| Message ID | 1358634477-25868-3-git-send-email-ezequiel.garcia@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
[...] > diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c > index 01ce462..f7de9eb 100644 > --- a/arch/arm/mach-omap2/gpmc.c > +++ b/arch/arm/mach-omap2/gpmc.c > @@ -39,6 +39,7 @@ > #include "omap_device.h" > #include "gpmc.h" > #include "gpmc-nand.h" > +#include "gpmc-onenand.h" > > #define DEVICE_NAME "omap-gpmc" > > @@ -1259,6 +1260,43 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, > } > #endif > > +#ifdef CONFIG_MTD_ONENAND > +static int gpmc_probe_onenand_child(struct platform_device *pdev, > + struct device_node *child) > +{ > + u32 val; > + struct omap_onenand_platform_data *gpmc_onenand_data; > + > + if (of_property_read_u32(child, "reg", &val) < 0) { > + dev_err(&pdev->dev, "%s has no 'reg' property\n", > + child->full_name); > + return -ENODEV; > + } > + > + gpmc_onenand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_onenand_data), > + GFP_KERNEL); > + if (!gpmc_onenand_data) > + return -ENOMEM; > + > + gpmc_onenand_data->cs = val; > + gpmc_onenand_data->of_node = child; > + gpmc_onenand_data->dma_channel = -1; > + > + if (!of_property_read_u32(child, "dma-channel", &val)) > + gpmc_onenand_data->dma_channel = val; > + > + gpmc_onenand_init(gpmc_onenand_data); > + > + return 0; > +} > +#else > +static int gpmc_probe_onenand_child(struct platform_device *pdev, > + struct device_node *child) > +{ > + return 0; > +} > +#endif > + > static int gpmc_probe_dt(struct platform_device *pdev) > { > int ret; > @@ -1276,6 +1314,12 @@ static int gpmc_probe_dt(struct platform_device *pdev) > return ret; > } > This doesn't look right to me: > + for_each_node_by_name(child, "onenand") { > + ret = gpmc_probe_onenand_child(pdev, child); > + of_node_put(child); > + if (ret < 0) > + return ret; > + } for_each_node_by_name automatically calls of_node_put on each node once passed, and as far as I can tell, gpmc_probe_onenand_child doesn't do anything that'd increment a node's refcount. As far as I can see, you only need the of_node_put in the error case: for_each_node_by_name(child, "onenand") { ret = gpmc_probe_onenand_child(pdev, child); if (ret < 0) { of_node_put(child); return ret; } } Have I missed something here? > return 0; > } > #else > -- > 1.7.8.6 > > _______________________________________________ > devicetree-discuss mailing list > devicetree-discuss@lists.ozlabs.org > https://lists.ozlabs.org/listinfo/devicetree-discuss > Thanks, Mark.
Hi Mark, On Mon, Jan 21, 2013 at 9:30 AM, Mark Rutland <mark.rutland@arm.com> wrote: > [...] > >> diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c >> index 01ce462..f7de9eb 100644 >> --- a/arch/arm/mach-omap2/gpmc.c >> +++ b/arch/arm/mach-omap2/gpmc.c >> @@ -39,6 +39,7 @@ >> #include "omap_device.h" >> #include "gpmc.h" >> #include "gpmc-nand.h" >> +#include "gpmc-onenand.h" >> >> #define DEVICE_NAME "omap-gpmc" >> >> @@ -1259,6 +1260,43 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, >> } >> #endif >> >> +#ifdef CONFIG_MTD_ONENAND >> +static int gpmc_probe_onenand_child(struct platform_device *pdev, >> + struct device_node *child) >> +{ >> + u32 val; >> + struct omap_onenand_platform_data *gpmc_onenand_data; >> + >> + if (of_property_read_u32(child, "reg", &val) < 0) { >> + dev_err(&pdev->dev, "%s has no 'reg' property\n", >> + child->full_name); >> + return -ENODEV; >> + } >> + >> + gpmc_onenand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_onenand_data), >> + GFP_KERNEL); >> + if (!gpmc_onenand_data) >> + return -ENOMEM; >> + >> + gpmc_onenand_data->cs = val; >> + gpmc_onenand_data->of_node = child; >> + gpmc_onenand_data->dma_channel = -1; >> + >> + if (!of_property_read_u32(child, "dma-channel", &val)) >> + gpmc_onenand_data->dma_channel = val; >> + >> + gpmc_onenand_init(gpmc_onenand_data); >> + >> + return 0; >> +} >> +#else >> +static int gpmc_probe_onenand_child(struct platform_device *pdev, >> + struct device_node *child) >> +{ >> + return 0; >> +} >> +#endif >> + >> static int gpmc_probe_dt(struct platform_device *pdev) >> { >> int ret; >> @@ -1276,6 +1314,12 @@ static int gpmc_probe_dt(struct platform_device *pdev) >> return ret; >> } >> > > This doesn't look right to me: > >> + for_each_node_by_name(child, "onenand") { >> + ret = gpmc_probe_onenand_child(pdev, child); >> + of_node_put(child); >> + if (ret < 0) >> + return ret; >> + } > > for_each_node_by_name automatically calls of_node_put on each node once passed, > and as far as I can tell, gpmc_probe_onenand_child doesn't do anything that'd > increment a node's refcount. > > As far as I can see, you only need the of_node_put in the error case: > > for_each_node_by_name(child, "onenand") { > ret = gpmc_probe_onenand_child(pdev, child); > if (ret < 0) { > of_node_put(child); > return ret; > } > } > > Have I missed something here? > Mmm... perhaps I've overlooked that code. After some digging through source and reading for_each_node_by_name() it seems to me you're right. @Daniel: It seems this would also apply to the NAND binding. What do you think?
* Ezequiel Garcia <elezegarcia@gmail.com> [130121 09:00]: > Hi Mark, > > On Mon, Jan 21, 2013 at 9:30 AM, Mark Rutland <mark.rutland@arm.com> wrote: > > [...] > > > >> diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c > >> index 01ce462..f7de9eb 100644 > >> --- a/arch/arm/mach-omap2/gpmc.c > >> +++ b/arch/arm/mach-omap2/gpmc.c > >> @@ -39,6 +39,7 @@ > >> #include "omap_device.h" > >> #include "gpmc.h" > >> #include "gpmc-nand.h" > >> +#include "gpmc-onenand.h" > >> > >> #define DEVICE_NAME "omap-gpmc" > >> > >> @@ -1259,6 +1260,43 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, > >> } > >> #endif > >> > >> +#ifdef CONFIG_MTD_ONENAND > >> +static int gpmc_probe_onenand_child(struct platform_device *pdev, > >> + struct device_node *child) > >> +{ > >> + u32 val; > >> + struct omap_onenand_platform_data *gpmc_onenand_data; > >> + > >> + if (of_property_read_u32(child, "reg", &val) < 0) { > >> + dev_err(&pdev->dev, "%s has no 'reg' property\n", > >> + child->full_name); > >> + return -ENODEV; > >> + } > >> + > >> + gpmc_onenand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_onenand_data), > >> + GFP_KERNEL); > >> + if (!gpmc_onenand_data) > >> + return -ENOMEM; > >> + > >> + gpmc_onenand_data->cs = val; > >> + gpmc_onenand_data->of_node = child; > >> + gpmc_onenand_data->dma_channel = -1; > >> + > >> + if (!of_property_read_u32(child, "dma-channel", &val)) > >> + gpmc_onenand_data->dma_channel = val; > >> + > >> + gpmc_onenand_init(gpmc_onenand_data); > >> + > >> + return 0; > >> +} > >> +#else > >> +static int gpmc_probe_onenand_child(struct platform_device *pdev, > >> + struct device_node *child) > >> +{ > >> + return 0; > >> +} > >> +#endif > >> + > >> static int gpmc_probe_dt(struct platform_device *pdev) > >> { > >> int ret; > >> @@ -1276,6 +1314,12 @@ static int gpmc_probe_dt(struct platform_device *pdev) > >> return ret; > >> } > >> > > > > This doesn't look right to me: > > > >> + for_each_node_by_name(child, "onenand") { > >> + ret = gpmc_probe_onenand_child(pdev, child); > >> + of_node_put(child); > >> + if (ret < 0) > >> + return ret; > >> + } > > > > for_each_node_by_name automatically calls of_node_put on each node once passed, > > and as far as I can tell, gpmc_probe_onenand_child doesn't do anything that'd > > increment a node's refcount. > > > > As far as I can see, you only need the of_node_put in the error case: > > > > for_each_node_by_name(child, "onenand") { > > ret = gpmc_probe_onenand_child(pdev, child); > > if (ret < 0) { > > of_node_put(child); > > return ret; > > } > > } > > > > Have I missed something here? > > > > Mmm... perhaps I've overlooked that code. > > After some digging through source and reading for_each_node_by_name() > it seems to me you're right. > > @Daniel: It seems this would also apply to the NAND binding. > What do you think? Would prefer this done as a fix against the omap-for-v3.9/gpmc branch before we apply Ezequiel's patches. Regards, Tony
Hi Tony, Mark, Ezequiel, Tony Lindgren <tony@atomide.com> wrote: >* Ezequiel Garcia <elezegarcia@gmail.com> [130121 09:00]: >> Hi Mark, >> >> On Mon, Jan 21, 2013 at 9:30 AM, Mark Rutland <mark.rutland@arm.com> >wrote: >> > [...] >> > >> >> diff --git a/arch/arm/mach-omap2/gpmc.c >b/arch/arm/mach-omap2/gpmc.c >> >> index 01ce462..f7de9eb 100644 >> >> --- a/arch/arm/mach-omap2/gpmc.c >> >> +++ b/arch/arm/mach-omap2/gpmc.c >> >> @@ -39,6 +39,7 @@ >> >> #include "omap_device.h" >> >> #include "gpmc.h" >> >> #include "gpmc-nand.h" >> >> +#include "gpmc-onenand.h" >> >> >> >> #define DEVICE_NAME "omap-gpmc" >> >> >> >> @@ -1259,6 +1260,43 @@ static int gpmc_probe_nand_child(struct >platform_device *pdev, >> >> } >> >> #endif >> >> >> >> +#ifdef CONFIG_MTD_ONENAND >> >> +static int gpmc_probe_onenand_child(struct platform_device *pdev, >> >> + struct device_node *child) >> >> +{ >> >> + u32 val; >> >> + struct omap_onenand_platform_data *gpmc_onenand_data; >> >> + >> >> + if (of_property_read_u32(child, "reg", &val) < 0) { >> >> + dev_err(&pdev->dev, "%s has no 'reg' property\n", >> >> + child->full_name); >> >> + return -ENODEV; >> >> + } >> >> + >> >> + gpmc_onenand_data = devm_kzalloc(&pdev->dev, >sizeof(*gpmc_onenand_data), >> >> + GFP_KERNEL); >> >> + if (!gpmc_onenand_data) >> >> + return -ENOMEM; >> >> + >> >> + gpmc_onenand_data->cs = val; >> >> + gpmc_onenand_data->of_node = child; >> >> + gpmc_onenand_data->dma_channel = -1; >> >> + >> >> + if (!of_property_read_u32(child, "dma-channel", &val)) >> >> + gpmc_onenand_data->dma_channel = val; >> >> + >> >> + gpmc_onenand_init(gpmc_onenand_data); >> >> + >> >> + return 0; >> >> +} >> >> +#else >> >> +static int gpmc_probe_onenand_child(struct platform_device *pdev, >> >> + struct device_node *child) >> >> +{ >> >> + return 0; >> >> +} >> >> +#endif >> >> + >> >> static int gpmc_probe_dt(struct platform_device *pdev) >> >> { >> >> int ret; >> >> @@ -1276,6 +1314,12 @@ static int gpmc_probe_dt(struct >platform_device *pdev) >> >> return ret; >> >> } >> >> >> > >> > This doesn't look right to me: >> > >> >> + for_each_node_by_name(child, "onenand") { >> >> + ret = gpmc_probe_onenand_child(pdev, child); >> >> + of_node_put(child); >> >> + if (ret < 0) >> >> + return ret; >> >> + } >> > >> > for_each_node_by_name automatically calls of_node_put on each node >once passed, >> > and as far as I can tell, gpmc_probe_onenand_child doesn't do >anything that'd >> > increment a node's refcount. >> > >> > As far as I can see, you only need the of_node_put in the error >case: >> > >> > for_each_node_by_name(child, "onenand") { >> > ret = gpmc_probe_onenand_child(pdev, child); >> > if (ret < 0) { >> > of_node_put(child); >> > return ret; >> > } >> > } >> > >> > Have I missed something here? >> > >> >> Mmm... perhaps I've overlooked that code. >> >> After some digging through source and reading for_each_node_by_name() >> it seems to me you're right. >> >> @Daniel: It seems this would also apply to the NAND binding. >> What do you think? > >Would prefer this done as a fix against the omap-for-v3.9/gpmc >branch before we apply Ezequiel's patches. I'm currently far away from my computer and can't prepare a patch for this, sorry. But I think you are right, so please just submit a patch for that, anyone :-) Best regards, Daniel
On Mon, Jan 21, 2013 at 10:32 PM, Daniel Mack <zonque@gmail.com> wrote: > Hi Tony, Mark, Ezequiel, > > Tony Lindgren <tony@atomide.com> wrote: > >>* Ezequiel Garcia <elezegarcia@gmail.com> [130121 09:00]: >>> Hi Mark, >>> >>> On Mon, Jan 21, 2013 at 9:30 AM, Mark Rutland <mark.rutland@arm.com> >>wrote: >>> > [...] >>> > >>> >> diff --git a/arch/arm/mach-omap2/gpmc.c >>b/arch/arm/mach-omap2/gpmc.c >>> >> index 01ce462..f7de9eb 100644 >>> >> --- a/arch/arm/mach-omap2/gpmc.c >>> >> +++ b/arch/arm/mach-omap2/gpmc.c >>> >> @@ -39,6 +39,7 @@ >>> >> #include "omap_device.h" >>> >> #include "gpmc.h" >>> >> #include "gpmc-nand.h" >>> >> +#include "gpmc-onenand.h" >>> >> >>> >> #define DEVICE_NAME "omap-gpmc" >>> >> >>> >> @@ -1259,6 +1260,43 @@ static int gpmc_probe_nand_child(struct >>platform_device *pdev, >>> >> } >>> >> #endif >>> >> >>> >> +#ifdef CONFIG_MTD_ONENAND >>> >> +static int gpmc_probe_onenand_child(struct platform_device *pdev, >>> >> + struct device_node *child) >>> >> +{ >>> >> + u32 val; >>> >> + struct omap_onenand_platform_data *gpmc_onenand_data; >>> >> + >>> >> + if (of_property_read_u32(child, "reg", &val) < 0) { >>> >> + dev_err(&pdev->dev, "%s has no 'reg' property\n", >>> >> + child->full_name); >>> >> + return -ENODEV; >>> >> + } >>> >> + >>> >> + gpmc_onenand_data = devm_kzalloc(&pdev->dev, >>sizeof(*gpmc_onenand_data), >>> >> + GFP_KERNEL); >>> >> + if (!gpmc_onenand_data) >>> >> + return -ENOMEM; >>> >> + >>> >> + gpmc_onenand_data->cs = val; >>> >> + gpmc_onenand_data->of_node = child; >>> >> + gpmc_onenand_data->dma_channel = -1; >>> >> + >>> >> + if (!of_property_read_u32(child, "dma-channel", &val)) >>> >> + gpmc_onenand_data->dma_channel = val; >>> >> + >>> >> + gpmc_onenand_init(gpmc_onenand_data); >>> >> + >>> >> + return 0; >>> >> +} >>> >> +#else >>> >> +static int gpmc_probe_onenand_child(struct platform_device *pdev, >>> >> + struct device_node *child) >>> >> +{ >>> >> + return 0; >>> >> +} >>> >> +#endif >>> >> + >>> >> static int gpmc_probe_dt(struct platform_device *pdev) >>> >> { >>> >> int ret; >>> >> @@ -1276,6 +1314,12 @@ static int gpmc_probe_dt(struct >>platform_device *pdev) >>> >> return ret; >>> >> } >>> >> >>> > >>> > This doesn't look right to me: >>> > >>> >> + for_each_node_by_name(child, "onenand") { >>> >> + ret = gpmc_probe_onenand_child(pdev, child); >>> >> + of_node_put(child); >>> >> + if (ret < 0) >>> >> + return ret; >>> >> + } >>> > >>> > for_each_node_by_name automatically calls of_node_put on each node >>once passed, >>> > and as far as I can tell, gpmc_probe_onenand_child doesn't do >>anything that'd >>> > increment a node's refcount. >>> > >>> > As far as I can see, you only need the of_node_put in the error >>case: >>> > >>> > for_each_node_by_name(child, "onenand") { >>> > ret = gpmc_probe_onenand_child(pdev, child); >>> > if (ret < 0) { >>> > of_node_put(child); >>> > return ret; >>> > } >>> > } >>> > >>> > Have I missed something here? >>> > >>> >>> Mmm... perhaps I've overlooked that code. >>> >>> After some digging through source and reading for_each_node_by_name() >>> it seems to me you're right. >>> >>> @Daniel: It seems this would also apply to the NAND binding. >>> What do you think? >> >>Would prefer this done as a fix against the omap-for-v3.9/gpmc >>branch before we apply Ezequiel's patches. > > I'm currently far away from my computer and can't prepare a patch for this, sorry. But I think you are right, so please just submit a patch for that, anyone :-) > Ok, I'll try to submit a patch as soon as possible. If anyone wants to do it instead, fine by me.
* Ezequiel Garcia <elezegarcia@gmail.com> [130122 10:17]: > On Mon, Jan 21, 2013 at 10:32 PM, Daniel Mack <zonque@gmail.com> wrote: > > > > I'm currently far away from my computer and can't prepare a patch for this, sorry. But I think you are right, so please just submit a patch for that, anyone :-) > > > > Ok, I'll try to submit a patch as soon as possible. If anyone wants to > do it instead, fine by me. No please go ahead as it seems that you can easily test it too. Regards, Tony
On Tue, Jan 22, 2013 at 3:27 PM, Tony Lindgren <tony@atomide.com> wrote: > * Ezequiel Garcia <elezegarcia@gmail.com> [130122 10:17]: >> On Mon, Jan 21, 2013 at 10:32 PM, Daniel Mack <zonque@gmail.com> wrote: >> > >> > I'm currently far away from my computer and can't prepare a patch for this, sorry. But I think you are right, so please just submit a patch for that, anyone :-) >> > >> >> Ok, I'll try to submit a patch as soon as possible. If anyone wants to >> do it instead, fine by me. > > No please go ahead as it seems that you can easily test it too. > No problem. I now wonder if it's okey to exit upon probe failure. In particular, the for_each should be like this: for_each_node_by_name(child, "nand") { ret = gpmc_probe_nand_child(pdev, child); if (ret < 0) { of_node_put(child); return ret; } } or like this: for_each_node_by_name(child, "nand") { ret = gpmc_probe_nand_child(pdev, child); WARN_ON(ret < 0); } Ideas?
