| Message ID | 1358766852-24503-1-git-send-email-coelho@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Luciano Coelho <coelho@ti.com> [130121 03:18]: > Add the UART2 muxing data to the board file (this used to be, > erroneously, done in the bootloader). > > Cc: stable <stable@vger.kernel.org> [3.7] > Signed-off-by: Luciano Coelho <coelho@ti.com> Thanks applying into omap-for-v3.8-rc4/fixes. Regards, Tony > --- > arch/arm/mach-omap2/board-omap4panda.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c > index 5c8e9ce..769c1fe 100644 > --- a/arch/arm/mach-omap2/board-omap4panda.c > +++ b/arch/arm/mach-omap2/board-omap4panda.c > @@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = { > OMAP_PULL_ENA), > OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), > > + /* UART2 - BT/FM/GPS shared transport */ > + OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0), > + OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), > + OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0), > + OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), > + > { .reg_offset = OMAP_MUX_TERMINATOR }, > }; > > -- > 1.7.10.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 5c8e9ce..769c1fe 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP_PULL_ENA), OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + /* UART2 - BT/FM/GPS shared transport */ + OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + { .reg_offset = OMAP_MUX_TERMINATOR }, };
Add the UART2 muxing data to the board file (this used to be, erroneously, done in the bootloader). Cc: stable <stable@vger.kernel.org> [3.7] Signed-off-by: Luciano Coelho <coelho@ti.com> --- arch/arm/mach-omap2/board-omap4panda.c | 6 ++++++ 1 file changed, 6 insertions(+)