diff mbox

[20/20] OMAPDSS: Taal: remove rotate & mirror support

Message ID 1362743515-10152-21-git-send-email-tomi.valkeinen@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Tomi Valkeinen March 8, 2013, 11:51 a.m. UTC 
Taal panel driver has support to set rotation and mirroring. However,
these features cannot be used without causing tearing, and are never
used. The code is just extra bloat, so let's remove it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-taal.c |  170 +----------------------------
 1 file changed, 2 insertions(+), 168 deletions(-)

Comments

archit taneja March 11, 2013, 6:21 a.m. UTC | #1 
Hi,

On Friday 08 March 2013 05:21 PM, Tomi Valkeinen wrote:
> Taal panel driver has support to set rotation and mirroring. However,
> these features cannot be used without causing tearing, and are never
> used. The code is just extra bloat, so let's remove it.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

<snip>
>   static ssize_t taal_num_errors_show(struct device *dev,
> @@ -1025,10 +973,6 @@ static int taal_power_on(struct omap_dss_device *dssdev)
>   	if (r)
>   		goto err;
>
> -	r = taal_set_addr_mode(td, td->rotate, td->mirror);
> -	if (r)
> -		goto err;
> -

I'm curious if we need to set the address mode(to the default value) at 
least once. It may not be a requirement for Taal, but if that's the 
case, why did we have a set_addr_mode() call in taal_power_on() in the 
first place? Is it because we can prepare rotation and mirroring before 
we enable the panel?

Archit

--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tomi Valkeinen March 11, 2013, 6:51 a.m. UTC | #2 
On 2013-03-11 08:21, Archit Taneja wrote:
> Hi,
> 
> On Friday 08 March 2013 05:21 PM, Tomi Valkeinen wrote:
>> Taal panel driver has support to set rotation and mirroring. However,
>> these features cannot be used without causing tearing, and are never
>> used. The code is just extra bloat, so let's remove it.
>>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> 
> <snip>
>>   static ssize_t taal_num_errors_show(struct device *dev,
>> @@ -1025,10 +973,6 @@ static int taal_power_on(struct omap_dss_device
>> *dssdev)
>>       if (r)
>>           goto err;
>>
>> -    r = taal_set_addr_mode(td, td->rotate, td->mirror);
>> -    if (r)
>> -        goto err;
>> -
> 
> I'm curious if we need to set the address mode(to the default value) at
> least once. It may not be a requirement for Taal, but if that's the
> case, why did we have a set_addr_mode() call in taal_power_on() in the
> first place? Is it because we can prepare rotation and mirroring before
> we enable the panel?

The panel resets its registers at HW reset, so in case we have changed
the rotation or mirroring, we need to set the addr more at power_on to
keep the user's rotation and mirroring after resuming from blanking. But
now that the rotation or mirroring is never changed, the default value
is always fine.

 Tomi
diff mbox

Patch

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 038a815..bc4c95e 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -76,8 +76,6 @@  struct taal_data {
 
 	/* runtime variables */
 	bool enabled;
-	u8 rotate;
-	bool mirror;
 
 	bool te_enabled;
 
@@ -202,49 +200,6 @@  static int taal_get_id(struct taal_data *td, u8 *id1, u8 *id2, u8 *id3)
 	return 0;
 }
 
-static int taal_set_addr_mode(struct taal_data *td, u8 rotate, bool mirror)
-{
-	int r;
-	u8 mode;
-	int b5, b6, b7;
-
-	r = taal_dcs_read_1(td, MIPI_DCS_GET_ADDRESS_MODE, &mode);
-	if (r)
-		return r;
-
-	switch (rotate) {
-	default:
-	case 0:
-		b7 = 0;
-		b6 = 0;
-		b5 = 0;
-		break;
-	case 1:
-		b7 = 0;
-		b6 = 1;
-		b5 = 1;
-		break;
-	case 2:
-		b7 = 1;
-		b6 = 1;
-		b5 = 0;
-		break;
-	case 3:
-		b7 = 1;
-		b6 = 0;
-		b5 = 1;
-		break;
-	}
-
-	if (mirror)
-		b6 = !b6;
-
-	mode &= ~((1<<7) | (1<<6) | (1<<5));
-	mode |= (b7 << 7) | (b6 << 6) | (b5 << 5);
-
-	return taal_dcs_write_1(td, MIPI_DCS_SET_ADDRESS_MODE, mode);
-}
-
 static int taal_set_update_window(struct taal_data *td,
 		u16 x, u16 y, u16 w, u16 h)
 {
@@ -455,15 +410,8 @@  static const struct backlight_ops taal_bl_ops = {
 static void taal_get_resolution(struct omap_dss_device *dssdev,
 		u16 *xres, u16 *yres)
 {
-	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-
-	if (td->rotate == 0 || td->rotate == 2) {
-		*xres = dssdev->panel.timings.x_res;
-		*yres = dssdev->panel.timings.y_res;
-	} else {
-		*yres = dssdev->panel.timings.x_res;
-		*xres = dssdev->panel.timings.y_res;
-	}
+	*xres = dssdev->panel.timings.x_res;
+	*yres = dssdev->panel.timings.y_res;
 }
 
