clk: Add device tree binding to clk-fixed-factor

Commit Message

Christian Ruppert April 10, 2013, 3:40 p.m. UTC

This patch adds a device tree binding for the simple fixed factor clock
divider/multiplier of the common clock tree binding.

Signed-off-by: Christian Ruppert <[e-mail]>
---
 .../bindings/clock/fixed-factor-clkdiv.txt         |   24 +++++++++++++++
 drivers/clk/clk-fixed-factor.c                     |   32 ++++++++++++++++++++
 include/linux/clk-provider.h                       |    1 +
 3 files changed, 57 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt

Comments

Gregory CLEMENT April 10, 2013, 3:56 p.m. UTC | #1

Hi Christian,

On 04/10/2013 05:40 PM, Christian Ruppert wrote:
> This patch adds a device tree binding for the simple fixed factor clock
> divider/multiplier of the common clock tree binding.

This patch remind me of something :
http://lists.infradead.org/pipermail/linux-arm-kernel/2012-August/116405.html

Do you have a use case for it, this time?

My version have been hold off waiting for an user for it.
Will you need it for a driver?

Regards,

> 
> Signed-off-by: Christian Ruppert <[e-mail]>
> ---
>  .../bindings/clock/fixed-factor-clkdiv.txt         |   24 +++++++++++++++
>  drivers/clk/clk-fixed-factor.c                     |   32 ++++++++++++++++++++
>  include/linux/clk-provider.h                       |    1 +
>  3 files changed, 57 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
> new file mode 100644
> index 0000000..352bac4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
> @@ -0,0 +1,24 @@
> +Device Tree Clock bindings for plat-tb10x
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible : shall be "fixed-factor-clkdiv"
> +- #clock-cells: from common clock binding; shall be set to 0
> +- clocks: shall be the input parent clock phandle for the clock.
> +- clock-mult: defines the multiplication factor of the output clock frequency
> +  wrt. the input clock frequency.
> +- clock-div: defines the division factor of the output clock frequency wrt.
> +  the input clock frequency.
> +
> +Example:
> +cpu_clk: clkdiv_cpu {	/* CPU clock derived from pll0. 1/2 of pll frequency */
> +	compatible = "fixed-factor-clkdiv";
> +	#clock-cells = <0>;
> +	clocks = <&pll0>;
> +	clock-mult = <1>;
> +	clock-div = <2>;
> +	clock-output-names = "cpu_clk";
> +};
> diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
> index 1ef271e..85e45f1 100644
> --- a/drivers/clk/clk-fixed-factor.c
> +++ b/drivers/clk/clk-fixed-factor.c
> @@ -11,6 +11,7 @@
>  #include <linux/clk-provider.h>
>  #include <linux/slab.h>
>  #include <linux/err.h>
> +#include <linux/of.h>
>  
>  /*
>   * DOC: basic fixed multiplier and divider clock that cannot gate
> @@ -96,3 +97,34 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
>  
>  	return clk;
>  }
> +
> +#ifdef CONFIG_OF
> +/**
> + * of_fixed_factor_clkdiv_setup() - Set up simple fixed factor clock divider
> + */
> +void of_fixed_factor_clkdiv_setup(struct device_node *node)
> +{
> +	struct clk *clk;
> +	const char *clk_name = node->name;
> +	const char *parent_name;
> +	u32 mult, div;
> +
> +	if (of_property_read_u32(node, "clock-mult", &mult))
> +		return;
> +
> +	if (of_property_read_u32(node, "clock-div", &div))
> +		return;
> +
> +	parent_name = of_clk_get_parent_name(node, 0);
> +
> +	of_property_read_string(node, "clock-output-names", &clk_name);
> +
> +	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0,
> +					mult, div);
> +	if (!IS_ERR(clk))
> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
> +}
> +EXPORT_SYMBOL_GPL(of_fixed_factor_clkdiv_setup);
> +CLK_OF_DECLARE(fixed_clkdiv, "fixed-factor-clkdiv",
> +		of_fixed_factor_clkdiv_setup);
> +#endif
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 7f197d7..d4937cf 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -184,6 +184,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
>  		unsigned long fixed_rate);
>  
>  void of_fixed_clk_setup(struct device_node *np);
> +void of_fixed_factor_clkdiv_setup(struct device_node *node);
>  
>  /**
>   * struct clk_gate - gating clock
>

Christian Ruppert April 10, 2013, 4:27 p.m. UTC | #2

Hi Gregory,

We use derived clocks with fixed ratios for our TB10x platform. I
originally had this in the platform code but Vineet (the platform
maintainer) rightly pointed out that the common clock framework would
be the correct place for it.
Is there any reason not to support this functionality? After all, the
generic fixed rate clock also has a device tree binding and I'd guess
we're not the only ones statically deriving one clock from another in
our SOCs.

