diff mbox

[v2] fbdev: Add Renesas vdc4 framebuffer driver

Message ID 1347267372-22949-1-git-send-email-phil.edworthy@renesas.com (mailing list archive)
State Awaiting Upstream
Headers show

Commit Message

Phil Edworthy Sept. 10, 2012, 8:56 a.m. UTC
The vdc4 display hardware is found on the sh7269 device.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
---
v2:
 * Use devm_ variants of clk_get, ioremap_nocache, request_irq.
 * Replace spaces with tabs.
 * Check ren_vdc4_start return value.
 * Fix headers used.

 drivers/video/Kconfig      |   10 +
 drivers/video/Makefile     |    1 +
 drivers/video/ren_vdc4fb.c |  641 ++++++++++++++++++++++++++++++++++++++++++++
 include/video/ren_vdc4fb.h |   19 ++
 4 files changed, 671 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/ren_vdc4fb.c
 create mode 100644 include/video/ren_vdc4fb.h

Comments

Jingoo Han Sept. 11, 2012, 2:31 a.m. UTC | #1
On Monday, September 10, 2012 5:56 PM Phil Edworthy wrote
> 
> The vdc4 display hardware is found on the sh7269 device.
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>


Reviewed-by: Jingoo Han <jg1.han@samsung.com>

Best regards,
Jingoo Han


> ---
> v2:
>  * Use devm_ variants of clk_get, ioremap_nocache, request_irq.
>  * Replace spaces with tabs.
>  * Check ren_vdc4_start return value.
>  * Fix headers used.
> 
>  drivers/video/Kconfig      |   10 +
>  drivers/video/Makefile     |    1 +
>  drivers/video/ren_vdc4fb.c |  641 ++++++++++++++++++++++++++++++++++++++++++++
>  include/video/ren_vdc4fb.h |   19 ++
>  4 files changed, 671 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/video/ren_vdc4fb.c
>  create mode 100644 include/video/ren_vdc4fb.h


--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Phil Edworthy Oct. 5, 2012, 4:34 p.m. UTC | #2
Hi,

Any news on this patch?

Thanks
Phil

> From: Jingoo Han <jg1.han@samsung.com>
> To: "'Phil Edworthy'" <phil.edworthy@renesas.com>, 
> Cc: "'Florian Tobias Schandinat'" <FlorianSchandinat@gmx.de>, linux-
> fbdev@vger.kernel.org, linux-sh@vger.kernel.org, "'Jingoo Han'" 
> <jg1.han@samsung.com>
> Date: 11/09/2012 03:31
> Subject: Re: [PATCH v2] fbdev: Add Renesas vdc4 framebuffer driver
> 
> On Monday, September 10, 2012 5:56 PM Phil Edworthy wrote
> > 
> > The vdc4 display hardware is found on the sh7269 device.
> > 
> > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> 
> 
> Reviewed-by: Jingoo Han <jg1.han@samsung.com>
> 
> Best regards,
> Jingoo Han
> 
> 
> > ---
> > v2:
> >  * Use devm_ variants of clk_get, ioremap_nocache, request_irq.
> >  * Replace spaces with tabs.
> >  * Check ren_vdc4_start return value.
> >  * Fix headers used.
> > 
> >  drivers/video/Kconfig      |   10 +
> >  drivers/video/Makefile     |    1 +
> >  drivers/video/ren_vdc4fb.c |  641 +++++++++++++++++++++++++++++++
> +++++++++++++
> >  include/video/ren_vdc4fb.h |   19 ++
> >  4 files changed, 671 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/video/ren_vdc4fb.c
> >  create mode 100644 include/video/ren_vdc4fb.h
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Simon Horman Feb. 16, 2013, 2:04 a.m. UTC | #3
On Fri, Oct 05, 2012 at 05:34:54PM +0100, phil.edworthy@renesas.com wrote:
> Hi,
> 
> Any news on this patch?

Phil, did this patch get merged in the end?

