| Message ID | 1365692422-9565-4-git-send-email-plagnioj@jcrosoft.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 04/11/2013 05:00 PM, Jean-Christophe PLAGNIOL-VILLARD : > get display timings from device tree > Use videomode helpers to get display timings and configurations from > device tree 2 sentences? Simply elaborate the 2nd one and it will be good. > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> > Cc: linux-fbdev@vger.kernel.org > Cc: Nicolas Ferre <nicolas.ferre@atmel.com> > Cc: Andrew Morton <akpm@linux-foundation.org> > --- > .../devicetree/bindings/video/atmel,lcdc.txt | 75 ++++++ > drivers/video/Kconfig | 2 + > drivers/video/atmel_lcdfb.c | 244 +++++++++++++++++--- > 3 files changed, 289 insertions(+), 32 deletions(-) > create mode 100644 Documentation/devicetree/bindings/video/atmel,lcdc.txt > > diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt > new file mode 100644 > index 0000000..1ec175e > --- /dev/null > +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt Why lcdc? I would have preferred atmel,lcdfb, like the driver's name: it is even more self-explanatory... > @@ -0,0 +1,75 @@ > +Atmel LCDC Framebuffer > +----------------------------------------------------- > + > +Required properties: > +- compatible : > + "atmel,at91sam9261-lcdc" , > + "atmel,at91sam9263-lcdc" , > + "atmel,at91sam9g10-lcdc" , > + "atmel,at91sam9g45-lcdc" , > + "atmel,at91sam9g45es-lcdc" , > + "atmel,at91sam9rl-lcdc" , > + "atmel,at32ap-lcdc" > +- reg : Should contain 1 register ranges(address and length) > +- interrupts : framebuffer controller interrupt > +- display: a phandle pointing to the display node > + > +Required nodes: > +- display: a display node is required to initialize the lcd panel > + This should be in the board dts. > +- default-mode: a videomode within the display with timing parameters > + as specified below. > + > +Example: > + > + fb0: fb@0x00500000 { > + compatible = "atmel,at91sam9g45-lcdc"; > + reg = <0x00500000 0x1000>; > + interrupts = <23 3 0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_fb>; > + display = <&display0>; > + status = "okay"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + }; > + > +Atmel LCDC Display > +----------------------------------------------------- > +Required properties (as per of_videomode_helper): Can you please point somewhere to the documentation: Documentation/devicetree/bindings/video/display-timing.txt > + - atmel,dmacon: dma controler configuration Typo: controller. > + - atmel,lcdcon2: lcd controler configuration Ditto > + - atmel,guard-time: lcd guard time (Delay in frame periods) periods -> period, no? > + - bits-per-pixel: lcd panel bit-depth. > + > +Optional properties (as per of_videomode_helper): > + - atmel,lcdcon-backlight: enable backlight > + - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" Is it a sting, or a number (as seen below)? If it is a number, please tell how to choose the index. > + - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) > + > +Example: > + display0: display { > + bits-per-pixel = <32>; > + atmel,lcdcon-backlight; > + atmel,dmacon = <0x1>; > + atmel,lcdcon2 = <0x80008002>; > + atmel,guard-time = <9>; > + atmel,lcd-wiring-mode = <1>; > + > + display-timings { > + native-mode = <&timing0>; > + timing0: timing0 { > + clock-frequency = <9000000>; > + hactive = <480>; > + vactive = <272>; > + hback-porch = <1>; > + hfront-porch = <1>; > + vback-porch = <40>; > + vfront-porch = <1>; > + hsync-len = <45>; > + vsync-len = <1>; > + }; > + }; > + }; > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig > index 4c1546f..0687482 100644 > --- a/drivers/video/Kconfig > +++ b/drivers/video/Kconfig > @@ -1018,6 +1018,8 @@ config FB_ATMEL > select FB_CFB_FILLRECT > select FB_CFB_COPYAREA > select FB_CFB_IMAGEBLIT > + select FB_MODE_HELPERS > + select OF_VIDEOMODE > help > This enables support for the AT91/AT32 LCD Controller. > > diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c > index f67e226..4a31570 100644 > --- a/drivers/video/atmel_lcdfb.c > +++ b/drivers/video/atmel_lcdfb.c > @@ -20,7 +20,11 @@ > #include <linux/gfp.h> > #include <linux/module.h> > #include <linux/platform_data/atmel.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/of_gpio.h> > #include <video/of_display_timing.h> As said in patch 1/8, this one belongs to this 4/8 patch. > +#include <video/videomode.h> > > #include <mach/cpu.h> > #include <asm/gpio.h> > @@ -59,6 +63,13 @@ struct atmel_lcdfb_info { > struct atmel_lcdfb_config *config; > }; > > +struct atmel_lcdfb_power_ctrl_gpio { > + int gpio; > + int active_low; > + > + struct list_head list; > +}; > + > #define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg)) > #define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg)) > > @@ -945,16 +956,187 @@ static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo) > clk_disable(sinfo->lcdc_clk); > } > > +#ifdef CONFIG_OF > +static const struct of_device_id atmel_lcdfb_dt_ids[] = { > + { .compatible = "atmel,at91sam9261-lcdc" , .data = &at91sam9261_config, }, > + { .compatible = "atmel,at91sam9263-lcdc" , .data = &at91sam9263_config, }, > + { .compatible = "atmel,at91sam9g10-lcdc" , .data = &at91sam9g10_config, }, > + { .compatible = "atmel,at91sam9g45-lcdc" , .data = &at91sam9g45_config, }, > + { .compatible = "atmel,at91sam9g45es-lcdc" , .data = &at91sam9g45es_config, }, > + { .compatible = "atmel,at91sam9rl-lcdc" , .data = &at91sam9rl_config, }, > + { .compatible = "atmel,at32ap-lcdc" , .data = &at32ap_config, }, > + { /* sentinel */ } > +}; > + > +MODULE_DEVICE_TABLE(of, atmel_lcdfb_dt_ids); > + > +static const char *atmel_lcdfb_wiring_modes[] = { > + [ATMEL_LCDC_WIRING_BGR] = "BRG", > + [ATMEL_LCDC_WIRING_RGB] = "RGB", > +}; > + > +const int atmel_lcdfb_get_of_wiring_modes(struct device_node *np) > +{ > + const char *mode; > + int err, i; > + > + err = of_property_read_string(np, "atmel,lcd-wiring-mode", &mode); > + if (err < 0) > + return ATMEL_LCDC_WIRING_BGR; > + > + for (i = 0; i < ARRAY_SIZE(atmel_lcdfb_wiring_modes); i++) > + if (!strcasecmp(mode, atmel_lcdfb_wiring_modes[i])) > + return i; > + > + return -ENODEV; > +} > + > +static void atmel_lcdfb_power_control_gpio(struct atmel_lcdfb_pdata *pdata, int on) > +{ > + struct atmel_lcdfb_power_ctrl_gpio *og; > + > + list_for_each_entry(og, &pdata->pwr_gpios, list) > + gpio_set_value(og->gpio, on); > +} > + > +static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) > +{ > + struct fb_info *info = sinfo->info; > + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; > + struct fb_var_screeninfo *var = &info->var; > + struct device *dev = &sinfo->pdev->dev; > + struct device_node *np =dev->of_node; > + struct device_node *display_np; > + struct device_node *timings_np; > + struct display_timings *timings; > + enum of_gpio_flags flags; > + struct atmel_lcdfb_power_ctrl_gpio *og; > + bool is_gpio_power = false; > + int ret = -ENOENT; > + int i, gpio; > + > + sinfo->config = (struct