Greetings,
  Christian

On Wed, Apr 10, 2013 at 05:56:25PM +0200, Gregory CLEMENT wrote:
> Hi Christian,
> 
> On 04/10/2013 05:40 PM, Christian Ruppert wrote:
> > This patch adds a device tree binding for the simple fixed factor clock
> > divider/multiplier of the common clock tree binding.
> 
> This patch remind me of something :
> http://lists.infradead.org/pipermail/linux-arm-kernel/2012-August/116405.html
> 
> Do you have a use case for it, this time?
> 
> My version have been hold off waiting for an user for it.
> Will you need it for a driver?
> 
> Regards,
> 
> > 
> > Signed-off-by: Christian Ruppert <[e-mail]>
> > ---
> >  .../bindings/clock/fixed-factor-clkdiv.txt         |   24 +++++++++++++++
> >  drivers/clk/clk-fixed-factor.c                     |   32 ++++++++++++++++++++
> >  include/linux/clk-provider.h                       |    1 +
> >  3 files changed, 57 insertions(+), 0 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
> > new file mode 100644
> > index 0000000..352bac4
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
> > @@ -0,0 +1,24 @@
> > +Device Tree Clock bindings for plat-tb10x
> > +
> > +This binding uses the common clock binding[1].
> > +
> > +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> > +
> > +Required properties:
> > +- compatible : shall be "fixed-factor-clkdiv"
> > +- #clock-cells: from common clock binding; shall be set to 0
> > +- clocks: shall be the input parent clock phandle for the clock.
> > +- clock-mult: defines the multiplication factor of the output clock frequency
> > +  wrt. the input clock frequency.
> > +- clock-div: defines the division factor of the output clock frequency wrt.
> > +  the input clock frequency.
> > +
> > +Example:
> > +cpu_clk: clkdiv_cpu {	/* CPU clock derived from pll0. 1/2 of pll frequency */
> > +	compatible = "fixed-factor-clkdiv";
> > +	#clock-cells = <0>;
> > +	clocks = <&pll0>;
> > +	clock-mult = <1>;
> > +	clock-div = <2>;
> > +	clock-output-names = "cpu_clk";
> > +};
> > diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
> > index 1ef271e..85e45f1 100644
> > --- a/drivers/clk/clk-fixed-factor.c
> > +++ b/drivers/clk/clk-fixed-factor.c
> > @@ -11,6 +11,7 @@
> >  #include <linux/clk-provider.h>
> >  #include <linux/slab.h>
> >  #include <linux/err.h>
> > +#include <linux/of.h>
> >  
> >  /*
> >   * DOC: basic fixed multiplier and divider clock that cannot gate
> > @@ -96,3 +97,34 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
> >  
> >  	return clk;
> >  }
> > +
> > +#ifdef CONFIG_OF
> > +/**
> > + * of_fixed_factor_clkdiv_setup() - Set up simple fixed factor clock divider
> > + */
> > +void of_fixed_factor_clkdiv_setup(struct device_node *node)
> > +{
> > +	struct clk *clk;
> > +	const char *clk_name = node->name;
> > +	const char *parent_name;
> > +	u32 mult, div;
> > +
> > +	if (of_property_read_u32(node, "clock-mult", &mult))
> > +		return;
> > +
> > +	if (of_property_read_u32(node, "clock-div", &div))
> > +		return;
> > +
> > +	parent_name = of_clk_get_parent_name(node, 0);
> > +
> > +	of_property_read_string(node, "clock-output-names", &clk_name);
> > +
> > +	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0,
> > +					mult, div);
> > +	if (!IS_ERR(clk))
> > +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
> > +}
> > +EXPORT_SYMBOL_GPL(of_fixed_factor_clkdiv_setup);
> > +CLK_OF_DECLARE(fixed_clkdiv, "fixed-factor-clkdiv",
> > +		of_fixed_factor_clkdiv_setup);
> > +#endif
> > diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> > index 7f197d7..d4937cf 100644
> > --- a/include/linux/clk-provider.h
> > +++ b/include/linux/clk-provider.h
> > @@ -184,6 +184,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
> >  		unsigned long fixed_rate);
> >  
> >  void of_fixed_clk_setup(struct device_node *np);
> > +void of_fixed_factor_clkdiv_setup(struct device_node *node);
> >  
> >  /**
> >   * struct clk_gate - gating clock
> > 
> 
> 
> -- 
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com

Christian Ruppert April 11, 2013, 9:19 a.m. UTC | #3

Hi Gregory,

Since there doesn't seem to be anyone opposing this feature I just
checked your patch and after adding the CLK_OF_DECLARE macro in the end
it works well for us. Tell me if you would like to rebase and resubmit
your patch or if I should follow up on our own.

Greetings,
  Christian

On Wed, Apr 10, 2013 at 06:27:47PM +0200, christian ruppert wrote:
> Hi Gregory,
> 
> We use derived clocks with fixed ratios for our TB10x platform. I
> originally had this in the platform code but Vineet (the platform
> maintainer) rightly pointed out that the common clock framework would
> be the correct place for it.
> Is there any reason not to support this functionality? After all, the
> generic fixed rate clock also has a device tree binding and I'd guess
> we're not the only ones statically deriving one clock from another in
> our SOCs.
> 
> Greetings,
>   Christian
> 
> On Wed, Apr 10, 2013 at 05:56:25PM +0200, Gregory CLEMENT wrote:
> > Hi Christian,
> > 
> > On 04/10/2013 05:40 PM, Christian Ruppert wrote:
> > > This patch adds a device tree binding for the simple fixed factor clock
> > > divider/multiplier of the common clock tree binding.
> > 
> > This patch remind me of something :
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2012-August/116405.html
> > 
> > Do you have a use case for it, this time?
> > 
> > My version have been hold off waiting for an user for it.
> > Will you need it for a driver?
> > 
> > Regards,
> > 
> > > 
> > > Signed-off-by: Christian Ruppert <[e-mail]>
> > > ---
> > >  .../bindings/clock/fixed-factor-clkdiv.txt         |   24 +++++++++++++++
> > >  drivers/clk/clk-fixed-factor.c                     |   32 ++++++++++++++++++++
> > >  include/linux/clk-provider.h                       |    1 +
> > >  3 files changed, 57 insertions(+), 0 deletions(-)
> > >  create mode 100644 Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
> > > 
> > > diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
> > > new file mode 100644
> > > index 0000000..352bac4
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
> > > @@ -0,0 +1,24 @@
> > > +Device Tree Clock bindings for plat-tb10x
> > > +
> > > +This binding uses the common clock binding[1].
> > > +
> > > +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> > > +
> > > +Required properties:
> > > +- compatible : shall be "fixed-factor-clkdiv"
> > > +- #clock-cells: from common clock binding; shall be set to 0
> > > +- clocks: shall be the input parent clock phandle for the clock.
> > > +- clock-mult: defines the multiplication factor of the output clock frequency
> > > +  wrt. the input clock frequency.
> > > +- clock-div: defines the division factor of the output clock frequency wrt.
> > > +  the input clock frequency.
> > > +
> > > +Example:
> > > +cpu_clk: clkdiv_cpu {	/* CPU clock derived from pll0. 1/2 of pll frequency */
> > > +	compatible = "fixed-factor-clkdiv";
> > > +	#clock-cells = <0>;
> > > +	clocks = <&pll0>;
> > > +	clock-mult = <1>;
> > > +	clock-div = <2>;
> > > +	clock-output-names = "cpu_clk";
> > > +};
> > > diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
> > > index 1ef271e..85e45f1 100644
> > > --- a/drivers/clk/clk-fixed-factor.c
> > > +++ b/drivers/clk/clk-fixed-factor.c
> > > @@ -11,6 +11,7 @@
> > >  #include <linux/clk-provider.h>
> > >  #include <linux/slab.h>
> > >  #include <linux/err.h>
> > > +#include <linux/of.h>
> > >  
> > >  /*
> > >   * DOC: basic fixed multiplier and divider clock that cannot gate
> > > @@ -96,3 +97,34 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
> > >  
> > >  	return clk;
> > >  }
> > > +
> > > +#ifdef CONFIG_OF
> > > +/**
> > > + * of_fixed_factor_clkdiv_setup() - Set up simple fixed factor clock divider
> > > + */
> > > +void of_fixed_factor_clkdiv_setup(struct device_node *node)
> > > +{
> > > +	struct clk *clk;
> > > +	const char *clk_name = node->name;
> > > +	const char *parent_name;
> > > +	u32 mult, div;
> > > +
> > > +	if (of_property_read_u32(node, "clock-mult", &mult))
> > > +		return;
> > > +
> > > +	if (of_property_read_u32(node, "clock-div", &div))
> > > +		return;
> > > +
> > > +	parent_name = of_clk_get_parent_name(node, 0);
> > > +
> > > +	of_property_read_string(node, "clock-output-names", &clk_name);
> > > +
> > > +	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0,
> > > +					mult, div);
> > > +	if (!IS_ERR(clk))
> > > +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
> > > +}
> > > +EXPORT_SYMBOL_GPL(of_fixed_factor_clkdiv_setup);
> > > +CLK_OF_DECLARE(fixed_clkdiv, "fixed-factor-clkdiv",
> > > +		of_fixed_factor_clkdiv_setup);
> > > +#endif
> > > diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> > > index 7f197d7..d4937cf 100644
> > > --- a/include/linux/clk-provider.h
> > > +++ b/include/linux/clk-provider.h
> > > @@ -184,6 +184,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
> > >  		unsigned long fixed_rate);
> > >  
> > >  void of_fixed_clk_setup(struct device_node *np);
> > > +void of_fixed_factor_clkdiv_setup(struct device_node *node);
> > >  
> > >  /**
> > >   * struct clk_gate - gating clock
> > > 
> > 
> > 
> > -- 
> > Gregory Clement, Free Electrons
> > Kernel, drivers, real-time and embedded Linux
> > development, consulting, training and support.
> > http://free-electrons.com
> 
> -- 
>   Christian Ruppert              ,          <[e-mail]>
>                                 /|
>   Tel: [phone]     //|                 3, Chemin du Pré-Fleuri
>                              _// | bilis Systems   CH-1228 Plan-les-Ouates

