| Message ID | 1378320.ernsY1JWPv@vostro.rjw.lan (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
[+cc Zheng, who added this with 71a83bd727] On Sat, Mar 30, 2013 at 4:38 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > The runtime PM of PCIe ports turns out to be quite fragile, as in > some cases things work while in some other cases they don't and we > don't seem to have a good way to determine whether or not they are > going to work in advance. Do you have any references to problems encountered when enabling runtime PM for PCIe ports? That information will be useful to anybody who wants to take another crack at getting this working. > For this reason, avoid enabling runtime PM for PCIe ports by > keeping their runtime PM reference counters always above 0 for the > time being. > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > --- > > This version also removes the no longer necessary (and empty anyway) > port_runtime_pm_black_list[] table. > > Thanks, > Rafael > > --- > drivers/pci/pcie/portdrv_pci.c | 13 ------------- > 1 file changed, 13 deletions(-) > > Index: linux-pm/drivers/pci/pcie/portdrv_pci.c > =================================================================== > --- linux-pm.orig/drivers/pci/pcie/portdrv_pci.c > +++ linux-pm/drivers/pci/pcie/portdrv_pci.c > @@ -185,14 +185,6 @@ static const struct dev_pm_ops pcie_port > #endif /* !PM */ > > /* > - * PCIe port runtime suspend is broken for some chipsets, so use a > - * black list to disable runtime PM for these chipsets. > - */ > -static const struct pci_device_id port_runtime_pm_black_list[] = { > - { /* end: all zeroes */ } > -}; > - > -/* > * pcie_portdrv_probe - Probe PCI-Express port devices > * @dev: PCI-Express port device being probed > * > @@ -225,16 +217,11 @@ static int pcie_portdrv_probe(struct pci > * it by default. > */ > dev->d3cold_allowed = false; > - if (!pci_match_id(port_runtime_pm_black_list, dev)) > - pm_runtime_put_noidle(&dev->dev); > - > return 0; > } > > static void pcie_portdrv_remove(struct pci_dev *dev) > { > - if (!pci_match_id(port_runtime_pm_black_list, dev)) > - pm_runtime_get_noresume(&dev->dev); > pcie_port_device_remove(dev); > pci_disable_device(dev); > } > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Monday, April 01, 2013 11:34:46 AM Bjorn Helgaas wrote: > [+cc Zheng, who added this with 71a83bd727] > > On Sat, Mar 30, 2013 at 4:38 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > > > The runtime PM of PCIe ports turns out to be quite fragile, as in > > some cases things work while in some other cases they don't and we > > don't seem to have a good way to determine whether or not they are > > going to work in advance. > > Do you have any references to problems encountered when enabling > runtime PM for PCIe ports? That information will be useful to anybody > who wants to take another crack at getting this working. Well, bug 53811 is one example and problems recently reported by Martin are another. Do you want me to dig deeper? Rafael > > For this reason, avoid enabling runtime PM for PCIe ports by > > keeping their runtime PM reference counters always above 0 for the > > time being. > > > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > --- > > > > This version also removes the no longer necessary (and empty anyway) > > port_runtime_pm_black_list[] table. > > > > Thanks, > > Rafael > > > > --- > > drivers/pci/pcie/portdrv_pci.c | 13 ------------- > > 1 file changed, 13 deletions(-) > > > > Index: linux-pm/drivers/pci/pcie/portdrv_pci.c > > =================================================================== > > --- linux-pm.orig/drivers/pci/pcie/portdrv_pci.c > > +++ linux-pm/drivers/pci/pcie/portdrv_pci.c > > @@ -185,14 +185,6 @@ static const struct dev_pm_ops pcie_port > > #endif /* !PM */ > > > > /* > > - * PCIe port runtime suspend is broken for some chipsets, so use a > > - * black list to disable runtime PM for these chipsets. > > - */ > > -static const struct pci_device_id port_runtime_pm_black_list[] = { > > - { /* end: all zeroes */ } > > -}; > > - > > -/* > > * pcie_portdrv_probe - Probe PCI-Express port devices > > * @dev: PCI-Express port device being probed > > * > > @@ -225,16 +217,11 @@ static int pcie_portdrv_probe(struct pci > > * it by default. > > */ > > dev->d3cold_allowed = false; > > - if (!pci_match_id(port_runtime_pm_black_list, dev)) > > - pm_runtime_put_noidle(&dev->dev); > > - > > return 0; > > } > > > > static void pcie_portdrv_remove(struct pci_dev *dev) > > { > > - if (!pci_match_id(port_runtime_pm_black_list, dev)) > > - pm_runtime_get_noresume(&dev->dev); > > pcie_port_device_remove(dev); > > pci_disable_device(dev); > > } > >
On Mon, Apr 1, 2013 at 2:51 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > On Monday, April 01, 2013 11:34:46 AM Bjorn Helgaas wrote: >> [+cc Zheng, who added this with 71a83bd727] >> >> On Sat, Mar 30, 2013 at 4:38 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: >> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> >> > >> > The runtime PM of PCIe ports turns out to be quite fragile, as in >> > some cases things work while in some other cases they don't and we >> > don't seem to have a good way to determine whether or not they are >> > going to work in advance. >> >> Do you have any references to problems encountered when enabling >> runtime PM for PCIe ports? That information will be useful to anybody >> who wants to take another crack at getting this working. > > Well, bug 53811 is one example and problems recently reported by > Martin are another. Do you want me to dig deeper? OK, I got this one: https://bugzilla.kernel.org/show_bug.cgi?id=53811 Martin has reported a lot of problems lately, and I don't know which are related to runtime PM for PCIe ports. I was hoping for a couple URLs to put in the changelog so that when somebody gets the itch to make this work, they have some useful info to start from. If you point me at a specific message, I'll dig up an archive URL for it. Otherwise, I'm afraid we'll just oscillate between "enable PM, find bug, disable PM, enable PM, find same bug, disable PM, etc..." Bjorn >> > For this reason, avoid enabling runtime PM for PCIe ports by >> > keeping their runtime PM reference counters always above 0 for the >> > time being. >> > >> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> >> > --- >> > >> > This version also removes the no longer necessary (and empty anyway) >> > port_runtime_pm_black_list[] table. >> > >> > Thanks, >> > Rafael >> > >> > --- >> > drivers/pci/pcie/portdrv_pci.c | 13 ------------- >> > 1 file changed, 13 deletions(-) >> > >> > Index: linux-pm/drivers/pci/pcie/portdrv_pci.c >> > =================================================================== >> > --- linux-pm.orig/drivers/pci/pcie/portdrv_pci.c >> > +++ linux-pm/drivers/pci/pcie/portdrv_pci.c >> > @@ -185,14 +185,6 @@ static const struct dev_pm_ops pcie_port >> > #endif /* !PM */ >> > >> > /* >> > - * PCIe port runtime suspend is broken for some chipsets, so use a >> > - * black list to disable runtime PM for these chipsets. >> > - */ >> > -static const struct pci_device_id port_runtime_pm_black_list[] = { >> > - { /* end: all zeroes */ } >> > -}; >> > - >> > -/* >> > * pcie_portdrv_probe - Probe PCI-Express port devices >> > * @dev: PCI-Express port device being probed >> > * >> > @@ -225,16 +217,11 @@ static int pcie_portdrv_probe(struct pci >> > * it by default. >> > */ >> > dev->d3cold_allowed = false; >> > - if (!pci_match_id(port_runtime_pm_black_list, dev)) >> > - pm_runtime_put_noidle(&dev->dev); >> > - >> > return 0; >> > } >> > >> > static void pcie_portdrv_remove(struct pci_dev *dev) >> > { >> > - if (!pci_match_id(port_runtime_pm_black_list, dev)) >> > - pm_runtime_get_noresume(&dev->dev); >> > pcie_port_device_remove(dev); >> > pci_disable_device(dev); >> > } >> > > -- > I speak only for