| Message ID | 1360911394-19873-1-git-send-email-ch.naveen@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 02/15/2013 07:56 AM, Naveen Krishna Chatradhi wrote: > This patch adds New driver to support: > 1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 > and future SoCs from Samsung > 2. Add ADC driver under iio/adc framework > 3. Also adds the Documentation for device tree bindings > > Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Looks good. Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> One minor thing though, there are a couple of places where you break a line into multiple lines, even though the line fits easily inside the 80 chars per line limit. In my opinion this doesn't help the legibility of the code. E.g.: + info->value = readl(ADC_V1_DATX(info->regs)) & + ADC_DATX_MASK; There is no need to respin the patch just for this, but if you happen to make another version of the patch, that's something to consider. > --- > Changes since v1: > > 1. Fixed comments from Lars > 2. Added support for ADC on EXYNOS5410 > > Changes since v2: > > 1. Changed the instance name for (struct iio_dev *) to indio_dev > 2. Changed devm_request_irq to request_irq > > Few doubts regarding the mappings and child device handling. > Kindly, suggest me better methods. > > Changes since v3: > > 1. Added clk_prepare_disable and regulator_disable calls in _remove() > 2. Moved init_completion before irq_request > 3. Added NULL pointer check for devm_request_and_ioremap() return value. > 4. Use number of channels as per the ADC version > 5. Change the define ADC_V1_CHANNEL to ADC_CHANNEL > 6. Update the Documentation to include EXYNOS5410 compatible > > Changes since v4: > > 1. if devm_request_and_ioremap() failes, free iio_device before returning > > Changes since v5: > > 1. Fixed comments from Olof (ADC hardware version handling) > 2. Rebased on top of comming OF framework for IIO by "Guenter Roeck". > > Changes since v6: > > 1. Addressed comments from Lars-Peter Clausen btw. these kind of change logs are not really helpful, it would be better to list the actual changes made. > > .../bindings/arm/samsung/exynos5-adc.txt | 42 ++ > drivers/iio/adc/Kconfig | 7 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/exynos_adc.c | 438 ++++++++++++++++++++ > 4 files changed, 488 insertions(+) > .../devicetree/bindings/arm/samsung/exynos-adc.txt | 52 +++ > drivers/iio/adc/Kconfig | 7 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/exynos_adc.c | 440 ++++++++++++++++++++ > 4 files changed, 500 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt > create mode 100644 drivers/iio/adc/exynos_adc.c > > diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt > new file mode 100644 > index 0000000..f686378 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt > @@ -0,0 +1,52 @@ > +Samsung Exynos Analog to Digital Converter bindings > + > +This devicetree binding are for the new adc driver written fori > +Exynos4 and upward SoCs from Samsung. > + > +New driver handles the following > +1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 > + and future SoCs from Samsung > +2. Add ADC driver under iio/adc framework > +3. Also adds the Documentation for device tree bindings > + > +Required properties: > +- compatible: Must be "samsung,exynos-adc-v1" > + for exynos4412/5250 controllers. > + Must be "samsung,exynos-adc-v2" for > + future controllers. > +- reg: Contains ADC register address range (base address and > + length). > +- interrupts: Contains the interrupt information for the timer. The > + format is being dependent on which interrupt controller > + the Samsung device uses. > +- #io-channel-cells = <1>; As ADC has multiple outputs > + > +Note: child nodes can be added for auto probing from device tree. > + > +Example: adding device info in dtsi file > + > +adc: adc@12D10000 { > + compatible = "samsung,exynos-adc-v1"; > + reg = <0x12D10000 0x100>; > + interrupts = <0 106 0>; > + #io-channel-cells = <1>; > + io-channel-ranges; > +}; > + > + > +Example: Adding child nodes in dts file > + > +adc@12D10000 { > + > + /* NTC thermistor is a hwmon device */ > + ncp15wb473@0 { > + compatible = "ntc,ncp15wb473"; > + pullup-uV = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 4>; > + }; > +}; > + > +Note: Does not apply to ADC driver under arch/arm/plat-samsung/ > +Note: The child node can be added under the adc node or seperately. > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index e372257..04311f8 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -91,6 +91,13 @@ config AT91_ADC > help > Say yes here to build support for Atmel AT91 ADC. > > +config EXYNOS_ADC > + bool "Exynos ADC driver support" > + help > + Core support for the ADC block found in the Samsung EXYNOS series > + of SoCs for drivers such as the touchscreen and hwmon to use to share > + this resource. > + > config LP8788_ADC > bool "LP8788 ADC driver" > depends on MFD_LP8788 > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > index 2d5f100..fabac2c 100644 > --- a/drivers/iio/adc/Makefile > +++ b/drivers/iio/adc/Makefile > @@ -10,6 +10,7 @@ obj-$(CONFIG_AD7791) += ad7791.o > obj-$(CONFIG_AD7793) += ad7793.o > obj-$(CONFIG_AD7887) += ad7887.o > obj-$(CONFIG_AT91_ADC) += at91_adc.o > +obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o > obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o > obj-$(CONFIG_MAX1363) += max1363.o > obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o > diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c > new file mode 100644 > index 0000000..ed6fdd7 > --- /dev/null > +++ b/drivers/iio/adc/exynos_adc.c > @@ -0,0 +1,440 @@ > +/* > + * exynos_adc.c - Support for ADC in EXYNOS SoCs > + * > + * 8 ~ 10 channel, 10/12-bit ADC > + * > + * Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > + */ > + > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/interrupt.h> > +#include <linux/delay.h> > +#include <linux/kernel.h> > +#include <linux/slab.h> > +#include <linux/io.h> > +#include <linux/clk.h> > +#include <linux/completion.h> > +#include <linux/of.h> > +#include <linux/of_irq.h> > +#include <linux/regulator/consumer.h> > +#include <linux/of_platform.h> > + > +#include <linux/iio/iio.h> > +#include <linux/iio/machine.h> > +#include <linux/iio/driver.h> > + > +enum adc_version { > + ADC_V1, > + ADC_V2 > +}; > + > +/* EXYNOS4412/5250 ADC_V1 registers definitions */ > +#define ADC_V1_CON(x) ((x) + 0x00) > +#define ADC_V1_DLY(x) ((x) + 0x08) > +#define ADC_V1_DATX(x) ((x) + 0x0C) > +#define ADC_V1_INTCLR(x) ((x) + 0x18) > +#define ADC_V1_MUX(x) ((x) + 0x1c) > + > +/* Future ADC_V2 registers definitions */ > +#define ADC_V2_CON1(x) ((x) + 0x00) > +#define ADC_V2_CON2(x) ((x) + 0x04) > +#define ADC_V2_STAT(x) ((x) + 0x08) > +#define ADC_V2_INT_EN(x) ((x) + 0x10) > +#define ADC_V2_INT_ST(x) ((x) + 0x14) > +#define ADC_V2_VER(x) ((x) + 0x20) > + > +/* Bit definitions for ADC_V1 */ > +#define ADC_V1_CON_RES (1u << 16) > +#define ADC_V1_CON_PRSCEN (1u << 14) > +#define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6) > +#define ADC_V1_CON_STANDBY (1u << 2) > + > +/* Bit definitions for ADC_V2 */ > +#define ADC_V2_CON1_SOFT_RESET (1u << 2) > + > +#define ADC_V2_CON2_OSEL (1u << 10) > +#define ADC_V2_CON2_ESEL (1u << 9) > +#define ADC_V2_CON2_HIGHF (1u << 8) > +#define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4) > +#define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0) > +#define ADC_V2_CON2_ACH_MASK 0xF > + > +#define MAX_ADC_V2_CHANNELS 10 > +#define MAX_ADC_V1_CHANNELS 8 > + > +/* Bit definitions common for ADC_V1 and ADC_V2 */ > +#define ADC_CON_EN_START (1u << 0) > +#define ADC_DATX_MASK 0xFFF > + > +#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000)) > + > +struct exynos_adc { > + void __iomem *regs; > + struct clk *clk; > + unsigned int irq; > + struct regulator *vdd; > + > + struct completion completion; > + > + u32 value; > + unsigned int version; > +}; > + > +static const struct of_device_id exynos_adc_match[] = { > + { .