diff mbox

[5/5] mv643xx_eth: convert to use the Marvell Orion MDIO driver

Message ID 1359473048-26551-6-git-send-email-florian@openwrt.org (mailing list archive)
State New, archived
Headers show

Commit Message

Florian Fainelli Jan. 29, 2013, 3:24 p.m. UTC
This patch converts the Marvell MV643XX ethernet driver to use the
Marvell Orion MDIO driver. As a result, PowerPC and ARM platforms
registering the Marvell MV643XX ethernet driver are also updated to
register a Marvell Orion MDIO driver. This driver voluntarily overlaps
with the Marvell Ethernet shared registers because it will use a subset
of this shared register (shared_base + 0x4 - shared_base + 0x84). The
Ethernet driver is also updated to look up for a PHY device using the
Orion MDIO bus driver.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
 arch/arm/plat-orion/common.c               |   84 +++++++++++--
 arch/powerpc/platforms/chrp/pegasos_eth.c  |   20 +++
 arch/powerpc/sysdev/mv64x60_dev.c          |   14 ++-
 drivers/net/ethernet/marvell/Kconfig       |    1 +
 drivers/net/ethernet/marvell/mv643xx_eth.c |  187 ++--------------------------
 5 files changed, 113 insertions(+), 193 deletions(-)

Comments

Thomas Petazzoni Jan. 29, 2013, 4:01 p.m. UTC | #1
Dear Florian Fainelli,

On Tue, 29 Jan 2013 16:24:08 +0100, Florian Fainelli wrote:
> This patch converts the Marvell MV643XX ethernet driver to use the
> Marvell Orion MDIO driver. As a result, PowerPC and ARM platforms
> registering the Marvell MV643XX ethernet driver are also updated to
> register a Marvell Orion MDIO driver. This driver voluntarily overlaps
> with the Marvell Ethernet shared registers because it will use a subset
> of this shared register (shared_base + 0x4 - shared_base + 0x84). The
> Ethernet driver is also updated to look up for a PHY device using the
> Orion MDIO bus driver.
> 
> Signed-off-by: Florian Fainelli <florian@openwrt.org>
> ---
>  arch/arm/plat-orion/common.c               |   84 +++++++++++--

In this file, there was one "MV643XX_ETH_SHARED_NAME" platform_device
registered for each network interface. Why? If the driver is shared,
isn't the whole idea to register it only once?

In any case, one of the idea of separating the mvmdio driver from the
mvneta driver in the first place is that there should be only one
instance of the mvmdio device, even if there are multiple network
interfaces. The reason is that from a HW point of the view, the MDIO
unit is shared between the network interfaces. If you look at
armada-370-xp.dtsi, there is only one mvmdio device registered, and two
network interfaces (using the mvneta driver) that are registered (and
actually up to four network interfaces can exist, they are added by
some other .dtsi files depending on the specific SoC).

So I don't think there should be one instance of the mvmdio per network
interface.

Also, I am wondering what's left in this MV643XX_ETH_SHARED_NAME driver
once the MDIO stuff has been pulled out in a separate driver? I think
the whole point of this work should be to get rid of this
MV643XX_ETH_SHARED_NAME driver, no?

Thanks,

Thomas
Florian Fainelli Jan. 29, 2013, 4:27 p.m. UTC | #2
On 01/29/2013 05:01 PM, Thomas Petazzoni wrote:
> Dear Florian Fainelli,
>
> On Tue, 29 Jan 2013 16:24:08 +0100, Florian Fainelli wrote:
>> This patch converts the Marvell MV643XX ethernet driver to use the
>> Marvell Orion MDIO driver. As a result, PowerPC and ARM platforms
>> registering the Marvell MV643XX ethernet driver are also updated to
>> register a Marvell Orion MDIO driver. This driver voluntarily overlaps
>> with the Marvell Ethernet shared registers because it will use a subset
>> of this shared register (shared_base + 0x4 - shared_base + 0x84). The
>> Ethernet driver is also updated to look up for a PHY device using the
>> Orion MDIO bus driver.
>>
>> Signed-off-by: Florian Fainelli <florian@openwrt.org>
>> ---
>>   arch/arm/plat-orion/common.c               |   84 +++++++++++--
> In this file, there was one "MV643XX_ETH_SHARED_NAME" platform_device
> registered for each network interface. Why? If the driver is shared,
> isn't the whole idea to register it only once?
It looks like I introduced two redundant mvmdio instances as ge01 refers 
to the ge00 smi bus (the same applies to ge11 and ge10). Thanks for 
spotting this.