myself. > Rafael J. Wysocki, Intel Open Source Technology Center. -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Monday, April 01, 2013 02:53:12 PM Bjorn Helgaas wrote: > On Mon, Apr 1, 2013 at 2:51 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > > On Monday, April 01, 2013 11:34:46 AM Bjorn Helgaas wrote: > >> [+cc Zheng, who added this with 71a83bd727] > >> > >> On Sat, Mar 30, 2013 at 4:38 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > >> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > >> > > >> > The runtime PM of PCIe ports turns out to be quite fragile, as in > >> > some cases things work while in some other cases they don't and we > >> > don't seem to have a good way to determine whether or not they are > >> > going to work in advance. > >> > >> Do you have any references to problems encountered when enabling > >> runtime PM for PCIe ports? That information will be useful to anybody > >> who wants to take another crack at getting this working. > > > > Well, bug 53811 is one example and problems recently reported by > > Martin are another. Do you want me to dig deeper? > > OK, I got this one: > > https://bugzilla.kernel.org/show_bug.cgi?id=53811 > > Martin has reported a lot of problems lately, and I don't know which > are related to runtime PM for PCIe ports. I was hoping for a couple > URLs to put in the changelog so that when somebody gets the itch to > make this work, they have some useful info to start from. If you > point me at a specific message, I'll dig up an archive URL for it. This is the message in which Martin confirmed that the previous version of the $subject patch made insert/removal of devices into xHCI ports on his system work again. > Otherwise, I'm afraid we'll just oscillate between "enable PM, find > bug, disable PM, enable PM, find same bug, disable PM, etc..." That's a valid concern, but I think we have an idea about what kind of problems the runtime PM of PCIe ports may cause to happen (generally, PME and hotplug notifications may not work as expected). Thanks, Rafael > >> > For this reason, avoid enabling runtime PM for PCIe ports by > >> > keeping their runtime PM reference counters always above 0 for the > >> > time being. > >> > > >> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > >> > --- > >> > > >> > This version also removes the no longer necessary (and empty anyway) > >> > port_runtime_pm_black_list[] table. > >> > > >> > Thanks, > >> > Rafael > >> > > >> > --- > >> > drivers/pci/pcie/portdrv_pci.c | 13 ------------- > >> > 1 file changed, 13 deletions(-) > >> > > >> > Index: linux-pm/drivers/pci/pcie/portdrv_pci.c > >> > =================================================================== > >> > --- linux-pm.orig/drivers/pci/pcie/portdrv_pci.c > >> > +++ linux-pm/drivers/pci/pcie/portdrv_pci.c > >> > @@ -185,14 +185,6 @@ static const struct dev_pm_ops pcie_port > >> > #endif /* !PM */ > >> > > >> > /* > >> > - * PCIe port runtime suspend is broken for some chipsets, so use a > >> > - * black list to disable runtime PM for these chipsets. > >> > - */ > >> > -static const struct pci_device_id port_runtime_pm_black_list[] = { > >> > - { /* end: all zeroes */ } > >> > -}; > >> > - > >> > -/* > >> > * pcie_portdrv_probe - Probe PCI-Express port devices > >> > * @dev: PCI-Express port device being probed > >> > * > >> > @@ -225,16 +217,11 @@ static int pcie_portdrv_probe(struct pci > >> > * it by default. > >> > */ > >> > dev->d3cold_allowed = false; > >> > - if (!pci_match_id(port_runtime_pm_black_list, dev)) > >> > - pm_runtime_put_noidle(&dev->dev); > >> > - > >> > return 0; > >> > } > >> > > >> > static void pcie_portdrv_remove(struct pci_dev *dev) > >> > { > >> > - if (!pci_match_id(port_runtime_pm_black_list, dev)) > >> > - pm_runtime_get_noresume(&dev->dev); > >> > pcie_port_device_remove(dev); > >> > pci_disable_device(dev); > >> > } > >> > > > -- > > I speak only for myself. > > Rafael J. Wysocki, Intel Open Source Technology Center.
