| Message ID | 1365170015-3009-1-git-send-email-thomas.abraham@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Friday, April 05, 2013, Thomas Abraham wrote: > With device core now able to setup the default pin configuration, > the pin configuration code based on the deprecated Samsung specific > gpio bindings is removed. > > Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> I hope that your another patch is merged. ARM: dts: add pinctrl nodes for Exynos5250 SoC I didn't check whether it is applied. Thanks, Seungwon Jeon -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Thomas, Since I commented on previous versions of this patch, I would have loved to have been CCed on this new version. ;) On Fri, Apr 5, 2013 at 6:53 AM, Thomas Abraham <thomas.abraham@linaro.org> wrote: > With device core now able to setup the default pin configuration, > the pin configuration code based on the deprecated Samsung specific > gpio bindings is removed. > > Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> > --- > Changes since v2: > - Changed patch subject from "mmc: dwmmc: let..." to "mmc: dw_mmc: let..." > - Rebased to Chris's latest mmc-next branch. > > drivers/mmc/host/dw_mmc-exynos.c | 38 -------------------------------------- > drivers/mmc/host/dw_mmc.c | 12 ++---------- > drivers/mmc/host/dw_mmc.h | 3 --- > 3 files changed, 2 insertions(+), 51 deletions(-) This patch applies fine but fails to compile on linux-next "next-20130408". You lost the race with: f2f942c mmc: dw_mmc: Check return value of regulator_enable ...that patch adds a "goto err_setup_bus" and you've renamed that label. I guess you get another fun rebase. NOTE: this patch is even more urgent than it was before. It looks like pincontrol stuff has now landed in linux-next which means that Exynos5 devices that need eMMC/SD will no longer boot until this patch goes in. -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 8 April 2013 17:49, Seungwon Jeon <tgih.jun@samsung.com> wrote: > On Friday, April 05, 2013, Thomas Abraham wrote: >> With device core now able to setup the default pin configuration, >> the pin configuration code based on the deprecated Samsung specific >> gpio bindings is removed. >> >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> > Acked-by: Seungwon Jeon <tgih.jun@samsung.com> > > I hope that your another patch is merged. > ARM: dts: add pinctrl nodes for Exynos5250 SoC > I didn't check whether it is applied. Hi Seungwon, Thanks for your Ack. Yes, the pinctrl nodes for Exynos5250 have been merged through kgene's tree. Regards, Thomas. > > Thanks, > Seungwon Jeon > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 8 April 2013 21:38, Doug Anderson <dianders@google.com> wrote: > Thomas, > > Since I commented on previous versions of this patch, I would have > loved to have been CCed on this new version. ;) Hi Doug, Sorry for missing out on CC'ing you in the v3 patch. It just slipped my mind. > > On Fri, Apr 5, 2013 at 6:53 AM, Thomas Abraham > <thomas.abraham@linaro.org> wrote: >> With device core now able to setup the default pin configuration, >> the pin configuration code based on the deprecated Samsung specific >> gpio bindings is removed. >> >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> >> --- >> Changes since v2: >> - Changed patch subject from "mmc: dwmmc: let..." to "mmc: dw_mmc: let..." >> - Rebased to Chris's latest mmc-next branch. >> >> drivers/mmc/host/dw_mmc-exynos.c | 38 -------------------------------------- >> drivers/mmc/host/dw_mmc.c | 12 ++---------- >> drivers/mmc/host/dw_mmc.h | 3 --- >> 3 files changed, 2 insertions(+), 51 deletions(-) > > This patch applies fine but fails to compile on linux-next > "next-20130408". You lost the race with: > f2f942c mmc: dw_mmc: Check return value of regulator_enable > > ...that patch adds a "goto err_setup_bus" and you've renamed that > label. I guess you get another fun rebase. > > NOTE: this patch is even more urgent than it was before. It looks > like pincontrol stuff has now landed in linux-next which means that > Exynos5 devices that need eMMC/SD