Gregory CLEMENT April 11, 2013, 4:26 p.m. UTC | #4

On 04/11/2013 11:19 AM, Christian Ruppert wrote:
> Hi Gregory,
> 
> Since there doesn't seem to be anyone opposing this feature I just
> checked your patch and after adding the CLK_OF_DECLARE macro in the end
> it works well for us. Tell me if you would like to rebase and resubmit
> your patch or if I should follow up on our own.

I can rebase and resubmit my patch, it's pretty straightforward.
The problem was the lack of user in the kernel. And by user I mean
a driver using these functions. Usually a new function enter in the
kernel only if there are users for it inside the kernel so if you plan
to submit a driver using this piece of code, then I see no reason
to not get it.

> 
> Greetings,
>   Christian
> 
> On Wed, Apr 10, 2013 at 06:27:47PM +0200, christian ruppert wrote:
>> Hi Gregory,
>>
>> We use derived clocks with fixed ratios for our TB10x platform. I
>> originally had this in the platform code but Vineet (the platform
>> maintainer) rightly pointed out that the common clock framework would
>> be the correct place for it.
>> Is there any reason not to support this functionality? After all, the
>> generic fixed rate clock also has a device tree binding and I'd guess
>> we're not the only ones statically deriving one clock from another in
>> our SOCs.
>>
>> Greetings,
>>   Christian
>>
>> On Wed, Apr 10, 2013 at 05:56:25PM +0200, Gregory CLEMENT wrote:
>>> Hi Christian,
>>>
>>> On 04/10/2013 05:40 PM, Christian Ruppert wrote:
>>>> This patch adds a device tree binding for the simple fixed factor clock
>>>> divider/multiplier of the common clock tree binding.
>>>
>>> This patch remind me of something :
>>> http://lists.infradead.org/pipermail/linux-arm-kernel/2012-August/116405.html
>>>
>>> Do you have a use case for it, this time?
>>>
>>> My version have been hold off waiting for an user for it.
>>> Will you need it for a driver?
>>>
>>> Regards,
>>>
>>>>
>>>> Signed-off-by: Christian Ruppert <[e-mail]>
>>>> ---
>>>>  .../bindings/clock/fixed-factor-clkdiv.txt         |   24 +++++++++++++++
>>>>  drivers/clk/clk-fixed-factor.c                     |   32 ++++++++++++++++++++
>>>>  include/linux/clk-provider.h                       |    1 +
>>>>  3 files changed, 57 insertions(+), 0 deletions(-)
>>>>  create mode 100644 Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
>>>> new file mode 100644
>>>> index 0000000..352bac4
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
>>>> @@ -0,0 +1,24 @@
>>>> +Device Tree Clock bindings for plat-tb10x
>>>> +
>>>> +This binding uses the common clock binding[1].
>>>> +
>>>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>>>> +
>>>> +Required properties:
>>>> +- compatible : shall be "fixed-factor-clkdiv"
>>>> +- #clock-cells: from common clock binding; shall be set to 0
>>>> +- clocks: shall be the input parent clock phandle for the clock.
>>>> +- clock-mult: defines the multiplication factor of the output clock frequency
>>>> +  wrt. the input clock frequency.
>>>> +- clock-div: defines the division factor of the output clock frequency wrt.
>>>> +  the input clock frequency.
>>>> +
>>>> +Example:
>>>> +cpu_clk: clkdiv_cpu {	/* CPU clock derived from pll0. 1/2 of pll frequency */
>>>> +	compatible = "fixed-factor-clkdiv";
>>>> +	#clock-cells = <0>;
>>>> +	clocks = <&pll0>;
>>>> +	clock-mult = <1>;
>>>> +	clock-div = <2>;
>>>> +	clock-output-names = "cpu_clk";
>>>> +};
>>>> diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
>>>> index 1ef271e..85e45f1 100644
>>>> --- a/drivers/clk/clk-fixed-factor.c
>>>> +++ b/drivers/clk/clk-fixed-factor.c
>>>> @@ -11,6 +11,7 @@
>>>>  #include <linux/clk-provider.h>
>>>>  #include <linux/slab.h>
>>>>  #include <linux/err.h>
>>>> +#include <linux/of.h>
>>>>  
>>>>  /*
>>>>   * DOC: basic fixed multiplier and divider clock that cannot gate
>>>> @@ -96,3 +97,34 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
>>>>  
>>>>  	return clk;
>>>>  }
>>>> +
>>>> +#ifdef CONFIG_OF
>>>> +/**
>>>> + * of_fixed_factor_clkdiv_setup() - Set up simple fixed factor clock divider
>>>> + */
>>>> +void of_fixed_factor_clkdiv_setup(struct device_node *node)
>>>> +{
>>>> +	struct clk *clk;
>>>> +	const char *clk_name = node->name;
>>>> +	const char *parent_name;
>>>> +	u32 mult, div;
>>>> +
>>>> +	if (of_property_read_u32(node, "clock-mult", &mult))
>>>> +		return;
>>>> +
>>>> +	if (of_property_read_u32(node, "clock-div", &div))
>>>> +		return;
>>>> +
>>>> +	parent_name = of_clk_get_parent_name(node, 0);
>>>> +
>>>> +	of_property_read_string(node, "clock-output-names", &clk_name);
>>>> +
>>>> +	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0,
>>>> +					mult, div);
>>>> +	if (!IS_ERR(clk))
>>>> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(of_fixed_factor_clkdiv_setup);
>>>> +CLK_OF_DECLARE(fixed_clkdiv, "fixed-factor-clkdiv",
>>>> +		of_fixed_factor_clkdiv_setup);
>>>> +#endif
>>>> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
>>>> index 7f197d7..d4937cf 100644
>>>> --- a/include/linux/clk-provider.h
>>>> +++ b/include/linux/clk-provider.h
>>>> @@ -184,6 +184,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
>>>>  		unsigned long fixed_rate);
>>>>  
>>>>  void of_fixed_clk_setup(struct device_node *np);
>>>> +void of_fixed_factor_clkdiv_setup(struct device_node *node);
>>>>  
>>>>  /**
>>>>   * struct clk_gate - gating clock
>>>>
>>>
>>>
>>> -- 
>>> Gregory Clement, Free Electrons
>>> Kernel, drivers, real-time and embedded Linux
>>> development, consulting, training and support.
>>> http://free-electrons.com
>>
>> -- 
>>   Christian Ruppert              ,          <[e-mail]>
>>                                 /|
>>   Tel: [phone]     //|                 3, Chemin du Pré-Fleuri
>>                              _// | bilis Systems   CH-1228 Plan-les-Ouates
>