Bjorn Helgaas wrote: > On Mon, Apr 1, 2013 at 2:51 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: >> On Monday, April 01, 2013 11:34:46 AM Bjorn Helgaas wrote: >>> [+cc Zheng, who added this with 71a83bd727] >>> >>> On Sat, Mar 30, 2013 at 4:38 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: >>>> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> >>>> >>>> The runtime PM of PCIe ports turns out to be quite fragile, as in >>>> some cases things work while in some other cases they don't and we >>>> don't seem to have a good way to determine whether or not they are >>>> going to work in advance. >>> >>> Do you have any references to problems encountered when enabling >>> runtime PM for PCIe ports? That information will be useful to anybody >>> who wants to take another crack at getting this working. >> >> Well, bug 53811 is one example and problems recently reported by >> Martin are another. Do you want me to dig deeper? > > OK, I got this one: > > https://bugzilla.kernel.org/show_bug.cgi?id=53811 > > Martin has reported a lot of problems lately, and I don't know which > are related to runtime PM for PCIe ports. I was hoping for a couple > URLs to put in the changelog so that when somebody gets the itch to > make this work, they have some useful info to start from. If you > point me at a specific message, I'll dig up an archive URL for it. In the thread Re: 3.8.2: xhci port is dead until pcieport PME# goes to disabled http://marc.info/?t=136328222600002&r=1&w=2 I reported that if an upstream express root port 1c.4 of the xHCI controller at 0b:00 is suspended the USB3 socket on the laptop appears dead. Initially I found that 'lsusb -v' rescues the dead socket and is accompanied by these in logs: [ 1445.597641] pcieport 0000:00:1c.4: PME# disabled [ 1445.617667] xhci_hcd 0000:0b:00.0: PME# disabled Ying Huang then realized elsewhere I am running laptop-mode-tools although in their config file I set that they should NOT be run when on AC power. Looks they do enable 'auto' power mode as seen in /sys/bus/pci/devices/*/power/control files already upon bootup. BTW, even worse, if I do /etc/init.d/laptop-mode-tools stop they restore to some initial values. :(( So, if I meanwhile forced 'on' for some device they will return me back to 'auto' and the device will immediately do suspend. ;-) Provided I uninstalled the laptop-mode-tools and made sure all control files say 'on' (and hence runtime_status files say 'active') then my problem is with a dead xHCI port 'obeyed'. Myself it weird that suspend of the port happens only upon USB device unplug. The port does not suspend by itself if unused. What is not clear to me how kernel is going to handle laptop-mode-tools which enabled powersaving on the 1c.4. In my naive, user view kernel does not realize and *check* that no user tool or a desperate user tried to suspend an upstream port while there is something bound to it and it does not apply a check for cascaded devices (1c.4 > 0b:00 and 1c.7 -> 11:00 in my case). I am writing this without a reference but modprobe of a driver can overcome suspended root port. I am in this particular case meaning my 1c.7 port and its downstream 11:00 express card device. From the top of my head I am not sure if modprobe overcame both 1c.7 and 11:00 being initially suspended. I could dig it out from the Re: 3.9-rc1: pciehp and eSATA card SiI 3132, no XHCI http://marc.info/?t=136305008800001&r=1&w=2 thread if you want. Or it might be easier for you to test it yourself. So, for me the issue is not fixed but if you decide to disable runtime power saving for devices under pcieport I don't mind. Their mishandling definitely causes my acpiphp hotplug issues under 3.7-3.8 kernels (3.9-rc not tested) whereas these PM issues do not answer why pciehp is broken on 3.7-3.9-rc1. Anyway, this patch maybe only good because I would like to use the laptop-mode-tools