@@ -186,6 +186,15 @@
reg = <0x7b00000 0x500000>;
};
};
+
+ smi0: mdio@72000 {
+ status = "ok";
+ };
+
+ egiga0 {
+ phy_addr = <0x88>;
+ status = "ok";
+ };
};
regulators {
@@ -60,6 +60,14 @@
reg = <0x0500000 0xfb00000>;
};
};
+
+ smi0: mdio@72000 {
+ status = "ok";
+ };
+
+ egiga0 {
+ status = "ok";
+ };
};
gpio-leds {
compatible = "gpio-leds";
@@ -81,6 +81,22 @@
status = "okay";
/* No CD or WP GPIOs */
};
+
+ smi0: mdio@72000 {
+ status = "ok";
+ };
+
+ smi1: mdio@76000 {
+ status = "ok";
+ };
+
+ egiga0 {
+ status = "ok";
+ };
+
+ egiga1 {
+ status = "ok";
+ };
};
gpio-leds {
@@ -106,6 +106,13 @@
nr-ports = <2>;
};
+ smi0: mdio@72000 {
+ status = "ok";
+ };
+
+ egiga0 {
+ status = "ok";
+ };
};
gpio-leds {
compatible = "gpio-leds";
@@ -79,6 +79,15 @@
};
};
+
+ smi0: mdio@72000 {
+ status = "ok";
+ };
+
+ egiga0 {
+ phy_addr = <0x88>;
+ status = "ok";
+ };
};
gpio_keys {
@@ -110,6 +110,15 @@
reg = <0x980000 0x1f400000>;
};
};
+
+ smi0: mdio@72000 {
+ status = "ok";
+ };
+
+ egiga0 {
+ phy_addr = <0x91>;
+ status = "ok";
+ };
};
gpio-leds {
@@ -42,5 +42,13 @@
status = "ok";
chip-delay = <25>;
};
+
+ smi0: mdio@72000 {
+ status = "ok";
+ };
+
+ egiga0 {
+ status = "ok";
+ };
};
};
@@ -106,6 +106,24 @@
};
};
};
+
+ smi0: mdio@72000 {
+ status = "ok";
+ };
+
+ smi1: mdio@76000 {
+ status = "ok";
+ };
+
+ egiga0 {
+ phy_addr = <0x80>;
+ status = "ok";
+ };
+
+ egiga1 {
+ phy_addr = <0x88>;
+ status = "ok";
+ };
};
gpio_keys {
@@ -140,6 +140,24 @@
cd-gpios = <&gpio1 15 0>;
/* No WP GPIO */
};
+
+ smi0: mdio@72000 {
+ status = "ok";
+ };
+
+ smi1: mdio@76000 {
+ status = "ok";
+ };
+
+ egiga0 {
+ phy_addr = <0x81>;
+ status = "ok";
+ };
+
+ egiga1 {
+ phy_addr = <0x82>;
+ status = "ok";
+ };
};
gpio-leds {
@@ -54,6 +54,15 @@
reg = <0x50>;
};
};
+
+ smi0: mdio@72000 {
+ status = "ok";
+ };
+
+ egiga0 {
+ phy_addr = <0x88>;
+ status = "ok";
+ };
};
gpio_keys {
@@ -16,6 +16,11 @@
status = "okay";
nr-ports = <1>;
};
+
+ egiga0 {
+ phy_addr = <0x80>;
+ status = "ok";
+ };
};
gpio-leds {
@@ -16,6 +16,11 @@
status = "okay";
nr-ports = <1>;
};
+
+ egiga0 {
+ phy_addr = <0x80>;
+ status = "ok";
+ };
};
gpio_fan {
@@ -191,6 +191,14 @@
marvell,function = "gpio";
};
};
+
+ smi0: mdio@72000 {
+ status = "ok";
+ };
+
+ egiga0 {
+ status = "ok";
+ };
};
gpio-leds {
@@ -156,6 +156,14 @@
i2c@11000 {
status = "ok";
};
+
+ smi0: mdio@72000 {
+ status = "ok";
+ };
+
+ egiga0 {
+ status = "ok";
+ };
};
gpio-leds {
@@ -201,5 +201,43 @@
clocks = <&gate_clk 4>;
status = "disabled";
};
+
+ smi0: mdio@72000 {
+ compatible = "marvell,mdio-mv643xx";
+ reg = <0x72000 0x4000>;
+ interrupts = <46>;
+ tx_csum_limit = <1600>;
+ status = "disabled";
+ };
+
+ smi1: mdio@76000 {
+ compatible = "marvell,mdio-mv643xx";
+ reg = <0x76000 0x4000>;
+ interrupts = <47>;
+ tx_csum_limit = <1600>;
+ status = "disabled";
+ };
+
+ egiga0 {
+ compatible = "marvell,mv643xx-eth";
+ reg = <0x72000 0x4000>;
+ mdio = <&smi0>;
+ port_number = <0>;
+ phy_addr = <0x80>;
+ interrupts = <11>;
+ clocks = <&gate_clk 0>;
+ status = "disabled";