Christian Ruppert April 12, 2013, 6:54 a.m. UTC | #5

On Thu, Apr 11, 2013 at 06:26:07PM +0200, Gregory CLEMENT wrote:
> On 04/11/2013 11:19 AM, Christian Ruppert wrote:
> > Hi Gregory,
> > 
> > Since there doesn't seem to be anyone opposing this feature I just
> > checked your patch and after adding the CLK_OF_DECLARE macro in the end
> > it works well for us. Tell me if you would like to rebase and resubmit
> > your patch or if I should follow up on our own.
> 
> I can rebase and resubmit my patch, it's pretty straightforward.
> The problem was the lack of user in the kernel. And by user I mean
> a driver using these functions. Usually a new function enter in the
> kernel only if there are users for it inside the kernel so if you plan
> to submit a driver using this piece of code, then I see no reason
> to not get it.

If you add the line

CLK_OF_DECLARE(fixed_factor_clk, "fixed-factor-clkdiv", 

in the end of drivers/clk/clk-fixed-factor.c, the new function will be
automatically used by of_clk_init(NULL) which itself is used in numerous
platform ports, in particular arch/arc/plat-tb10x. plat-tb10x is currently
being integrated in the ARC architecture tree. The device tree file
requiring this patch is already in linux-next (see
https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/arch/arc/boot/dts/abilis_*.dtsi).

We didn't know if you wanted to resubmit your patch or if I should
pursue mine at the time, and today it uses the naming scheme from mine.
It would be nice if you could either adapt your patch to that naming
scheme.