and they for sure will put one of the devices into 'auto' and it will likely fall into suspend. Martin > > Otherwise, I'm afraid we'll just oscillate between "enable PM, find > bug, disable PM, enable PM, find same bug, disable PM, etc..." > > Bjorn > >>>> For this reason, avoid enabling runtime PM for PCIe ports by >>>> keeping their runtime PM reference counters always above 0 for the >>>> time being. >>>> >>>> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> >>>> --- >>>> >>>> This version also removes the no longer necessary (and empty anyway) >>>> port_runtime_pm_black_list[] table. >>>> >>>> Thanks, >>>> Rafael >>>> >>>> --- >>>> drivers/pci/pcie/portdrv_pci.c | 13 ------------- >>>> 1 file changed, 13 deletions(-) >>>> >>>> Index: linux-pm/drivers/pci/pcie/portdrv_pci.c >>>> =================================================================== >>>> --- linux-pm.orig/drivers/pci/pcie/portdrv_pci.c >>>> +++ linux-pm/drivers/pci/pcie/portdrv_pci.c >>>> @@ -185,14 +185,6 @@ static const struct dev_pm_ops pcie_port >>>> #endif /* !PM */ >>>> >>>> /* >>>> - * PCIe port runtime suspend is broken for some chipsets, so use a >>>> - * black list to disable runtime PM for these chipsets. >>>> - */ >>>> -static const struct pci_device_id port_runtime_pm_black_list[] = { >>>> - { /* end: all zeroes */ } >>>> -}; >>>> - >>>> -/* >>>> * pcie_portdrv_probe - Probe PCI-Express port devices >>>> * @dev: PCI-Express port device being probed >>>> * >>>> @@ -225,16 +217,11 @@ static int pcie_portdrv_probe(struct pci >>>> * it by default. >>>> */ >>>> dev->d3cold_allowed = false; >>>> - if (!pci_match_id(port_runtime_pm_black_list, dev)) >>>> - pm_runtime_put_noidle(&dev->dev); >>>> - >>>> return 0; >>>> } >>>> >>>> static void pcie_portdrv_remove(struct pci_dev *dev) >>>> { >>>> - if (!pci_match_id(port_runtime_pm_black_list, dev)) >>>> - pm_runtime_get_noresume(&dev->dev); >>>> pcie_port_device_remove(dev); >>>> pci_disable_device(dev); >>>> } >>>> >> -- >> I speak only for myself. >> Rafael J. Wysocki, Intel Open Source Technology Center. > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Monday, April 01, 2013 11:24:37 PM Rafael J. Wysocki wrote: > On Monday, April 01, 2013 02:53:12 PM Bjorn Helgaas wrote: > > On Mon, Apr 1, 2013 at 2:51 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > > > On Monday, April 01, 2013 11:34:46 AM Bjorn Helgaas wrote: > > >> [+cc Zheng, who added this with 71a83bd727] > > >> > > >> On Sat, Mar 30, 2013 at 4:38 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > > >> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > >> > > > >> > The runtime PM of PCIe ports turns out to be quite fragile, as in > > >> > some cases things work while in some other cases they don't and we > > >> > don't seem to have a good way to determine whether or not they are > > >> > going to work in advance. > > >> > > >> Do you have any references to problems encountered when enabling > > >> runtime PM for PCIe ports? That information will be useful to anybody > > >> who wants to take another crack at getting this working. > > > > > > Well, bug 53811 is one example and problems recently reported by > > > Martin are another. Do you want me to dig deeper? > > > > OK, I got this one: > > > > https://bugzilla.kernel.org/show_bug.cgi?id=53811 > > > > Martin has reported a lot of problems lately, and I don't know which > > are related to runtime PM for PCIe ports. I was hoping for a couple > > URLs to put in the changelog so that when somebody gets the itch to > > make this work, they have some useful info to start from. If you > > point me at a specific message, I'll dig up an archive URL for it. > > This is the message in which Martin confirmed that the previous version of > the $subject patch made insert/removal of devices into xHCI ports on his > system work again. > > > Otherwise, I'm afraid we'll just oscillate between "enable PM, find > > bug, disable PM, enable PM, find same bug, disable PM, etc..." > > That's a valid concern, but I think we have an idea about what kind of problems > the runtime PM of PCIe ports may cause to happen (generally, PME and hotplug > notifications may not work as expected). I was thinking about this one in particular: http://marc.info/?l=linux-acpi&m=136460903910718&w=2 Thanks, Rafael
