diff mbox

[4/4] ALSA: pxa27x: rename pxa27x_assert_ac97()

Message ID 1357499640-13871-5-git-send-email-mikedunn@newsguy.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mike Dunn Jan. 6, 2013, 7:14 p.m. UTC 
This patch does nothing functionally, it just gives the function a new name and
modifies the prototype slightly in order to clarify what the function is doing
(which is not necessarily asserting the reset).
Some commentary also added.

Tested on a palm treo 680 machine.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
---

checkpatch.pl issues a warning for this patch:
	      WARNING: externs should be avoided in .c files
but I just want to rename the function.

 arch/arm/mach-pxa/pxa27x.c  |   29 +++++++++++++++++++----------
 sound/arm/pxa2xx-ac97-lib.c |    8 ++++----
 2 files changed, 23 insertions(+), 14 deletions(-)

Comments

Igor Grinberg Jan. 7, 2013, 9:39 a.m. UTC | #1 
On 01/06/13 21:14, Mike Dunn wrote:
> This patch does nothing functionally, it just gives the function a new name and
> modifies the prototype slightly in order to clarify what the function is doing
> (which is not necessarily asserting the reset).
> Some commentary also added.
> 
> Tested on a palm treo 680 machine.
> 
> Signed-off-by: Mike Dunn <mikedunn@newsguy.com>

This patch makes sense, but again raising your concern...
The gpio_direction_output(reset_gpio, 1) should be called after
the change to AF0.

> ---
> 
> checkpatch.pl issues a warning for this patch:
> 	      WARNING: externs should be avoided in .c files
> but I just want to rename the function.
> 
>  arch/arm/mach-pxa/pxa27x.c  |   29 +++++++++++++++++++----------
>  sound/arm/pxa2xx-ac97-lib.c |    8 ++++----
>  2 files changed, 23 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
> index eea90fe..896bf94 100644
> --- a/arch/arm/mach-pxa/pxa27x.c
> +++ b/arch/arm/mach-pxa/pxa27x.c
> @@ -53,26 +53,35 @@ static unsigned long ac97_reset_config[] = {
>  	GPIO95_AC97_nRESET,
>  };
>  
> -void pxa27x_assert_ac97reset(int reset_gpio, int on)
> +void pxa27x_configure_ac97reset(int reset_mfp, bool to_gpio)
>  {
> +	/*
> +	 * This helper function is used to work around a bug in the pxa27x's
> +	 * ac97 controller during a warm reset.  The configuration of the
> +	 * reset_mfp is changed as follows:
> +	 * to_gpio == true: configured to generic output gpio and driven high
> +	 * to_gpio == false: configured to ac97 controller alt fn AC97_nRESET
> +	 */
> +
>  	/* set direction and level before switching from ac97 alt fn to gpio */
> -	if (on) {
> -		int ret = gpio_direction_output(reset_gpio, 1);
> +	if (to_gpio == true) {
> +		int ret = gpio_direction_output(reset_mfp, 1);
>  		if (ret) {
>  			pr_err("%s: gpio_direction_output failed: %d\n",
>  				__func__, ret);
>  			return;
>  		}
>  	}
> -	if (reset_gpio == 113)
> -		pxa2xx_mfp_config(on ? &ac97_reset_config[0] :
> -				       &ac97_reset_config[1], 1);
>  
> -	if (reset_gpio == 95)
> -		pxa2xx_mfp_config(on ? &ac97_reset_config[2] :
> -				       &ac97_reset_config[3], 1);
> +	if (reset_mfp == 113)
> +		pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[0] :
> +				  &ac97_reset_config[1], 1);
> +
> +	if (reset_mfp == 95)
> +		pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[2] :
> +				  &ac97_reset_config[3], 1);
>  }
> -EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset);
> +EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
>  
>  /* Crystal clock: 13MHz */
>  #define BASE_CLK	13000000
> diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
> index 416d2e3..fbac476 100644
> --- a/sound/arm/pxa2xx-ac97-lib.c
> +++ b/sound/arm/pxa2xx-ac97-lib.c
> @@ -34,7 +34,7 @@ static struct clk *ac97_clk;
>  static struct clk *ac97conf_clk;
>  static int reset_gpio;
>  
> -extern void pxa27x_assert_ac97reset(int reset_gpio, int on);
> +extern void pxa27x_configure_ac97reset(int reset_mfp, bool to_gpio);
>  
>  /*
>   * Beware PXA27x bugs:
> @@ -140,10 +140,10 @@ static inline void pxa_ac97_warm_pxa27x(void)
>  	gsr_bits = 0;
>  
>  	/* warm reset broken on Bulverde, so manually keep AC97 reset high */
> -	pxa27x_assert_ac97reset(reset_gpio, 1);
> +	pxa27x_configure_ac97reset(reset_gpio, true);
>  	udelay(10);
>  	GCR |= GCR_WARM_RST;
> -	pxa27x_assert_ac97reset(reset_gpio, 0);
> +	pxa27x_configure_ac97reset(reset_gpio, false);
>  	udelay(500);
>  }
>  
> @@ -351,7 +351,7 @@ int pxa2xx_ac97_hw_probe(struct platform_device *dev)
>  			       __func__, ret);
>  			goto err_conf;
>  		}
> -		pxa27x_assert_ac97reset(reset_gpio, 0);
> +		pxa27x_configure_ac97reset(reset_gpio, false);
>  		ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
>  		if (IS_ERR(ac97conf_clk)) {
>  			ret = PTR_ERR(ac97conf_clk);
Mike Dunn Jan. 7, 2013, 2:34 p.m. UTC | #2 
On 01/07/2013 01:39 AM, Igor Grinberg wrote:
> 
> 
> On 01/06/13 21:14, Mike Dunn wrote:
>> This patch does nothing functionally, it just gives the function a new name and
>> modifies the prototype slightly in order to clarify what the function is doing
>> (which is not necessarily asserting the reset).
>> Some commentary also added.
>>
>> Tested on a palm treo 680 machine.
>>
>> Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
> 
> This patch makes sense, but again raising your concern...
> The gpio_direction_output(reset_gpio, 1) should be called after
> the change to AF0.