>
> In any case, one of the idea of separating the mvmdio driver from the
> mvneta driver in the first place is that there should be only one
> instance of the mvmdio device, even if there are multiple network
> interfaces. The reason is that from a HW point of the view, the MDIO
> unit is shared between the network interfaces. If you look at
> armada-370-xp.dtsi, there is only one mvmdio device registered, and two
> network interfaces (using the mvneta driver) that are registered (and
> actually up to four network interfaces can exist, they are added by
> some other .dtsi files depending on the specific SoC).
>
> So I don't think there should be one instance of the mvmdio per network
> interface.
>
> Also, I am wondering what's left in this MV643XX_ETH_SHARED_NAME driver
> once the MDIO stuff has been pulled out in a separate driver? I think
> the whole point of this work should be to get rid of this
> MV643XX_ETH_SHARED_NAME driver, no?

If you take a closer look at mv643xx_eth you will see that the "shared" 
driver still handles the mconf bus window configuration, which is not 
abstracted yet. Besides that, I would rather do it step by step.
--
Florian
Thomas Petazzoni Jan. 29, 2013, 4:46 p.m. UTC | #3
Dear Florian Fainelli,

On Tue, 29 Jan 2013 17:27:56 +0100, Florian Fainelli wrote:

> It looks like I introduced two redundant mvmdio instances as ge01
> refers to the ge00 smi bus (the same applies to ge11 and ge10).
> Thanks for spotting this.

Ok, good.

> If you take a closer look at mv643xx_eth you will see that the
> "shared" driver still handles the mconf bus window configuration,
> which is not abstracted yet.

Indeed, I've seen that. But I don't understand why it's done in the
mv643xx_eth_shared_probe(). The mbus window configuration registers are
per-network interface, so this call to mv643xx_eth_conf_mbus_windows()
could presumably be done in mv643xx_eth_probe().

At least in mvneta, we have the same registers, and we do their
initialization in the driver normal (and only) ->probe() routine.

> Besides that, I would rather do it step by step.

Yes, agreed. But I think it would be good to have followed patches that
progressively get rid of the shared driver thing, as it will help in
bringing a proper DT binding in the mv643xx_eth driver. But it
certainly doesn't need to be part of this specific patch.

Thanks,

Thomas
Jason Gunthorpe Jan. 29, 2013, 6:13 p.m. UTC | #4
On Tue, Jan 29, 2013 at 04:24:08PM +0100, Florian Fainelli wrote:
> This patch converts the Marvell MV643XX ethernet driver to use the
> Marvell Orion MDIO driver. As a result, PowerPC and ARM platforms
> registering the Marvell MV643XX ethernet driver are also updated to
> register a Marvell Orion MDIO driver. This driver voluntarily overlaps
> with the Marvell Ethernet shared registers because it will use a subset
> of this shared register (shared_base + 0x4 - shared_base + 0x84). The
> Ethernet driver is also updated to look up for a PHY device using the
> Orion MDIO bus driver.

Can you finish off this job by making the mv643xx_eth driver accept
the standard phy-handle OF property instead of using a phy address?