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 }, > + { .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, exynos_adc_match); > + > +static inline unsigned int exynos_adc_get_version(struct platform_device *pdev) > +{ > + const struct of_device_id *match; > + > + match = of_match_node(exynos_adc_match, pdev->dev.of_node); > + return (unsigned int)match->data; > +} > + > +static int exynos_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, > + int *val2, > + long mask) > +{ > + struct exynos_adc *info = iio_priv(indio_dev); > + unsigned long timeout; > + u32 con1, con2; > + > + if (mask != IIO_CHAN_INFO_RAW) > + return -EINVAL; > + > + mutex_lock(&indio_dev->mlock); > + > + /* Select the channel to be used and Trigger conversion */ > + if (info->version == ADC_V2) { > + con2 = readl(ADC_V2_CON2(info->regs)); > + con2 &= ~ADC_V2_CON2_ACH_MASK; > + con2 |= ADC_V2_CON2_ACH_SEL(chan->address); > + writel(con2, ADC_V2_CON2(info->regs)); > + > + con1 = readl(ADC_V2_CON1(info->regs)); > + writel(con1 | ADC_CON_EN_START, > + ADC_V2_CON1(info->regs)); > + } else { > + writel(chan->address, ADC_V1_MUX(info->regs)); > + > + con1 = readl(ADC_V1_CON(info->regs)); > + writel(con1 | ADC_CON_EN_START, > + ADC_V1_CON(info->regs)); > + } > + > + timeout = wait_for_completion_interruptible_timeout > + (&info->completion, EXYNOS_ADC_TIMEOUT); > + *val = info->value; > + > + mutex_unlock(&indio_dev->mlock); > + > + if (timeout == 0) > + return -ETIMEDOUT; > + > + return IIO_VAL_INT; > +} > + > +static irqreturn_t exynos_adc_isr(int irq, void *dev_id) > +{ > + struct exynos_adc *info = (struct exynos_adc *)dev_id; > + > + /* Read value */ > + info->value = readl(ADC_V1_DATX(info->regs)) & > + ADC_DATX_MASK; > + /* clear irq */ > + if (info->version == ADC_V2) > + writel(1, ADC_V2_INT_ST(info->regs)); > + else > + writel(1, ADC_V1_INTCLR(info->regs)); > + > + complete(&info->completion); > + > + return IRQ_HANDLED; > +} > + > +static int exynos_adc_reg_access(struct iio_dev *indio_dev, > + unsigned reg, unsigned writeval, > + unsigned *readval) > +{ > + struct exynos_adc *info = iio_priv(indio_dev); > + > + if (readval == NULL) > + return -EINVAL; > + > + *readval = readl(info->regs + reg); > + > + return 0; > +} > + > +static const struct iio_info exynos_adc_iio_info = { > + .read_raw = &exynos_read_raw, > + .debugfs_reg_access = &exynos_adc_reg_access, > + .driver_module = THIS_MODULE, > +}; > + > +#define ADC_CHANNEL(_index, _id) { \ > + .type = IIO_VOLTAGE, \ > + .indexed = 1, \ > + .channel = _index, \ > + .address = _index, \ > + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ > + .datasheet_name = _id, \ > +} > + > +static const struct iio_chan_spec exynos_adc_iio_channels[] = { > + ADC_CHANNEL(0, "adc0"), > + ADC_CHANNEL(1, "adc1"), > + ADC_CHANNEL(2, "adc2"), > + ADC_CHANNEL(3, "adc3"), > + ADC_CHANNEL(4, "adc4"), > + ADC_CHANNEL(5, "adc5"), > + ADC_CHANNEL(6, "adc6"), > + ADC_CHANNEL(7, "adc7"), > + ADC_CHANNEL(8, "adc8"), > + ADC_CHANNEL(9, "adc9"), > +}; > + > +static int exynos_adc_remove_devices(struct device *dev, void *c) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + > + platform_device_unregister(pdev); > + > + return 0; > +} > + > +static void exynos_adc_hw_init(struct exynos_adc *info) > +{ > + u32 con1, con2; > + > + if (info->version == ADC_V2) { > + con1 = ADC_V2_CON1_SOFT_RESET; > + writel(con1, ADC_V2_CON1(info->regs)); > + > + con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | > + ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); > + writel(con2, ADC_V2_CON2(info->regs)); > + > + /* Enable interrupts */ > + writel(1, ADC_V2_INT_EN(info->regs)); > + } else { > + /* set default prescaler values and Enable prescaler */ > + con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; > + > + /* Enable 12-bit ADC resolution */ > + con1 |= ADC_V1_CON_RES; > + writel(con1, ADC_V1_CON(info->regs)); > + } > +} > + > +static int exynos_adc_probe(struct platform_device *pdev) > +{ > + struct exynos_adc *info = NULL; > + struct device_node *np = pdev->dev.of_node; > + struct iio_dev *indio_dev = NULL; > + struct resource *mem; > + int ret = -ENODEV; > + int irq; > + > + if (!np) > + return ret; > + > + indio_dev = iio_device_alloc(sizeof(struct exynos_adc)); > + if (!indio_dev) { > + dev_err(&pdev->dev, "failed allocating iio device\n"); > + return -ENOMEM; > + } > + > + info = iio_priv(indio_dev); > + > + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + > + info->regs = devm_request_and_ioremap(&pdev->dev, mem); > + if (!info->regs) { > + ret = -ENOMEM; > + goto err_iio; > + } > + > + irq = platform_get_irq(pdev, 0); > + if (irq < 0) { > + dev_err(&pdev->dev, "no irq resource?\n"); > + ret = irq; > + goto err_iio; > + } > + > + info->irq = irq; > + > + init_completion(&info->completion); > + > + ret = request_irq(info->irq, exynos_adc_isr, > + 0, dev_name(&pdev->dev), info); > + if (ret < 0) { > + dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", > + info->irq); > + goto err_iio; > + } > + > + info->clk = devm_clk_get(&pdev->dev, "adc"); > + if (IS_ERR(info->clk)) { > + dev_err(&pdev->dev, "failed getting clock, err = %ld\n", > + PTR_ERR(info->clk)); > + ret = PTR_ERR(info->clk); > + goto err_irq; > + } > + > + info->vdd = devm_regulator_get(&pdev->dev, "vdd"); > + if (IS_ERR(info->vdd)) { > + dev_err(&pdev->dev, "failed getting regulator, err = %ld\n", > + PTR_ERR(info->vdd)); > + ret = PTR_ERR(info->vdd); > + goto err_irq; > + } > + > + info->version = exynos_adc_get_version(pdev); > + > + platform_set_drvdata(pdev, indio_dev); > + > + indio_dev->name = dev_name(&pdev->dev); > + indio_dev->dev.parent = &pdev->dev; > + indio_dev->dev.of_node = pdev->dev.of_node; > + indio_dev->info = &exynos_adc_iio_info; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->channels = exynos_adc_iio_channels; > + > + if (info->version == ADC_V1) > + indio_dev->num_channels = MAX_ADC_V1_CHANNELS; > + else > + indio_dev->num_channels = MAX_ADC_V2_CHANNELS; > + > + ret = iio_device_register(indio_dev); > + if (ret) > + goto err_irq; > + > + ret = regulator_enable(info->vdd); > + if (ret) > + goto err_iio_dev; > + > + clk_prepare_enable(info->clk); > + > + exynos_adc_hw_init(info); > + > + ret = of_platform_populate(np, exynos_adc_match, NULL, &pdev->dev); > + if (ret < 0) { > + dev_err(&pdev->dev, "failed adding child nodes\n"); > + goto err_of_populate; > + } > + > + return 0; > + > +err_of_populate: > + device_for_each_child(&pdev->dev, NULL, > + exynos_adc_remove_devices); > + regulator_disable(info->vdd); > + clk_disable_unprepare(info->clk); > +err_iio_dev: > + iio_device_unregister(indio_dev); > +err_irq: > + free_irq(info->irq, info); > +err_iio: > + iio_device_free(indio_dev); > + return ret; > +} > + > +static int exynos_adc_remove(struct platform_device *pdev) > +{ > + struct iio_dev *indio_dev = platform_get_drvdata(pdev); > + struct exynos_adc *info = iio_priv(indio_dev); > + > + device_for_each_child(&pdev->dev, NULL, > + exynos_adc_remove_devices); > + regulator_disable(info->vdd); > + clk_disable_unprepare(info->clk); > + iio_device_unregister(indio_dev); > + free_irq(info->irq, info); > + iio_device_free(indio_dev); > + > + return 0; > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int exynos_adc_suspend(struct device *dev) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + struct exynos_adc *info = platform_get_drvdata(pdev); > + u32 con; > + > + if (info->version == ADC_V2) { > + con = readl(ADC_V2_CON1(info->regs)); > + con &= ~ADC_CON_EN_START; > + writel(con, ADC_V2_CON1(info->regs)); > + } else { > + con = readl(ADC_V1_CON(info->regs)); > + con |= ADC_V1_CON_STANDBY; > + writel(con, ADC_V1_CON(info->regs)); > + } > + > + clk_disable_unprepare(info->clk); > + regulator_disable(info->vdd); > + > + return 0; > +} > + > +static int exynos_adc_resume(struct device *dev) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + struct exynos_adc *info = platform_get_drvdata(pdev); > + int ret; > + > + ret = regulator_enable(info->vdd); > + if (ret) > + return ret; > + > + clk_prepare_enable(info->clk); > + > + exynos_adc_hw_init(info); > + > + return 0; > +} > +#endif > + > +static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops, > + exynos_adc_suspend, > + exynos_adc_resume); > + > +static struct platform_driver exynos_adc_driver = { > + .probe = exynos_adc_probe, > + .remove = exynos_adc_remove, > + .driver = { > + .name = "exynos-adc", > + .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(exynos_adc_match), > + .pm = &exynos_adc_pm_ops, > + }, > +}; > + > +module_platform_driver(exynos_adc_driver); > + > +MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>"); > +MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver"); > +MODULE_LICENSE("GPL v2"); -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 15 February 2013 18:43, Lars-Peter Clausen <lars@metafoo.de> wrote: > On 02/15/2013 07:56 AM, Naveen Krishna Chatradhi wrote: >> This patch adds New driver to support: >> 1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 >> and future SoCs from Samsung >> 2. Add ADC driver under iio/adc framework >> 3. Also adds the Documentation for device tree bindings >> >> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> > > Looks good. > > Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> > > One minor thing though, there are a couple of places where you break a line > into multiple lines, even though the line fits easily inside the 80 chars > per line limit. In my opinion this doesn't help the legibility of the code. > E.g.: > > + info->value = readl(ADC_V1_DATX(info->regs)) & > + ADC_DATX_MASK; > > There is no need to respin the patch just for this, but if you happen to > make another version of the patch, that's something to consider. > >> --- >> Changes since v1: >> >> 1. Fixed comments from Lars >> 2. Added support for ADC on EXYNOS5410 >> >> Changes since v2: >> >> 1. Changed the instance name for (struct iio_dev *) to indio_dev >> 2. Changed devm_request_irq to request_irq >> >> Few doubts regarding the mappings and child device handling. >> Kindly, suggest me better methods. >> >> Changes since v3: >> >> 1. Added clk_prepare_disable and regulator_disable calls in _remove() >> 2. Moved init_completion before irq_request >> 3. Added NULL pointer check for devm_request_and_ioremap() return value. >> 4. Use number of channels as per the ADC version >> 5. Change the define ADC_V1_CHANNEL to ADC_CHANNEL >> 6. Update the Documentation to include EXYNOS5410 compatible >> >> Changes since v4: >> >> 1. if devm_request_and_ioremap() failes, free iio_device before returning >> >> Changes since v5: >> >> 1. Fixed comments from Olof (ADC hardware version handling) >> 2. Rebased on top of comming OF framework for IIO by "Guenter Roeck". >> >> Changes since v6: >> >> 1. Addressed comments from Lars-Peter Clausen > > > btw. these kind of change logs are not really helpful, it would be better to > list the actual changes made. Hello Lars, No other changes from my side. But, I can send another version. Do you want me to list the latest change alone instead of the whole change list ? > >> >> .../bindings/arm/samsung/exynos5-adc.txt | 42 ++ >> drivers/iio/adc/Kconfig | 7 + >> drivers/iio/adc/Makefile | 1 + >> drivers/iio/adc/exynos_adc.c | 438 ++++++++++++++++++++ >> 4 files changed, 488 insertions(+) >> .../devicetree/bindings/arm/samsung/exynos-adc.txt | 52 +++ >> drivers/iio/adc/Kconfig | 7 + >> drivers/iio/adc/Makefile | 1 + >> drivers/iio/adc/exynos_adc.c | 440 ++++++++++++++++++++ >> 4 files changed, 500 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt >> create mode 100644 drivers/iio/adc/exynos_adc.c >> >> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt >> new file mode 100644 >> index 0000000..f686378 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt >> @@ -0,0 +1,52 @@ >> +Samsung Exynos Analog to Digital Converter bindings >> + >> +This devicetree binding are for the new adc driver written fori >> +Exynos4 and upward SoCs from Samsung. >> + >> +New driver handles the following >> +1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 >> + and future SoCs from Samsung >> +2. Add ADC driver under iio/adc framework >> +3. Also adds the Documentation for device tree bindings >> + >> +Required properties: >> +- compatible: Must be "samsung,exynos-adc-v1" >> + for exynos4412/5250 controllers. >> + Must be "samsung,exynos-adc-v2" for >> + future controllers. >> +- reg: Contains ADC register address range (base address and >> + length). >> +- interrupts: Contains the interrupt information for the timer. The >> + format is being dependent on which interrupt controller >> + the Samsung device uses. >> +- #io-channel-cells = <1>; As ADC has multiple outputs >> + >> +Note: child nodes can be added for auto probing from device tree. >> + >> +Example: adding device info in dtsi file >> + >> +adc: adc@12D10000 { >> + compatible = "samsung,exynos-adc-v1"; >> + reg = <0x12D10000 0x100>; >> + interrupts = <0 106 0>; >> + #io-channel-cells = <1>; >> + io-channel-ranges; >> +}; >> + >> + >> +Example: Adding child nodes in dts file >> + >> +adc@12D10000 { >> + >> + /* NTC thermistor is a hwmon device */ >> + ncp15wb473@0 { >> + compatible = "ntc,ncp15wb473"; >> + pullup-uV = <1800000>; >> + pullup-ohm = <47000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 4>; >> + }; >> +}; >> + >> +Note: Does not apply to ADC driver under arch/arm/plat-samsung/ >> +Note: The child node can be added under the adc node or seperately. >> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig >> index e372257..04311f8 100644 >> --- a/drivers/iio/adc/Kconfig >> +++ b/drivers/iio/adc/Kconfig >> @@ -91,6 +91,13 @@ config AT91_ADC >> help >> Say yes here to build support for Atmel AT91 ADC. >> >> +config EXYNOS_ADC >> + bool "Exynos ADC driver support" >> + help >> + Core support for the ADC block found in the Samsung EXYNOS series >> + of SoCs for drivers