new file mode 100644
@@ -0,0 +1,73 @@
+AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power
+supplies, a battery charger and an RTC. So far only bindings for the two stepup
+DCDC converters are defined. Other DCDC and LDO supplies are configured, using
+standard regulator properties, they must belong to a sub-node, called
+"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter
+configuration should be placed in a subnode, called "backlight."
+
+Compulsory properties:
+- compatible : must be "ams,as3711"
+- reg : specifies the I2C address
+
+To use the SU1 converter as a backlight source the following two properties must
+be provided:
+- su1-dev : framebuffer phandle
+- su1-max-uA : maximum current
+
+To use the SU2 converter as a backlight source the following two properties must
+be provided:
+- su2-dev : framebuffer phandle
+- su1-max-uA : maximum current
+
+Additionally one of these properties must be provided to select the type of
+feedback used:
+- su2-feedback-voltage : voltage feedback is used
+- su2-feedback-curr1 : CURR1 input used for current feedback
+- su2-feedback-curr2 : CURR2 input used for current feedback
+- su2-feedback-curr3 : CURR3 input used for current feedback
+- su2-feedback-curr-auto: automatic current feedback selection
+
+and one of these to select the over-voltage protection pin
+- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection
+- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection
+- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection
+- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection
+
+If "su2-feedback-curr-auto" is selected, one or more of the following properties
+have to be specified:
+- su2-auto-curr1 : use CURR1 input for current feedback
+- su2-auto-curr2 : use CURR2 input for current feedback
+- su2-auto-curr3 : use CURR3 input for current feedback
+
+Example:
+
+as3711@40 {
+ compatible = "ams,as3711";
+ reg = <0x40>;
+
+ regulators {
+ sd4 {
+ regulator-name = "1.215V";
+ regulator-min-microvolt = <1215000>;
+ regulator-max-microvolt = <1235000>;
+ };
+ ldo2 {
+ regulator-name = "2.8V CPU";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+
+ backlight {
+ compatible = "ams,as3711-bl";
+ su2-dev = <&lcdc>;
+ su2-max-uA = <36000>;
+ su2-feedback-curr-auto;
+ su2-fbprot-gpio4;
+ su2-auto-curr1;
+ su2-auto-curr2;
+ su2-auto-curr3;
+ };
+};
@@ -112,16 +112,34 @@ static const struct regmap_config as3711_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
+#ifdef CONFIG_OF
+static struct of_device_id as3711_of_match[] = {
+ {.compatible = "ams,as3711",},
+ {}
+};
+MODULE_DEVICE_TABLE(of, as3711_of_match);
+#endif
+
static int as3711_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct as3711 *as3711;
- struct as3711_platform_data *pdata = client->dev.platform_data;
+ struct as3711_platform_data *pdata;
unsigned int id1, id2;
int ret;
- if (!pdata)
- dev_dbg(&client->dev, "Platform data not found\n");
+ if (!client->dev.of_node) {
+ pdata = client->dev.platform_data;
+ if (!pdata)
+ dev_dbg(&client->dev, "Platform data not found\n");
+ } else {
+ pdata = devm_kzalloc(&client->dev,
+ sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&client->dev, "Failed to allocate pdata\n");
+ return -ENOMEM;
+ }
+ }
as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL);
if (!as3711) {
@@ -193,7 +211,8 @@ static struct i2c_driver as3711_i2c_driver = {
.driver = {
.name = "as3711",
.owner = THIS_MODULE,
- },