> 
> Thanks
> Phil
> 
> > From: Jingoo Han <jg1.han@samsung.com>
> > To: "'Phil Edworthy'" <phil.edworthy@renesas.com>, 
> > Cc: "'Florian Tobias Schandinat'" <FlorianSchandinat@gmx.de>, linux-
> > fbdev@vger.kernel.org, linux-sh@vger.kernel.org, "'Jingoo Han'" 
> > <jg1.han@samsung.com>
> > Date: 11/09/2012 03:31
> > Subject: Re: [PATCH v2] fbdev: Add Renesas vdc4 framebuffer driver
> > 
> > On Monday, September 10, 2012 5:56 PM Phil Edworthy wrote
> > > 
> > > The vdc4 display hardware is found on the sh7269 device.
> > > 
> > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > 
> > 
> > Reviewed-by: Jingoo Han <jg1.han@samsung.com>
> > 
> > Best regards,
> > Jingoo Han
> > 
> > 
> > > ---
> > > v2:
> > >  * Use devm_ variants of clk_get, ioremap_nocache, request_irq.
> > >  * Replace spaces with tabs.
> > >  * Check ren_vdc4_start return value.
> > >  * Fix headers used.
> > > 
> > >  drivers/video/Kconfig      |   10 +
> > >  drivers/video/Makefile     |    1 +
> > >  drivers/video/ren_vdc4fb.c |  641 +++++++++++++++++++++++++++++++
> > +++++++++++++
> > >  include/video/ren_vdc4fb.h |   19 ++
> > >  4 files changed, 671 insertions(+), 0 deletions(-)
> > >  create mode 100644 drivers/video/ren_vdc4fb.c
> > >  create mode 100644 include/video/ren_vdc4fb.h
> > 
> > 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Phil Edworthy Feb. 18, 2013, 8:14 a.m. UTC | #4
Hi Simon,

> On Fri, Oct 05, 2012 at 05:34:54PM +0100, phil.edworthy@renesas.com 
wrote:
> > Hi,
> > 
> > Any news on this patch?
> 
> Phil, did this patch get merged in the end?
No, I sent a couple of emails to try to get some response but nothing. I 
suspect that it was my fault in that I only realised somewhat later that I 
wasn't signed up to the fbdev ml.

Phil

> > > From: Jingoo Han <jg1.han@samsung.com>
> > > To: "'Phil Edworthy'" <phil.edworthy@renesas.com>, 
> > > Cc: "'Florian Tobias Schandinat'" <FlorianSchandinat@gmx.de>, linux-
> > > fbdev@vger.kernel.org, linux-sh@vger.kernel.org, "'Jingoo Han'" 
> > > <jg1.han@samsung.com>
> > > Date: 11/09/2012 03:31
> > > Subject: Re: [PATCH v2] fbdev: Add Renesas vdc4 framebuffer driver
> > > 
> > > On Monday, September 10, 2012 5:56 PM Phil Edworthy wrote
> > > > 
> > > > The vdc4 display hardware is found on the sh7269 device.
> > > > 
> > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > 
> > > 
> > > Reviewed-by: Jingoo Han <jg1.han@samsung.com>
> > > 
> > > Best regards,
> > > Jingoo Han
> > > 
> > > 
> > > > ---
> > > > v2:
> > > >  * Use devm_ variants of clk_get, ioremap_nocache, request_irq.
> > > >  * Replace spaces with tabs.
> > > >  * Check ren_vdc4_start return value.
> > > >  * Fix headers used.
> > > > 
> > > >  drivers/video/Kconfig      |   10 +
> > > >  drivers/video/Makefile     |    1 +
> > > >  drivers/video/ren_vdc4fb.c |  641 +++++++++++++++++++++++++++++++
> > > +++++++++++++
> > > >  include/video/ren_vdc4fb.h |   19 ++
> > > >  4 files changed, 671 insertions(+), 0 deletions(-)
> > > >  create mode 100644 drivers/video/ren_vdc4fb.c
> > > >  create mode 100644 include/video/ren_vdc4fb.h
> > > 
> > > 
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > 

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0217f74..89c9250 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1990,6 +1990,16 @@  config FB_W100
 
 	  If unsure, say N.
 