such as the touchscreen and hwmon to use to share >> + this resource. >> + >> config LP8788_ADC >> bool "LP8788 ADC driver" >> depends on MFD_LP8788 >> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile >> index 2d5f100..fabac2c 100644 >> --- a/drivers/iio/adc/Makefile >> +++ b/drivers/iio/adc/Makefile >> @@ -10,6 +10,7 @@ obj-$(CONFIG_AD7791) += ad7791.o >> obj-$(CONFIG_AD7793) += ad7793.o >> obj-$(CONFIG_AD7887) += ad7887.o >> obj-$(CONFIG_AT91_ADC) += at91_adc.o >> +obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o >> obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o >> obj-$(CONFIG_MAX1363) += max1363.o >> obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o >> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c >> new file mode 100644 >> index 0000000..ed6fdd7 >> --- /dev/null >> +++ b/drivers/iio/adc/exynos_adc.c >> @@ -0,0 +1,440 @@ >> +/* >> + * exynos_adc.c - Support for ADC in EXYNOS SoCs >> + * >> + * 8 ~ 10 channel, 10/12-bit ADC >> + * >> + * Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program; if not, write to the Free Software >> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. >> + */ >> + >> +#include <linux/module.h> >> +#include <linux/platform_device.h> >> +#include <linux/interrupt.h> >> +#include <linux/delay.h> >> +#include <linux/kernel.h> >> +#include <linux/slab.h> >> +#include <linux/io.h> >> +#include <linux/clk.h> >> +#include <linux/completion.h> >> +#include <linux/of.h> >> +#include <linux/of_irq.h> >> +#include <linux/regulator/consumer.h> >> +#include <linux/of_platform.h> >> + >> +#include <linux/iio/iio.h> >> +#include <linux/iio/machine.h> >> +#include <linux/iio/driver.h> >> + >> +enum adc_version { >> + ADC_V1, >> + ADC_V2 >> +}; >> + >> +/* EXYNOS4412/5250 ADC_V1 registers definitions */ >> +#define ADC_V1_CON(x) ((x) + 0x00) >> +#define ADC_V1_DLY(x) ((x) + 0x08) >> +#define ADC_V1_DATX(x) ((x) + 0x0C) >> +#define ADC_V1_INTCLR(x) ((x) + 0x18) >> +#define ADC_V1_MUX(x) ((x) + 0x1c) >> + >> +/* Future ADC_V2 registers definitions */ >> +#define ADC_V2_CON1(x) ((x) + 0x00) >> +#define ADC_V2_CON2(x) ((x) + 0x04) >> +#define ADC_V2_STAT(x) ((x) + 0x08) >> +#define ADC_V2_INT_EN(x) ((x) + 0x10) >> +#define ADC_V2_INT_ST(x) ((x) + 0x14) >> +#define ADC_V2_VER(x) ((x) + 0x20) >> + >> +/* Bit definitions for ADC_V1 */ >> +#define ADC_V1_CON_RES (1u << 16) >> +#define ADC_V1_CON_PRSCEN (1u << 14) >> +#define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6) >> +#define ADC_V1_CON_STANDBY (1u << 2) >> + >> +/* Bit definitions for ADC_V2 */ >> +#define ADC_V2_CON1_SOFT_RESET (1u << 2) >> + >> +#define ADC_V2_CON2_OSEL (1u << 10) >> +#define ADC_V2_CON2_ESEL (1u << 9) >> +#define ADC_V2_CON2_HIGHF (1u << 8) >> +#define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4) >> +#define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0) >> +#define ADC_V2_CON2_ACH_MASK 0xF >> + >> +#define MAX_ADC_V2_CHANNELS 10 >> +#define MAX_ADC_V1_CHANNELS 8 >> + >> +/* Bit definitions common for ADC_V1 and ADC_V2 */ >> +#define ADC_CON_EN_START (1u << 0) >> +#define ADC_DATX_MASK 0xFFF >> + >> +#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000)) >> + >> +struct exynos_adc { >> + void __iomem *regs; >> + struct clk *clk; >> + unsigned int irq; >> + struct regulator *vdd; >> + >> + struct completion completion; >> + >> + u32 value; >> + unsigned int version; >> +}; >> + >> +static const struct of_device_id exynos_adc_match[] = { >> + { .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 }, >> + { .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, exynos_adc_match); >> + >> +static inline unsigned int exynos_adc_get_version(struct platform_device *pdev) >> +{ >> + const struct of_device_id *match; >> + >> + match = of_match_node(exynos_adc_match, pdev->dev.of_node); >> + return (unsigned int)match->data; >> +} >> + >> +static int exynos_read_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> + int *val, >> + int *val2, >> + long mask) >> +{ >> + struct exynos_adc *info = iio_priv(indio_dev); >> + unsigned long timeout; >> + u32 con1, con2; >> + >> + if (mask != IIO_CHAN_INFO_RAW) >> + return -EINVAL; >> + >> + mutex_lock(&indio_dev->mlock); >> + >> + /* Select the channel to be used and Trigger conversion */ >> + if (info->version == ADC_V2) { >> + con2 = readl(ADC_V2_CON2(info->regs)); >> + con2 &= ~ADC_V2_CON2_ACH_MASK; >> + con2 |= ADC_V2_CON2_ACH_SEL(chan->address); >> + writel(con2, ADC_V2_CON2(info->regs)); >> + >> + con1 = readl(ADC_V2_CON1(info->regs)); >> + writel(con1 | ADC_CON_EN_START, >> + ADC_V2_CON1(info->regs)); >> + } else { >> + writel(chan->address, ADC_V1_MUX(info->regs)); >> + >> + con1 = readl(ADC_V1_CON(info->regs)); >> + writel(con1 | ADC_CON_EN_START, >> + ADC_V1_CON(info->regs)); >> + } >> + >> + timeout = wait_for_completion_interruptible_timeout >> + (&info->completion, EXYNOS_ADC_TIMEOUT); >> + *val = info->value; >> + >> + mutex_unlock(&indio_dev->mlock); >> + >> + if (timeout == 0) >> + return -ETIMEDOUT; >> + >> + return IIO_VAL_INT; >> +} >> + >> +static irqreturn_t exynos_adc_isr(int irq, void *dev_id) >> +{ >> + struct exynos_adc *info = (struct exynos_adc *)dev_id; >> + >> + /* Read value */ >> + info->value = readl(ADC_V1_DATX(info->regs)) & >> + ADC_DATX_MASK; >> + /* clear irq */ >> + if (info->version == ADC_V2) >> + writel(1, ADC_V2_INT_ST(info->regs)); >> + else >> + writel(1, ADC_V1_INTCLR(info->regs)); >> + >> + complete(&info->completion); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static int exynos_adc_reg_access(struct iio_dev *indio_dev, >> + unsigned reg, unsigned writeval, >> + unsigned *readval) >> +{ >> + struct exynos_adc *info = iio_priv(indio_dev); >> + >> + if (readval == NULL) >> + return -EINVAL; >> + >> + *readval = readl(info->regs + reg); >> + >> + return 0; >> +} >> + >> +static const struct iio_info exynos_adc_iio_info = { >> + .read_raw = &exynos_read_raw, >> + .debugfs_reg_access = &exynos_adc_reg_access, >> + .driver_module = THIS_MODULE, >> +}; >> + >> +#define ADC_CHANNEL(_index, _id) { \ >> + .type = IIO_VOLTAGE, \ >> + .indexed = 1, \ >> + .channel = _index, \ >> + .address = _index, \ >> + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ >> + .datasheet_name = _id, \ >> +} >> + >> +static const struct iio_chan_spec exynos_adc_iio_channels[] = { >> + ADC_CHANNEL(0, "adc0"), >> + ADC_CHANNEL(1, "adc1"), >> + ADC_CHANNEL(2, "adc2"), >> + ADC_CHANNEL(3, "adc3"), >> + ADC_CHANNEL(4, "adc4"), >> + ADC_CHANNEL(5, "adc5"), >> + ADC_CHANNEL(6, "adc6"), >> + ADC_CHANNEL(7, "adc7"), >> + ADC_CHANNEL(8, "adc8"), >> + ADC_CHANNEL(9, "adc9"), >> +}; >> + >> +static int exynos_adc_remove_devices(struct device *dev, void *c) >> +{ >> + struct platform_device *pdev = to_platform_device(dev); >> + >> + platform_device_unregister(pdev); >> + >> + return 0; >> +} >> + >> +static void exynos_adc_hw_init(struct exynos_adc *info) >> +{ >> + u32 con1, con2; >> + >> + if (info->version == ADC_V2) { >> + con1 = ADC_V2_CON1_SOFT_RESET; >> + writel(con1, ADC_V2_CON1(info->regs)); >> + >> + con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | >> + ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); >> + writel(con2, ADC_V2_CON2(info->regs)); >> + >> + /* Enable interrupts */ >> + writel(1, ADC_V2_INT_EN(info->regs)); >> + } else { >> + /* set default prescaler values and Enable prescaler */ >> + con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; >> + >> + /* Enable 12-bit ADC resolution */ >> + con1 |= ADC_V1_CON_RES; >> + writel(con1, ADC_V1_CON(info->regs)); >> + } >> +} >> + >> +static int exynos_adc_probe(struct platform_device *pdev) >> +{ >> + struct exynos_adc *info = NULL; >> + struct device_node *np = pdev->dev.of_node; >> + struct iio_dev *indio_dev = NULL; >> + struct resource *mem; >> + int ret = -ENODEV; >> + int irq; >> + >> + if (!np) >> + return ret; >> + >> + indio_dev = iio_device_alloc(sizeof(struct exynos_adc)); >> + if (!indio_dev) { >> + dev_err(&pdev->dev, "failed allocating iio device\n"); >> + return -ENOMEM; >> + } >> + >> + info = iio_priv(indio_dev); >> + >> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + >> + info->regs = devm_request_and_ioremap(&pdev->dev, mem); >> + if (!info->regs) { >> + ret = -ENOMEM; >> + goto err_iio; >> + } >> + >> + irq = platform_get_irq(pdev, 0); >> + if (irq < 0) { >> + dev_err(&pdev->dev, "no irq resource?