atmel_lcdfb_config*) > + of_match_device(atmel_lcdfb_dt_ids, dev)->data; Please split it in 2 steps, otherwise the day that the drivers doesn't find the device in dt_ids table, it hangs here with an Oops. > + > + display_np = of_parse_phandle(np, "display", 0); > + if (!display_np) { > + dev_err(dev, "failed to find display phandle\n"); > + return -ENOENT; > + } > + > + ret = of_property_read_u32(display_np, "bits-per-pixel", &var->bits_per_pixel); > + if (ret < 0) { > + dev_err(dev, "failed to get property bits-per-pixel\n"); > + goto put_display_node; > + } > + > + ret = of_property_read_u32(display_np, "atmel,guard-time", &pdata->guard_time); > + if (ret < 0) { > + dev_err(dev, "failed to get property atmel,guard-time\n"); > + goto put_display_node; > + } > + > + ret = of_property_read_u32(display_np, "atmel,lcdcon2", &pdata->default_lcdcon2); > + if (ret < 0) { > + dev_err(dev, "failed to get property atmel,lcdcon2\n"); > + goto put_display_node; > + } > + > + ret = of_property_read_u32(display_np, "atmel,dmacon", &pdata->default_dmacon); > + if (ret < 0) { > + dev_err(dev, "failed to get property bits-per-pixel\n"); No, wrong error message. > + goto put_display_node; > + } > + > + ret = -ENOMEM; > + for (i = 0; i < of_gpio_named_count(display_np, "atmel,power-control-gpio"); i++) { > + gpio = of_get_named_gpio_flags(display_np, "atmel,power-control-gpio", > + i, &flags); > + if (gpio < 0) > + continue; > + > + og = devm_kzalloc(dev, sizeof(*og), GFP_KERNEL); > + if (!og) > + goto put_display_node; > + > + og->gpio = gpio; > + og->active_low = flags & OF_GPIO_ACTIVE_LOW; > + is_gpio_power = true; > + ret = devm_gpio_request(dev, gpio, "lcd-power-control-gpio"); > + if (ret) { > + dev_err(dev, "request gpio %d failed\n", gpio); > + goto put_display_node; > + } > + > + ret = gpio_direction_output(gpio, og->active_low); > + if (ret) { > + dev_err(dev, "set direction output gpio %d failed\n", gpio); > + goto put_display_node; > + } > + } > + > + if (is_gpio_power) > + pdata->atmel_lcdfb_power_control = atmel_lcdfb_power_control_gpio; > + > + ret = atmel_lcdfb_get_of_wiring_modes(display_np); > + if (ret < 0) { > + dev_err(dev, "invalid atmel,lcd-wiring-mode\n"); > + goto put_display_node; > + } > + pdata->lcd_wiring_mode = ret; > + > + pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight"); > + > + timings = of_get_display_timings(display_np); > + if (!timings) { > + dev_err(dev, "failed to get display timings\n"); > + goto put_display_node; > + } > + > + timings_np = of_find_node_by_name(display_np, "display-timings"); > + if (!timings_np) { > + dev_err(dev, "failed to find display-timings node\n"); > + goto put_display_node; > + } > + > + for (i = 0; i < of_get_child_count(timings_np); i++) { > + struct videomode vm; > + struct fb_videomode fb_vm; > + > + ret = videomode_from_timing(timings, &vm, i); > + if (ret < 0) > + goto put_timings_node; > + ret = fb_videomode_from_videomode(&vm, &fb_vm); > + if (ret < 0) > + goto put_timings_node; > + > + fb_add_videomode(&fb_vm, &info->modelist); > + } > + > + return 0; > + > +put_timings_node: > + of_node_put(timings_np); > +put_display_node: > + of_node_put(display_np); > + return ret; > +} > +#else > +static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) > +{ > + return 0; > +} > +#endif > > static int __init atmel_lcdfb_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > struct fb_info *info; > struct atmel_lcdfb_info *sinfo; > - struct atmel_lcdfb_pdata *pdata; > - struct fb_videomode fbmode; > + struct atmel_lcdfb_pdata *pdata = NULL; > struct resource *regs = NULL; > struct resource *map = NULL; > + struct fb_modelist *modelist; > int ret; > > dev_dbg(dev, "%s BEGIN\n", __func__); > @@ -967,17 +1149,35 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) > } > > sinfo = info->par; > + sinfo->pdev = pdev; > + sinfo->info = info; > + > + INIT_LIST_HEAD(&info->modelist); > > - if (dev->platform_data) { > - pdata = (struct atmel_lcdfb_pdata *)dev->platform_data; > + if (pdev->dev.of_node) { > + ret = atmel_lcdfb_of_init(sinfo); > + if (ret) > + goto free_info; > + } else if (dev->platform_data) { > + struct fb_monspecs *monspecs; > + int i; > + > + pdata = dev->platform_data; > + monspecs = pdata->default_monspecs; > sinfo->pdata = *pdata; > + > + for (i = 0; i < monspecs->modedb_len; i++) > + fb_add_videomode(&monspecs->modedb[i], &info->modelist); > + > + sinfo->config = atmel_lcdfb_get_config(pdev); > + > + info->var.bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16; > + memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs)); > } else { > dev_err(dev, "cannot get default configuration\n"); > goto free_info; > } > - sinfo->info = info; > - sinfo->pdev = pdev; > - sinfo->config = atmel_lcdfb_get_config(pdev); > + > if (!sinfo->config) > goto free_info; > > @@ -986,7 +1186,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) > info->pseudo_palette = sinfo->pseudo_palette; > info->fbops = &atmel_lcdfb_ops; > > - memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs)); > info->fix = atmel_lcdfb_fix; > > /* Enable LCDC Clocks */ > @@ -1002,14 +1201,11 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) > } > atmel_lcdfb_start_clock(sinfo); > > - ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb, > - info->monspecs.modedb_len, info->monspecs.modedb, > - pdata->default_bpp); > - if (!ret) { > - dev_err(dev, "no suitable video mode found\n"); > - goto stop_clk; > - } > + modelist = list_first_entry(&info->modelist, > + struct fb_modelist, list); > + fb_videomode_to_var(&info->var, &modelist->mode); > > + atmel_lcdfb_check_var(&info->var, info); > > regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); > if (!regs) { > @@ -1093,18 +1289,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) > goto unregister_irqs; > } > > - /* > - * This makes sure that our colour bitfield > - * descriptors are correctly initialised. > - */ > - atmel_lcdfb_check_var(&info->var, info); > - > - ret = fb_set_var(info, &info->var); > - if (ret) { > - dev_warn(dev, "unable to set display parameters\n"); > - goto free_cmap; > - } > - > dev_set_drvdata(dev, info); > > /* > @@ -1116,10 +1300,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) > goto reset_drvdata; > } > > - /* add selected videomode to modelist */ > - fb_var_to_videomode(&fbmode, &info->var); > - fb_add_videomode(&fbmode, &info->modelist); > - > /* Power up the LCDC screen */ > atmel_lcdfb_power_control(sinfo, 1); > > @@ -1130,7 +1310,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) > > reset_drvdata: > dev_set_drvdata(dev, NULL); > -free_cmap: > fb_dealloc_cmap(&info->cmap); > unregister_irqs: > cancel_work_sync(&sinfo->task); > @@ -1249,6 +1428,7 @@ static struct platform_driver atmel_lcdfb_driver = { > .driver = { > .name = "atmel_lcdfb", > .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(atmel_lcdfb_dt_ids), > }, > }; > >