+config FB_REN_VDC4FB
+	tristate "Renesas VDC4 framebuffer support"
+	depends on FB && CPU_SUBTYPE_SH7269
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	---help---
+	  Frame buffer driver for the Renesas VDC4.
+
 config FB_SH_MOBILE_LCDC
 	tristate "SuperH Mobile LCDC framebuffer support"
 	depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index ee8dafb..ba69fcb 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -140,6 +140,7 @@  obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
 obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o
 obj-$(CONFIG_FB_SH_MOBILE_MERAM)  += sh_mobile_meram.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
+obj-$(CONFIG_FB_REN_VDC4FB)	  += ren_vdc4fb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-y                             += omap2/
 obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
diff --git a/drivers/video/ren_vdc4fb.c b/drivers/video/ren_vdc4fb.c
new file mode 100644
index 0000000..73daee3
--- /dev/null
+++ b/drivers/video/ren_vdc4fb.c
@@ -0,0 +1,641 @@ 
+/*
+ * Renesas VDC4 Framebuffer
+ *
+ * Based on sh_mobile_lcdcfb.c
+ * Copyright (c) 2012 Renesas Electronics Europe Ltd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <video/ren_vdc4fb.h>
+
+#define PALETTE_NR 16
+
+struct ren_vdc4_priv {
+	void __iomem *base;
+	int irq;
+	struct clk *dot_clk;
+	struct clk *clk;
+	struct fb_info *info;
+	dma_addr_t dma_handle;
+	struct ren_vdc4_info *cfg;
+	u32 pseudo_palette[PALETTE_NR];
+};
+
+/* Register offsets/reading and writing functions */
+enum {
+	SCL0_UPDATE, SCL0_FRC1, SCL0_FRC2, SCL0_FRC3,
+	SCL0_FRC4, SCL0_FRC5, SCL0_FRC6, SCL0_FRC7,
+	SCL0_DS1, SCL0_US1,
+
+	GR1_UPDATE, GR1_AB1,
+
+	GR2_UPDATE, GR2_AB1,
+
+	GR3_UPDATE, GR3_FLM_RD, GR3_FLM1, GR3_FLM2,
+	GR3_FLM3, GR3_FLM4, GR3_FLM5, GR3_FLM6, GR3_AB1,
+	GR3_AB2, GR3_AB3, GR3_AB4, GR3_AB5, GR3_AB6,
+	GR3_AB7, GR3_AB8, GR3_AB9, GR3_AB10, GR3_AB11,
+	GR3_BASE, GR3_CLUT_INT, GR3_MON,
+
+	TCON_UPDATE, TCON_TIM, TCON_TIM_STVA1, TCON_TIM_STVA2,
+	TCON_TIM_STVB1, TCON_TIM_STVB2, TCON_TIM_STH1,
+	TCON_TIM_STH2, TCON_TIM_STB1, TCON_TIM_STB2,
+	TCON_TIM_CPV1, TCON_TIM_CPV2, TCON_TIM_POLA1,
+	TCON_TIM_POLA2, TCON_TIM_POLB1, TCON_TIM_POLB2,
+	TCON_TIM_DE,
+
+	OUT_UPDATE, OUT_SET, OUT_BRIGHT1,
+	OUT_BRIGHT2, OUT_CONTRAST, OUT_PDTHA, OUT_CLK_PHASE,
+
+	SYSCNT_INT1, SYSCNT_INT2, SYSCNT_INT3, SYSCNT_INT4,
+	SYSCNT_PANEL_CLK, SYSCNT_CLUT
+};
+
+static unsigned long vdc4_offsets[] = {
+	[SCL0_UPDATE]		= 0x0100,
+	[SCL0_FRC1]		= 0x0104,
+	[SCL0_FRC2]		= 0x0108,
+	[SCL0_FRC3]		= 0x010C,
+	[SCL0_FRC4]		= 0x0110,
+	[SCL0_FRC5]		= 0x0114,
+	[SCL0_FRC6]		= 0x0118,
+	[SCL0_FRC7]		= 0x011C,
+	[SCL0_DS1]		= 0x012C,
+	[SCL0_US1]		= 0x0148,
+	[GR1_UPDATE]		= 0x0200,
+	[GR1_AB1]		= 0x0220,
+	[GR2_UPDATE]		= 0x0300,
+	[GR2_AB1]		= 0x0320,