\n"); >> + ret = irq; >> + goto err_iio; >> + } >> + >> + info->irq = irq; >> + >> + init_completion(&info->completion); >> + >> + ret = request_irq(info->irq, exynos_adc_isr, >> + 0, dev_name(&pdev->dev), info); >> + if (ret < 0) { >> + dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", >> + info->irq); >> + goto err_iio; >> + } >> + >> + info->clk = devm_clk_get(&pdev->dev, "adc"); >> + if (IS_ERR(info->clk)) { >> + dev_err(&pdev->dev, "failed getting clock, err = %ld\n", >> + PTR_ERR(info->clk)); >> + ret = PTR_ERR(info->clk); >> + goto err_irq; >> + } >> + >> + info->vdd = devm_regulator_get(&pdev->dev, "vdd"); >> + if (IS_ERR(info->vdd)) { >> + dev_err(&pdev->dev, "failed getting regulator, err = %ld\n", >> + PTR_ERR(info->vdd)); >> + ret = PTR_ERR(info->vdd); >> + goto err_irq; >> + } >> + >> + info->version = exynos_adc_get_version(pdev); >> + >> + platform_set_drvdata(pdev, indio_dev); >> + >> + indio_dev->name = dev_name(&pdev->dev); >> + indio_dev->dev.parent = &pdev->dev; >> + indio_dev->dev.of_node = pdev->dev.of_node; >> + indio_dev->info = &exynos_adc_iio_info; >> + indio_dev->modes = INDIO_DIRECT_MODE; >> + indio_dev->channels = exynos_adc_iio_channels; >> + >> + if (info->version == ADC_V1) >> + indio_dev->num_channels = MAX_ADC_V1_CHANNELS; >> + else >> + indio_dev->num_channels = MAX_ADC_V2_CHANNELS; >> + >> + ret = iio_device_register(indio_dev); >> + if (ret) >> + goto err_irq; >> + >> + ret = regulator_enable(info->vdd); >> + if (ret) >> + goto err_iio_dev; >> + >> + clk_prepare_enable(info->clk); >> + >> + exynos_adc_hw_init(info); >> + >> + ret = of_platform_populate(np, exynos_adc_match, NULL, &pdev->dev); >> + if (ret < 0) { >> + dev_err(&pdev->dev, "failed adding child nodes\n"); >> + goto err_of_populate; >> + } >> + >> + return 0; >> + >> +err_of_populate: >> + device_for_each_child(&pdev->dev, NULL, >> + exynos_adc_remove_devices); >> + regulator_disable(info->vdd); >> + clk_disable_unprepare(info->clk); >> +err_iio_dev: >> + iio_device_unregister(indio_dev); >> +err_irq: >> + free_irq(info->irq, info); >> +err_iio: >> + iio_device_free(indio_dev); >> + return ret; >> +} >> + >> +static int exynos_adc_remove(struct platform_device *pdev) >> +{ >> + struct iio_dev *indio_dev = platform_get_drvdata(pdev); >> + struct exynos_adc *info = iio_priv(indio_dev); >> + >> + device_for_each_child(&pdev->dev, NULL, >> + exynos_adc_remove_devices); >> + regulator_disable(info->vdd); >> + clk_disable_unprepare(info->clk); >> + iio_device_unregister(indio_dev); >> + free_irq(info->irq, info); >> + iio_device_free(indio_dev); >> + >> + return 0; >> +} >> + >> +#ifdef CONFIG_PM_SLEEP >> +static int exynos_adc_suspend(struct device *dev) >> +{ >> + struct platform_device *pdev = to_platform_device(dev); >> + struct exynos_adc *info = platform_get_drvdata(pdev); >> + u32 con; >> + >> + if (info->version == ADC_V2) { >> + con = readl(ADC_V2_CON1(info->regs)); >> + con &= ~ADC_CON_EN_START; >> + writel(con, ADC_V2_CON1(info->regs)); >> + } else { >> + con = readl(ADC_V1_CON(info->regs)); >> + con |= ADC_V1_CON_STANDBY; >> + writel(con, ADC_V1_CON(info->regs)); >> + } >> + >> + clk_disable_unprepare(info->clk); >> + regulator_disable(info->vdd); >> + >> + return 0; >> +} >> + >> +static int exynos_adc_resume(struct device *dev) >> +{ >> + struct platform_device *pdev = to_platform_device(dev); >> + struct exynos_adc *info = platform_get_drvdata(pdev); >> + int ret; >> + >> + ret = regulator_enable(info->vdd); >> + if (ret) >> + return ret; >> + >> + clk_prepare_enable(info->clk); >> + >> + exynos_adc_hw_init(info); >> + >> + return 0; >> +} >> +#endif >> + >> +static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops, >> + exynos_adc_suspend, >> + exynos_adc_resume); >> + >> +static struct platform_driver exynos_adc_driver = { >> + .probe = exynos_adc_probe, >> + .remove = exynos_adc_remove, >> + .driver = { >> + .name = "exynos-adc", >> + .owner = THIS_MODULE, >> + .of_match_table = of_match_ptr(exynos_adc_match), >> + .pm = &exynos_adc_pm_ops, >> + }, >> +}; >> + >> +module_platform_driver(exynos_adc_driver); >> + >> +MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>"); >> +MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver"); >> +MODULE_LICENSE("GPL v2"); > -- Shine bright, (: Nav :) -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/15/2013 02:17 PM, Naveen Krishna Ch wrote: > On 15 February 2013 18:43, Lars-Peter Clausen <lars@metafoo.de> wrote: >> On 02/15/2013 07:56 AM, Naveen Krishna Chatradhi wrote: >>> This patch adds New driver to support: >>> 1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 >>> and future SoCs from Samsung >>> 2. Add ADC driver under iio/adc framework >>> 3. Also adds the Documentation for device tree bindings >>> >>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> >> >> Looks good. >> >> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> >> >> One minor thing though, there are a couple of places where you break a line >> into multiple lines, even though the line fits easily inside the 80 chars >> per line limit. In my opinion this doesn't help the legibility of the code. >> E.g.: >> >> + info->value = readl(ADC_V1_DATX(info->regs)) & >> + ADC_DATX_MASK; >> >> There is no need to respin the patch just for this, but if you happen to >> make another version of the patch, that's something to consider. >> >>> --- >>> Changes since v1: >>> >>> 1. Fixed comments from Lars >>> 2. Added support for ADC on EXYNOS5410 >>> >>> Changes since v2: >>> >>> 1. Changed the instance name for (struct iio_dev *) to indio_dev >>> 2. Changed devm_request_irq to request_irq >>> >>> Few doubts regarding the mappings and child device handling. >>> Kindly, suggest me better methods. >>> >>> Changes since v3: >>> >>> 1. Added clk_prepare_disable and regulator_disable calls in _remove() >>> 2. Moved init_completion before irq_request >>> 3. Added NULL pointer check for devm_request_and_ioremap() return value. >>> 4. Use number of channels as per the ADC version >>> 5. Change the define ADC_V1_CHANNEL to ADC_CHANNEL >>> 6. Update the Documentation to include EXYNOS5410 compatible >>> >>> Changes since v4: >>> >>> 1. if devm_request_and_ioremap() failes, free iio_device before returning >>> >>> Changes since v5: >>> >>> 1. Fixed comments from Olof (ADC hardware version handling) >>> 2. Rebased on top of comming OF framework for IIO by "Guenter Roeck". >>> >>> Changes since v6: >>> >>> 1. Addressed comments from Lars-Peter Clausen >> >> >> btw. these kind of change logs are not really helpful, it would be better to >> list the actual changes made. > Hello Lars, > > No other changes from my side. But, I can send another version. > Do you want me to list the latest change alone instead of the whole > change list ? Hi, No need to resend the patch, this is just something to consider for the future. A changelog entry which reads like "Addressed Jon Does comments" is not really useful since most people will probably not know or not longer remember all the details of those comments, instead a nice list of all the changes which have been made is much better. E.g.: Changes since v6: * Fixed debugfs_read_reg * Introduced timeout when waiting for the data ready IRQ * Slightly reformatted exynos_read_raw for better legibility - Lars -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 15 February 2013 18:56, Lars-Peter Clausen <lars@metafoo.de> wrote: > On 02/15/2013 02:17 PM, Naveen Krishna Ch wrote: >> On 15 February 2013 18:43, Lars-Peter Clausen <lars@metafoo.de> wrote: >>> On 02/15/2013 07:56 AM, Naveen Krishna Chatradhi wrote: >>>> This patch adds New driver to support: >>>> 1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 >>>> and future SoCs from Samsung >>>> 2. Add ADC driver under iio/adc framework >>>> 3. Also adds the Documentation for device tree bindings >>>> >>>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> >>> >>> Looks good. >>> >>> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> >>> >>> One minor thing though, there are a couple of places where you break a line >>> into multiple lines, even though the line fits easily inside the 80 chars >>> per line limit. In my opinion this doesn't help the legibility of the code. >>> E.g.: >>> >>> + info->value = readl(ADC_V1_DATX(info->regs)) & >>> + ADC_DATX_MASK; >>> >>> There is no need to respin the patch just for this, but if you happen to >>> make another version of the patch, that's something to consider. >>> >>>> --- >>>> Changes since v1: >>>> >>>> 1. Fixed comments from Lars >>>> 2. Added support for ADC on EXYNOS5410 >>>> >>>> Changes since v2: >>>> >>>> 1. Changed the instance name for (struct iio_dev *) to indio_dev >>>> 2. Changed devm_request_irq to request_irq >>>> >>>> Few doubts regarding the mappings and child device handling. >>>> Kindly, suggest me better methods. >>>> >>>> Changes since v3: >>>> >>>> 1. Added clk_prepare_disable and regulator_disable calls in _remove() >>>> 2. Moved init_completion before irq_request >>>> 3. Added NULL pointer check for devm_request_and_ioremap() return value. >>>> 4. Use number of channels as per the ADC version >>>> 5. Change the define ADC_V1_CHANNEL to ADC_CHANNEL >>>> 6. Update the Documentation to include EXYNOS5410 compatible >>>> >>>> Changes since v4: >>>> >>>> 1. if devm_request_and_ioremap() failes, free iio_device before returning >>>> >>>> Changes since v5: >>>> >>>> 1. Fixed comments from Olof (ADC hardware version handling) >>>> 2. Rebased on top of comming OF framework for IIO by "Guenter Roeck". >>>> >>>> Changes since v6: >>>> >>>> 1. Addressed comments from Lars-Peter Clausen >>> >>> >>> btw. these kind of change logs are not really helpful, it would be better to >>> list the actual changes made. >> Hello Lars, >> >> No other changes from my side. But, I can send another version. >> Do you want me to list the latest change alone instead of the whole >> change list ? > > Hi, > > No need to resend the patch, this is just something to consider for the > future. A changelog entry which reads like "Addressed Jon Does comments" is > not really useful since most people will probably not know or not longer > remember all the details of those comments, instead a nice list of all the > changes which have been made is much better. E.g.: > > Changes since v6: > * Fixed debugfs_read_reg > * Introduced timeout when waiting for the data ready IRQ > * Slightly reformatted exynos_read_raw for better legibility > > - Lars Thanks for your comments and valuable time. Sure Lars, Will do it. > > -- Shine bright, (: Nav :) -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/15/2013 01:35 PM, Naveen Krishna Ch wrote: > On 15 February 2013 18:56, Lars-Peter Clausen <lars@metafoo.de> wrote: >> On 02/15/2013 02:17 PM, Naveen Krishna Ch wrote: >>> On 15 February 2013 18:43, Lars-Peter Clausen <lars@metafoo.de> wrote: >>>> On 02/15/2013 07:56 AM, Naveen Krishna Chatradhi wrote: >>>>> This patch adds New driver to support: >>>>> 1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 >>>>> and future SoCs from Samsung >>>>> 2. Add ADC driver under iio/adc framework >>>>> 3. Also adds the Documentation for device tree bindings >>>>> >>>>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> >>>> >>>> Looks good. >>>> >>>> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Applied to togreg branch of iio.git Thanks, >>>> >>>> One minor thing though, there are a couple of places where you break a line >>>> into multiple lines, even though the line fits easily inside the 80 chars >>>> per line limit. In my opinion this doesn't help the legibility of the code. >>>> E.g.: >>>> >>>> + info->value = readl(ADC_V1_DATX(info->regs)) & >>>> + ADC_DATX_MASK; >>>> >>>> There is no need to respin the patch just for this, but if you happen to >>>> make another version of the patch, that's something to consider. >>>> >>>>> --- >>>>> Changes since v1: >>>>> >>>>> 1. Fixed comments from Lars >>>>> 2. Added support for ADC on EXYNOS5410 >>>>> >>>>> Changes since v2: >>>>> >>>>> 1. Changed the instance name for (struct iio_dev *) to indio_dev >>>>> 2. Changed devm_request_irq to request_irq >>>>> >>>>> Few doubts regarding the mappings and child device handling. >>>>> Kindly, suggest me better methods. >>>>> >>>>> Changes since v3: >>>>> >>>>> 1. Added clk_prepare_disable and regulator_disable calls in _remove() >>>>> 2. Moved init_completion before irq_request >>>>> 3. Added NULL pointer check for devm_request_and_ioremap() return value. >>>>> 4. Use number of channels as per the ADC version >>>>> 5. Change the define ADC_V1_CHANNEL to ADC_CHANNEL >>>>> 6. Update the Documentation to include EXYNOS5410 compatible >>>>> >>>>> Changes since v4: >>>>> >>>>> 1. if devm_request_and_ioremap() failes, free iio_device before returning >>>>> >>>>> Changes since v5: >>>>> >>>>> 1. Fixed comments from Olof (ADC hardware version handling) >>>>> 2. Rebased on top of comming OF framework for IIO by "Guenter Roeck". >>>>> >>>>> Changes since v6: >>>>> >>>>> 1. Addressed comments from Lars-Peter Clausen >>>> >>>> >>>> btw. these kind of change logs are not really helpful, it would be better to >>>> list the actual changes made. >>> Hello Lars, >>> >>> No other changes from my side. But, I can send another version. >>> Do you want me to list the latest change alone instead of the whole >>> change list ? >> >> Hi, >> >> No need to resend the patch, this is just something to consider for the >> future. A changelog entry which reads like "Addressed Jon Does comments" is >> not really useful since most people will probably not