Ie the end result should be something like:

                smi0: mdio@72000 {
                        device_type = "mdio";
                        compatible = "marvell,orion-mdio";
                        reg = <0x72004 0x4>;

                        #address-cells = <1>;
                        #size-cells = <0>;
                        PHY1: ethernet-phy@1 {
                                reg = <1>;
                                device_type = "ethernet-phy";
                                phy-id = <0x01410e90>;
                        };
                };

                egiga0 {
                        device_type = "network";
                        compatible = "marvell,mv643xx-eth";
                        reg = <0x72000 0x4000>;
                        port_number = <0>;
                        phy-handle = <&PHY1>;
                        interrupts = <11>;
                        local-mac-address = [000000000002];  /* Filled by boot loader */
                };

Regards,
Jason
Florian Fainelli Jan. 29, 2013, 8:41 p.m. UTC | #5
Le mardi 29 janvier 2013 19:13:06, Jason Gunthorpe a écrit :
> On Tue, Jan 29, 2013 at 04:24:08PM +0100, Florian Fainelli wrote:
> > This patch converts the Marvell MV643XX ethernet driver to use the
> > Marvell Orion MDIO driver. As a result, PowerPC and ARM platforms
> > registering the Marvell MV643XX ethernet driver are also updated to
> > register a Marvell Orion MDIO driver. This driver voluntarily overlaps
> > with the Marvell Ethernet shared registers because it will use a subset
> > of this shared register (shared_base + 0x4 - shared_base + 0x84). The
> > Ethernet driver is also updated to look up for a PHY device using the
> > Orion MDIO bus driver.
> 
> Can you finish off this job by making the mv643xx_eth driver accept
> the standard phy-handle OF property instead of using a phy address?

I can certainly do that, at the same time we need to continue supporting the 
"old" platform device style registration without breaking them (PowerPC in 
particular, and the hopefully yet to be converted orion5x). So the phy_scan() 
as I modified it will probably still be there.

> 
> Ie the end result should be something like:
> 
>                 smi0: mdio@72000 {
>                         device_type = "mdio";
>                         compatible = "marvell,orion-mdio";
>                         reg = <0x72004 0x4>;
> 
>                         #address-cells = <1>;
>                         #size-cells = <0>;
>                         PHY1: ethernet-phy@1 {
>                                 reg = <1>;
>                                 device_type = "ethernet-phy";
>                                 phy-id = <0x01410e90>;
>                         };
>                 };
> 
>                 egiga0 {
>                         device_type = "network";
>                         compatible = "marvell,mv643xx-eth";
>                         reg = <0x72000 0x4000>;
>                         port_number = <0>;
>                         phy-handle = <&PHY1>;
>                         interrupts = <11>;
>                         local-mac-address = [000000000002];  /* Filled by
> boot loader */ };
> 
> Regards,
> Jason
diff mbox

Patch

diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 2d4b641..f9bc66e 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -238,6 +238,7 @@  static __init void ge_complete(
 	struct mv643xx_eth_shared_platform_data *orion_ge_shared_data,
 	struct resource *orion_ge_resource, unsigned long irq,
 	struct platform_device *orion_ge_shared,
+	struct platform_device *orion_ge_mvmdio,
 	struct mv643xx_eth_platform_data *eth_data,
 	struct platform_device *orion_ge)
 {
@@ -247,6 +248,7 @@  static __init void ge_complete(
 	orion_ge->dev.platform_data = eth_data;
 
 	platform_device_register(orion_ge_shared);
+	platform_device_register(orion_ge_mvmdio);
 	platform_device_register(orion_ge);
 }
 
@@ -258,8 +260,6 @@  struct mv643xx_eth_shared_platform_data orion_ge00_shared_data;
 static struct resource orion_ge00_shared_resources[] = {
 	{
 		.name	= "ge00 base",
-	}, {
-		.name	= "ge00 err irq",
 	},
 };
 
@@ -271,6 +271,19 @@  static struct platform_device orion_ge00_shared = {
 	},
 };
 