+	[GR3_UPDATE]		= 0x0380,
+	[GR3_FLM_RD]		= 0x0384,
+	[GR3_FLM1]		= 0x0388,
+	[GR3_FLM2]		= 0x038C,
+	[GR3_FLM3]		= 0x0390,
+	[GR3_FLM4]		= 0x0394,
+	[GR3_FLM5]		= 0x0398,
+	[GR3_FLM6]		= 0x039C,
+	[GR3_AB1]		= 0x03A0,
+	[GR3_AB2]		= 0x03A4,
+	[GR3_AB3]		= 0x03A8,
+	[GR3_AB4]		= 0x03AC,
+	[GR3_AB5]		= 0x03B0,
+	[GR3_AB6]		= 0x03B4,
+	[GR3_AB7]		= 0x03B8,
+	[GR3_AB8]		= 0x03BC,
+	[GR3_AB9]		= 0x03C0,
+	[GR3_AB10]		= 0x03C4,
+	[GR3_AB11]		= 0x03C8,
+	[GR3_BASE]		= 0x03CC,
+	[GR3_CLUT_INT]		= 0x03D0,
+	[GR3_MON]		= 0x03D4,
+	[TCON_UPDATE]		= 0x0580,
+	[TCON_TIM]		= 0x0584,
+	[TCON_TIM_STVA1]	= 0x0588,
+	[TCON_TIM_STVA2]	= 0x058C,
+	[TCON_TIM_STVB1]	= 0x0590,
+	[TCON_TIM_STVB2]	= 0x0594,
+	[TCON_TIM_STH1]		= 0x0598,
+	[TCON_TIM_STH2]		= 0x059C,
+	[TCON_TIM_STB1]		= 0x05A0,
+	[TCON_TIM_STB2]		= 0x05A4,
+	[TCON_TIM_CPV1]		= 0x05A8,
+	[TCON_TIM_CPV2]		= 0x05AC,
+	[TCON_TIM_POLA1]	= 0x05B0,
+	[TCON_TIM_POLA2]	= 0x05B4,
+	[TCON_TIM_POLB1]	= 0x05B8,
+	[TCON_TIM_POLB2]	= 0x05BC,
+	[TCON_TIM_DE]		= 0x05C0,
+	[OUT_UPDATE]		= 0x0600,
+	[OUT_SET]		= 0x0604,
+	[OUT_BRIGHT1]		= 0x0608,
+	[OUT_BRIGHT2]		= 0x060C,
+	[OUT_CONTRAST]		= 0x0610,
+	[OUT_PDTHA]		= 0x0614,
+	[OUT_CLK_PHASE]		= 0x0624,
+	[SYSCNT_INT1]		= 0x0680,
+	[SYSCNT_INT2]		= 0x0684,
+	[SYSCNT_INT3]		= 0x0688,
+	[SYSCNT_INT4]		= 0x068C,
+	[SYSCNT_PANEL_CLK]	= 0x0690, /* 16-bit */
+	[SYSCNT_CLUT]		= 0x0692, /* 16-bit */
+};
+
+/* SYSCNT */
+#define ICKEN			(1 << 8)
+
+/* SCL Syncs */
+#define FREE_RUN_VSYNC		0x0001
+
+/* OUTPUT */
+#define OUT_FMT_RGB666		(1 << 12)
+
+/* TCON Timings */
+#define STVB_SEL_BITS		0x0007
+#define STVB_HS_SEL		2
+
+#define STH2_SEL_BITS		0x0007
+#define STH2_DE_SEL		7
+
+/* OUTCLK */
+#define LCD_DATA_EDGE		0x0100
+#define STVB_EDGE		0x0020
+#define STH_EDGE		0x0010
+
+/* SCL_UPDATE */
+#define SCL0_UPDATE_BIT		0x0100
+#define SCL0_VEN_BIT		0x0010
+
+/* TCON_UPDATE */
+#define TCON_VEN_BIT		0x0001
+
+/* OUT_UPDATE */
+#define OUTCNT_VEN_BIT		0x0001
+
+/* GR_UPDATE */
+#define P_VEN_UPDATE		0x0010
+#define IBUS_VEN_UPDATE		0x0001
+
+/* GR_AB1 */
+#define DISPSEL_BCKGND		0x0000
+#define DISPSEL_LOWER		0x0001
+#define DISPSEL_CUR		0x0002
+
+/* GR_FLM_RD */
+#define FB_R_ENB		0x01
+
+static void vdc4_write(struct ren_vdc4_priv *priv,
+	unsigned long reg_offs, unsigned long data)
+{
+	if ((SYSCNT_PANEL_CLK == reg_offs) || (SYSCNT_CLUT == reg_offs))
+		iowrite16(data, priv->base + vdc4_offsets[reg_offs]);
+	else
+		iowrite32(data, priv->base + vdc4_offsets[reg_offs]);
+}
+
+static unsigned long vdc4_read(struct ren_vdc4_priv *priv,
+	unsigned long reg_offs)
+{
+	if ((SYSCNT_PANEL_CLK == reg_offs) || (SYSCNT_CLUT == reg_offs))
+		return ioread16(priv->base + vdc4_offsets[reg_offs]);
+	else
+		return ioread32(priv->base + vdc4_offsets[reg_offs]);
+}
+