+ .of_match_table = of_match_ptr(as3711_of_match),
+ },
.probe = as3711_i2c_probe,
.remove = as3711_i2c_remove,
.id_table = as3711_i2c_id,
@@ -13,9 +13,11 @@
#include <linux/init.h>
#include <linux/mfd/as3711.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>
struct as3711_regulator_info {
@@ -276,6 +278,57 @@ static struct as3711_regulator_info as3711_reg_info[] = {
#define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_info)
+static const char *as3711_regulator_of_names[AS3711_REGULATOR_NUM] = {
+ [AS3711_REGULATOR_SD_1] = "sd1",
+ [AS3711_REGULATOR_SD_2] = "sd2",
+ [AS3711_REGULATOR_SD_3] = "sd3",
+ [AS3711_REGULATOR_SD_4] = "sd4",
+ [AS3711_REGULATOR_LDO_1] = "ldo1",
+ [AS3711_REGULATOR_LDO_2] = "ldo2",
+ [AS3711_REGULATOR_LDO_3] = "ldo3",
+ [AS3711_REGULATOR_LDO_4] = "ldo4",
+ [AS3711_REGULATOR_LDO_5] = "ldo5",
+ [AS3711_REGULATOR_LDO_6] = "ldo6",
+ [AS3711_REGULATOR_LDO_7] = "ldo7",
+ [AS3711_REGULATOR_LDO_8] = "ldo8",
+};
+
+static int as3711_regulator_parse_dt(struct device *dev)
+{
+ struct as3711_regulator_pdata *pdata = dev_get_platdata(dev);
+ struct device_node *regulators =
+ of_find_node_by_name(dev->parent->of_node, "regulators");
+ struct of_regulator_match *matches, *match;
+ const int count = AS3711_REGULATOR_NUM;
+ int ret, i;
+
+ if (!regulators) {
+ dev_err(dev, "regulator node not found\n");
+ return -ENODEV;
+ }
+
+ matches = devm_kzalloc(dev, sizeof(*matches) * count, GFP_KERNEL);
+ if (!matches)
+ return -ENOMEM;
+
+ for (i = 0, match = matches; i < count; i++, match++) {
+ match->name = as3711_regulator_of_names[i];
+ match->driver_data = as3711_reg_info + i;
+ }
+
+ ret = of_regulator_match(dev->parent, regulators, matches, count);
+ if (ret < 0) {
+ dev_err(dev, "Error parsing regulator init data: %d\n", ret);
+ return ret;
+ }
+
+ for (i = 0, match = matches; i < count; i++, match++)
+ if (match->of_node)
+ pdata->init_data[i] = match->init_data;
+
+ return 0;
+}
+
static int as3711_regulator_probe(struct platform_device *pdev)
{
struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev);
@@ -289,8 +342,18 @@ static int as3711_regulator_probe(struct platform_device *pdev)
int ret;
int id;
- if (!pdata)
- dev_dbg(&pdev->dev, "No platform data...\n");
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data...\n");
+ return -ENODEV;
+ }
+
+ if (pdev->dev.parent->of_node) {
+ ret = as3711_regulator_parse_dt(&pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "DT parsing failed: %d\n", ret);
+ return ret;
+ }
+ }
regs = devm_kzalloc(&pdev->dev, AS3711_REGULATOR_NUM *
sizeof(struct as3711_regulator), GFP_KERNEL);
@@ -300,7 +363,7 @@ static int as3711_regulator_probe(struct platform_device *pdev)
}
for (id = 0, ri = as3711_reg_info; id < AS3711_REGULATOR_NUM; ++id, ri++) {
- reg_data = pdata ? pdata->init_data[id] : NULL;
+ reg_data = pdata->init_data[id];
/* No need to register if there is no regulator data */
if (!reg_data)
@@ -257,6 +257,109 @@ static int as3711_bl_register(struct platform_device *pdev,
return 0;
}
+static int as3711_backlight_parse_dt(struct device *dev)
+{
+ struct as3711_bl_pdata *pdata = dev_get_platdata(dev);
+ struct device_node *bl =
+ of_find_node_by_name(dev->parent->of_node, "backlight"), *fb;
+ int ret;
+
+ if (!bl) {
+ dev_dbg(dev, "backlight node not found\n");
+ return -ENODEV;
+ }
+
+ fb = of_parse_phandle(bl, "su1-dev", 0);
+ if (fb) {
+ pdata->su1_fb = fb->full_name;
+
+ ret = of_property_read_u32(bl, "su1-max-uA", &pdata->su1_max_uA);