On 15:42 Tue 16 Apr , Nicolas Ferre wrote: > On 04/11/2013 05:00 PM, Jean-Christophe PLAGNIOL-VILLARD : > > get display timings from device tree > > Use videomode helpers to get display timings and configurations from > > device tree > > 2 sentences? Simply elaborate the 2nd one and it will be good. > > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> > > Cc: linux-fbdev@vger.kernel.org > > Cc: Nicolas Ferre <nicolas.ferre@atmel.com> > > Cc: Andrew Morton <akpm@linux-foundation.org> > > --- > > .../devicetree/bindings/video/atmel,lcdc.txt | 75 ++++++ > > drivers/video/Kconfig | 2 + > > drivers/video/atmel_lcdfb.c | 244 +++++++++++++++++--- > > 3 files changed, 289 insertions(+), 32 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/video/atmel,lcdc.txt > > > > diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt > > new file mode 100644 > > index 0000000..1ec175e > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt > > Why lcdc? I would have preferred atmel,lcdfb, like the driver's name: it > is even more self-explanatory... we do not describe drivers but IP > > > @@ -0,0 +1,75 @@ > > +Atmel LCDC Framebuffer > > +----------------------------------------------------- > > + > > +Required properties: > > +- compatible : > > + "atmel,at91sam9261-lcdc" , > > + "atmel,at91sam9263-lcdc" , > > + "atmel,at91sam9g10-lcdc" , > > + "atmel,at91sam9g45-lcdc" , > > + "atmel,at91sam9g45es-lcdc" , > > + "atmel,at91sam9rl-lcdc" , > > + "atmel,at32ap-lcdc" > > +- reg : Should contain 1 register ranges(address and length) > > +- interrupts : framebuffer controller interrupt > > +- display: a phandle pointing to the display node > > + > > +Required nodes: > > +- display: a display node is required to initialize the lcd panel > > + This should be in the board dts. > > +- default-mode: a videomode within the display with timing parameters > > + as specified below. > > + > > +Example: > > + > > + fb0: fb@0x00500000 { > > + compatible = "atmel,at91sam9g45-lcdc"; > > + reg = <0x00500000 0x1000>; > > + interrupts = <23 3 0>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_fb>; > > + display = <&display0>; > > + status = "okay"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + > > + }; > > + > > +Atmel LCDC Display > > +----------------------------------------------------- > > +Required properties (as per of_videomode_helper): > > Can you please point somewhere to the documentation: > Documentation/devicetree/bindings/video/display-timing.txt > > > + - atmel,dmacon: dma controler configuration > > Typo: controller. > > > + - atmel,lcdcon2: lcd controler configuration > > Ditto > > > + - atmel,guard-time: lcd guard time (Delay in frame periods) > > periods -> period, no? no it's periods even in the datasheet > > > + - bits-per-pixel: lcd panel bit-depth. > > + > > +Optional properties (as per of_videomode_helper): > > + - atmel,lcdcon-backlight: enable backlight > > + - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" > > Is it a sting, or a number (as seen below)? If it is a number, please > tell how to choose the index. String > > > > + - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) > > + > > +Example: > > + display0: display { > > + bits-per-pixel = <32>; > > + atmel,lcdcon-backlight; > > + atmel,dmacon = <0x1>; > > + atmel,lcdcon2 = <0x80008002>; > > + atmel,guard-time = <9>; > > + atmel,lcd-wiring-mode = <1>; > > + > > + display-timings { > > + native-mode = <&timing0>; > > + timing0: timing0 { > > + clock-frequency = <9000000>; > > + hactive = <480>; > > + vactive = <272>; > > + hback-porch = <1>; > > + hfront-porch = <1>; > > + vback-porch = <40>; > > + vfront-porch = <1>; > > + hsync-len = <45>; > > + vsync-len = <1>; > > + }; > > + }; > > + }; > > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig > > index 4c1546f..0687482 100644 > > --- a/drivers/video/Kconfig > > +++ b/drivers/video/Kconfig > > @@ -1018,6 +1018,8 @@ config FB_ATMEL > > select FB_CFB_FILLRECT > > select FB_CFB_COPYAREA > > select FB_CFB_IMAGEBLIT > > + select FB_MODE_HELPERS > > + select OF_VIDEOMODE > > help > > This enables support for the AT91/AT32 LCD Controller. > > > > diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c > > index f67e226..4a31570 100644 > > --- a/drivers/video/atmel_lcdfb.c > > +++ b/drivers/video/atmel_lcdfb.c > > @@ -20,7 +20,11 @@ > > #include <linux/gfp.h> > > #include <linux/module.h> > > #include <linux/platform_data/atmel.h> > > +#include <linux/of.h> > > +#include <linux/of_device.h> > > +#include <linux/of_gpio.h> > > #include <video/of_display_timing.h> > > As said in patch 1/8, this one belongs to this 4/8 patch. > > > +#include <video/videomode.h> > > > > #include <mach/cpu.h> > > #include <asm/gpio.h> > > @@ -59,6 +63,13 @@ struct atmel_lcdfb_info { > > struct atmel_lcdfb_config *config; > > }; > > > > +struct atmel_lcdfb_power_ctrl_gpio { > > + int gpio; > > + int active_low; > > + > > + struct list_head list; > > +}; > > + > > #define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg)) > > #define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg)) > > > > @@ -945,16 +956,187 @@ static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo) > > clk_disable(sinfo->lcdc_clk); > > } > > > > +#ifdef CONFIG_OF > > +static const struct of_device_id atmel_lcdfb_dt_ids[] = { > > + { .compatible = "atmel,at91sam9261-lcdc" , .data = &at91sam9261_config, }, > > + { .compatible = "atmel,at91sam9263-lcdc" , .data = &at91sam9263_config, }, > > + { .compatible = "atmel,at91sam9g10-lcdc" , .data = &at91sam9g10_config, }, > > + { .compatible = "atmel,at91sam9g45-lcdc" , .data = &at91sam9g45_config, }, > > + { .compatible = "atmel,at91sam9g45es-lcdc" , .data = &at91sam9g45es_config, }, > > + { .compatible = "atmel,at91sam9rl-lcdc" , .data = &at91sam9rl_config, }, > > + { .compatible = "atmel,at32ap-lcdc" , .data = &at32ap_config, }, > > + { /* sentinel */ } > > +}; > > + > > +MODULE_DEVICE_TABLE(of, atmel_lcdfb_dt_ids); > > + > > +static const char *atmel_lcdfb_wiring_modes[] = { > > + [ATMEL_LCDC_WIRING_BGR] = "BRG", > > + [ATMEL_LCDC_WIRING_RGB] = "RGB", > > +}; > > + > > +const int atmel_lcdfb_get_of_wiring_modes(struct device_node *np) > > +{ > > + const char *mode; > > + int err, i; > > + > > + err = of_property_read_string(np, "atmel,lcd-wiring-mode", &mode); > > + if (err < 0) > > + return ATMEL_LCDC_WIRING_BGR; > > + > > + for (i = 0; i < ARRAY_SIZE(atmel_lcdfb_wiring_modes); i++) > > + if (!strcasecmp(mode, atmel_lcdfb_wiring_modes[i])) > > + return i; > > + > > + return -ENODEV; > > +} > > + > > +static void atmel_lcdfb_power_control_gpio(struct atmel_lcdfb_pdata *pdata, int on) > > +{ > > + struct atmel_lcdfb_power_ctrl_gpio *og; > > + > > + list_for_each_entry(og, &pdata->pwr_gpios, list) > > + gpio_set_value(og->gpio, on); > > +} > > + > > +static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) > > +{ > > + struct fb_info *info = sinfo->info; > > + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; > > + struct fb_var_screeninfo *var = &info->var; > > + struct device *dev = &sinfo->pdev->dev; > > + struct device_node *np =dev->of_node; > > + struct device_node *display_np; > > + struct