On Tue, Apr 2, 2013 at 4:51 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > > On Monday, April 01, 2013 11:34:46 AM Bjorn Helgaas wrote: > > [+cc Zheng, who added this with 71a83bd727] > > > > On Sat, Mar 30, 2013 at 4:38 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > > > > > The runtime PM of PCIe ports turns out to be quite fragile, as in > > > some cases things work while in some other cases they don't and we > > > don't seem to have a good way to determine whether or not they are > > > going to work in advance. > > > > Do you have any references to problems encountered when enabling > > runtime PM for PCIe ports? That information will be useful to anybody > > who wants to take another crack at getting this working. > > Well, bug 53811 is one example and problems recently reported by > Martin are another. Do you want me to dig deeper? For bug 53811, I have a debug patch posted in bugzilla to disable runtime PM for PCIe port with hotplug capability. It appears that patch resolved the issue for the reporter. Do think that patch can solve the hotplug issue. Best Regards, Huang Ying -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Apr 2, 2013 at 1:28 PM, huang ying <huang.ying.caritas@gmail.com> wrote: > On Tue, Apr 2, 2013 at 4:51 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote: >> >> On Monday, April 01, 2013 11:34:46 AM Bjorn Helgaas wrote: >> > [+cc Zheng, who added this with 71a83bd727] >> > >> > On Sat, Mar 30, 2013 at 4:38 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: >> > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> >> > > >> > > The runtime PM of PCIe ports turns out to be quite fragile, as in >> > > some cases things work while in some other cases they don't and we >> > > don't seem to have a good way to determine whether or not they are >> > > going to work in advance. >> > >> > Do you have any references to problems encountered when enabling >> > runtime PM for PCIe ports? That information will be useful to anybody >> > who wants to take another crack at getting this working. >> >> Well, bug 53811 is one example and problems recently reported by >> Martin are another. Do you want me to dig deeper? > > For bug 53811, I have a debug patch posted in bugzilla to disable > runtime PM for PCIe port with hotplug capability. It appears that > patch resolved the issue for the reporter. Do think that patch can > solve the hotplug issue. For Martin's hotplug issue, it appears that a similar patch I sent to him resolve his hotplug issue too. For Martin's "XHCI dead port" issue, that is, PME issue. I just sent him another debug patch to try. Sorry for late! Best Regards, Huang Ying -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, Bjorn, On Tue, Apr 2, 2013 at 4:53 AM, Bjorn Helgaas <bhelgaas@google.com> wrote: > On Mon, Apr 1, 2013 at 2:51 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: >> On Monday, April 01, 2013 11:34:46 AM Bjorn Helgaas wrote: >>> [+cc Zheng, who added this with 71a83bd727] >>> >>> On Sat, Mar 30, 2013 at 4:38 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: >>> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> >>> > >>> > The runtime PM of PCIe ports turns out to be quite fragile, as in >>> > some cases things work while in some other cases they don't and we >>> > don't seem to have a good way to determine whether or not they are >>> > going to work in advance. >>> >>> Do you have any references to problems encountered when enabling >>> runtime PM for PCIe ports? That information will be useful to anybody >>> who wants to