+ };
+
+ egiga1 {
+ compatible = "marvell,mv643xx-eth";
+ reg = <0x76000 0x4000>;
+ mdio = <&smi1>;
+ port_number = <0>;
+ phy_addr = <0x81>;
+ interrupts = <15>;
+ clocks = <&gate_clk 19>;
+ status = "disabled";
+ };
};
};
@@ -48,6 +48,7 @@ config ARCH_KIRKWOOD_DT
bool "Marvell Kirkwood Flattened Device Tree"
select POWER_SUPPLY
select POWER_RESET
+ select POWER_RESET_RESTART
select POWER_RESET_GPIO
select REGULATOR
select REGULATOR_FIXED_VOLTAGE
@@ -58,19 +59,6 @@ config ARCH_KIRKWOOD_DT
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
-config MACH_DREAMPLUG_DT
- bool "Marvell DreamPlug (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Marvell DreamPlug (Flattened Device Tree).
-
-config MACH_ICONNECT_DT
- bool "Iomega Iconnect (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here to enable Iomega Iconnect support.
-
config MACH_DLINK_KIRKWOOD_DT
bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -79,14 +67,6 @@ config MACH_DLINK_KIRKWOOD_DT
Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
using Flattened Device Tree.
-config MACH_IB62X0_DT
- bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
- Flattened Device Tree.
-
config MACH_TS219_DT
bool "Device Tree for QNAP TS-11X, TS-21X NAS"
select ARCH_KIRKWOOD_DT
@@ -102,29 +82,6 @@ config MACH_TS219_DT
or MV6282. If you have the wrong one, the buttons will not
work.
-config MACH_DOCKSTAR_DT
- bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Seagate FreeAgent Dockstar (Flattened Device Tree).
-
-config MACH_GOFLEXNET_DT
- bool "Seagate GoFlex Net (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Seagate GoFlex Net (Flattened Device Tree).
-
-config MACH_LSXL_DT
- bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- select POWER_RESET_RESTART
- help
- Say 'Y' here if you want your kernel to support the
- Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
- Flattened Device Tree.
-
config MACH_IOMEGA_IX2_200_DT
bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -139,63 +96,6 @@ config MACH_KM_KIRKWOOD_DT
Say 'Y' here if you want your kernel to support the
Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
-config MACH_INETSPACE_V2_DT
- bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the LaCie
- Internet Space v2 NAS, using Flattened Device Tree.
-
-config MACH_MPLCEC4_DT
- bool "MPL CEC4 (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- MPL CEC4 (Flattened Device Tree).
-
-config MACH_NETSPACE_V2_DT
- bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the LaCie
- Network Space v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_MAX_V2_DT
- bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the LaCie
- Network Space Max v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_LITE_V2_DT
- bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the LaCie
- Network Space Lite v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_MINI_V2_DT
- bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the LaCie
- Network Space Mini v2 NAS (aka SafeBox), using Flattened
- Device Tree.
