@@ -56,6 +56,29 @@ For every fimc-lite node a numbered alias should be present in the aliases
node. Aliases are in form of fimc-lite<n>, where <n> is an integer (0...N)
specifying the IP's instance index.
+
+'parallel-ports' node
+---------------------
+
+This node should contain child 'port' nodes specifying active parallel video
+input ports. It includes camera A and camera B inputs. 'reg' property in the
+port nodes specifies data input - 0, 1 indicates input A, B respectively.
+
+Optional properties
+
+- samsung,camclk-out : specifies clock output for remote sensor,
+ 0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
+
+Image sensor nodes
+------------------
+
+The sensor device nodes should be added as their control bus controller
+(e.g. I2C0) child nodes and linked to a port node in the csis or parallel-ports
+node, using common the common video interfaces bindings, i.e. port/endpoint
+node pairs. The implementation of this binding requires clock-frequency
+property to be present in the sensor device nodes.
+
+
Example:
aliases {
@@ -63,12 +86,68 @@ Example:
fimc0 = &fimc_0;
};
+ /* Parallel bus IF sensor */
+ i2c_0: i2c@13860000 {
+ s5k6aa: sensor@3c {
+ compatible = "samsung,s5k6aafx";
+ reg = <0x3c>;
+ vddio-supply = <...>;
+
+ clock-frequency = <24000000>;
+ clocks = <...>;
+ clock-names = "mclk";
+
+ port {
+ s5k6aa_ep: endpoint {
+ remote-endpoint = <&fimc0_ep>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ hsync-active = <1>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+ };
+
+ /* MIPI CSI-2 bus IF sensor */
+ s5c73m3: sensor@0x1a {
+ compatible = "samsung,s5c73m3";
+ reg = <0x1a>;
+ vddio-supply = <...>;
+
+ clock-frequency = <24000000>;
+ clocks = <...>;
+ clock-names = "mclk";
+
+ port {
+ s5c73m3_1: endpoint {
+ data-lanes = <1>, <2>, <3>, <4>;
+ remote-endpoint = <&csis0_ep>;
+ };
+ };
+ };
+
camera {
compatible = "samsung,fimc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
+ /* parallel camera ports */
+ parallel-ports {
+ /* camera A input */
+ port@0 {
+ reg = <1>;
+ fimc0_ep: endpoint {
+ remote-endpoint = <&s5k6aa_ep>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ hsync-active = <1>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+
fimc_0: fimc@11800000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
@@ -81,6 +160,16 @@ Example:
reg = <0x11880000 0x1000>;
interrupts = <0 78 0>;
max-data-lanes = <4>;
+ /* camera C input */
+ port {
+ reg = <3>;
+ csis0_ep: endpoint {
+ remote-endpoint = <&s5c73m3_ep>;
+ data-lanes = <1>, <2>, <3>, <4>;
+ samsung,csis-hs-settle = <12>;
+ samsung,camclk-out = <0>;
+ };
+ };
};
};
@@ -19,11 +19,14 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_i2c.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
#include <media/media-device.h>
#include <media/s5p_fimc.h>
@@ -248,7 +251,7 @@ static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd,
sd->grp_id = GRP_ID_SENSOR;
v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice %s\n",
- s_info->pdata.board_info->type);
+ sd->name);
return sd;
}
@@ -260,17 +263,185 @@ static void fimc_md_unregister_sensor(struct v4l2_subdev *sd)
if (!client)
return;
v4l2_device_unregister_subdev(sd);
- adapter = client->adapter;
- i2c_unregister_device(client);
- if (adapter)
- i2c_put_adapter(adapter);
+
+ if (!client->dev.of_node) {
+ adapter = client->adapter;
+ i2c_unregister_device(client);
+ if (adapter)
+ i2c_put_adapter(adapter);
+ }
+}
+
+#ifdef CONFIG_OF
+/* Register I2C client subdev associated with @node. */
+static int fimc_md_of_add_sensor(struct fimc_md *fmd,
+ struct device_node *node, int index)
+{
+ struct fimc_sensor_info *si;
+ struct i2c_client *client;
+ struct v4l2_subdev *sd;
+ int ret;
+
+ if (WARN_ON(index >= ARRAY_SIZE(fmd->sensor)))
+ return -EINVAL;