+ if (pdata->su1_max_uA <= 0)
+ ret = -EINVAL;
+ if (ret < 0)
+ return ret;
+ }
+
+ fb = of_parse_phandle(bl, "su2-dev", 0);
+ if (fb) {
+ int count = 0;
+
+ pdata->su2_fb = fb->full_name;
+
+ ret = of_property_read_u32(bl, "su2-max-uA", &pdata->su2_max_uA);
+ if (pdata->su2_max_uA <= 0)
+ ret = -EINVAL;
+ if (ret < 0)
+ return ret;
+
+ if (of_find_property(bl, "su2-feedback-voltage", NULL)) {
+ pdata->su2_feedback = AS3711_SU2_VOLTAGE;
+ count++;
+ }
+ if (of_find_property(bl, "su2-feedback-curr1", NULL)) {
+ pdata->su2_feedback = AS3711_SU2_CURR1;
+ count++;
+ }
+ if (of_find_property(bl, "su2-feedback-curr2", NULL)) {
+ pdata->su2_feedback = AS3711_SU2_CURR2;
+ count++;
+ }
+ if (of_find_property(bl, "su2-feedback-curr3", NULL)) {
+ pdata->su2_feedback = AS3711_SU2_CURR3;
+ count++;
+ }
+ if (of_find_property(bl, "su2-feedback-curr-auto", NULL)) {
+ pdata->su2_feedback = AS3711_SU2_CURR_AUTO;
+ count++;
+ }
+ if (count != 1)
+ return -EINVAL;
+
+ count = 0;
+ if (of_find_property(bl, "su2-fbprot-lx-sd4", NULL)) {
+ pdata->su2_fbprot = AS3711_SU2_LX_SD4;
+ count++;
+ }
+ if (of_find_property(bl, "su2-fbprot-gpio2", NULL)) {
+ pdata->su2_fbprot = AS3711_SU2_GPIO2;
+ count++;
+ }
+ if (of_find_property(bl, "su2-fbprot-gpio3", NULL)) {
+ pdata->su2_fbprot = AS3711_SU2_GPIO3;
+ count++;
+ }
+ if (of_find_property(bl, "su2-fbprot-gpio4", NULL)) {
+ pdata->su2_fbprot = AS3711_SU2_GPIO4;
+ count++;
+ }
+ if (count != 1)
+ return -EINVAL;
+
+ count = 0;
+ if (of_find_property(bl, "su2-auto-curr1", NULL)) {
+ pdata->su2_auto_curr1 = true;
+ count++;
+ }
+ if (of_find_property(bl, "su2-auto-curr2", NULL)) {
+ pdata->su2_auto_curr2 = true;
+ count++;
+ }
+ if (of_find_property(bl, "su2-auto-curr3", NULL)) {
+ pdata->su2_auto_curr3 = true;
+ count++;
+ }
+
+ /*
+ * At least one su2-auto-curr* must be specified iff
+ * AS3711_SU2_CURR_AUTO is used
+ */
+ if (!count ^ (pdata->su2_feedback != AS3711_SU2_CURR_AUTO))
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int as3711_backlight_probe(struct platform_device *pdev)
{
struct as3711_bl_pdata *pdata = dev_get_platdata(&pdev->dev);
@@ -266,11 +369,24 @@ static int as3711_backlight_probe(struct platform_device *pdev)
unsigned int max_brightness;
int ret;
- if (!pdata || (!pdata->su1_fb && !pdata->su2_fb)) {
+ if (!pdata) {
dev_err(&pdev->dev, "No platform data, exiting...\n");
return -ENODEV;
}
+ if (pdev->dev.parent->of_node) {
+ ret = as3711_backlight_parse_dt(&pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "DT parsing failed: %d\n", ret);
+ return ret;
+ }
+ }
+
+ if (!pdata->su1_fb && !pdata->su2_fb) {
+ dev_err(&pdev->dev, "No framebuffer specified\n");
+ return -EINVAL;
+ }
+
/*
* Due to possible hardware damage I chose to block all modes,
* unsupported on my hardware. Anyone, wishing to use any of those modes
Add device-tree bindings to the AS3711 regulator and backlight drivers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- v2: 1. remove of_device_is_available() - it breaks compilation with CONFIG_OF disabled and is redundant anyway - I2C devices are only registered for available devoces 2. add parenthesis to eliminate a compiler warning Documentation/devicetree/bindings/mfd/as3711.txt | 73 +++++++++++++ drivers/mfd/as3711.c | 27 ++++- drivers/regulator/as3711-regulator.c | 69 ++++++++++++- drivers/video/backlight/as3711_bl.c | 118 +++++++++++++++++++++- 4 files changed, 279 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/as3711.txt