-
-config MACH_OPENBLOCKS_A6_DT
- bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Plat'Home OpenBlocks A6 (Flattened Device Tree).
-
-config MACH_TOPKICK_DT
- bool "USI Topkick (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- USI Topkick, using Flattened Device Tree
-
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
@@ -20,21 +20,7 @@ obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
-obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
-obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
-obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
-obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
-obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o
-obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o
obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o
-obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o
-obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o
-obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o
-obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o
-obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o
@@ -14,14 +14,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
-static struct mv643xx_eth_platform_data dnskw_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
/* Register any GPIO for output and set the value */
static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
{
@@ -36,8 +31,6 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
void __init dnskw_init(void)
{
- kirkwood_ge00_init(&dnskw_ge00_data);
-
/* Set NAS to turn back on after a power failure */
dnskw_gpio_register(37, "dnskw:power:recover", 1);
}
deleted file mode 100644
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-dockstar.c
- *
- * Seagate FreeAgent Dockstar Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Copied and modified for Seagate GoFlex Net support by
- * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
- * GoFlex kernel patches.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dockstar_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init dockstar_dt_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&dockstar_ge00_data);
-}
deleted file mode 100644
@@ -1,35 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-dreamplug.c
- *
- * Marvell DreamPlug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(1),
-};
-
-void __init dreamplug_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&dreamplug_ge00_data);
- kirkwood_ge01_init(&dreamplug_ge01_data);
-}
@@ -118,52 +118,18 @@ static void __init kirkwood_dt_init(void)
kexec_reinit = kirkwood_enable_pcie;
#endif
- if (of_machine_is_compatible("globalscale,dreamplug"))
- dreamplug_init();
-
if (of_machine_is_compatible("dlink,dns-kirkwood"))
dnskw_init();
- if (of_machine_is_compatible("iom,iconnect"))
- iconnect_init();
-
- if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
- ib62x0_init();
-
if (of_machine_is_compatible("qnap,ts219"))
qnap_dt_ts219_init();
- if (of_machine_is_compatible("seagate,dockstar"))
- dockstar_dt_init();
-
- if (of_machine_is_compatible("seagate,goflexnet"))
- goflexnet_init();
-
- if (of_machine_is_compatible("buffalo,lsxl"))
- lsxl_init();
-
if (of_machine_is_compatible("iom,ix2-200"))
iomega_ix2_200_init();
if (of_machine_is_compatible("keymile,km_kirkwood"))
km_kirkwood_init();
- if (of_machine_is_compatible("lacie,inetspace_v2") ||
- of_machine_is_compatible("lacie,netspace_v2") ||
- of_machine_is_compatible("lacie,netspace_max_v2") ||
- of_machine_is_compatible("lacie,netspace_lite_v2") ||
- of_machine_is_compatible("lacie,netspace_mini_v2"))
- ns2_init();
-
- if (of_machine_is_compatible("mpl,cec4"))
- mplcec4_init();
-
- if (of_machine_is_compatible("plathome,openblocks-a6"))
- openblocks_a6_init();
-
- if (of_machine_is_compatible("usi,topkick"))
- usi_topkick_init();
-
of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
}
deleted file mode 100644
@@ -1,34 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-goflexnet.c
- *
- * Seagate GoFlext Net Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Copied and modified for Seagate GoFlex Net support by
- * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
- * GoFlex kernel patches.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init goflexnet_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&goflexnet_ge00_data);
-}
deleted file mode 100644
@@ -1,29 +0,0 @@
-/*
- * Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com>
- *
- * arch/arm/mach-kirkwood/board-ib62x0.c
- *
- * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
- * converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init ib62x0_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&ib62x0_ge00_data);
-}
deleted file mode 100644
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-iconnect.c
- *
- * Iomega i-connect Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(11),
-};
-
-void __init iconnect_init(void)
-{
- kirkwood_ge00_init(&iconnect_ge00_data);
-}
@@ -14,15 +14,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
#include <linux/clk.h>
#include <linux/clk-private.h>
#include "common.h"
-static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
void __init km_kirkwood_init(void)
{
struct clk *sata_clk;
@@ -39,6 +34,4 @@ void __init km_kirkwood_init(void)
sata_clk = clk_get_sys("sata_mv.0", "1");
if (!IS_ERR(sata_clk))
sata_clk->flags |= CLK_IGNORE_UNUSED;
-
- kirkwood_ge00_init(&km_kirkwood_ge00_data);
}
deleted file mode 100644
@@ -1,36 +0,0 @@
-/*
- * Copyright 2012 (C), Michael Walle <michael@walle.cc>
- *
- * arch/arm/mach-kirkwood/board-lsxl.c
- *
- * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not
- * converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data lsxl_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data lsxl_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init lsxl_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
-
- kirkwood_ge00_init(&lsxl_ge00_data);
- kirkwood_ge01_init(&lsxl_ge01_data);
-}
deleted file mode 100644
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2012 MPL AG, Switzerland
- * Stefan Peter <s.peter@mpl.ch>
- *
- * arch/arm/mach-kirkwood/board-mplcec4.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(2),
-};
-
-void __init mplcec4_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&mplcec4_ge00_data);
- kirkwood_ge01_init(&mplcec4_ge01_data);
-}
-
-
-
deleted file mode 100644
@@ -1,34 +0,0 @@
-/*
- * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
- *
- * arch/arm/mach-kirkwood/board-ns2.c
- *
- * LaCie Network Space v2 board (and parents) initialization for drivers
- * not converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data ns2_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init ns2_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
- of_machine_is_compatible("lacie,netspace_mini_v2"))
- ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- kirkwood_ge00_init(&ns2_ge00_data);
-}
deleted file mode 100644
@@ -1,26 +0,0 @@
-/*
- * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * arch/arm/mach-kirkwood/board-openblocks_a6.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data openblocks_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init openblocks_a6_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&openblocks_ge00_data);
-}
deleted file mode 100644
@@ -1,29 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-usi_topkick.c
- *
- * USI Topkick Init for drivers not converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data topkick_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init usi_topkick_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&topkick_ge00_data);
-}
@@ -55,11 +55,6 @@ void kirkwood_restart(char, const char *);
void kirkwood_clk_init(void);
/* board init functions for boards not fully converted to fdt */
-#ifdef CONFIG_MACH_DREAMPLUG_DT
-void dreamplug_init(void);
-#else
-static inline void dreamplug_init(void) {};
-#endif
#ifdef CONFIG_MACH_TS219_DT
void qnap_dt_ts219_init(void);
#else
@@ -72,36 +67,6 @@ void dnskw_init(void);
static inline void dnskw_init(void) {};
#endif
-#ifdef CONFIG_MACH_ICONNECT_DT
-void iconnect_init(void);
-#else
-static inline void iconnect_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_IB62X0_DT