will no longer boot until this patch > goes in. Ok. I have posted the v4 version of this patch taking care of this. Thanks for pointing this out. Regards, Thomas. > > -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c index c7f0976..f013e7e 100644 --- a/drivers/mmc/host/dw_mmc-exynos.c +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -152,43 +152,6 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host) return 0; } -static int dw_mci_exynos_setup_bus(struct dw_mci *host, - struct device_node *slot_np, u8 bus_width) -{ - int idx, gpio, ret; - - if (!slot_np) - return -EINVAL; - - /* cmd + clock + bus-width pins */ - for (idx = 0; idx < NUM_PINS(bus_width); idx++) { - gpio = of_get_gpio(slot_np, idx); - if (!gpio_is_valid(gpio)) { - dev_err(host->dev, "invalid gpio: %d\n", gpio); - return -EINVAL; - } - - ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus"); - if (ret) { - dev_err(host->dev, "gpio [%d] request failed\n", gpio); - return -EBUSY; - } - } - - if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) - return 0; - - gpio = of_get_named_gpio(slot_np, "samsung,cd-pinmux-gpio", 0); - if (gpio_is_valid(gpio)) { - if (devm_gpio_request(host->dev, gpio, "dw-mci-cd")) - dev_err(host->dev, "gpio [%d] request failed\n", gpio); - } else { - dev_info(host->dev, "cd gpio not available"); - } - - return 0; -} - /* Common capabilities of Exynos4/Exynos5 SoC */ static unsigned long exynos_dwmmc_caps[4] = { MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR | @@ -205,7 +168,6 @@ static const struct dw_mci_drv_data exynos_drv_data = { .prepare_command = dw_mci_exynos_prepare_command, .set_ios = dw_mci_exynos_set_ios, .parse_dt = dw_mci_exynos_parse_dt, - .setup_bus = dw_mci_exynos_setup_bus, }; static const struct of_device_id dw_mci_exynos_match[] = { diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index a443820..2ed9989 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1945,14 +1945,6 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) else bus_width = 1; - if (drv_data && drv_data->setup_bus) { - struct device_node *slot_np; - slot_np = dw_mci_of_find_slot_node(host->dev, slot->id); - ret = drv_data->setup_bus(host, slot_np, bus_width); - if (ret) - goto err_setup_bus; - } - switch (bus_width) { case 8: mmc->caps |= MMC_CAP_8_BIT_DATA; @@ -2002,7 +1994,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) ret = mmc_add_host(mmc); if (ret) - goto err_setup_bus; + goto err_add_host; #if defined(CONFIG_DEBUG_FS) dw_mci_init_debugfs(slot); @@ -2019,7 +2011,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) return 0; -err_setup_bus: +err_add_host: mmc_free_host(mmc); return -EINVAL; } diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index 53b8fd9..0b74189 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -190,7 +190,6 @@ extern int dw_mci_resume(struct dw_mci *host); * @prepare_command: handle CMD register extensions. * @set_ios: handle bus specific extensions. * @parse_dt: parse implementation specific device tree properties. - * @setup_bus: initialize io-interface * * Provide controller implementation specific extensions. The usage of this * data structure is fully optional and usage of each member in this structure @@ -203,7 +202,5 @@ struct dw_mci_drv_data { void (*prepare_command)(struct dw_mci *host, u32 *cmdr); void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios); int (*parse_dt)(struct dw_mci *host); - int (*setup_bus)(struct dw_mci *host, - struct device_node *slot_np, u8 bus_width); }; #endif /* _DW_MMC_H_ */
With device core now able to setup the default pin configuration, the pin configuration code based on the deprecated Samsung specific gpio bindings is removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> --- Changes since v2: - Changed patch subject from "mmc: dwmmc: let..." to "mmc: dw_mmc: let..." - Rebased to Chris's latest mmc-next branch. drivers/mmc/host/dw_mmc-exynos.c | 38 -------------------------------------- drivers/mmc/host/dw_mmc.c | 12 ++---------- drivers/mmc/host/dw_mmc.h | 3 --- 3 files changed, 2 insertions(+), 51 deletions(-)