Greetings,
  Christian

> > Greetings,
> >   Christian
> > 
> > On Wed, Apr 10, 2013 at 06:27:47PM +0200, christian ruppert wrote:
> >> Hi Gregory,
> >>
> >> We use derived clocks with fixed ratios for our TB10x platform. I
> >> originally had this in the platform code but Vineet (the platform
> >> maintainer) rightly pointed out that the common clock framework would
> >> be the correct place for it.
> >> Is there any reason not to support this functionality? After all, the
> >> generic fixed rate clock also has a device tree binding and I'd guess
> >> we're not the only ones statically deriving one clock from another in
> >> our SOCs.
> >>
> >> Greetings,
> >>   Christian
> >>
> >> On Wed, Apr 10, 2013 at 05:56:25PM +0200, Gregory CLEMENT wrote:
> >>> Hi Christian,
> >>>
> >>> On 04/10/2013 05:40 PM, Christian Ruppert wrote:
> >>>> This patch adds a device tree binding for the simple fixed factor clock
> >>>> divider/multiplier of the common clock tree binding.
> >>>
> >>> This patch remind me of something :
> >>> http://lists.infradead.org/pipermail/linux-arm-kernel/2012-August/116405.html
> >>>
> >>> Do you have a use case for it, this time?
> >>>
> >>> My version have been hold off waiting for an user for it.
> >>> Will you need it for a driver?
> >>>
> >>> Regards,
> >>>
> >>>>
> >>>> Signed-off-by: Christian Ruppert <[e-mail]>
> >>>> ---
> >>>>  .../bindings/clock/fixed-factor-clkdiv.txt         |   24 +++++++++++++++
> >>>>  drivers/clk/clk-fixed-factor.c                     |   32 ++++++++++++++++++++
> >>>>  include/linux/clk-provider.h                       |    1 +
> >>>>  3 files changed, 57 insertions(+), 0 deletions(-)
> >>>>  create mode 100644 Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
> >>>>
> >>>> diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
> >>>> new file mode 100644
> >>>> index 0000000..352bac4
> >>>> --- /dev/null
> >>>> +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
> >>>> @@ -0,0 +1,24 @@
> >>>> +Device Tree Clock bindings for plat-tb10x
> >>>> +
> >>>> +This binding uses the common clock binding[1].
> >>>> +
> >>>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> >>>> +
> >>>> +Required properties:
> >>>> +- compatible : shall be "fixed-factor-clkdiv"
> >>>> +- #clock-cells: from common clock binding; shall be set to 0
> >>>> +- clocks: shall be the input parent clock phandle for the clock.
> >>>> +- clock-mult: defines the multiplication factor of the output clock frequency
> >>>> +  wrt. the input clock frequency.
> >>>> +- clock-div: defines the division factor of the output clock frequency wrt.
> >>>> +  the input clock frequency.
> >>>> +
> >>>> +Example:
> >>>> +cpu_clk: clkdiv_cpu {	/* CPU clock derived from pll0. 1/2 of pll frequency */
> >>>> +	compatible = "fixed-factor-clkdiv";
> >>>> +	#clock-cells = <0>;
> >>>> +	clocks = <&pll0>;
> >>>> +	clock-mult = <1>;
> >>>> +	clock-div = <2>;
> >>>> +	clock-output-names = "cpu_clk";
> >>>> +};
> >>>> diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
> >>>> index 1ef271e..85e45f1 100644
> >>>> --- a/drivers/clk/clk-fixed-factor.c
> >>>> +++ b/drivers/clk/clk-fixed-factor.c
> >>>> @@ -11,6 +11,7 @@
> >>>>  #include <linux/clk-provider.h>
> >>>>  #include <linux/slab.h>
> >>>>  #include <linux/err.h>
> >>>> +#include <linux/of.h>
> >>>>  
> >>>>  /*
> >>>>   * DOC: basic fixed multiplier and divider clock that cannot gate
> >>>> @@ -96,3 +97,34 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
> >>>>  
> >>>>  	return clk;
> >>>>  }
> >>>> +
> >>>> +#ifdef CONFIG_OF
> >>>> +/**
> >>>> + * of_fixed_factor_clkdiv_setup() - Set up simple fixed factor clock divider
> >>>> + */
> >>>> +void of_fixed_factor_clkdiv_setup(struct device_node *node)
> >>>> +{
> >>>> +	struct clk *clk;
> >>>> +	const char *clk_name = node->name;
> >>>> +	const char *parent_name;
> >>>> +	u32 mult, div;
> >>>> +
> >>>> +	if (of_property_read_u32(node, "clock-mult", &mult))
> >>>> +		return;
> >>>> +
> >>>> +	if (of_property_read_u32(node, "clock-div", &div))
> >>>> +		return;
> >>>> +
> >>>> +	parent_name = of_clk_get_parent_name(node, 0);
> >>>> +
> >>>> +	of_property_read_string(node, "clock-output-names", &clk_name);
> >>>> +
> >>>> +	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0,
> >>>> +					mult, div);
> >>>> +	if (!IS_ERR(clk))
> >>>> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
> >>>> +}
> >>>> +EXPORT_SYMBOL_GPL(of_fixed_factor_clkdiv_setup);
> >>>> +CLK_OF_DECLARE(fixed_clkdiv, "fixed-factor-clkdiv",
> >>>> +		of_fixed_factor_clkdiv_setup);
> >>>> +#endif
> >>>> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> >>>> index 7f197d7..d4937cf 100644
> >>>> --- a/include/linux/clk-provider.h
> >>>> +++ b/include/linux/clk-provider.h
> >>>> @@ -184,6 +184,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
> >>>>  		unsigned long fixed_rate);
> >>>>  
> >>>>  void of_fixed_clk_setup(struct device_node *np);
> >>>> +void of_fixed_factor_clkdiv_setup(struct device_node *node);
> >>>>  
> >>>>  /**
> >>>>   * struct clk_gate - gating clock
> >>>>
> >>>
> >>>
> >>> -- 
> >>> Gregory Clement, Free Electrons
> >>> Kernel, drivers, real-time and embedded Linux
> >>> development, consulting, training and support.
> >>> http://free-electrons.com
> >>
> >> -- 
> >>   Christian Ruppert              ,          <[e-mail]>
> >>                                 /|
> >>   Tel: [phone]     //|                 3, Chemin du Pré-Fleuri
> >>                              _// | bilis Systems   CH-1228 Plan-les-Ouates
> > 
> 
> 
> -- 
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com

Gregory CLEMENT April 12, 2013, 7:05 a.m. UTC | #6

On 04/12/2013 08:54 AM, Christian Ruppert wrote:
> On Thu, Apr 11, 2013 at 06:26:07PM +0200, Gregory CLEMENT wrote:
>> On 04/11/2013 11:19 AM, Christian Ruppert wrote:
>>> Hi Gregory,
>>>
>>> Since there doesn't seem to be anyone opposing this feature I just
>>> checked your patch and after adding the CLK_OF_DECLARE macro in the end
>>> it works well for us. Tell me if you would like to rebase and resubmit
>>> your patch or if I should follow up on our own.
>>
>> I can rebase and resubmit my patch, it's pretty straightforward.
>> The problem was the lack of user in the kernel. And by user I mean
>> a driver using these functions. Usually a new function enter in the
>> kernel only if there are users for it inside the kernel so if you plan
>> to submit a driver using this piece of code, then I see no reason
>> to not get it.
> 
> If you add the line
> 
> CLK_OF_DECLARE(fixed_factor_clk, "fixed-factor-clkdiv", 
> 
> in the end of drivers/clk/clk-fixed-factor.c, the new function will be
> automatically used by of_clk_init(NULL) which itself is used in numerous
> platform ports, in particular arch/arc/plat-tb10x. plat-tb10x is currently
> being integrated in the ARC architecture tree. The device tree file
> requiring this patch is already in linux-next (see
> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/arch/arc/boot/dts/abilis_*.dtsi).
> 

great it is good to know there are "user" for this function.

> We didn't know if you wanted to resubmit your patch or if I should
> pursue mine at the time, and today it uses the naming scheme from mine.
> It would be nice if you could either adapt your patch to that naming
> scheme.

I am going to resubmit my patch this morning and adapt it to your naming
scheme.