-void ib62x0_init(void);
-#else
-static inline void ib62x0_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_DOCKSTAR_DT
-void dockstar_dt_init(void);
-#else
-static inline void dockstar_dt_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_GOFLEXNET_DT
-void goflexnet_init(void);
-#else
-static inline void goflexnet_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_LSXL_DT
-void lsxl_init(void);
-#else
-static inline void lsxl_init(void) {};
-#endif
-
#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
void iomega_ix2_200_init(void);
#else
@@ -114,34 +79,6 @@ void km_kirkwood_init(void);
static inline void km_kirkwood_init(void) {};
#endif
-#ifdef CONFIG_MACH_MPLCEC4_DT
-void mplcec4_init(void);
-#else
-static inline void mplcec4_init(void) {};
-#endif
-
-#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
- defined(CONFIG_MACH_NETSPACE_V2_DT) || \
- defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
- defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \
- defined(CONFIG_MACH_NETSPACE_MINI_V2_DT)
-void ns2_init(void);
-#else
-static inline void ns2_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT
-void openblocks_a6_init(void);
-#else
-static inline void openblocks_a6_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_TOPKICK_DT
-void usi_topkick_init(void);
-#else
-static inline void usi_topkick_init(void) {};
-#endif
-
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
Tested on the dreamplug: mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 libphy: mv643xx_eth smi: probed libphy: mv643xx_eth smi: probed mv643xx_eth_port f1072000.egiga0 eth0: port 0 with MAC address XX:XX:XX... mv643xx_eth_port f1076000.egiga1 eth1: port 0 with MAC address XX:XX:XX... Successfully pulled an ip address and pinged through the interface Signed-off-by: Jason Cooper <jason@lakedaemon.net> --- arch/arm/boot/dts/kirkwood-dnskw.dtsi | 9 +++ arch/arm/boot/dts/kirkwood-dockstar.dts | 8 +++ arch/arm/boot/dts/kirkwood-dreamplug.dts | 16 +++++ arch/arm/boot/dts/kirkwood-goflexnet.dts | 7 ++ arch/arm/boot/dts/kirkwood-ib62x0.dts | 9 +++ arch/arm/boot/dts/kirkwood-iconnect.dts | 9 +++ arch/arm/boot/dts/kirkwood-km_kirkwood.dts | 8 +++ arch/arm/boot/dts/kirkwood-lsxl.dtsi | 18 +++++ arch/arm/boot/dts/kirkwood-mplcec4.dts | 18 +++++ arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 9 +++ arch/arm/boot/dts/kirkwood-ns2lite.dts | 5 ++ arch/arm/boot/dts/kirkwood-ns2mini.dts | 5 ++ arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 8 +++ arch/arm/boot/dts/kirkwood-topkick.dts | 8 +++ arch/arm/boot/dts/kirkwood.dtsi | 38 ++++++++++ arch/arm/mach-kirkwood/Kconfig | 102 +-------------------------- arch/arm/mach-kirkwood/Makefile | 14 ---- arch/arm/mach-kirkwood/board-dnskw.c | 7 -- arch/arm/mach-kirkwood/board-dockstar.c | 32 --------- arch/arm/mach-kirkwood/board-dreamplug.c | 35 --------- arch/arm/mach-kirkwood/board-dt.c | 34 --------- arch/arm/mach-kirkwood/board-goflexnet.c | 34 --------- arch/arm/mach-kirkwood/board-ib62x0.c | 29 -------- arch/arm/mach-kirkwood/board-iconnect.c | 23 ------ arch/arm/mach-kirkwood/board-km_kirkwood.c | 7 -- arch/arm/mach-kirkwood/board-lsxl.c | 36 ---------- arch/arm/mach-kirkwood/board-mplcec4.c | 35 --------- arch/arm/mach-kirkwood/board-ns2.c | 34 --------- arch/arm/mach-kirkwood/board-openblocks_a6.c | 26 ------- arch/arm/mach-kirkwood/board-usi_topkick.c | 29 -------- arch/arm/mach-kirkwood/common.h | 63 ----------------- 31 files changed, 176 insertions(+), 539 deletions(-) delete mode 100644 arch/arm/mach-kirkwood/board-dockstar.c delete mode 100644 arch/arm/mach-kirkwood/board-dreamplug.c delete mode 100644 arch/arm/mach-kirkwood/board-goflexnet.c delete mode 100644 arch/arm/mach-kirkwood/board-ib62x0.c delete mode 100644 arch/arm/mach-kirkwood/board-iconnect.c delete mode 100644 arch/arm/mach-kirkwood/board-lsxl.c delete mode 100644 arch/arm/mach-kirkwood/board-mplcec4.c delete mode 100644 arch/arm/mach-kirkwood/board-ns2.c delete mode 100644 arch/arm/mach-kirkwood/board-openblocks_a6.c delete mode 100644 arch/arm/mach-kirkwood/board-usi_topkick.c