| Message ID | 1356646919-2974-1-git-send-email-sebastian.hesselbarth@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Dec 27, 2012 at 11:21:59PM +0100, Sebastian Hesselbarth wrote: > CuBox needs to enable USB power on a gpio pin. Add a fixed regulator > to always enable usb power on boot. > > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > --- > Cc: Russell King <linux@arm.linux.org.uk> > Cc: Jason Cooper <jason@lakedaemon.net> > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > --- > arch/arm/boot/dts/dove-cubox.dts | 25 ++++++++++++++++++++++++- > arch/arm/mach-dove/Kconfig | 2 ++ > 2 files changed, 26 insertions(+), 1 deletion(-) Applied to mvebu/dt thx, Jason.
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index bed5b62..7e3065a 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -26,6 +26,24 @@ linux,default-trigger = "default-on"; }; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 1 0>; + }; + }; }; &uart0 { status = "okay"; }; @@ -50,9 +68,14 @@ }; &pinctrl { - pinctrl-0 = <&pmx_gpio_12>; + pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>; pinctrl-names = "default"; + pmx_gpio_1: pmx-gpio-1 { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + pmx_gpio_12: pmx-gpio-12 { marvell,pins = "mpp12"; marvell,function = "gpio"; diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index aedd0ba..36469d8 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -24,6 +24,8 @@ config MACH_DOVE_DT bool "Marvell Dove Flattened Device Tree" select MVEBU_CLK_CORE select MVEBU_CLK_GATING + select REGULATOR + select REGULATOR_FIXED_VOLTAGE select USE_OF help Say 'Y' here if you want your kernel to support the
CuBox needs to enable USB power on a gpio pin. Add a fixed regulator to always enable usb power on boot. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/dove-cubox.dts | 25 ++++++++++++++++++++++++- arch/arm/mach-dove/Kconfig | 2 ++ 2 files changed, 26 insertions(+), 1 deletion(-)