| Message ID | 1240262886-24538-1-git-send-email-amit.kucheria@verdurent.com (mailing list archive) |
|---|---|
| State | Awaiting Upstream, archived |
| Headers | show |
Hi, > Whitespace-fixed version and passed through checkpatch.pl > > Check for return values of i2c read/write operations and size of scripts being > uploaded to TWL4030 > > Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Acked-by: Peter De Schrijver <peter.de-schrijver@nokia.com>
On Monday 20 April 2009, Amit Kucheria wrote: > Whitespace-fixed version and passed through checkpatch.pl > > Check for return values of i2c read/write operations and size of scripts being > uploaded to TWL4030 > > Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> > --- > drivers/mfd/twl4030-core.c | 2 +- > drivers/mfd/twl4030-power.c | 49 ++++++++++++++++++++++++++++++------------ The changes look OK ... but what this needs is to be split into two patches. The -core one should go to mainline; it's trivial, comment-only, unrelated to the $SUBJECT patch. The -power one seems OK for merge to the OMAP tree. (Of course, the -power driver should probably go mainline at some point. Once it stops breaking warm-reset!) > 2 files changed, 36 insertions(+), 15 deletions(-) > > diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c > index 769b34b..067b02e 100644 > --- a/drivers/mfd/twl4030-core.c > +++ b/drivers/mfd/twl4030-core.c > @@ -358,7 +358,7 @@ EXPORT_SYMBOL(twl4030_i2c_read); > int twl4030_i2c_write_u8(u8 mod_no, u8 value, u8 reg) > { > > - /* 2 bytes offset 1 contains the data offset 0 is used by i2c_write */ > + /* 2 bytes: offset 1 contains the data, offset 0 is used by i2c_write */ > u8 temp_buffer[2] = { 0 }; > /* offset 1 contains the data */ > temp_buffer[1] = value; > diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c > index 9dc493b..b4b636d 100644 > --- a/drivers/mfd/twl4030-power.c > +++ b/drivers/mfd/twl4030-power.c > @@ -257,36 +257,38 @@ static int __init config_warmreset_sequence(u8 address) > return err; > } > > -void twl4030_configure_resource(struct twl4030_resconfig *rconfig) > +static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) > { > int rconfig_addr; > + int err; > u8 type; > > if (rconfig->resource > NUM_OF_RESOURCES) { > printk(KERN_ERR > "TWL4030 Resource %d does not exist\n", > rconfig->resource); > - return; > + return -EINVAL; > } > > rconfig_addr = res_config_addrs[rconfig->resource]; > > /* Set resource group */ > - > if (rconfig->devgroup >= 0) > - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > rconfig->devgroup << 5, > rconfig_addr + DEVGROUP_OFFSET); > + if (err < 0) { > + printk(KERN_ERR "TWL4030 failed to program devgroup"); > + return err; > + } > > /* Set resource types */ > - > - if (twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, > - &type, > - rconfig_addr + TYPE_OFFSET) < 0) { > - printk(KERN_ERR > - "TWL4030 Resource %d type could not read\n", > + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, > + rconfig_addr + TYPE_OFFSET); > + if (err < 0) { > + printk(KERN_ERR "TWL4030 Resource %d type could not be read\n", > rconfig->resource); > - return; > + return err; > } > > if (rconfig->type >= 0) { > @@ -299,8 +301,14 @@ void twl4030_configure_resource(struct twl4030_resconfig *rconfig) > type |= rconfig->type2 << 3; > } > > - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > type, rconfig_addr + TYPE_OFFSET); > + if (err < 0) { > + printk(KERN_ERR "TWL4030 failed to program resource type"); > + return err; > + } > + > + return 0; > > } > > @@ -309,6 +317,12 @@ static int __init load_triton_script(struct twl4030_script *tscript) > u8 address = triton_next_free_address; > int err; > > + /* Make sure the script isn't going beyond last valid address */ > + if ((address + tscript->size) > (END_OF_SCRIPT-1)) { > + printk(KERN_ERR "TWL4030 script too big error\n"); > + return -EINVAL; > + } > + > err = twl4030_write_script(address, tscript->script, tscript->size); > if (err) > return err; > @@ -346,15 +360,22 @@ void __init twl4030_power_init(struct twl4030_power_data *triton2_scripts) > > for (i = 0; i < triton2_scripts->size; i++) { > err = load_triton_script(triton2_scripts->scripts[i]); > - if (err) > + if (err < 0) { > + printk(KERN_ERR "TWL4030 failed to load scripts"); > break; > + } > } > > resconfig = triton2_scripts->resource_config; > if (resconfig) { > while (resconfig->resource) { > - twl4030_configure_resource(resconfig); > + err = twl4030_configure_resource(resconfig); > resconfig++; > + if (err < 0) { > + printk(KERN_ERR > + "TWL4030 failed to configure resource"); > + break; > + } > } > } > > -- > 1.6.0.