| Message ID | 1365510362-18379-1-git-send-email-archit@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Apr 9, 2013 at 8:26 AM, Archit Taneja <archit@ti.com> wrote: > When userspace calls SET_PLANE ioctl, drm core takes a reference of the fb and > passes control to the update_plane op defined by the drm driver. > > In omapdrm, we have a worker thread which queues framebuffers objects received > from update_plane and displays them at the appropriate time. > > It is possible that the framebuffer is destoryed by userspace between the time > of calling the ioctl and apply-worker being scheduled. If this happens, the > apply-worker holds a pointer to a framebuffer which is already destroyed. > > Take an extra refernece/unreference of the fb in omap_plane_update() to prevent > this from happening. A reference is taken of the fb passed to update_plane(), > the previous framebuffer (held by plane->fb) is unreferenced. This will prevent > drm from destroying the framebuffer till the time it's unreferenced by the > apply-worker. > > This is in addition to the exisitng reference/unreference in update_pin(), > which is taken for the scanout of the plane's current framebuffer, and an > unreference the previous framebuffer. > > Signed-off-by: Archit Taneja <archit@ti.com> > Cc: Rob Clark <robdclark@gmail.com> Good catch Signed-off-by: Rob Clark <robdclark@gmail.com> > --- > drivers/gpu/drm/omapdrm/omap_plane.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c > index 2882cda..8d225d7 100644 > --- a/drivers/gpu/drm/omapdrm/omap_plane.c > +++ b/drivers/gpu/drm/omapdrm/omap_plane.c > @@ -247,6 +247,12 @@ static int omap_plane_update(struct drm_plane *plane, > { > struct omap_plane *omap_plane = to_omap_plane(plane); > omap_plane->enabled = true; > + > + if (plane->fb) > + drm_framebuffer_unreference(plane->fb); > + > + drm_framebuffer_reference(fb); > + > return omap_plane_mode_set(plane, crtc, fb, > crtc_x, crtc_y, crtc_w, crtc_h, > src_x, src_y, src_w, src_h, > -- > 1.7.10.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Apr 09, 2013 at 05:56:02PM +0530, Archit Taneja wrote: > When userspace calls SET_PLANE ioctl, drm core takes a reference of the fb and > passes control to the update_plane op defined by the drm driver. > > In omapdrm, we have a worker thread which queues framebuffers objects received > from update_plane and displays them at the appropriate time. > > It is possible that the framebuffer is destoryed by userspace between the time > of calling the ioctl and apply-worker being scheduled. If this happens, the > apply-worker holds a pointer to a framebuffer which is already destroyed. > > Take an extra refernece/unreference of the fb in omap_plane_update() to prevent > this from happening. A reference is taken of the fb passed to update_plane(), > the previous framebuffer (held by plane->fb) is unreferenced. This will prevent > drm from destroying the framebuffer till the time it's unreferenced by the > apply-worker. > > This is in addition to the exisitng reference/unreference in update_pin(), > which is taken for the scanout of the plane's current framebuffer, and an > unreference the previous framebuffer. > > Signed-off-by: Archit Taneja <archit@ti.com> > Cc: Rob Clark <robdclark@gmail.com> > --- > drivers/gpu/drm/omapdrm/omap_plane.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c > index 2882cda..8d225d7 100644 > --- a/drivers/gpu/drm/omapdrm/omap_plane.c > +++ b/drivers/gpu/drm/omapdrm/omap_plane.c > @@ -247,6 +247,12 @@ static int omap_plane_update(struct drm_plane *plane, > { > struct omap_plane *omap_plane = to_omap_plane(plane); > omap_plane->enabled = true; > + > + if (plane->fb) > + drm_framebuffer_unreference(plane->fb); Shouldn't the unref only happen once the flip has completed? Otherwise we might free the memory which is still being scanned out and put some other crap there. Note that I've been too lazy to read the code, but I expected the unref of the old one to happen after the ref-taking for the new one, with a vblank wait/delay in between ... Might be that I'm completely off ;-) -Daniel > + > + drm_framebuffer_reference(fb); > + > return omap_plane_mode_set(plane, crtc, fb, > crtc_x, crtc_y, crtc_w, crtc_h, > src_x, src_y, src_w, src_h, > -- > 1.7.10.4 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/dri-devel
