | 198 ++++++++++++++++++++ > 1 files changed, 198 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/video-interfaces.txt > > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt > new file mode 100644 > index 0000000..10ebbc4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt > @@ -0,0 +1,198 @@ > +Common bindings for video data receiver and transmitter interfaces > + > +General concept > +--------------- > + > +Video data pipelines usually consist of external devices, e.g. camera sensors, > +controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including > +video DMA engines and video data processors. > + > +SoC internal blocks are described by DT nodes, placed similarly to other SoC > +blocks. External devices are represented as child nodes of their respective > +bus controller nodes, e.g. I2C. > + > +Data interfaces on all video devices are described by their child 'port' nodes. > +Configuration of a port depends on other devices participating in the data > +transfer and is described by 'endpoint' subnodes. > + > +dev { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + endpoint@0 { ... }; > + endpoint@1 { ... }; > + }; > + port@1 { ... }; > +}; > + > +If a port can be configured to work with more than one other device on the same > +bus, an 'endpoint' child node must be provided for each of them. If more than > +one port is present in a device node or there is more than one endpoint at a > +port, a common scheme, using '#address-cells', '#size-cells' and 'reg' properties > +is used. > + > +Two 'endpoint' nodes are linked with each other through their 'remote-endpoint' > +phandles. An endpoint subnode of a device contains all properties needed for > +configuration of this device for data exchange with the other device. In most > +cases properties at the peer 'endpoint' nodes will be identical, however > +they might need to be different when there are any signal modifications on the > +bus between two devices, e.g. there are logic signal inverters on the lines. > + > +Required properties > +------------------- > + > +If there is more that one 'port' or more than one 'endpoint' node following > +properties are required in relevant parent node: > + > +- #address-cells : number of cells required to define port number, should be 1. > +- #size-cells : should be zero. > + > +Optional endpoint properties > +---------------------------- > + > +- remote-endpoint : phandle to an 'endpoint' subnode of the other device node. > +- slave-mode : a boolean property, run the link in slave mode. Default is master > + mode. > +- bus-width : the number of data lines, valid for parallel buses. > +- data-shift: on parallel data busses, if bus-width is used to specify the > + number of data lines, data-shift can be used to specify which data lines are > + used, e.g. "bus-width=<10>; data-shift=<2>;" means, that lines 9:2 are used. > +- hsync-active : active state of HSYNC signal, 0/1 for LOW/HIGH respectively. > +- vsync-active : active state of VSYNC signal, 0/1 for LOW/HIGH respectively. > + Note, that if HSYNC and VSYNC polarities are not specified, embedded > + synchronization may be required, where supported. > +- data-active : similar to HSYNC and VSYNC, specifies data line polarity. > +- field-even-active: field signal level during the even field data transmission. > +- pclk-sample : rising (1) or falling (0) edge to sample the pixel clock signal. > +- data-lanes : an array of physical data lane indexes. Position of an entry > + determines logical lane number, while the value of an entry indicates physical > + lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1>, <2>;", > + assuming the clock lane is on hardware lane 0. This property is valid for > + serial buses only (e.g. MIPI CSI-2). > +- clock-lanes : a number of physical lane used as a clock lane. > +- clock-noncontinuous : a boolean property to allow MIPI CSI-2 non-continuous > + clock mode. > + > +Example > +------- > + > +The below example snippet describes two data pipelines. ov772x and imx074 are > +camera sensors with parallel and serial (MIPI CSI-2) video bus respectively. > +Both sensors are on I2C control bus corresponding to i2c0 controller node. > +ov772x sensor is linked directly to the ceu0 video host interface. imx074 is > +linked to ceu0 through MIPI CSI-2 receiver (csi2). ceu0 has a (single) DMA > +engine writing captured data to memory. ceu0 node has single 'port' node which > +indicates at any time only one of following data pipeline can be active: > +ov772x -> ceu0 or imx074 -> csi2 -> ceu0. > + > + ceu0: ceu@0xfe910000 { > + compatible = "renesas,sh-mobile-ceu"; > + reg = <0xfe910000 0xa0>; > + interrupts = <0x880>; > + > + mclk: master_clock { > + compatible = "renesas,ceu-clock"; > + #clock-cells = <1>; > + clock-frequency = <50000000>; /* Max clock frequency */ > + clock-output-names = "mclk"; > + }; > + > + port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ceu0_1: endpoint@1 { > + reg = <1>; /* Local endpoint # */ > + remote = <&ov772x_1_1>; /* Remote phandle */ > + bus-width = <8>; /* Used data lines */ > + data-shift = <0>; /* Lines 7:0 are used */ > + > + /* If hsync-active/vsync-active are missing, > + embedded bt.605 sync is used */ > + hsync-active = <1>; /* Active high */ > + vsync-active = <1>; /* Active high */ > + data-active = <1>; /* Active high */ > + pclk-sample = <1>; /* Rising */ > + }; > + > + ceu0_0: endpoint@0 { > + reg = <0>; > + remote = <&csi2_2>; > + immutable; > + }; > + }; > + }; > + > + i2c0: i2c@0xfff20000 { > + ... > + ov772x_1: camera@0x21 { > + compatible = "omnivision,ov772x"; > + reg = <0x21>; > + vddio-supply = <®ulator1>; > + vddcore-supply = <®ulator2>; > + > + clock-frequency = <20000000>; > + clocks = <&mclk 0>; > + clock-names = "xclk"; > + > + port { > + /* With 1 endpoint per port no need in addresses. */ > + ov772x_1_1: endpoint { > + bus-width = <8>; > + remote-endpoint = <&ceu0_1>; > + hsync-active = <1>; > + vsync-active = <0>; /* Who came up with an > + inverter here ?... */ > + data-active = <1>; > + pclk-sample = <1>; > + }; > + }; > + }; > + > + imx074: camera@0x1a { > + compatible = "sony,imx074"; > + reg = <0x1a>; > + vddio-supply = <®ulator1>; > + vddcore-supply = <®ulator2>; > + > + clock-frequency = <30000000>; /* Shared clock with ov772x_1 */ > + clocks = <&mclk 0>; > + clock-names = "sysclk"; /* Assuming this is the > + name in the datasheet */ > + port { > + imx074_1: endpoint { > + clock-lanes = <0>; > + data-lanes = <1>, <2>; > + remote-endpoint = <&csi2_1>; > + }; > + }; > + }; > + }; > + > + csi2: csi2@0xffc90000 { > + compatible = "renesas,sh-mobile-csi2"; > + reg = <0xffc90000 0x1000>; > + interrupts = <0x17a0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */ > + reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S, > + PHY_M has port address 0, > + is unused. */ > + csi2_1: endpoint { > + clock-lanes = <0>; > + data-lanes = <2>, <1>; > + remote-endpoint = <&imx074_1>; > + }; > + }; > + port@2 { > + reg = <2>; /* port 2: link to the CEU */ > + > + csi2_2: endpoint { > + immutable; > + remote-endpoint = <&ceu0_0>; > + }; > + }; > + }; > -- > 1.7.4.1 > > _______________________________________________ > devicetree-discuss mailing list > devicetree-discuss@lists.ozlabs.org > https://lists.ozlabs.org/listinfo/devicetree-discuss > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt new file mode 100644 index 0000000..10ebbc4 --- /dev/null +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -0,0 +1,198 @@ +Common bindings for video data receiver and transmitter interfaces + +General concept +--------------- + +Video data pipelines usually consist of external devices, e.g. camera sensors, +controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including +video DMA engines and video data processors. + +SoC internal blocks are described by DT nodes, placed similarly to other SoC +blocks. External devices are represented as child nodes of their respective +bus controller nodes, e.g. I2C. + +Data interfaces on all video devices are described by their child 'port' nodes. +Configuration of a port depends on other devices participating in the data +transfer and is described by 'endpoint' subnodes. + +dev { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + endpoint@0 { ... }; + endpoint@1 { ... }; + }; + port@1 { ... }; +}; + +If a port can be configured to work with more than one other device on the same +bus, an 'endpoint' child node must be provided for each of them. If more than +one port is present in a device node or there is more than one endpoint at a +port, a common scheme, using '#address-cells', '#size-cells' and 'reg' properties +is used. + +Two 'endpoint' nodes are linked with each other through their 'remote-endpoint' +phandles. An endpoint subnode of a device contains all properties needed for +configuration of this device for data exchange with the other device. In most +cases properties at the peer 'endpoint' nodes will be identical, however +they might need to be different when there are any signal modifications on the +bus between two devices, e.g. there are logic signal inverters on the lines. + +Required properties +------------------- + +If there is more that one 'port' or more than one 'endpoint' node following +properties are