+static irqreturn_t ren_vdc4_irq(int irq, void *data)
+{
+	/* Not currently implemented/used */
+	return IRQ_HANDLED;
+}
+
+static void lcd_clear_display(struct ren_vdc4_priv *priv)
+{
+	unsigned char *pdest;
+	unsigned long size;
+
+	pdest = (unsigned char *)priv->dma_handle;
+	size = priv->cfg->lcd_cfg.xres * priv->cfg->lcd_cfg.yres * 2;
+
+	memset(pdest, 0, size);
+}
+
+static void restart_tft_display(struct ren_vdc4_priv *priv,
+	int clock_source)
+{
+	struct fb_videomode *lcd;
+	unsigned long h;
+	unsigned long v;
+	unsigned long tmp;
+
+	/* FB setup */
+	lcd = &priv->cfg->lcd_cfg;
+	lcd_clear_display(priv);
+
+	/* VDC clock Setup */
+	tmp = priv->cfg->clock_divider;
+	tmp |= clock_source << 12;
+	tmp |= ICKEN;
+	vdc4_write(priv, SYSCNT_PANEL_CLK, tmp);
+
+	/* Clear and Disable all interrupts */
+	vdc4_write(priv, SYSCNT_INT1, 0);
+	vdc4_write(priv, SYSCNT_INT2, 0);
+	vdc4_write(priv, SYSCNT_INT3, 0);
+	vdc4_write(priv, SYSCNT_INT4, 0);
+
+	/* Setup free-running syncs */
+	vdc4_write(priv, SCL0_FRC3, FREE_RUN_VSYNC);
+
+	/* Disable scale up/down */
+	vdc4_write(priv, SCL0_DS1, 0);
+	vdc4_write(priv, SCL0_US1, 0);
+
+	/* Timing registers */
+	h = lcd->hsync_len + lcd->left_margin  + lcd->xres + lcd->right_margin;
+	v = lcd->vsync_len + lcd->upper_margin + lcd->yres + lcd->lower_margin;
+	tmp = (v - 1) << 16;
+	tmp |= h - 1;
+	vdc4_write(priv, SCL0_FRC4, tmp);
+
+	vdc4_write(priv, TCON_TIM, (((h - 1) / 2) << 16));
+
+	tmp = (lcd->vsync_len + lcd->upper_margin) << 16;
+	tmp |= lcd->yres;
+	vdc4_write(priv, SCL0_FRC6, tmp);
+	vdc4_write(priv, TCON_TIM_STVB1, tmp);
+	vdc4_write(priv, GR3_AB2, tmp);
+
+	tmp = lcd->left_margin << 16;
+	tmp |= lcd->xres;
+	vdc4_write(priv, SCL0_FRC7, tmp);
+	vdc4_write(priv, TCON_TIM_STB1, tmp);
+	vdc4_write(priv, GR3_AB3, tmp);
+
+	vdc4_write(priv, SCL0_FRC1, 0);
+	vdc4_write(priv, SCL0_FRC2, 0);
+	vdc4_write(priv, SCL0_FRC5, 0);
+
+	/* Set output format */
+	vdc4_write(priv, OUT_SET, OUT_FMT_RGB666);
+
+	/* STH TCON Timing */
+	tmp = priv->cfg->hs_pulse_width;
+	tmp |= priv->cfg->hs_start_pos << 16;
+	vdc4_write(priv, TCON_TIM_STH1, tmp);
+
+	/* Setup STVB as HSYNC */
+	tmp = vdc4_read(priv, TCON_TIM_STVB2);
+	tmp &= ~STVB_SEL_BITS;
+	tmp |= STVB_HS_SEL;
+	vdc4_write(priv, TCON_TIM_STVB2, tmp);
+
+	tmp = vdc4_read(priv, OUT_CLK_PHASE);
+	tmp &= ~STVB_EDGE;
+	vdc4_write(priv, OUT_CLK_PHASE, tmp);
+
+	/* Setup STH as DE */
+	tmp = vdc4_read(priv, TCON_TIM_STH2);
+	tmp &= ~STH2_SEL_BITS;
+	tmp |= STH2_DE_SEL;
+	vdc4_write(priv, TCON_TIM_STH2, tmp);
+
+	tmp = vdc4_read(priv, OUT_CLK_PHASE);
+	tmp &= ~STH_EDGE;
+	vdc4_write(priv, OUT_CLK_PHASE, tmp);
+
+	/* Output clock rising edge */
+	tmp = vdc4_read(priv, OUT_CLK_PHASE);
+	tmp &= ~LCD_DATA_EDGE;
+	vdc4_write(priv, OUT_CLK_PHASE, tmp);
+