* Ezequiel Garcia <elezegarcia@gmail.com> [130122 11:46]: > On Tue, Jan 22, 2013 at 3:27 PM, Tony Lindgren <tony@atomide.com> wrote: > > * Ezequiel Garcia <elezegarcia@gmail.com> [130122 10:17]: > >> On Mon, Jan 21, 2013 at 10:32 PM, Daniel Mack <zonque@gmail.com> wrote: > >> > > >> > I'm currently far away from my computer and can't prepare a patch for this, sorry. But I think you are right, so please just submit a patch for that, anyone :-) > >> > > >> > >> Ok, I'll try to submit a patch as soon as possible. If anyone wants to > >> do it instead, fine by me. > > > > No please go ahead as it seems that you can easily test it too. > > > > No problem. > > I now wonder if it's okey to exit upon probe failure. > In particular, the for_each should be like this: > > for_each_node_by_name(child, "nand") { > ret = gpmc_probe_nand_child(pdev, child); > if (ret < 0) { > of_node_put(child); > return ret; > } > } > > or like this: > > for_each_node_by_name(child, "nand") { > ret = gpmc_probe_nand_child(pdev, child); > WARN_ON(ret < 0); > } > > Ideas? Well I would return and make sure the resources are freed. However, if this relates to using bootloader configured values for the few cases where we don't have the timing information for calculations available, then just doing a warning is the way to go. Regards, Tony
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt new file mode 100644 index 0000000..deec9da --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt @@ -0,0 +1,43 @@ +Device tree bindings for GPMC connected OneNANDs + +GPMC connected OneNAND (found on OMAP boards) are represented as child nodes of +the GPMC controller with a name of "onenand". + +All timing relevant properties as well as generic gpmc child properties are +explained in a separate documents - please refer to +Documentation/devicetree/bindings/bus/ti-gpmc.txt + +Required properties: + + - reg: The CS line the peripheral is connected to + +Optional properties: + + - dma-channel: DMA Channel index + +For inline partiton table parsing (optional): + + - #address-cells: should be set to 1 + - #size-cells: should be set to 1 + +Example for an OMAP3430 board: + + gpmc: gpmc@6e000000 { + compatible = "ti,omap3430-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x6e000000 0x1000000>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + #address-cells = <2>; + #size-cells = <1>; + + onenand@0 { + reg = <0 0 0>; /* CS0, offset 0 */ + + #address-cells = <1>; + #size-cells = <1>; + + /* partitions go here */ + }; + }; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 01ce462..f7de9eb 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -39,6 +39,7 @@ #include "omap_device.h" #include "gpmc.h" #include "gpmc-nand.h" +#include "gpmc-onenand.h" #define DEVICE_NAME "omap-gpmc" @@ -1259,6 +1260,43 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, } #endif +#ifdef CONFIG_MTD_ONENAND +static int gpmc_probe_onenand_child(struct platform_device *pdev, + struct device_node *child) +{ + u32 val; + struct omap_onenand_platform_data *gpmc_onenand_data; + + if (of_property_read_u32(child, "reg", &val) < 0) { + dev_err(&pdev->dev, "%s has no 'reg' property\n", + child->full_name); + return -ENODEV; + } + + gpmc_onenand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_onenand_data), + GFP_KERNEL); + if (!gpmc_onenand_data) + return -ENOMEM; + + gpmc_onenand_data->cs = val; + gpmc_onenand_data->of_node = child; + gpmc_onenand_data->dma_channel = -1; + + if (!of_property_read_u32(child, "dma-channel", &val)) + gpmc_onenand_data->dma_channel = val; + + gpmc_onenand_init(gpmc_onenand_data); + + return 0; +} +#else +static int gpmc_probe_onenand_child(struct platform_device *pdev, + struct device_node *child) +{ + return 0; +} +#endif + static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -1276,6 +1314,12 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } + for_each_node_by_name(child, "onenand") { + ret = gpmc_probe_onenand_child(pdev, child); + of_node_put(child); + if (ret < 0) + return ret; + } return 0; } #else
This patch adds device tree bindings for OMAP OneNAND devices. Tested on an OMAP3 3430 IGEPv2 board. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> --- Changes from v1: * Fix typo in Documentation/devicetree/bindings/mtd/gpmc-onenand.txt .../devicetree/bindings/mtd/gpmc-onenand.txt | 43 +++++++++++++++++++ arch/arm/mach-omap2/gpmc.c | 44 ++++++++++++++++++++ 2 files changed, 87 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/gpmc-onenand.txt