+static struct resource orion_ge00_mvmdio_resources[] = {
+	{
+		.name	= "ge00 mvmdio base",
+	}, {
+		.name	= "ge00 mvmdio err irq",
+	},
+};
+
+static struct platform_device orion_ge00_mvmdio = {
+	.name		= "orion-mdio",
+	.id		= 0,
+};
+
 static struct resource orion_ge00_resources[] = {
 	{
 		.name	= "ge00 irq",
@@ -295,10 +308,13 @@  void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+		       mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
+	fill_resources(&orion_ge00_mvmdio, orion_ge00_mvmdio_resources,
+			mapbase + 0x2004, 0x84 - 1, irq_err);
 	orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge00_shared_data,
 		    orion_ge00_resources, irq, &orion_ge00_shared,
+		    &orion_ge00_mvmdio,
 		    eth_data, &orion_ge00);
 }
 
@@ -312,9 +328,7 @@  struct mv643xx_eth_shared_platform_data orion_ge01_shared_data = {
 static struct resource orion_ge01_shared_resources[] = {
 	{
 		.name	= "ge01 base",
-	}, {
-		.name	= "ge01 err irq",
-	},
+	}
 };
 
 static struct platform_device orion_ge01_shared = {
@@ -325,6 +339,19 @@  static struct platform_device orion_ge01_shared = {
 	},
 };
 
+static struct resource orion_ge01_mvmdio_resources[] = {
+	{
+		.name	= "ge01 mdio base",
+	}, {
+		.name	= "ge01 mdio err irq",
+	},
+};
+
+static struct platform_device orion_ge01_mvmdio = {
+	.name		= "orion-mdio",
+	.id		= 1,
+};
+
 static struct resource orion_ge01_resources[] = {
 	{
 		.name	= "ge01 irq",
@@ -349,10 +376,13 @@  void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+		       mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
+	fill_resources(&orion_ge01_mvmdio, orion_ge01_mvmdio_resources,
+			mapbase + 0x2004, 0x84 - 1, irq_err);
 	orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge01_shared_data,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
+		    &orion_ge01_mvmdio,
 		    eth_data, &orion_ge01);
 }
 
@@ -366,9 +396,7 @@  struct mv643xx_eth_shared_platform_data orion_ge10_shared_data = {
 static struct resource orion_ge10_shared_resources[] = {
 	{
 		.name	= "ge10 base",
-	}, {
-		.name	= "ge10 err irq",
-	},
+	}
 };
 
 static struct platform_device orion_ge10_shared = {
@@ -379,6 +407,19 @@  static struct platform_device orion_ge10_shared = {
 	},
 };
 
+static struct resource orion_ge10_mvmdio_resources[] = {
+	{
+		.name	= "ge10 mvmdio base",
+	}, {
+		.name	= "ge10 mvmdio err irq",
+	},
+};
+
+static struct platform_device orion_ge10_mvmdio = {
+	.name		= "orion-mdio",
+	.id		= 1,
+};
+
 static struct resource orion_ge10_resources[] = {
 	{
 		.name	= "ge10 irq",
@@ -403,8 +444,11 @@  void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 {
 	fill_resources(&orion_ge10_shared, orion_ge10_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	fill_resources(&orion_ge10_mvmdio, orion_ge10_mvmdio_resources,
+		       mapbase + 0x2004, 0x84 - 1, irq_err);
 	ge_complete(&orion_ge10_shared_data,
 		    orion_ge10_resources, irq, &orion_ge10_shared,
+		    &orion_ge10_mvmdio,
 		    eth_data, &orion_ge10);
 }
 
@@ -418,8 +462,6 @@  struct mv643xx_eth_shared_platform_data orion_ge11_shared_data = {
 static struct resource orion_ge11_shared_resources[] = {
 	{
 		.name	= "ge11 base",
-	}, {
-		.name	= "ge11 err irq",
 	},
 };
 
@@ -431,6 +473,19 @@  static struct platform_device orion_ge11_shared = {
 	},
 };
 