On Tue, Apr 9, 2013 at 8:53 AM, Daniel Vetter <daniel@ffwll.ch> wrote: > On Tue, Apr 09, 2013 at 05:56:02PM +0530, Archit Taneja wrote: >> When userspace calls SET_PLANE ioctl, drm core takes a reference of the fb and >> passes control to the update_plane op defined by the drm driver. >> >> In omapdrm, we have a worker thread which queues framebuffers objects received >> from update_plane and displays them at the appropriate time. >> >> It is possible that the framebuffer is destoryed by userspace between the time >> of calling the ioctl and apply-worker being scheduled. If this happens, the >> apply-worker holds a pointer to a framebuffer which is already destroyed. >> >> Take an extra refernece/unreference of the fb in omap_plane_update() to prevent >> this from happening. A reference is taken of the fb passed to update_plane(), >> the previous framebuffer (held by plane->fb) is unreferenced. This will prevent >> drm from destroying the framebuffer till the time it's unreferenced by the >> apply-worker. >> >> This is in addition to the exisitng reference/unreference in update_pin(), >> which is taken for the scanout of the plane's current framebuffer, and an >> unreference the previous framebuffer. >> >> Signed-off-by: Archit Taneja <archit@ti.com> >> Cc: Rob Clark <robdclark@gmail.com> >> --- >> drivers/gpu/drm/omapdrm/omap_plane.c | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c >> index 2882cda..8d225d7 100644 >> --- a/drivers/gpu/drm/omapdrm/omap_plane.c >> +++ b/drivers/gpu/drm/omapdrm/omap_plane.c >> @@ -247,6 +247,12 @@ static int omap_plane_update(struct drm_plane *plane, >> { >> struct omap_plane *omap_plane = to_omap_plane(plane); >> omap_plane->enabled = true; >> + >> + if (plane->fb) >> + drm_framebuffer_unreference(plane->fb); > > Shouldn't the unref only happen once the flip has completed? Otherwise we > might free the memory which is still being scanned out and put some other > crap there. yup, there is a 2nd ref grabbed when we start scanout and dropped when we finish scanout.. so that part was already covered. What wasn't covered before was the time between the ioctl and the worker thread (which was grabbing/dropping the scanout ref) BR, -R > Note that I've been too lazy to read the code, but I expected the unref of > the old one to happen after the ref-taking for the new one, with a vblank > wait/delay in between ... Might be that I'm completely off ;-) > -Daniel > >> + >> + drm_framebuffer_reference(fb); >> + >> return omap_plane_mode_set(plane, crtc, fb, >> crtc_x, crtc_y, crtc_w, crtc_h, >> src_x, src_y, src_w, src_h, >> -- >> 1.7.10.4 >> >> _______________________________________________ >> dri-devel mailing list >> dri-devel@lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/dri-devel > > -- > Daniel Vetter > Software Engineer, Intel Corporation > +41 (0) 79 365 57 48 - http://blog.ffwll.ch -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Apr 9, 2013 at 3:17 PM, Rob Clark <robdclark@gmail.com> wrote: >>> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c >>> index 2882cda..8d225d7 100644 >>> --- a/drivers/gpu/drm/omapdrm/omap_plane.c >>> +++ b/drivers/gpu/drm/omapdrm/omap_plane.c >>> @@ -247,6 +247,12 @@ static int omap_plane_update(struct drm_plane *plane, >>> { >>> struct omap_plane *omap_plane = to_omap_plane(plane); >>> omap_plane->enabled = true; >>> + >>> + if (plane->fb) >>> + drm_framebuffer_unreference(plane->fb); >> >> Shouldn't the unref only happen once the flip has completed? Otherwise we >> might free the memory which is still being scanned out and put some other >> crap there. > > yup, there is a 2nd ref grabbed when we start scanout and dropped when > we finish scanout.. so that part was already covered. What wasn't > covered before was the time between the ioctl and the worker thread > (which was grabbing/dropping the scanout ref) Ah, I see. And the ordering doesn't seem to matter here since it's all protected by locks (against races with the worker thread) anyway. Thanks for the explanation. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c index 2882cda..8d225d7 100644 --- a/drivers/gpu/drm/omapdrm/omap_plane.c +++ b/drivers/gpu/drm/omapdrm/omap_plane.c @@ -247,6 +247,12 @@ static int omap_plane_update(struct drm_plane *plane, { struct omap_plane *omap_plane = to_omap_plane(plane); omap_plane->enabled = true; + + if (plane->fb) + drm_framebuffer_unreference(plane->fb); + + drm_framebuffer_reference(fb); + return omap_plane_mode_set(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, src_x, src_y, src_w, src_h,
When userspace calls SET_PLANE ioctl, drm core takes a reference of the fb and passes control to the update_plane op defined by the drm driver. In omapdrm, we have a worker thread which queues framebuffers objects received from update_plane and displays them at the appropriate time. It is possible that the framebuffer is destoryed by userspace between the time of calling the ioctl and apply-worker being scheduled. If this happens, the apply-worker holds a pointer to a framebuffer which is already destroyed. Take an extra refernece/unreference of the fb in omap_plane_update() to prevent this from happening. A reference is taken of the fb passed to update_plane(), the previous framebuffer (held by plane->fb) is unreferenced. This will prevent drm from destroying the framebuffer till the time it's unreferenced by the apply-worker. This is in addition to the exisitng reference/unreference in update_pin(), which is taken for the scanout of the plane's current framebuffer, and an unreference the previous framebuffer. Signed-off-by: Archit Taneja <archit@ti.com> Cc: Rob Clark <robdclark@gmail.com> --- drivers/gpu/drm/omapdrm/omap_plane.c | 6 ++++++ 1 file changed, 6 insertions(+)