Regards,


> 
> Greetings,
>   Christian
> 
>>> Greetings,
>>>   Christian
>>>
>>> On Wed, Apr 10, 2013 at 06:27:47PM +0200, christian ruppert wrote:
>>>> Hi Gregory,
>>>>
>>>> We use derived clocks with fixed ratios for our TB10x platform. I
>>>> originally had this in the platform code but Vineet (the platform
>>>> maintainer) rightly pointed out that the common clock framework would
>>>> be the correct place for it.
>>>> Is there any reason not to support this functionality? After all, the
>>>> generic fixed rate clock also has a device tree binding and I'd guess
>>>> we're not the only ones statically deriving one clock from another in
>>>> our SOCs.
>>>>
>>>> Greetings,
>>>>   Christian
>>>>
>>>> On Wed, Apr 10, 2013 at 05:56:25PM +0200, Gregory CLEMENT wrote:
>>>>> Hi Christian,
>>>>>
>>>>> On 04/10/2013 05:40 PM, Christian Ruppert wrote:
>>>>>> This patch adds a device tree binding for the simple fixed factor clock
>>>>>> divider/multiplier of the common clock tree binding.
>>>>>
>>>>> This patch remind me of something :
>>>>> http://lists.infradead.org/pipermail/linux-arm-kernel/2012-August/116405.html
>>>>>
>>>>> Do you have a use case for it, this time?
>>>>>
>>>>> My version have been hold off waiting for an user for it.
>>>>> Will you need it for a driver?
>>>>>
>>>>> Regards,
>>>>>
>>>>>>
>>>>>> Signed-off-by: Christian Ruppert <[e-mail]>
>>>>>> ---
>>>>>>  .../bindings/clock/fixed-factor-clkdiv.txt         |   24 +++++++++++++++
>>>>>>  drivers/clk/clk-fixed-factor.c                     |   32 ++++++++++++++++++++
>>>>>>  include/linux/clk-provider.h                       |    1 +
>>>>>>  3 files changed, 57 insertions(+), 0 deletions(-)
>>>>>>  create mode 100644 Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
>>>>>> new file mode 100644
>>>>>> index 0000000..352bac4
>>>>>> --- /dev/null
>>>>>> +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
>>>>>> @@ -0,0 +1,24 @@
>>>>>> +Device Tree Clock bindings for plat-tb10x
>>>>>> +
>>>>>> +This binding uses the common clock binding[1].
>>>>>> +
>>>>>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>>>>>> +
>>>>>> +Required properties:
>>>>>> +- compatible : shall be "fixed-factor-clkdiv"
>>>>>> +- #clock-cells: from common clock binding; shall be set to 0
>>>>>> +- clocks: shall be the input parent clock phandle for the clock.
>>>>>> +- clock-mult: defines the multiplication factor of the output clock frequency
>>>>>> +  wrt. the input clock frequency.
>>>>>> +- clock-div: defines the division factor of the output clock frequency wrt.
>>>>>> +  the input clock frequency.
>>>>>> +
>>>>>> +Example:
>>>>>> +cpu_clk: clkdiv_cpu {	/* CPU clock derived from pll0. 1/2 of pll frequency */
>>>>>> +	compatible = "fixed-factor-clkdiv";
>>>>>> +	#clock-cells = <0>;
>>>>>> +	clocks = <&pll0>;
>>>>>> +	clock-mult = <1>;
>>>>>> +	clock-div = <2>;
>>>>>> +	clock-output-names = "cpu_clk";
>>>>>> +};
>>>>>> diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
>>>>>> index 1ef271e..85e45f1 100644
>>>>>> --- a/drivers/clk/clk-fixed-factor.c
>>>>>> +++ b/drivers/clk/clk-fixed-factor.c
>>>>>> @@ -11,6 +11,7 @@
>>>>>>  #include <linux/clk-provider.h>
>>>>>>  #include <linux/slab.h>
>>>>>>  #include <linux/err.h>
>>>>>> +#include <linux/of.h>
>>>>>>  
>>>>>>  /*
>>>>>>   * DOC: basic fixed multiplier and divider clock that cannot gate
>>>>>> @@ -96,3 +97,34 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
>>>>>>  
>>>>>>  	return clk;
>>>>>>  }
>>>>>> +
>>>>>> +#ifdef CONFIG_OF
>>>>>> +/**
>>>>>> + * of_fixed_factor_clkdiv_setup() - Set up simple fixed factor clock divider
>>>>>> + */
>>>>>> +void of_fixed_factor_clkdiv_setup(struct device_node *node)
>>>>>> +{
>>>>>> +	struct clk *clk;
>>>>>> +	const char *clk_name = node->name;
>>>>>> +	const char *parent_name;
>>>>>> +	u32 mult, div;
>>>>>> +
>>>>>> +	if (of_property_read_u32(node, "clock-mult", &mult))
>>>>>> +		return;
>>>>>> +
>>>>>> +	if (of_property_read_u32(node, "clock-div", &div))
>>>>>> +		return;
>>>>>> +
>>>>>> +	parent_name = of_clk_get_parent_name(node, 0);
>>>>>> +
>>>>>> +	of_property_read_string(node, "clock-output-names", &clk_name);
>>>>>> +
>>>>>> +	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0,
>>>>>> +					mult, div);
>>>>>> +	if (!IS_ERR(clk))
>>>>>> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
>>>>>> +}
>>>>>> +EXPORT_SYMBOL_GPL(of_fixed_factor_clkdiv_setup);
>>>>>> +CLK_OF_DECLARE(fixed_clkdiv, "fixed-factor-clkdiv",
>>>>>> +		of_fixed_factor_clkdiv_setup);
>>>>>> +#endif
>>>>>> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
>>>>>> index 7f197d7..d4937cf 100644
>>>>>> --- a/include/linux/clk-provider.h
>>>>>> +++ b/include/linux/clk-provider.h
>>>>>> @@ -184,6 +184,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
>>>>>>  		unsigned long fixed_rate);
>>>>>>  
>>>>>>  void of_fixed_clk_setup(struct device_node *np);
>>>>>> +void of_fixed_factor_clkdiv_setup(struct device_node *node);
>>>>>>  
>>>>>>  /**
>>>>>>   * struct clk_gate - gating clock
>>>>>>
>>>>>
>>>>>
>>>>> -- 
>>>>> Gregory Clement, Free Electrons
>>>>> Kernel, drivers, real-time and embedded Linux
>>>>> development, consulting, training and support.
>>>>> http://free-electrons.com
>>>>
>>>> -- 
>>>>   Christian Ruppert              ,          <[e-mail]>
>>>>                                 /|
>>>>   Tel: [phone]     //|                 3, Chemin du Pré-Fleuri
>>>>                              _// | bilis Systems   CH-1228 Plan-les-Ouates
>>>
>>
>>
>> -- 
>> Gregory Clement, Free Electrons
>> Kernel, drivers, real-time and embedded Linux
>> development, consulting, training and support.
>> http://free-electrons.com
>

Gregory CLEMENT April 12, 2013, 9:04 a.m. UTC | #7

On 04/12/2013 08:54 AM, Christian Ruppert wrote:
> On Thu, Apr 11, 2013 at 06:26:07PM +0200, Gregory CLEMENT wrote:
>> On 04/11/2013 11:19 AM, Christian Ruppert wrote:
>>> Hi Gregory,
>>>
>>> Since there doesn't seem to be anyone opposing this feature I just
>>> checked your patch and after adding the CLK_OF_DECLARE macro in the end
>>> it works well for us. Tell me if you would like to rebase and resubmit
>>> your patch or if I should follow up on our own.
>>
>> I can rebase and resubmit my patch, it's pretty straightforward.
>> The problem was the lack of user in the kernel. And by user I mean
>> a driver using these functions. Usually a new function enter in the
>> kernel only if there are users for it inside the kernel so if you plan
>> to submit a driver using this piece of code, then I see no reason
>> to not get it.
> 
> If you add the line
> 
> CLK_OF_DECLARE(fixed_factor_clk, "fixed-factor-clkdiv", 

Why did you add the div suffix?

There is nothing in the function which prevent to have "mul" greater than
"div" and hence having a multiplicative factor.