+static struct resource orion_ge11_mvmdio_resources[] = {
+	{
+		.name	= "ge11 mvmdio base",
+	}, {
+		.name	= "ge11 mvmdio err irq",
+	},
+};
+
+static struct platform_device orion_ge11_mvmdio = {
+	.name		= "orion-mdio",
+	.id		= 1,
+};
+
 static struct resource orion_ge11_resources[] = {
 	{
 		.name	= "ge11 irq",
@@ -454,9 +509,12 @@  void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long irq_err)
 {
 	fill_resources(&orion_ge11_shared, orion_ge11_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+		       mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
+	fill_resources(&orion_ge11_mvmdio, orion_ge11_mvmdio_resources,
+		       mapbase + 0x2004, 0x84 - 1, irq_err);
 	ge_complete(&orion_ge11_shared_data,
 		    orion_ge11_resources, irq, &orion_ge11_shared,
+		    &orion_ge11_mvmdio,
 		    eth_data, &orion_ge11);
 }
 
diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c
index 039fc8e..a671508 100644
--- a/arch/powerpc/platforms/chrp/pegasos_eth.c
+++ b/arch/powerpc/platforms/chrp/pegasos_eth.c
@@ -47,6 +47,25 @@  static struct platform_device mv643xx_eth_shared_device = {
 	.resource	= mv643xx_eth_shared_resources,
 };
 
+/*
+ * The orion mdio driver only covers shared + 0x4 up to shared + 0x84 - 1
+ */
+static struct resource mv643xx_eth_mvmdio_resources[] = {
+	[0] = {
+		.name	= "ethernet mdio base",
+		.start	= 0xf1000000 + MV643XX_ETH_SHARED_REGS + 0x4,
+		.end	= 0xf1000000 + MV643XX_ETH_SHARED_REGS + 0x83,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device mv643xx_eth_mvmdio_device = {
+	.name		= "orion-mdio",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mv643xx_eth_mvmdio_resources),
+	.resource	= mv643xx_eth_shared_resources,
+};
+
 static struct resource mv643xx_eth_port1_resources[] = {
 	[0] = {
 		.name	= "eth port1 irq",
@@ -82,6 +101,7 @@  static struct platform_device eth_port1_device = {
 
 static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
 	&mv643xx_eth_shared_device,
+	&mv643xx_eth_mvmdio_device,
 	&eth_port1_device,
 };
 
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
index 0f6af41..630cea3 100644
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -214,15 +214,25 @@  static struct platform_device * __init mv64x60_eth_register_shared_pdev(
 						struct device_node *np, int id)
 {
 	struct platform_device *pdev;
-	struct resource r[1];
+	struct resource r[2];
 	int err;
 
 	err = of_address_to_resource(np, 0, &r[0]);
 	if (err)
 		return ERR_PTR(err);
 
+	/* register an orion mdio bus driver */
+	r[1].start = r[0].start + 0x4;
+	r[1].end = r[0].start + 0x84 - 1;
+	r[1].flags = IORESOURCE_MEM;
+
+	pdev = platform_device_register_simple("orion-mdio", id, &r[1], 1);
+	if (!pdev)
+		return pdev;
+
 	pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, id,
-					       r, 1);
+					       &r[0], 1);
+
 	return pdev;
 }
 
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index edfba93..df06061 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -23,6 +23,7 @@  config MV643XX_ETH
 	depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
 	select INET_LRO
 	select PHYLIB
+	select MVMDIO
 	---help---
 	  This driver supports the gigabit ethernet MACs in the
 	  Marvell Discovery PPC/MIPS chipset family (MV643XX) and
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index c27b23d8..8ef186f 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -67,14 +67,6 @@  static char mv643xx_eth_driver_version[] = "1.4";
  * Registers shared between all ports.
  */
 #define PHY_ADDR			0x0000
-#define SMI_REG				0x0004
-#define  SMI_BUSY			0x10000000
-#define  SMI_READ_VALID			0x08000000
-#define  SMI_OPCODE_READ		0x04000000
-#define  SMI_OPCODE_WRITE		0x00000000
-#define ERR_INT_CAUSE			0x0080
-#define  ERR_INT_SMI_DONE		0x00000010
-#define ERR_INT_MASK			0x0084
 #define WINDOW_BASE(w)			(0x0200 + ((w) << 3))
 #define WINDOW_SIZE(w)			(0x0204 + ((w) << 3))
 #define WINDOW_REMAP_HIGH(w)		(0x0280 + ((w) << 2))
@@ -264,25 +256,6 @@  struct mv643xx_eth_shared_private {
 	void __iomem *base;
 