take another crack at getting this working. >> >> Well, bug 53811 is one example and problems recently reported by >> Martin are another. Do you want me to dig deeper? > > OK, I got this one: > > https://bugzilla.kernel.org/show_bug.cgi?id=53811 > > Martin has reported a lot of problems lately, and I don't know which > are related to runtime PM for PCIe ports. I was hoping for a couple > URLs to put in the changelog so that when somebody gets the itch to > make this work, they have some useful info to start from. If you > point me at a specific message, I'll dig up an archive URL for it. > > Otherwise, I'm afraid we'll just oscillate between "enable PM, find > bug, disable PM, enable PM, find same bug, disable PM, etc..." Sorry for late! I am trying to fix a way to fix 53811 and Martin's bug without disable PM for port totally. Best Regards, Huang Ying -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Mar 30, 2013 at 4:38 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > The runtime PM of PCIe ports turns out to be quite fragile, as in > some cases things work while in some other cases they don't and we > don't seem to have a good way to determine whether or not they are > going to work in advance. > > For this reason, avoid enabling runtime PM for PCIe ports by > keeping their runtime PM reference counters always above 0 for the > time being. > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > --- > > This version also removes the no longer necessary (and empty anyway) > port_runtime_pm_black_list[] table. I applied this to for-linus for v3.9, and added a stable tag for v3.6+. Thanks! > --- > drivers/pci/pcie/portdrv_pci.c | 13 ------------- > 1 file changed, 13 deletions(-) > > Index: linux-pm/drivers/pci/pcie/portdrv_pci.c > =================================================================== > --- linux-pm.orig/drivers/pci/pcie/portdrv_pci.c > +++ linux-pm/drivers/pci/pcie/portdrv_pci.c > @@ -185,14 +185,6 @@ static const struct dev_pm_ops pcie_port > #endif /* !PM */ > > /* > - * PCIe port runtime suspend is broken for some chipsets, so use a > - * black list to disable runtime PM for these chipsets. > - */ > -static const struct pci_device_id port_runtime_pm_black_list[] = { > - { /* end: all zeroes */ } > -}; > - > -/* > * pcie_portdrv_probe - Probe PCI-Express port devices > * @dev: PCI-Express port device being probed > * > @@ -225,16 +217,11 @@ static int pcie_portdrv_probe(struct pci > * it by default. > */ > dev->d3cold_allowed = false; > - if (!pci_match_id(port_runtime_pm_black_list, dev)) > - pm_runtime_put_noidle(&dev->dev); > - > return 0; > } > > static void pcie_portdrv_remove(struct pci_dev *dev) > { > - if (!pci_match_id(port_runtime_pm_black_list, dev)) > - pm_runtime_get_noresume(&dev->dev); > pcie_port_device_remove(dev); > pci_disable_device(dev); > } > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Index: linux-pm/drivers/pci/pcie/portdrv_pci.c =================================================================== --- linux-pm.orig/drivers/pci/pcie/portdrv_pci.c +++ linux-pm/drivers/pci/pcie/portdrv_pci.c @@ -185,14 +185,6 @@ static const struct dev_pm_ops pcie_port #endif /* !PM */ /* - * PCIe port runtime suspend is broken for some chipsets, so use a - * black list to disable runtime PM for these chipsets. - */ -static const struct pci_device_id port_runtime_pm_black_list[] = { - { /* end: all zeroes */ } -}; - -/* * pcie_portdrv_probe - Probe PCI-Express port devices * @dev: PCI-Express port device being probed * @@ -225,16 +217,11 @@ static int pcie_portdrv_probe(struct pci * it by default. */ dev->d3cold_allowed = false; - if (!pci_match_id(port_runtime_pm_black_list, dev)) - pm_runtime_put_noidle(&dev->dev); - return 0; } static void pcie_portdrv_remove(struct pci_dev *dev) { - if (!pci_match_id(port_runtime_pm_black_list, dev)) - pm_runtime_get_noresume(&dev->dev); pcie_port_device_remove(dev); pci_disable_device(dev); }