know or not longer >> remember all the details of those comments, instead a nice list of all the >> changes which have been made is much better. E.g.: >> >> Changes since v6: >> * Fixed debugfs_read_reg >> * Introduced timeout when waiting for the data ready IRQ >> * Slightly reformatted exynos_read_raw for better legibility >> >> - Lars > > Thanks for your comments and valuable time. > Sure Lars, Will do it. >> >> > > > > -- > Shine bright, > (: Nav :) > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt new file mode 100644 index 0000000..f686378 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt @@ -0,0 +1,52 @@ +Samsung Exynos Analog to Digital Converter bindings + +This devicetree binding are for the new adc driver written fori +Exynos4 and upward SoCs from Samsung. + +New driver handles the following +1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 + and future SoCs from Samsung +2. Add ADC driver under iio/adc framework +3. Also adds the Documentation for device tree bindings + +Required properties: +- compatible: Must be "samsung,exynos-adc-v1" + for exynos4412/5250 controllers. + Must be "samsung,exynos-adc-v2" for + future controllers. +- reg: Contains ADC register address range (base address and + length). +- interrupts: Contains the interrupt information for the timer. The + format is being dependent on which interrupt controller + the Samsung device uses. +- #io-channel-cells = <1>; As ADC has multiple outputs + +Note: child nodes can be added for auto probing from device tree. + +Example: adding device info in dtsi file + +adc: adc@12D10000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x12D10000 0x100>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; +}; + + +Example: Adding child nodes in dts file + +adc@12D10000 { + + /* NTC thermistor is a hwmon device */ + ncp15wb473@0 { + compatible = "ntc,ncp15wb473"; + pullup-uV = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; +}; + +Note: Does not apply to ADC driver under arch/arm/plat-samsung/ +Note: The child node can be added under the adc node or seperately. diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index e372257..04311f8 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -91,6 +91,13 @@ config AT91_ADC help Say yes here to build support for Atmel AT91 ADC. +config EXYNOS_ADC + bool "Exynos ADC driver support" + help + Core support for the ADC block found in the Samsung EXYNOS series + of SoCs for drivers such as the touchscreen and hwmon to use to share + this resource. + config LP8788_ADC bool "LP8788 ADC driver" depends on MFD_LP8788 diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 2d5f100..fabac2c 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_AD7791) += ad7791.o obj-$(CONFIG_AD7793) += ad7793.o obj-$(CONFIG_AD7887) += ad7887.o obj-$(CONFIG_AT91_ADC) += at91_adc.o +obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_MAX1363) += max1363.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c new file mode 100644 index 0000000..ed6fdd7 --- /dev/null +++ b/drivers/iio/adc/exynos_adc.c @@ -0,0 +1,440 @@ +/* + * exynos_adc.c - Support for ADC in EXYNOS SoCs + * + * 8 ~ 10 channel, 10/12-bit ADC + * + * Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/regulator/consumer.h> +#include <linux/of_platform.h> + +#include <linux/iio/iio.h> +#include <linux/iio/machine.h> +#include <linux/iio/driver.h> + +enum adc_version { + ADC_V1, + ADC_V2 +}; + +/* EXYNOS4412/5250 ADC_V1 registers definitions */ +#define ADC_V1_CON(x) ((x) + 0x00) +#define ADC_V1_DLY(x) ((x) + 0x08) +#define ADC_V1_DATX(x) ((x) + 0x0C) +#define ADC_V1_INTCLR(x) ((x) + 0x18) +#define ADC_V1_MUX(x) ((x) + 0x1c) + +/* Future ADC_V2 registers definitions */ +#define ADC_V2_CON1(x) ((x) + 0x00) +#define ADC_V2_CON2(x) ((x) + 0x04) +#define ADC_V2_STAT(x) ((x) + 0x08) +#define ADC_V2_INT_EN(x) ((x) + 0x10) +#define ADC_V2_INT_ST(x) ((x) + 0x14) +#define ADC_V2_VER(x) ((x) + 0x20) + +/* Bit definitions for ADC_V1 */ +#define ADC_V1_CON_RES (1u << 16) +#define ADC_V1_CON_PRSCEN (1u << 14) +#define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6) +#define ADC_V1_CON_STANDBY (1u << 2) + +/* Bit definitions for ADC_V2 */ +#define ADC_V2_CON1_SOFT_RESET (1u << 2) + +#define ADC_V2_CON2_OSEL (1u << 10) +#define ADC_V2_CON2_ESEL (1u << 9) +#define ADC_V2_CON2_HIGHF (1u << 8) +#define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4) +#define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0) +#define ADC_V2_CON2_ACH_MASK 0xF + +#define MAX_ADC_V2_CHANNELS 10 +#define MAX_ADC_V1_CHANNELS 8 + +/* Bit definitions common for ADC_V1 and ADC_V2 */ +#define ADC_CON_EN_START (1u << 0) +#define ADC_DATX_MASK 0xFFF + +#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000)) + +struct exynos_adc { + void __iomem *regs; + struct clk *clk; + unsigned int irq; + struct regulator *vdd; + + struct completion completion; + + u32 value; + unsigned int version; +}; + +static const struct of_device_id exynos_adc_match[] = { + { .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 }, + { .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 }, + {}, +}; +MODULE_DEVICE_TABLE(of, exynos_adc_match); + +static inline unsigned int exynos_adc_get_version(struct platform_device *pdev) +{ + const struct of_device_id *match; + + match = of_match_node(exynos_adc_match, pdev->dev.of_node); + return (unsigned int)match->data; +} + +static int exynos_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct exynos_adc *info = iio_priv(indio_dev); + unsigned long timeout; + u32 con1, con2; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + mutex_lock(&indio_dev->mlock); + + /* Select the channel to be used and Trigger conversion */ + if (info->version == ADC_V2) { + con2 = readl(ADC_V2_CON2(info->regs)); + con2 &= ~ADC_V2_CON2_ACH_MASK; + con2 |= ADC_V2_CON2_ACH_SEL(chan->address); + writel(con2, ADC_V2_CON2(info->regs)); + + con1 = readl(ADC_V2_CON1(info->regs)); + writel(con1 | ADC_CON_EN_START, + ADC_V2_CON1(info->regs)); + } else { + writel(chan->address, ADC_V1_MUX(info->regs)); + + con1 = readl(ADC_V1_CON(info->regs)); + writel(con1 | ADC_CON_EN_START, + ADC_V1_CON(info->regs)); + } + + timeout = wait_for_completion_interruptible_timeout + (&info->completion, EXYNOS_ADC_TIMEOUT); + *val = info->value; + + mutex_unlock(&indio_dev->mlock); + + if (timeout == 0) + return -ETIMEDOUT; + + return IIO_VAL_INT; +} + +static irqreturn_t exynos_adc_isr(int irq, void *dev_id) +{ + struct exynos_adc *info = (struct exynos_adc *)dev_id; + + /* Read value */ + info->value = readl(ADC_V1_DATX(info->regs)) & + ADC_DATX_MASK; + /* clear irq */ + if (info->version == ADC_V2) + writel(1, ADC_V2_INT_ST(info->regs)); + else + writel(1, ADC_V1_INTCLR(info->regs)); + + complete(&info->completion); + + return IRQ_HANDLED; +} + +static int exynos_adc_reg_access(struct iio_dev *indio_dev, + unsigned reg, unsigned writeval, + unsigned *readval) +{ + struct exynos_adc *info = iio_priv(indio_dev); + + if (readval == NULL) + return -EINVAL; + + *readval = readl(info->regs + reg); + + return 0; +} + +static const struct iio_info exynos_adc_iio_info = { + .read_raw = &exynos_read_raw, + .debugfs_reg_access = &exynos_adc_reg_access, + .driver_module = THIS_MODULE, +}; + +#define ADC_CHANNEL(_index, _id) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = _index, \ + .address = _index, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ + .datasheet_name = _id, \ +} + +static const struct iio_chan_spec exynos_adc_iio_channels[] = { + ADC_CHANNEL(0, "adc0"), + ADC_CHANNEL(1, "adc1"), + ADC_CHANNEL(2, "adc2"), + ADC_CHANNEL(3, "adc3"), + ADC_CHANNEL(4, "adc4"), + ADC_CHANNEL(5, "adc5"), + ADC_CHANNEL(6, "adc6"), + ADC_CHANNEL(7, "adc7"), + ADC_CHANNEL(8, "adc8"), + ADC_CHANNEL(9, "adc9"), +}; + +static int exynos_adc_remove_devices(struct device *dev, void *c) +{ + struct platform_device *pdev = to_platform_device(dev); + + platform_device_unregister(pdev); + + return 0; +} + +static void exynos_adc_hw_init(struct exynos_adc *info) +{ + u32 con1, con2; + + if (info->version == ADC_V2) { + con1 = ADC_V2_CON1_SOFT_RESET; + writel(con1, ADC_V2_CON1(info->regs)); + + con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | + ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); + writel(con2, ADC_V2_CON2(info->regs)); + + /* Enable interrupts */ + writel(1, ADC_V2_INT_EN(info->regs)); + } else { + /* set default prescaler values and Enable prescaler */ + con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; + + /* Enable 12-bit ADC resolution */ + con1 |= ADC_V1_CON_RES; + writel(con1, ADC_V1_CON(info->regs)); + } +} + +static int exynos_adc_probe(struct platform_device *pdev) +{ + struct exynos_adc *info = NULL; + struct device_node *np = pdev->dev.of_node; + struct iio_dev *indio_dev = NULL; + struct resource *mem; + int ret = -ENODEV; + int irq; + + if (!np) + return ret; + + indio_dev = iio_device_alloc(sizeof(struct exynos_adc)); + if (!indio_dev) { + dev_err(&pdev->dev, "failed allocating iio device\n"); + return -ENOMEM; + } + + info = iio_priv(indio_dev); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + info->regs = devm_request_and_ioremap(&pdev->dev, mem); + if (!info->regs) { + ret = -ENOMEM; + goto err_iio; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq resource?\n"); + ret = irq; + goto err_iio; + } + + info->irq = irq; + + init_completion(&info->completion); + + ret = request_irq(info->irq, exynos_adc_isr, + 0, dev_name(&pdev->dev), info); + if (ret < 0) { + dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", + info->irq); + goto err_iio; + } + + info->clk = devm_clk_get(&pdev->dev, "adc"); + if (IS_ERR(info->clk)) { + dev_err(&pdev->dev, "failed getting clock, err = %ld\n", + PTR_ERR(info->clk)); + ret = PTR_ERR(info->clk); + goto err_irq; + } + + info->vdd = devm_regulator_get(&pdev->dev, "vdd"); + if (IS_ERR(info->vdd)) { + dev_err(&pdev->dev, "failed getting regulator, err = %ld\n", + PTR_ERR(info->vdd)); + ret = PTR_ERR(info->vdd); + goto err_irq; + } + + info->version = exynos_adc_get_version(pdev); + + platform_set_drvdata(pdev, indio_dev); + + indio_dev->name = dev_name(&pdev->dev); + indio_dev->dev.parent = &pdev->dev; + indio_dev->dev.of_node = pdev->dev.of_node; + indio_dev->info = &exynos_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = exynos_adc_iio_channels; + + if (info->version == ADC_V1) + indio_dev->num_channels = MAX_ADC_V1_CHANNELS; + else + indio_dev->num_channels = MAX_ADC_V2_CHANNELS; + + ret = iio_device_register(indio_dev); + if (ret) + goto err_irq; + + ret = regulator_enable(info->vdd); + if (ret) + goto err_iio_dev; + + clk_prepare_enable(info->clk); + + exynos_adc_hw_init(info); + + ret = of_platform_populate(np, exynos_adc_match, NULL, &pdev->dev); + if (ret < 0) { + dev_err(&pdev->dev, "failed adding child nodes\n"); + goto err_of_populate; + } + + return 0; + +err_of_populate: + device_for_each_child(&pdev->dev, NULL, + exynos_adc_remove_devices); + regulator_disable(info->vdd); + clk_disable_unprepare(info->clk); +err_iio_dev: + iio_device_unregister(indio_dev); +err_irq: + free_irq(info->irq, info); +err_iio: + iio_device_free(indio_dev); + return ret; +} + +static int exynos_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct exynos_adc *info = iio_priv(indio_dev); + + device_for_each_child(&pdev->dev, NULL, + exynos_adc_remove_devices); + regulator_disable(info->vdd); + clk_disable_unprepare(info->clk); + iio_device_unregister(indio_dev); + free_irq(info->irq, info); + iio_device_free(indio_dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int exynos_adc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct exynos_adc *info = platform_get_drvdata(pdev); + u32 con; + + if (info->version == ADC_V2) { + con = readl(ADC_V2_CON1(info->regs)); + con &= ~ADC_CON_EN_START; + writel(con, ADC_V2_CON1(info->regs)); + } else { + con = readl(ADC_V1_CON(info->regs)); + con |= ADC_V1_CON_STANDBY; + writel(con, ADC_V1_CON(info->regs)); + } + + clk_disable_unprepare(info->clk); + regulator_disable(info->vdd); + + return 0; +} + +static int exynos_adc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct exynos_adc *info = platform_get_drvdata(pdev); + int ret; + + ret = regulator_enable(info->vdd); + if (ret) + return ret; + + clk_prepare_enable(info->clk); + + exynos_adc_hw_init(info); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops, + exynos_adc_suspend, + exynos_adc_resume); + +static struct platform_driver exynos_adc_driver = { + .probe = exynos_adc_probe, + .remove = exynos_adc_remove, + .driver = { + .name = "exynos-adc", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(exynos_adc_match), + .pm = &exynos_adc_pm_ops, + }, +}; + +module_platform_driver(exynos_adc_driver); + +MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>"); +MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver"); +MODULE_LICENSE("GPL v2");
This patch adds New driver to support: 1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 and future SoCs from Samsung 2. Add ADC driver under iio/adc framework 3. Also adds the Documentation for device tree bindings Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> --- Changes since v1: 1. Fixed comments from Lars 2. Added support for ADC on EXYNOS5410 Changes since v2: 1. Changed the instance name for (struct iio_dev *) to indio_dev 2. Changed devm_request_irq to request_irq Few doubts regarding the mappings and child device handling. Kindly, suggest me better methods. Changes since v3: 1. Added clk_prepare_disable and regulator_disable calls in _remove() 2. Moved init_completion before irq_request 3. Added NULL pointer check for devm_request_and_ioremap() return value. 4. Use number of channels as per the ADC version 5. Change the define ADC_V1_CHANNEL to ADC_CHANNEL 6. Update the Documentation to include EXYNOS5410 compatible Changes since v4: 1. if devm_request_and_ioremap() failes, free iio_device before returning Changes since v5: 1. Fixed comments from Olof (ADC hardware version handling) 2. Rebased on top of comming OF framework for IIO by "Guenter Roeck". Changes since v6: 1. Addressed comments from Lars-Peter Clausen .../bindings/arm/samsung/exynos5-adc.txt | 42 ++ drivers/iio/adc/Kconfig | 7 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/exynos_adc.c | 438 ++++++++++++++++++++ 4 files changed, 488 insertions(+) .../devicetree/bindings/arm/samsung/exynos-adc.txt | 52 +++ drivers/iio/adc/Kconfig | 7 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/exynos_adc.c | 440 ++++++++++++++++++++ 4 files changed, 500 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt create mode 100644 drivers/iio/adc/exynos_adc.c