 	/*
-	 * Points at the right SMI instance to use.
-	 */
-	struct mv643xx_eth_shared_private *smi;
-
-	/*
-	 * Provides access to local SMI interface.
-	 */
-	struct mii_bus *smi_bus;
-
-	/*
-	 * If we have access to the error interrupt pin (which is
-	 * somewhat misnamed as it not only reflects internal errors
-	 * but also reflects SMI completion), use that to wait for
-	 * SMI access completion instead of polling the SMI busy bit.
-	 */
-	int err_interrupt;
-	wait_queue_head_t smi_busy_wait;
-
-	/*
 	 * Per-port MBUS window access register value.
 	 */
 	u32 win_protect;
@@ -1080,98 +1053,6 @@  static void txq_set_fixed_prio_mode(struct tx_queue *txq)
 }
 
 
-/* mii management interface *************************************************/
-static irqreturn_t mv643xx_eth_err_irq(int irq, void *dev_id)
-{
-	struct mv643xx_eth_shared_private *msp = dev_id;
-
-	if (readl(msp->base + ERR_INT_CAUSE) & ERR_INT_SMI_DONE) {
-		writel(~ERR_INT_SMI_DONE, msp->base + ERR_INT_CAUSE);
-		wake_up(&msp->smi_busy_wait);
-		return IRQ_HANDLED;
-	}
-
-	return IRQ_NONE;
-}
-
-static int smi_is_done(struct mv643xx_eth_shared_private *msp)
-{
-	return !(readl(msp->base + SMI_REG) & SMI_BUSY);
-}
-
-static int smi_wait_ready(struct mv643xx_eth_shared_private *msp)
-{
-	if (msp->err_interrupt == NO_IRQ) {
-		int i;
-
-		for (i = 0; !smi_is_done(msp); i++) {
-			if (i == 10)
-				return -ETIMEDOUT;
-			msleep(10);
-		}
-
-		return 0;
-	}
-
-	if (!smi_is_done(msp)) {
-		wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp),
-				   msecs_to_jiffies(100));
-		if (!smi_is_done(msp))
-			return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-static int smi_bus_read(struct mii_bus *bus, int addr, int reg)
-{
-	struct mv643xx_eth_shared_private *msp = bus->priv;
-	void __iomem *smi_reg = msp->base + SMI_REG;
-	int ret;
-
-	if (smi_wait_ready(msp)) {
-		pr_warn("SMI bus busy timeout\n");
-		return -ETIMEDOUT;
-	}
-
-	writel(SMI_OPCODE_READ | (reg << 21) | (addr << 16), smi_reg);
-
-	if (smi_wait_ready(msp)) {
-		pr_warn("SMI bus busy timeout\n");
-		return -ETIMEDOUT;
-	}
-
-	ret = readl(smi_reg);
-	if (!(ret & SMI_READ_VALID)) {
-		pr_warn("SMI bus read not valid\n");
-		return -ENODEV;
-	}
-
-	return ret & 0xffff;
-}
-
-static int smi_bus_write(struct mii_bus *bus, int addr, int reg, u16 val)
-{
-	struct mv643xx_eth_shared_private *msp = bus->priv;
-	void __iomem *smi_reg = msp->base + SMI_REG;
-
-	if (smi_wait_ready(msp)) {
-		pr_warn("SMI bus busy timeout\n");
-		return -ETIMEDOUT;
-	}
-
-	writel(SMI_OPCODE_WRITE | (reg << 21) |
-		(addr << 16) | (val & 0xffff), smi_reg);
-
-	if (smi_wait_ready(msp)) {
-		pr_warn("SMI bus busy timeout\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-
 /* statistics ***************************************************************/
 static struct net_device_stats *mv643xx_eth_get_stats(struct net_device *dev)
 {
@@ -2611,47 +2492,6 @@  static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 		goto out_free;
 