required in relevant parent node: + +- #address-cells : number of cells required to define port number, should be 1. +- #size-cells : should be zero. + +Optional endpoint properties +---------------------------- + +- remote-endpoint : phandle to an 'endpoint' subnode of the other device node. +- slave-mode : a boolean property, run the link in slave mode. Default is master + mode. +- bus-width : the number of data lines, valid for parallel buses. +- data-shift: on parallel data busses, if bus-width is used to specify the + number of data lines, data-shift can be used to specify which data lines are + used, e.g. "bus-width=<10>; data-shift=<2>;" means, that lines 9:2 are used. +- hsync-active : active state of HSYNC signal, 0/1 for LOW/HIGH respectively. +- vsync-active : active state of VSYNC signal, 0/1 for LOW/HIGH respectively. + Note, that if HSYNC and VSYNC polarities are not specified, embedded + synchronization may be required, where supported. +- data-active : similar to HSYNC and VSYNC, specifies data line polarity. +- field-even-active: field signal level during the even field data transmission. +- pclk-sample : rising (1) or falling (0) edge to sample the pixel clock signal. +- data-lanes : an array of physical data lane indexes. Position of an entry + determines logical lane number, while the value of an entry indicates physical + lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1>, <2>;", + assuming the clock lane is on hardware lane 0. This property is valid for + serial buses only (e.g. MIPI CSI-2). +- clock-lanes : a number of physical lane used as a clock lane. +- clock-noncontinuous : a boolean property to allow MIPI CSI-2 non-continuous + clock mode. + +Example +------- + +The below example snippet describes two data pipelines. ov772x and imx074 are +camera sensors with parallel and serial (MIPI CSI-2) video bus respectively. +Both sensors are on I2C control bus corresponding to i2c0 controller node. +ov772x sensor is linked directly to the ceu0 video host interface. imx074 is +linked to ceu0 through MIPI CSI-2 receiver (csi2). ceu0 has a (single) DMA +engine writing captured data to memory. ceu0 node has single 'port' node which +indicates at any time only one of following data pipeline can be active: +ov772x -> ceu0 or imx074 -> csi2 -> ceu0. + + ceu0: ceu@0xfe910000 { + compatible = "renesas,sh-mobile-ceu"; + reg = <0xfe910000 0xa0>; + interrupts = <0x880>; + + mclk: master_clock { + compatible = "renesas,ceu-clock"; + #clock-cells = <1>; + clock-frequency = <50000000>; /* Max clock frequency */ + clock-output-names = "mclk"; + }; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ceu0_1: endpoint@1 { + reg = <1>; /* Local endpoint # */ + remote = <&ov772x_1_1>; /* Remote phandle */ + bus-width = <8>; /* Used data lines */ + data-shift = <0>; /* Lines 7:0 are used */ + + /* If hsync-active/vsync-active are missing, + embedded bt.605 sync is used */ + hsync-active = <1>; /* Active high */ + vsync-active = <1>; /* Active high */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + + ceu0_0: endpoint@0 { + reg = <0>; + remote = <&csi2_2>; + immutable; + }; + }; + }; + + i2c0: i2c@0xfff20000 { + ... + ov772x_1: camera@0x21 { + compatible = "omnivision,ov772x"; + reg = <0x21>; + vddio-supply = <®ulator1>; + vddcore-supply = <®ulator2>; + + clock-frequency = <20000000>; + clocks = <&mclk 0>; + clock-names = "xclk"; + + port { + /* With 1 endpoint per port no need in addresses. */ + ov772x_1_1: endpoint { + bus-width = <8>; + remote-endpoint = <&ceu0_1>; + hsync-active = <1>; + vsync-active = <0>; /* Who came up with an + inverter here ?... */ + data-active = <1>; + pclk-sample = <1>; + }; + }; + }; + + imx074: camera@0x1a { + compatible = "sony,imx074"; + reg = <0x1a>; + vddio-supply = <®ulator1>; + vddcore-supply = <®ulator2>; + + clock-frequency = <30000000>; /* Shared clock with ov772x_1 */ + clocks = <&mclk 0>; + clock-names = "sysclk"; /* Assuming this is the + name in the datasheet */ + port { + imx074_1: endpoint { + clock-lanes = <0>; + data-lanes = <1>, <2>; + remote-endpoint = <&csi2_1>; + }; + }; + }; + }; + + csi2: csi2@0xffc90000 { + compatible = "renesas,sh-mobile-csi2"; + reg = <0xffc90000 0x1000>; + interrupts = <0x17a0>; + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */ + reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S, + PHY_M has port address 0, + is unused. */ + csi2_1: endpoint { + clock-lanes = <0>; + data-lanes = <2>, <1>; + remote-endpoint = <&imx074_1>; + }; + }; + port@2 { + reg = <2>; /* port 2: link to the CEU */ + + csi2_2: endpoint { + immutable; + remote-endpoint = <&ceu0_0>; + }; + }; + };