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index 769b34b..067b02e 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -358,7 +358,7 @@ EXPORT_SYMBOL(twl4030_i2c_read); int twl4030_i2c_write_u8(u8 mod_no, u8 value, u8 reg) { - /* 2 bytes offset 1 contains the data offset 0 is used by i2c_write */ + /* 2 bytes: offset 1 contains the data, offset 0 is used by i2c_write */ u8 temp_buffer[2] = { 0 }; /* offset 1 contains the data */ temp_buffer[1] = value; diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 9dc493b..b4b636d 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -257,36 +257,38 @@ static int __init config_warmreset_sequence(u8 address) return err; } -void twl4030_configure_resource(struct twl4030_resconfig *rconfig) +static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) { int rconfig_addr; + int err; u8 type; if (rconfig->resource > NUM_OF_RESOURCES) { printk(KERN_ERR "TWL4030 Resource %d does not exist\n", rconfig->resource); - return; + return -EINVAL; } rconfig_addr = res_config_addrs[rconfig->resource]; /* Set resource group */ - if (rconfig->devgroup >= 0) - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, rconfig->devgroup << 5, rconfig_addr + DEVGROUP_OFFSET); + if (err < 0) { + printk(KERN_ERR "TWL4030 failed to program devgroup"); + return err; + } /* Set resource types */ - - if (twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, - &type, - rconfig_addr + TYPE_OFFSET) < 0) { - printk(KERN_ERR - "TWL4030 Resource %d type could not read\n", + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, + rconfig_addr + TYPE_OFFSET); + if (err < 0) { + printk(KERN_ERR "TWL4030 Resource %d type could not be read\n", rconfig->resource); - return; + return err; } if (rconfig->type >= 0) { @@ -299,8 +301,14 @@ void twl4030_configure_resource(struct twl4030_resconfig *rconfig) type |= rconfig->type2 << 3; } - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, type, rconfig_addr + TYPE_OFFSET); + if (err < 0) { + printk(KERN_ERR "TWL4030 failed to program resource type"); + return err; + } + + return 0; } @@ -309,6 +317,12 @@ static int __init load_triton_script(struct twl4030_script *tscript) u8 address = triton_next_free_address; int err; + /* Make sure the script isn't going beyond last valid address */ + if ((address + tscript->size) > (END_OF_SCRIPT-1)) { + printk(KERN_ERR "TWL4030 script too big error\n"); + return -EINVAL; + } + err = twl4030_write_script(address, tscript->script, tscript->size); if (err) return err; @@ -346,15 +360,22 @@ void __init twl4030_power_init(struct twl4030_power_data *triton2_scripts) for (i = 0; i < triton2_scripts->size; i++) { err = load_triton_script(triton2_scripts->scripts[i]); - if (err) + if (err < 0) { + printk(KERN_ERR "TWL4030 failed to load scripts"); break; + } } resconfig = triton2_scripts->resource_config; if (resconfig) { while (resconfig->resource) { - twl4030_configure_resource(resconfig); + err = twl4030_configure_resource(resconfig); resconfig++; + if (err < 0) { + printk(KERN_ERR + "TWL4030 failed to configure resource"); + break; + } } }
Whitespace-fixed version and passed through checkpatch.pl Check for return values of i2c read/write operations and size of scripts being uploaded to TWL4030 Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> --- drivers/mfd/twl4030-core.c | 2 +- drivers/mfd/twl4030-power.c | 49 ++++++++++++++++++++++++++++++------------ 2 files changed, 36 insertions(+), 15 deletions(-)