 	/*
-	 * Set up and register SMI bus.
-	 */
-	if (pd == NULL || pd->shared_smi == NULL) {
-		msp->smi_bus = mdiobus_alloc();
-		if (msp->smi_bus == NULL)
-			goto out_unmap;
-
-		msp->smi_bus->priv = msp;
-		msp->smi_bus->name = "mv643xx_eth smi";
-		msp->smi_bus->read = smi_bus_read;
-		msp->smi_bus->write = smi_bus_write,
-		snprintf(msp->smi_bus->id, MII_BUS_ID_SIZE, "%s-%d",
-			pdev->name, pdev->id);
-		msp->smi_bus->parent = &pdev->dev;
-		msp->smi_bus->phy_mask = 0xffffffff;
-		if (mdiobus_register(msp->smi_bus) < 0)
-			goto out_free_mii_bus;
-		msp->smi = msp;
-	} else {
-		msp->smi = platform_get_drvdata(pd->shared_smi);
-	}
-
-	msp->err_interrupt = NO_IRQ;
-	init_waitqueue_head(&msp->smi_busy_wait);
-
-	/*
-	 * Check whether the error interrupt is hooked up.
-	 */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (res != NULL) {
-		int err;
-
-		err = request_irq(res->start, mv643xx_eth_err_irq,
-				  IRQF_SHARED, "mv643xx_eth", msp);
-		if (!err) {
-			writel(ERR_INT_SMI_DONE, msp->base + ERR_INT_MASK);
-			msp->err_interrupt = res->start;
-		}
-	}
-
-	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
 	 */
 	dram = mv_mbus_dram_info();
@@ -2666,10 +2506,6 @@  static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 
 	return 0;
 
-out_free_mii_bus:
-	mdiobus_free(msp->smi_bus);
-out_unmap:
-	iounmap(msp->base);
 out_free:
 	kfree(msp);
 out:
@@ -2679,14 +2515,7 @@  out:
 static int mv643xx_eth_shared_remove(struct platform_device *pdev)
 {
 	struct mv643xx_eth_shared_private *msp = platform_get_drvdata(pdev);
-	struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data;
 
-	if (pd == NULL || pd->shared_smi == NULL) {
-		mdiobus_unregister(msp->smi_bus);
-		mdiobus_free(msp->smi_bus);
-	}
-	if (msp->err_interrupt != NO_IRQ)
-		free_irq(msp->err_interrupt, msp);
 	iounmap(msp->base);
 	kfree(msp);
 
@@ -2752,11 +2581,11 @@  static void set_params(struct mv643xx_eth_private *mp,
 static struct phy_device *phy_scan(struct mv643xx_eth_private *mp,
 				   int phy_addr)
 {
-	struct mii_bus *bus = mp->shared->smi->smi_bus;
 	struct phy_device *phydev;
 	int start;
 	int num;
 	int i;
+	char phy_id[MII_BUS_ID_SIZE + 3];
 
 	if (phy_addr == MV643XX_ETH_PHY_ADDR_DEFAULT) {
 		start = phy_addr_get(mp) & 0x1f;
@@ -2766,17 +2595,19 @@  static struct phy_device *phy_scan(struct mv643xx_eth_private *mp,
 		num = 1;
 	}
 
+	/* Attempt to connect to the PHY using orion-mdio */
 	phydev = NULL;
 	for (i = 0; i < num; i++) {
 		int addr = (start + i) & 0x1f;
 
-		if (bus->phy_map[addr] == NULL)
-			mdiobus_scan(bus, addr);
+		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
+				"orion-mdio-mii", addr);
 
-		if (phydev == NULL) {
-			phydev = bus->phy_map[addr];
-			if (phydev != NULL)
-				phy_addr_set(mp, addr);
+		phydev = phy_connect(mp->dev, phy_id, NULL,
+				PHY_INTERFACE_MODE_GMII);
+		if (!IS_ERR(phydev)) {
+			phy_addr_set(mp, addr);
+			break;
 		}
 	}