+ si = &fmd->sensor[index];
+
+ client = of_find_i2c_device_by_node(node);
+ if (!client)
+ return -EPROBE_DEFER;
+
+ device_lock(&client->dev);
+
+ if (!client->driver ||
+ !try_module_get(client->driver->driver.owner)) {
+ ret = -EPROBE_DEFER;
+ goto dev_put;
+ }
+
+ /* Enable sensor's master clock */
+ ret = __fimc_md_set_camclk(fmd, si, true);
+ if (ret < 0)
+ goto mod_put;
+ sd = i2c_get_clientdata(client);
+
+ ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
+ __fimc_md_set_camclk(fmd, si, false);
+ if (ret < 0)
+ goto mod_put;
+
+ v4l2_set_subdev_hostdata(sd, si);
+ sd->grp_id = GRP_ID_SENSOR;
+ si->subdev = sd;
+ v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice: %s (%d)\n",
+ sd->name, fmd->num_sensors);
+ fmd->num_sensors++;
+
+mod_put:
+ module_put(client->driver->driver.owner);
+dev_put:
+ device_unlock(&client->dev);
+ put_device(&client->dev);
+ return ret;
}
+/* Parse port node and register as a sub-device any sensor specified there. */
+static int fimc_md_parse_port_node(struct fimc_md *fmd,
+ struct device_node *port,
+ unsigned int index)
+{
+ struct device_node *rem, *endpoint;
+ struct fimc_source_info *pd;
+ struct v4l2_of_endpoint bus_cfg;
+ u32 tmp, reg = 0;
+ int ret;
+
+ if (WARN_ON(of_property_read_u32(port, "reg", ®) ||
+ reg >= FIMC_MAX_SENSORS))
+ return -EINVAL;
+
+ pd = &fmd->sensor[index].pdata;
+ pd->mux_id = (reg - 1) & 0x1;
+
+ /* Assume here a port node can have only one endpoint node. */
+ endpoint = of_get_next_child(port, NULL);
+ if (!endpoint)
+ return 0;
+
+ rem = v4l2_of_get_remote_port_parent(endpoint);
+ of_node_put(endpoint);
+ if (rem == NULL) {
+ v4l2_info(&fmd->v4l2_dev, "Remote device at %s not found\n",
+ endpoint->full_name);
+ return 0;
+ }
+ if (!of_property_read_u32(rem, "samsung,camclk-out", &tmp))
+ pd->clk_id = tmp;
+
+ if (!of_property_read_u32(rem, "clock-frequency", &tmp))
+ pd->clk_frequency = tmp;
+
+ if (pd->clk_frequency == 0) {
+ v4l2_err(&fmd->v4l2_dev, "Wrong clock frequency at node %s\n",
+ rem->full_name);
+ of_node_put(rem);
+ return -EINVAL;
+ }
+
+ if (fimc_input_is_parallel(reg)) {
+ v4l2_of_parse_parallel_bus(endpoint, &bus_cfg);
+ if (bus_cfg.mbus.type == V4L2_MBUS_PARALLEL)
+ pd->sensor_bus_type = FIMC_BUS_TYPE_ITU_601;
+ else
+ pd->sensor_bus_type = FIMC_BUS_TYPE_ITU_656;
+ pd->flags = bus_cfg.mbus.flags;
+ } else if (fimc_input_is_mipi_csi(reg)) {
+ /*
+ * MIPI CSI-2: only input mux selection
+ * and sensor's clock frequency is needed.
+ */
+ pd->sensor_bus_type = FIMC_BUS_TYPE_MIPI_CSI2;
+ } else {
+ v4l2_err(&fmd->v4l2_dev, "Wrong port id (%u) at node %s\n",
+ reg, rem->full_name);
+ }
+
+ ret = fimc_md_of_add_sensor(fmd, rem, index);
+ of_node_put(rem);
+
+ return ret;
+}
+
+/* Register all SoC external sub-devices */
+static int fimc_md_of_sensors_register(struct fimc_md *fmd,
+ struct device_node *np)
+{
+ struct device_node *parent = fmd->pdev->dev.of_node;
+ struct device_node *node, *ports;
+ int index = 0;
+ int ret;
+
+ /* Attach sensors linked to MIPI CSI-2 receivers */
+ for_each_available_child_of_node(parent, node) {
+ struct device_node *port;
+
+ if (of_node_cmp(node->name, "csis"))
+ continue;
+ /* The csis node can have only port subnode. */
+ port = of_get_next_child(node, NULL);
+ if (!port)
+ continue;
+
+ ret = fimc_md_parse_port_node(fmd, port, index);
+ if (ret < 0)
+ return ret;
+ index++;
+ }
+
+ /* Attach sensors listed in the parallel-ports node */
+ ports = of_get_child_by_name(parent, "parallel-ports");
+ if (!ports)
+ return 0;
+
+ for_each_child_of_node(ports, node) {
+ ret = fimc_md_parse_port_node(fmd, node, index);
+ if (ret < 0)
+ break;
+ index++;
+ }
+
+ return 0;
+}
+#else
+#define fimc_md_of_sensors_register(fmd, np) (-ENOSYS)
+#endif
+