I think that this suffix is misleading.

> 
> in the end of drivers/clk/clk-fixed-factor.c, the new function will be
> automatically used by of_clk_init(NULL) which itself is used in numerous
> platform ports, in particular arch/arc/plat-tb10x. plat-tb10x is currently
> being integrated in the ARC architecture tree. The device tree file
> requiring this patch is already in linux-next (see
> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/arch/arc/boot/dts/abilis_*.dtsi).
> 
> We didn't know if you wanted to resubmit your patch or if I should
> pursue mine at the time, and today it uses the naming scheme from mine.
> It would be nice if you could either adapt your patch to that naming
> scheme.
> 
> Greetings,
>   Christian
> 
>>> Greetings,
>>>   Christian
>>>
>>> On Wed, Apr 10, 2013 at 06:27:47PM +0200, christian ruppert wrote:
>>>> Hi Gregory,
>>>>
>>>> We use derived clocks with fixed ratios for our TB10x platform. I
>>>> originally had this in the platform code but Vineet (the platform
>>>> maintainer) rightly pointed out that the common clock framework would
>>>> be the correct place for it.
>>>> Is there any reason not to support this functionality? After all, the
>>>> generic fixed rate clock also has a device tree binding and I'd guess
>>>> we're not the only ones statically deriving one clock from another in
>>>> our SOCs.
>>>>
>>>> Greetings,
>>>>   Christian
>>>>
>>>> On Wed, Apr 10, 2013 at 05:56:25PM +0200, Gregory CLEMENT wrote:
>>>>> Hi Christian,
>>>>>
>>>>> On 04/10/2013 05:40 PM, Christian Ruppert wrote:
>>>>>> This patch adds a device tree binding for the simple fixed factor clock
>>>>>> divider/multiplier of the common clock tree binding.
>>>>>
>>>>> This patch remind me of something :
>>>>> http://lists.infradead.org/pipermail/linux-arm-kernel/2012-August/116405.html
>>>>>
>>>>> Do you have a use case for it, this time?
>>>>>
>>>>> My version have been hold off waiting for an user for it.
>>>>> Will you need it for a driver?
>>>>>
>>>>> Regards,
>>>>>
>>>>>>
>>>>>> Signed-off-by: Christian Ruppert <[e-mail]>
>>>>>> ---
>>>>>>  .../bindings/clock/fixed-factor-clkdiv.txt         |   24 +++++++++++++++
>>>>>>  drivers/clk/clk-fixed-factor.c                     |   32 ++++++++++++++++++++
>>>>>>  include/linux/clk-provider.h                       |    1 +
>>>>>>  3 files changed, 57 insertions(+), 0 deletions(-)
>>>>>>  create mode 100644 Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
>>>>>> new file mode 100644
>>>>>> index 0000000..352bac4
>>>>>> --- /dev/null
>>>>>> +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
>>>>>> @@ -0,0 +1,24 @@
>>>>>> +Device Tree Clock bindings for plat-tb10x
>>>>>> +
>>>>>> +This binding uses the common clock binding[1].
>>>>>> +
>>>>>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>>>>>> +
>>>>>> +Required properties:
>>>>>> +- compatible : shall be "fixed-factor-clkdiv"
>>>>>> +- #clock-cells: from common clock binding; shall be set to 0
>>>>>> +- clocks: shall be the input parent clock phandle for the clock.
>>>>>> +- clock-mult: defines the multiplication factor of the output clock frequency
>>>>>> +  wrt. the input clock frequency.
>>>>>> +- clock-div: defines the division factor of the output clock frequency wrt.
>>>>>> +  the input clock frequency.
>>>>>> +
>>>>>> +Example:
>>>>>> +cpu_clk: clkdiv_cpu {	/* CPU clock derived from pll0. 1/2 of pll frequency */
>>>>>> +	compatible = "fixed-factor-clkdiv";
>>>>>> +	#clock-cells = <0>;
>>>>>> +	clocks = <&pll0>;
>>>>>> +	clock-mult = <1>;
>>>>>> +	clock-div = <2>;
>>>>>> +	clock-output-names = "cpu_clk";
>>>>>> +};
>>>>>> diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
>>>>>> index 1ef271e..85e45f1 100644
>>>>>> --- a/drivers/clk/clk-fixed-factor.c
>>>>>> +++ b/drivers/clk/clk-fixed-factor.c
>>>>>> @@ -11,6 +11,7 @@
>>>>>>  #include <linux/clk-provider.h>
>>>>>>  #include <linux/slab.h>
>>>>>>  #include <linux/err.h>
>>>>>> +#include <linux/of.h>
>>>>>>  
>>>>>>  /*
>>>>>>   * DOC: basic fixed multiplier and divider clock that cannot gate
>>>>>> @@ -96,3 +97,34 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
>>>>>>  
>>>>>>  	return clk;
>>>>>>  }
>>>>>> +
>>>>>> +#ifdef CONFIG_OF
>>>>>> +/**
>>>>>> + * of_fixed_factor_clkdiv_setup() - Set up simple fixed factor clock divider
>>>>>> + */
>>>>>> +void of_fixed_factor_clkdiv_setup(struct device_node *node)
>>>>>> +{
>>>>>> +	struct clk *clk;
>>>>>> +	const char *clk_name = node->name;
>>>>>> +	const char *parent_name;
>>>>>> +	u32 mult, div;
>>>>>> +
>>>>>> +	if (of_property_read_u32(node, "clock-mult", &mult))
>>>>>> +		return;
>>>>>> +
>>>>>> +	if (of_property_read_u32(node, "clock-div", &div))
>>>>>> +		return;
>>>>>> +
>>>>>> +	parent_name = of_clk_get_parent_name(node, 0);
>>>>>> +
>>>>>> +	of_property_read_string(node, "clock-output-names", &clk_name);
>>>>>> +
>>>>>> +	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0,
>>>>>> +					mult, div);
>>>>>> +	if (!IS_ERR(clk))
>>>>>> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
>>>>>> +}
>>>>>> +EXPORT_SYMBOL_GPL(of_fixed_factor_clkdiv_setup);
>>>>>> +CLK_OF_DECLARE(fixed_clkdiv, "fixed-factor-clkdiv",
>>>>>> +		of_fixed_factor_clkdiv_setup);
>>>>>> +#endif
>>>>>> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
>>>>>> index 7f197d7..d4937cf 100644
>>>>>> --- a/include/linux/clk-provider.h
>>>>>> +++ b/include/linux/clk-provider.h
>>>>>> @@ -184,6 +184,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
>>>>>>  		unsigned long fixed_rate);
>>>>>>  
>>>>>>  void of_fixed_clk_setup(struct device_node *np);
>>>>>> +void of_fixed_factor_clkdiv_setup(struct device_node *node);
>>>>>>  
>>>>>>  /**
>>>>>>   * struct clk_gate - gating clock
>>>>>>
>>>>>
>>>>>
>>>>> -- 
>>>>> Gregory Clement, Free Electrons
>>>>> Kernel, drivers, real-time and embedded Linux
>>>>> development, consulting, training and support.
>>>>> http://free-electrons.com
>>>>
>>>> -- 
>>>>   Christian Ruppert              ,          <[e-mail]>
>>>>                                 /|
>>>>   Tel: [phone]     //|                 3, Chemin du Pré-Fleuri
>>>>                              _// | bilis Systems   CH-1228 Plan-les-Ouates
>>>
>>
>>
>> -- 
>> Gregory Clement, Free Electrons
>> Kernel, drivers, real-time and embedded Linux
>> development, consulting, training and support.
>> http://free-electrons.com
>

