Message ID | 1361164358-5845-11-git-send-email-haojian.zhuang@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Mon, Feb 18, 2013 at 6:12 AM, Haojian Zhuang <haojian.zhuang@linaro.org> wrote: > Macro PXA_GPIO_TO_IRQ() & MMP_GPIO_TO_IRQ() is used in machine driver > without DT. Although we're allocating irq descriptions dynamically, > it may break machine drivers without DT. Append pdata->irq_base. > If irq_base is valid, allocate irq descriptions from irq_base. > > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> (...) > - chips[i].irq_base = irq_alloc_descs(-1, 0, gc->ngpio, 0); > + if (pdata->irq_base) > + irq_base = pdata->irq_base + gpio; > + else > + irq_base = -1; > + chips[i].irq_base = irq_alloc_descs(irq_base, 0, gc->ngpio, 0); > if (chips[i].irq_base < 0) > return -EINVAL; > if (!irq_domain_add_legacy(pdev->dev.of_node, gc->ngpio, In this case, when you want to pass a base IRQ, use irq_domain_add_simple(). The descriptor allocation will still be unnecessary. Yours, Linus Walleij
On 22 February 2013 03:12, Linus Walleij <linus.walleij@linaro.org> wrote: > On Mon, Feb 18, 2013 at 6:12 AM, Haojian Zhuang > <haojian.zhuang@linaro.org> wrote: > >> Macro PXA_GPIO_TO_IRQ() & MMP_GPIO_TO_IRQ() is used in machine driver >> without DT. Although we're allocating irq descriptions dynamically, >> it may break machine drivers without DT. Append pdata->irq_base. >> If irq_base is valid, allocate irq descriptions from irq_base. >> >> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> > (...) >> - chips[i].irq_base = irq_alloc_descs(-1, 0, gc->ngpio, 0); >> + if (pdata->irq_base) >> + irq_base = pdata->irq_base + gpio; >> + else >> + irq_base = -1; >> + chips[i].irq_base = irq_alloc_descs(irq_base, 0, gc->ngpio, 0); >> if (chips[i].irq_base < 0) >> return -EINVAL; >> if (!irq_domain_add_legacy(pdev->dev.of_node, gc->ngpio, > > In this case, when you want to pass a base IRQ, use > irq_domain_add_simple(). > > The descriptor allocation will still be unnecessary. > > Yours, > Linus Walleij Yes, thank you. Let me clean the irq usage after this patch series. Regards Haojian
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index a3e42dc..a160efc 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -113,6 +113,7 @@ static unsigned long common_pin_config[] __initdata = { static struct pxa_gpio_platform_data pxa168_gpio_pdata = { .nr_gpios = 128, + .irq_base = IRQ_GPIO_START, .ed_mask = true, }; diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index 1ea6502..5c8c93d 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -35,6 +35,7 @@ static unsigned long avengers_lite_pin_config_V16F[] __initdata = { static struct pxa_gpio_platform_data pxa168_gpio_pdata = { .nr_gpios = 128, + .irq_base = IRQ_GPIO_START, .ed_mask = true, }; diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index a32156f..ba9f3a1 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -107,6 +107,7 @@ static unsigned long brownstone_pin_config[] __initdata = { static struct pxa_gpio_platform_data mmp2_gpio_pdata = { .nr_gpios = 192, + .irq_base = IRQ_GPIO_START, .ed_mask = true, }; diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index 3f301b5..544c03a 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -80,6 +80,7 @@ static unsigned long flint_pin_config[] __initdata = { static struct pxa_gpio_platform_data mmp2_gpio_pdata = { .nr_gpios = 192, + .irq_base = IRQ_GPIO_START, .ed_mask = true, }; diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 019b178..e19eae8 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/gpio.h> #include <linux/gpio-pxa.h> +#include <linux/platform_device.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -130,6 +131,7 @@ static unsigned long gplugd_pin_config[] __initdata = { static struct pxa_gpio_platform_data pxa168_gpio_pdata = { .nr_gpios = 128, + .irq_base = IRQ_GPIO_START, .ed_mask = true, }; diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 6e8cf80..37a181a 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -63,6 +63,7 @@ static unsigned long tavorevb_pin_config[] __initdata = { static struct pxa_gpio_platform_data ttc_dkb_gpio_pdata = { .nr_gpios = 128, + .irq_base = IRQ_GPIO_START, .ed_mask = true, }; diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c index b5146bb..cace3b5 100644 --- a/arch/arm/mach-mmp/teton_bga.c +++ b/arch/arm/mach-mmp/teton_bga.c @@ -52,6 +52,7 @@ static unsigned long teton_bga_pin_config[] __initdata = { static struct pxa_gpio_platform_data pxa168_gpio_pdata = { .nr_gpios = 128, + .irq_base = IRQ_GPIO_START, .ed_mask = true, }; diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 387e3f8..a824285 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -78,6 +78,7 @@ static unsigned long ttc_dkb_pin_config[] __initdata = { static struct pxa_gpio_platform_data ttc_dkb_gpio_pdata = { .nr_gpios = 128, + .irq_base = IRQ_GPIO_START, .ed_mask = true, }; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index ff91660..2646654 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -346,6 +346,7 @@ static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = { #else .nr_gpios = 85, #endif + .irq_base = PXA_GPIO_IRQ_BASE, .gafr = true, .gpio_set_wake = gpio_set_wake, }; diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index e478ec8..9f44c4b 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -433,6 +433,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = { .gafr = true, .nr_gpios = 121, + .irq_base = PXA_GPIO_IRQ_BASE, .gpio_set_wake = gpio_set_wake, }; diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index f6bff16..7506879 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -438,6 +438,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) static struct pxa_gpio_platform_data pxa3xx_gpio_info __initdata = { .nr_gpios = 128, + .irq_base = PXA_GPIO_IRQ_BASE, }; static struct platform_device *devices[] __initdata = { diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index c9cc636..35cdb23 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -451,9 +451,10 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev) #endif static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end, - int (*set_wake)(unsigned int, unsigned int)) + struct pxa_gpio_platform_data *pdata) { int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; + int irq_base; struct pxa_gpio_chip *chips; struct device_node *next = NULL, *np = NULL; @@ -473,12 +474,17 @@ static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end, sprintf(chips[i].label, "gpio-%d", i); chips[i].regbase = gpio_reg_base + BANK_OFF(i); - chips[i].set_wake = set_wake; + if (pdata->gpio_set_wake) + chips[i].set_wake = pdata->gpio_set_wake; /* number of GPIOs on last bank may be less than 32 */ gc->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32; - chips[i].irq_base = irq_alloc_descs(-1, 0, gc->ngpio, 0); + if (pdata->irq_base) + irq_base = pdata->irq_base + gpio; + else + irq_base = -1; + chips[i].irq_base = irq_alloc_descs(irq_base, 0, gc->ngpio, 0); if (chips[i].irq_base < 0) return -EINVAL; if (!irq_domain_add_legacy(pdev->dev.of_node, gc->ngpio, @@ -557,8 +563,7 @@ static int pxa_gpio_probe(struct platform_device *pdev) /* Initialize GPIO chips */ pdata = dev_get_platdata(&pdev->dev); pxa_last_gpio = pdata->nr_gpios - 1; - ret = pxa_init_gpio_chip(pdev, pxa_last_gpio, - pdata ? pdata->gpio_set_wake : NULL); + ret = pxa_init_gpio_chip(pdev, pxa_last_gpio, pdata); if (ret < 0) return ret; diff --git a/include/linux/gpio-pxa.h b/include/linux/gpio-pxa.h index b357fdc..0d5e6db 100644 --- a/include/linux/gpio-pxa.h +++ b/include/linux/gpio-pxa.h @@ -20,6 +20,7 @@ struct pxa_gpio_platform_data { bool inverted; /* only valid for PXA26x */ bool gafr; /* only valid for PXA25x/PXA26x/PXA27x */ unsigned nr_gpios; + int irq_base; int (*gpio_set_wake)(unsigned int gpio, unsigned int on); };
Macro PXA_GPIO_TO_IRQ() & MMP_GPIO_TO_IRQ() is used in machine driver without DT. Although we're allocating irq descriptions dynamically, it may break machine drivers without DT. Append pdata->irq_base. If irq_base is valid, allocate irq descriptions from irq_base. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- arch/arm/mach-mmp/aspenite.c | 1 + arch/arm/mach-mmp/avengers_lite.c | 1 + arch/arm/mach-mmp/brownstone.c | 1 + arch/arm/mach-mmp/flint.c | 1 + arch/arm/mach-mmp/gplugd.c | 2 ++ arch/arm/mach-mmp/tavorevb.c | 1 + arch/arm/mach-mmp/teton_bga.c | 1 + arch/arm/mach-mmp/ttc_dkb.c | 1 + arch/arm/mach-pxa/pxa25x.c | 1 + arch/arm/mach-pxa/pxa27x.c | 1 + arch/arm/mach-pxa/pxa3xx.c | 1 + drivers/gpio/gpio-pxa.c | 15 ++++++++++----- include/linux/gpio-pxa.h | 1 + 13 files changed, 23 insertions(+), 5 deletions(-)