Can you clarify please?  Don't you mean *before* the change to AF0?  The proper
values must be set in the GPDR and GPSR/GPCR before changing to AF0, no?  This
not only makes intuitive sense, it is also consistent with the information in
the pxa270 developer's manual.  Once AF0 is set, the last values that were set
for direction and level take immediate effect, no?

Thanks,
Mike
Igor Grinberg Jan. 7, 2013, 3:41 p.m. UTC | #3 
On 01/07/13 16:34, Mike Dunn wrote:
> On 01/07/2013 01:39 AM, Igor Grinberg wrote:
>>
>>
>> On 01/06/13 21:14, Mike Dunn wrote:
>>> This patch does nothing functionally, it just gives the function a new name and
>>> modifies the prototype slightly in order to clarify what the function is doing
>>> (which is not necessarily asserting the reset).
>>> Some commentary also added.
>>>
>>> Tested on a palm treo 680 machine.
>>>
>>> Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
>>
>> This patch makes sense, but again raising your concern...
>> The gpio_direction_output(reset_gpio, 1) should be called after
>> the change to AF0.
> 
> 
> Can you clarify please?  Don't you mean *before* the change to AF0?  The proper
> values must be set in the GPDR and GPSR/GPCR before changing to AF0, no?  This
> not only makes intuitive sense, it is also consistent with the information in
> the pxa270 developer's manual.  Once AF0 is set, the last values that were set
> for direction and level take immediate effect, no?

Yes, you are right, I've just forgot about the
#define GPIOx_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(...)
you introduced in patch 2, so no concern here. Sorry...
diff mbox

Patch

diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index eea90fe..896bf94 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -53,26 +53,35 @@  static unsigned long ac97_reset_config[] = {
 	GPIO95_AC97_nRESET,
 };
 
-void pxa27x_assert_ac97reset(int reset_gpio, int on)
+void pxa27x_configure_ac97reset(int reset_mfp, bool to_gpio)
 {
+	/*
+	 * This helper function is used to work around a bug in the pxa27x's
+	 * ac97 controller during a warm reset.  The configuration of the
+	 * reset_mfp is changed as follows:
+	 * to_gpio == true: configured to generic output gpio and driven high
+	 * to_gpio == false: configured to ac97 controller alt fn AC97_nRESET
+	 */
+
 	/* set direction and level before switching from ac97 alt fn to gpio */
-	if (on) {
-		int ret = gpio_direction_output(reset_gpio, 1);
+	if (to_gpio == true) {
+		int ret = gpio_direction_output(reset_mfp, 1);
 		if (ret) {
 			pr_err("%s: gpio_direction_output failed: %d\n",
 				__func__, ret);
 			return;
 		}
 	}
-	if (reset_gpio == 113)
-		pxa2xx_mfp_config(on ? &ac97_reset_config[0] :
-				       &ac97_reset_config[1], 1);
 
-	if (reset_gpio == 95)
-		pxa2xx_mfp_config(on ? &ac97_reset_config[2] :
-				       &ac97_reset_config[3], 1);
+	if (reset_mfp == 113)
+		pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[0] :
+				  &ac97_reset_config[1], 1);
+
+	if (reset_mfp == 95)
+		pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[2] :
+				  &ac97_reset_config[3], 1);
 }
-EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset);
+EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
 
 /* Crystal clock: 13MHz */
 #define BASE_CLK	13000000
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 416d2e3..fbac476 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -34,7 +34,7 @@  static struct clk *ac97_clk;
 static struct clk *ac97conf_clk;
 static int reset_gpio;
 
-extern void pxa27x_assert_ac97reset(int reset_gpio, int on);
+extern void pxa27x_configure_ac97reset(int reset_mfp, bool to_gpio);
 
 /*
  * Beware PXA27x bugs:
@@ -140,10 +140,10 @@  static inline void pxa_ac97_warm_pxa27x(void)
 	gsr_bits = 0;
 
 	/* warm reset broken on Bulverde, so manually keep AC97 reset high */
-	pxa27x_assert_ac97reset(reset_gpio, 1);
+	pxa27x_configure_ac97reset(reset_gpio, true);
 	udelay(10);
 	GCR |= GCR_WARM_RST;
-	pxa27x_assert_ac97reset(reset_gpio, 0);
+	pxa27x_configure_ac97reset(reset_gpio, false);
 	udelay(500);
 }
 
@@ -351,7 +351,7 @@  int pxa2xx_ac97_hw_probe(struct platform_device *dev)
 			       __func__, ret);
 			goto err_conf;
 		}
-		pxa27x_assert_ac97reset(reset_gpio, 0);
+		pxa27x_configure_ac97reset(reset_gpio, false);
 		ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
 		if (IS_ERR(ac97conf_clk)) {
 			ret = PTR_ERR(ac97conf_clk);