+	/* Setup graphics buffers and update all registers */
+	vdc4_write(priv, GR1_AB1, DISPSEL_BCKGND);
+	vdc4_write(priv, GR2_AB1, DISPSEL_LOWER);
+	vdc4_write(priv, GR3_AB1, DISPSEL_CUR);
+
+	/* Setup framebuffer base/output */
+	vdc4_write(priv, GR3_FLM_RD, FB_R_ENB);
+
+	vdc4_write(priv, GR3_FLM2, (unsigned long)priv->info->screen_base);
+
+	vdc4_write(priv, GR3_FLM3, (lcd->xres * 2) << 16);
+
+	tmp = vdc4_read(priv, GR3_FLM5);
+	tmp |= lcd->yres << 16;
+	vdc4_write(priv, GR3_FLM5, tmp);
+
+	tmp = lcd->xres << 16;
+	vdc4_write(priv, GR3_FLM6, tmp);
+
+	/* Apply all register settings */
+	vdc4_write(priv, SCL0_UPDATE, SCL0_VEN_BIT | SCL0_UPDATE_BIT);
+	vdc4_write(priv, GR1_UPDATE, P_VEN_UPDATE);
+	vdc4_write(priv, GR2_UPDATE, P_VEN_UPDATE);
+	vdc4_write(priv, GR3_UPDATE, P_VEN_UPDATE | IBUS_VEN_UPDATE);
+	vdc4_write(priv, OUT_UPDATE, OUTCNT_VEN_BIT);
+	vdc4_write(priv, TCON_UPDATE, TCON_VEN_BIT);
+}
+
+static int ren_vdc4_setup_clocks(struct platform_device *pdev,
+	int clock_source,
+	struct ren_vdc4_priv *priv)
+{
+	priv->clk = devm_clk_get(&pdev->dev, "vdc4");
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "cannot get clock \"vdc4\"\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	if (clock_source == VDC4_PERI_CLK) {
+		priv->dot_clk = devm_clk_get(&pdev->dev, "peripheral_clk");
+		if (IS_ERR(priv->dot_clk)) {
+			dev_err(&pdev->dev, "cannot get peripheral clock\n");
+			return PTR_ERR(priv->dot_clk);
+		}
+	}
+
+	return 0;
+}
+
+static int ren_vdc4_setcolreg(u_int regno,
+	u_int red, u_int green, u_int blue,
+	u_int transp, struct fb_info *info)
+{
+	u32 *palette = info->pseudo_palette;
+
+	if (regno >= PALETTE_NR)
+		return -EINVAL;
+
+	/* only FB_VISUAL_TRUECOLOR supported */
+
+	red    >>= 16 - info->var.red.length;
+	green  >>= 16 - info->var.green.length;
+	blue   >>= 16 - info->var.blue.length;
+	transp >>= 16 - info->var.transp.length;
+
+	palette[regno] = (red << info->var.red.offset) |
+		(green << info->var.green.offset) |
+		(blue << info->var.blue.offset) |
+		(transp << info->var.transp.offset);
+
+	return 0;
+}
+
+static struct fb_fix_screeninfo ren_vdc4_fix = {
+	.id		= "Renesas VDC4FB",
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_TRUECOLOR,
+	.accel		= FB_ACCEL_NONE,
+};
+
+static struct fb_ops ren_vdc4_ops = {
+	.owner		= THIS_MODULE,
+	.fb_setcolreg	= ren_vdc4_setcolreg,
+	.fb_read	= fb_sys_read,
+	.fb_write	= fb_sys_write,
+	.fb_fillrect	= sys_fillrect,
+	.fb_copyarea	= sys_copyarea,
+	.fb_imageblit	= sys_imageblit,
+};
+
+static int ren_vdc4_set_bpp(struct fb_var_screeninfo *var, int bpp)
+{
+	switch (bpp) {
+	case 16: /* RGB 565 */
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset = 0;
+		var->blue.length = 5;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	var->bits_per_pixel = bpp;