 static ssize_t taal_num_errors_show(struct device *dev,
@@ -1025,10 +973,6 @@  static int taal_power_on(struct omap_dss_device *dssdev)
 	if (r)
 		goto err;
 
-	r = taal_set_addr_mode(td, td->rotate, td->mirror);
-	if (r)
-		goto err;
-
 	if (!td->cabc_broken) {
 		r = taal_dcs_write_1(td, DCS_WRITE_CABC, td->cabc_mode);
 		if (r)
@@ -1340,112 +1284,6 @@  static int taal_get_te(struct omap_dss_device *dssdev)
 	return r;
 }
 
-static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
-{
-	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	u16 dw, dh;
-	int r;
-
-	dev_dbg(&dssdev->dev, "rotate %d\n", rotate);
-
-	mutex_lock(&td->lock);
-
-	if (td->rotate == rotate)
-		goto end;
-
-	dsi_bus_lock(dssdev);
-
-	if (td->enabled) {
-		r = taal_wake_up(dssdev);
-		if (r)
-			goto err;
-
-		r = taal_set_addr_mode(td, rotate, td->mirror);
-		if (r)
-			goto err;
-	}
-
-	if (rotate == 0 || rotate == 2) {
-		dw = dssdev->panel.timings.x_res;
-		dh = dssdev->panel.timings.y_res;
-	} else {
-		dw = dssdev->panel.timings.y_res;
-		dh = dssdev->panel.timings.x_res;
-	}
-
-	omapdss_dsi_set_size(dssdev, dw, dh);
-
-	td->rotate = rotate;
-
-	dsi_bus_unlock(dssdev);
-end:
-	mutex_unlock(&td->lock);
-	return 0;
-err:
-	dsi_bus_unlock(dssdev);
-	mutex_unlock(&td->lock);
-	return r;
-}
-
-static u8 taal_get_rotate(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	int r;
-
-	mutex_lock(&td->lock);
-	r = td->rotate;
-	mutex_unlock(&td->lock);
-
-	return r;
-}
-
-static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
-{
-	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	int r;
-
-	dev_dbg(&dssdev->dev, "mirror %d\n", enable);
-
-	mutex_lock(&td->lock);
-
-	if (td->mirror == enable)
-		goto end;
-
-	dsi_bus_lock(dssdev);
-	if (td->enabled) {
-		r = taal_wake_up(dssdev);
-		if (r)
-			goto err;
-
-		r = taal_set_addr_mode(td, td->rotate, enable);
-		if (r)
-			goto err;
-	}
-
-	td->mirror = enable;
-
-	dsi_bus_unlock(dssdev);
-end:
-	mutex_unlock(&td->lock);
-	return 0;
-err:
-	dsi_bus_unlock(dssdev);
-	mutex_unlock(&td->lock);
-	return r;
-}
-
-static bool taal_get_mirror(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	int r;
-
-	mutex_lock(&td->lock);
-	r = td->mirror;
-	mutex_unlock(&td->lock);
-
-	return r;
-}
-
 static int taal_run_test(struct omap_dss_device *dssdev, int test_num)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
@@ -1679,10 +1517,6 @@  static struct omap_dss_driver taal_driver = {
 	.enable_te	= taal_enable_te,
 	.get_te		= taal_get_te,
 
-	.set_rotate	= taal_rotate,
-	.get_rotate	= taal_get_rotate,
-	.set_mirror	= taal_mirror,
-	.get_mirror	= taal_get_mirror,
 	.run_test	= taal_run_test,
 	.memory_read	= taal_memory_read,