static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
{
struct s5p_platform_fimc *pdata = fmd->pdev->dev.platform_data;
+ struct device_node *of_node = fmd->pdev->dev.of_node;
struct fimc_dev *fd = NULL;
- int num_clients, ret, i;
+ int num_clients = 0;
+ int ret, i;
/*
* Runtime resume one of the FIMC entities to make sure
@@ -281,34 +452,42 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
fd = fmd->fimc[i];
if (!fd)
return -ENXIO;
+
ret = pm_runtime_get_sync(&fd->pdev->dev);
if (ret < 0)
return ret;
- WARN_ON(pdata->num_clients > ARRAY_SIZE(fmd->sensor));
- num_clients = min_t(u32, pdata->num_clients, ARRAY_SIZE(fmd->sensor));
+ if (of_node) {
+ fmd->num_sensors = 0;
+ ret = fimc_md_of_sensors_register(fmd, of_node);
+ } else if (pdata) {
+ WARN_ON(pdata->num_clients > ARRAY_SIZE(fmd->sensor));
+ num_clients = min_t(u32, pdata->num_clients,
+ ARRAY_SIZE(fmd->sensor));
+ fmd->num_sensors = num_clients;
fmd->num_sensors = num_clients;
for (i = 0; i < num_clients; i++) {
struct v4l2_subdev *sd;
- fmd->sensor[i].pdata = pdata->source_info[i];
- ret = __fimc_md_set_camclk(fmd, &fmd->sensor[i], true);
- if (ret)
- break;
- sd = fimc_md_register_sensor(fmd, &fmd->sensor[i]);
- ret = __fimc_md_set_camclk(fmd, &fmd->sensor[i], false);
+ fmd->sensor[i].pdata = pdata->source_info[i];
+ ret = __fimc_md_set_camclk(fmd, &fmd->sensor[i], true);
+ if (ret)
+ break;
+ sd = fimc_md_register_sensor(fmd, &fmd->sensor[i]);
+ ret = __fimc_md_set_camclk(fmd, &fmd->sensor[i], false);
- if (!IS_ERR(sd)) {
+ if (IS_ERR(sd)) {
+ fmd->sensor[i].subdev = NULL;
+ ret = PTR_ERR(sd);
+ break;
+ }
fmd->sensor[i].subdev = sd;
- } else {
- fmd->sensor[i].subdev = NULL;
- ret = PTR_ERR(sd);
- break;
+ if (ret)
+ break;
}
- if (ret)
- break;
}
+
pm_runtime_put(&fd->pdev->dev);
return ret;
}
@@ -976,11 +1155,12 @@ static DEVICE_ATTR(subdev_conf_mode, S_IWUSR | S_IRUGO,
static int fimc_md_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
struct v4l2_device *v4l2_dev;
struct fimc_md *fmd;
int ret;
- fmd = devm_kzalloc(&pdev->dev, sizeof(*fmd), GFP_KERNEL);
+ fmd = devm_kzalloc(dev, sizeof(*fmd), GFP_KERNEL);
if (!fmd)
return -ENOMEM;
@@ -990,7 +1170,7 @@ static int fimc_md_probe(struct platform_device *pdev)
strlcpy(fmd->media_dev.model, "SAMSUNG S5P FIMC",
sizeof(fmd->media_dev.model));
fmd->media_dev.link_notify = fimc_md_link_notify;
- fmd->media_dev.dev = &pdev->dev;
+ fmd->media_dev.dev = dev;
v4l2_dev = &fmd->v4l2_dev;
v4l2_dev->mdev = &fmd->media_dev;
@@ -998,7 +1178,7 @@ static int fimc_md_probe(struct platform_device *pdev)
strlcpy(v4l2_dev->name, "s5p-fimc-md", sizeof(v4l2_dev->name));
- ret = v4l2_device_register(&pdev->dev, &fmd->v4l2_dev);
+ ret = v4l2_device_register(dev, &fmd->v4l2_dev);
if (ret < 0) {
v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret);
return ret;
@@ -1025,11 +1205,12 @@ static int fimc_md_probe(struct platform_device *pdev)
if (ret)
goto err_unlock;
- if (pdev->dev.platform_data) {
+ if (dev->platform_data || dev->of_node) {
ret = fimc_md_register_sensor_entities(fmd);
if (ret)
goto err_unlock;
}
+
ret = fimc_md_create_links(fmd);
if (ret)
goto err_unlock;
@@ -15,6 +15,19 @@
#include <media/media-entity.h>
/*
+ * Enumeration of data inputs to the camera subsystem.
+ */
+enum fimc_input {
+ FIMC_INPUT_PARALLEL_0 = 1,
+ FIMC_INPUT_PARALLEL_1,
+ FIMC_INPUT_MIPI_CSI2_0 = 3,
+ FIMC_INPUT_MIPI_CSI2_1,
+ FIMC_INPUT_WRITEBACK_A = 5,
+ FIMC_INPUT_WRITEBACK_B,
+ FIMC_INPUT_WRITEBACK_ISP = 5,
+};
+
+/*
* Enumeration of the FIMC data bus types.
*/
enum fimc_bus_type {
@@ -32,6 +45,9 @@ enum fimc_bus_type {
FIMC_BUS_TYPE_ISP_WRITEBACK = FIMC_BUS_TYPE_LCD_WRITEBACK_B,
};
+#define fimc_input_is_parallel(x) ((x) == 1 || (x) == 2)
+#define fimc_input_is_mipi_csi(x) ((x) == 3 || (x) == 4)
+
struct i2c_board_info;
/**