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
+	var->transp.msb_right = 0;
+	return 0;
+}
+
+/* PM Functions */
+static int ren_vdc4_start(struct ren_vdc4_priv *priv,
+	int clock_source)
+{
+	int ret;
+
+	ret = clk_enable(priv->clk);
+	if (ret < 0)
+		return ret;
+
+	if (priv->dot_clk) {
+		ret = clk_enable(priv->dot_clk);
+		if (ret < 0)
+			return ret;
+	}
+
+	restart_tft_display(priv, clock_source);
+
+	return ret;
+}
+
+static void ren_vdc4_stop(struct ren_vdc4_priv *priv)
+{
+	if (priv->dot_clk)
+		clk_disable(priv->dot_clk);
+	clk_disable(priv->clk);
+}
+
+static int ren_vdc4_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	ren_vdc4_stop(platform_get_drvdata(pdev));
+	return 0;
+}
+
+static int ren_vdc4_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ren_vdc4_info *pdata = pdev->dev.platform_data;
+
+	return ren_vdc4_start(platform_get_drvdata(pdev), pdata->clock_source);
+}
+
+static const struct dev_pm_ops ren_vdc4_dev_pm_ops = {
+	.suspend = ren_vdc4_suspend,
+	.resume = ren_vdc4_resume,
+};
+
+static int ren_vdc4_remove(struct platform_device *pdev);
+
+static int __devinit ren_vdc4_probe(struct platform_device *pdev)
+{
+	struct fb_info *info;
+	struct ren_vdc4_priv *priv;
+	struct ren_vdc4_info *pdata = pdev->dev.platform_data;
+	struct resource *res;
+	void *buf;
+	int irq, error;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!res || irq < 0) {
+		dev_err(&pdev->dev, "cannot get platform resources\n");
+		return -ENOENT;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&pdev->dev, "cannot allocate device data\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	error = devm_request_irq(&pdev->dev, irq, ren_vdc4_irq, 0,
+			dev_name(&pdev->dev), priv);
+	if (error) {
+		dev_err(&pdev->dev, "unable to request irq\n");
+		goto err1;
+	}
+
+	priv->irq = irq;
+	pdata = pdev->dev.platform_data;
+
+	priv->cfg = pdata;
+
+	error = ren_vdc4_setup_clocks(pdev, pdata->clock_source, priv);
+	if (error) {
+		dev_err(&pdev->dev, "unable to setup clocks\n");
+		goto err1;
+	}
+
+	priv->base = devm_ioremap_nocache(&pdev->dev, res->start,
+			resource_size(res));
+	if (!priv->base) {
+		dev_err(&pdev->dev, "unable to ioremap\n");
+		goto err1;
+	}
+
+	priv->info = framebuffer_alloc(0, &pdev->dev);
+	if (!priv->info) {
+		dev_err(&pdev->dev, "unable to allocate fb_info\n");
+		goto err1;
+	}
+
+	info = priv->info;
+	info->fbops = &ren_vdc4_ops;
+	info->var.xres = info->var.xres_virtual = pdata->lcd_cfg.xres;
+	info->var.yres = info->var.yres_virtual = pdata->lcd_cfg.yres;
+	info->var.width = pdata->panel_width;
+	info->var.height = pdata->panel_height;
+	info->var.activate = FB_ACTIVATE_NOW;
+	info->pseudo_palette = priv->pseudo_palette;
+	error = ren_vdc4_set_bpp(&info->var, pdata->bpp);
+	if (error)