Christian Ruppert April 12, 2013, 9:12 a.m. UTC | #8

On Fri, Apr 12, 2013 at 11:04:51AM +0200, Gregory CLEMENT wrote:
> On 04/12/2013 08:54 AM, Christian Ruppert wrote:
> > On Thu, Apr 11, 2013 at 06:26:07PM +0200, Gregory CLEMENT wrote:
> >> On 04/11/2013 11:19 AM, Christian Ruppert wrote:
> >>> Hi Gregory,
> >>>
> >>> Since there doesn't seem to be anyone opposing this feature I just
> >>> checked your patch and after adding the CLK_OF_DECLARE macro in the end
> >>> it works well for us. Tell me if you would like to rebase and resubmit
> >>> your patch or if I should follow up on our own.
> >>
> >> I can rebase and resubmit my patch, it's pretty straightforward.
> >> The problem was the lack of user in the kernel. And by user I mean
> >> a driver using these functions. Usually a new function enter in the
> >> kernel only if there are users for it inside the kernel so if you plan
> >> to submit a driver using this piece of code, then I see no reason
> >> to not get it.
> > 
> > If you add the line
> > 
> > CLK_OF_DECLARE(fixed_factor_clk, "fixed-factor-clkdiv", 
> 
> Why did you add the div suffix?
> 
> There is nothing in the function which prevent to have "mul" greater than
> "div" and hence having a multiplicative factor.
> 
> I think that this suffix is misleading.

You are right, let's remove it.

> [...]

Gregory CLEMENT April 12, 2013, 9:46 a.m. UTC | #9

On 04/12/2013 11:12 AM, Christian Ruppert wrote:
> On Fri, Apr 12, 2013 at 11:04:51AM +0200, Gregory CLEMENT wrote:
>> On 04/12/2013 08:54 AM, Christian Ruppert wrote:
>>> On Thu, Apr 11, 2013 at 06:26:07PM +0200, Gregory CLEMENT wrote:
>>>> On 04/11/2013 11:19 AM, Christian Ruppert wrote:
>>>>> Hi Gregory,
>>>>>
>>>>> Since there doesn't seem to be anyone opposing this feature I just
>>>>> checked your patch and after adding the CLK_OF_DECLARE macro in the end
>>>>> it works well for us. Tell me if you would like to rebase and resubmit
>>>>> your patch or if I should follow up on our own.
>>>>
>>>> I can rebase and resubmit my patch, it's pretty straightforward.
>>>> The problem was the lack of user in the kernel. And by user I mean
>>>> a driver using these functions. Usually a new function enter in the
>>>> kernel only if there are users for it inside the kernel so if you plan
>>>> to submit a driver using this piece of code, then I see no reason
>>>> to not get it.
>>>
>>> If you add the line
>>>
>>> CLK_OF_DECLARE(fixed_factor_clk, "fixed-factor-clkdiv", 
>>
>> Why did you add the div suffix?
>>
>> There is nothing in the function which prevent to have "mul" greater than
>> "div" and hence having a multiplicative factor.
>>
>> I think that this suffix is misleading.
> 
> You are right, let's remove it.

Great, I am going to send the patch in a couple of minutes.
That means that you will have to ammend your file
arch/arc/boot/dts/abilis_tb10x.dtsi

and for the clock named cpu_clk and ahb_clk you will have to rename
fixed-factor-clkdiv to fixed-factor-clock

Thanks,

> 
>> [...]
>

Patch

diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
new file mode 100644
index 0000000..352bac4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
@@ -0,0 +1,24 @@ 
+Device Tree Clock bindings for plat-tb10x
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "fixed-factor-clkdiv"
+- #clock-cells: from common clock binding; shall be set to 0
+- clocks: shall be the input parent clock phandle for the clock.
+- clock-mult: defines the multiplication factor of the output clock frequency
+  wrt. the input clock frequency.
+- clock-div: defines the division factor of the output clock frequency wrt.
+  the input clock frequency.
+
+Example:
+cpu_clk: clkdiv_cpu {	/* CPU clock derived from pll0. 1/2 of pll frequency */
+	compatible = "fixed-factor-clkdiv";
+	#clock-cells = <0>;
+	clocks = <&pll0>;
+	clock-mult = <1>;
+	clock-div = <2>;
+	clock-output-names = "cpu_clk";
+};
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index 1ef271e..85e45f1 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -11,6 +11,7 @@ 
 #include <linux/clk-provider.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/of.h>
 
 /*
  * DOC: basic fixed multiplier and divider clock that cannot gate
@@ -96,3 +97,34 @@  struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
 
 	return clk;
 }
+
+#ifdef CONFIG_OF
+/**
+ * of_fixed_factor_clkdiv_setup() - Set up simple fixed factor clock divider
+ */
+void of_fixed_factor_clkdiv_setup(struct device_node *node)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	u32 mult, div;
+
+	if (of_property_read_u32(node, "clock-mult", &mult))
+		return;
+
+	if (of_property_read_u32(node, "clock-div", &div))
+		return;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0,
+					mult, div);
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+EXPORT_SYMBOL_GPL(of_fixed_factor_clkdiv_setup);
+CLK_OF_DECLARE(fixed_clkdiv, "fixed-factor-clkdiv",
+		of_fixed_factor_clkdiv_setup);
+#endif
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7f197d7..d4937cf 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -184,6 +184,7 @@  struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 		unsigned long fixed_rate);
 
 void of_fixed_clk_setup(struct device_node *np);
+void of_fixed_factor_clkdiv_setup(struct device_node *node);
 
 /**
  * struct clk_gate - gating clock