+		goto err1;
+
+	info->fix = ren_vdc4_fix;
+	info->fix.line_length = pdata->lcd_cfg.xres * (pdata->bpp / 8);
+	info->fix.smem_len = info->fix.line_length * pdata->lcd_cfg.yres;
+
+	buf = dma_alloc_coherent(&pdev->dev, info->fix.smem_len,
+				 &priv->dma_handle, GFP_KERNEL);
+	if (!buf) {
+		dev_err(&pdev->dev, "unable to allocate buffer\n");
+		goto err1;
+	}
+
+	info->flags = FBINFO_FLAG_DEFAULT;
+
+	error = fb_alloc_cmap(&info->cmap, PALETTE_NR, 0);
+	if (error < 0) {
+		dev_err(&pdev->dev, "unable to allocate cmap\n");
+		goto err1;
+	}
+
+	memset(buf, 0, info->fix.smem_len);
+	info->fix.smem_start = priv->dma_handle;
+	info->screen_base = buf;
+	info->device = &pdev->dev;
+	info->par = priv;
+
+	if (error)
+		goto err1;
+
+	error = ren_vdc4_start(priv, pdata->clock_source);
+	if (error) {
+		dev_err(&pdev->dev, "unable to start hardware\n");
+		goto err1;
+	}
+
+	info = priv->info;
+
+	error = register_framebuffer(info);
+	if (error < 0)
+		goto err1;
+
+	dev_info(info->dev,
+		"registered %s as %udx%ud %dbpp.\n",
+		pdev->name,
+		(int) pdata->lcd_cfg.xres,
+		(int) pdata->lcd_cfg.yres,
+		pdata->bpp);
+
+	return 0;
+
+err1:
+	ren_vdc4_remove(pdev);
+	return error;
+}
+
+static int ren_vdc4_remove(struct platform_device *pdev)
+{
+	struct ren_vdc4_priv *priv = platform_get_drvdata(pdev);
+	struct fb_info *info;
+
+	if (priv->info->dev)
+		unregister_framebuffer(priv->info);
+
+	ren_vdc4_stop(priv);
+
+	info = priv->info;
+
+	if (!info || !info->device) {
+		dev_err(&pdev->dev, "Failed to dealloc/release fb_info\n");
+	} else {
+		fb_dealloc_cmap(&info->cmap);
+		framebuffer_release(info);
+	}
+
+	return 0;
+}
+
+static struct platform_driver ren_vdc4_driver = {
+	.driver		= {
+		.name		= "ren_vdc4fb",
+		.owner		= THIS_MODULE,
+		.pm		= &ren_vdc4_dev_pm_ops,
+	},
+	.probe		= ren_vdc4_probe,
+	.remove		= ren_vdc4_remove,
+};
+
+static int __init ren_vdc4_init(void)
+{
+	return platform_driver_register(&ren_vdc4_driver);
+}
+
+static void __exit ren_vdc4_exit(void)
+{
+	platform_driver_unregister(&ren_vdc4_driver);
+}
+
+module_init(ren_vdc4_init);
+module_exit(ren_vdc4_exit);
+
+MODULE_DESCRIPTION("Renesas VDC4 Framebuffer driver");
+MODULE_AUTHOR("Phil Edworthy <phil.edworthy@renesas.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/video/ren_vdc4fb.h b/include/video/ren_vdc4fb.h
new file mode 100644
index 0000000..e91a515
--- /dev/null
+++ b/include/video/ren_vdc4fb.h
@@ -0,0 +1,19 @@ 
+#ifndef __REN_VDC4_H__
+#define __REN_VDC4_H__
+
+#include <linux/fb.h>
+
+enum { VDC4_EXTCLK = 1, VDC4_PERI_CLK };
+
+struct ren_vdc4_info {
+	int bpp;
+	int clock_source;
+	int clock_divider;
+	int hs_pulse_width;
+	int hs_start_pos;
+	struct fb_videomode lcd_cfg;
+	unsigned long panel_width;
+	unsigned long panel_height;
+};
+
+#endif