device_node *timings_np; > > + struct display_timings *timings; > > + enum of_gpio_flags flags; > > + struct atmel_lcdfb_power_ctrl_gpio *og; > > + bool is_gpio_power = false; > > + int ret = -ENOENT; > > + int i, gpio; > > + > > + sinfo->config = (struct atmel_lcdfb_config*) > > + of_match_device(atmel_lcdfb_dt_ids, dev)->data; > > Please split it in 2 steps, otherwise the day that the drivers doesn't > find the device in dt_ids table, it hangs here with an Oops. no as you will never end here in this case > > > + > > + display_np = of_parse_phandle(np, "display", 0); > > + if (!display_np) { > > + dev_err(dev, "failed to find display phandle\n"); > > + return -ENOENT; > > + } > > + > > + ret = of_property_read_u32(display_np, "bits-per-pixel", &var->bits_per_pixel); > > + if (ret < 0) { > > + dev_err(dev, "failed to get property bits-per-pixel\n"); > > + goto put_display_node; > > + } > > + > > + ret = of_property_read_u32(display_np, "atmel,guard-time", &pdata->guard_time); > > + if (ret < 0) { > > + dev_err(dev, "failed to get property atmel,guard-time\n"); > > + goto put_display_node; > > + } > > + > > + ret = of_property_read_u32(display_np, "atmel,lcdcon2", &pdata->default_lcdcon2); > > + if (ret < 0) { > > + dev_err(dev, "failed to get property atmel,lcdcon2\n"); > > + goto put_display_node; > > + } > > + > > + ret = of_property_read_u32(display_np, "atmel,dmacon", &pdata->default_dmacon); > > + if (ret < 0) { > > + dev_err(dev, "failed to get property bits-per-pixel\n"); > > No, wrong error message. > > > + goto put_display_node; > > + } > > + > > + ret = -ENOMEM; > > + for (i = 0; i < of_gpio_named_count(display_np, "atmel,power-control-gpio"); i++) { > > + gpio = of_get_named_gpio_flags(display_np, "atmel,power-control-gpio", > > + i, &flags); > > + if (gpio < 0) > > + continue; > > + > > + og = devm_kzalloc(dev, sizeof(*og), GFP_KERNEL); > > + if (!og) > > + goto put_display_node; > > + > > + og->gpio = gpio; > > + og->active_low = flags & OF_GPIO_ACTIVE_LOW; > > + is_gpio_power = true; > > + ret = devm_gpio_request(dev, gpio, "lcd-power-control-gpio"); > > + if (ret) { > > + dev_err(dev, "request gpio %d failed\n", gpio); > > + goto put_display_node; > > + } > > + > > + ret = gpio_direction_output(gpio, og->active_low); > > + if (ret) { > > + dev_err(dev, "set direction output gpio %d failed\n", gpio); > > + goto put_display_node; > > + } > > + } > > + > > + if (is_gpio_power) > > + pdata->atmel_lcdfb_power_control = atmel_lcdfb_power_control_gpio; > > + > > + ret = atmel_lcdfb_get_of_wiring_modes(display_np); > > + if (ret < 0) { > > + dev_err(dev, "invalid atmel,lcd-wiring-mode\n"); > > + goto put_display_node; > > + } > > + pdata->lcd_wiring_mode = ret; > > + > > + pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight"); > > + > > + timings = of_get_display_timings(display_np); > > + if (!timings) { > > + dev_err(dev, "failed to get display timings\n"); > > + goto put_display_node; > > + } > > + > > + timings_np = of_find_node_by_name(display_np, "display-timings"); > > + if (!timings_np) { > > + dev_err(dev, "failed to find display-timings node\n"); > > + goto put_display_node; > > + } > > + > > + for (i = 0; i < of_get_child_count(timings_np); i++) { > > + struct videomode vm; > > + struct fb_videomode fb_vm; > > + > > + ret = videomode_from_timing(timings, &vm, i); > > + if (ret < 0) > > + goto put_timings_node; > > + ret = fb_videomode_from_videomode(&vm, &fb_vm); > > + if (ret < 0) > > + goto put_timings_node; > > + > > + fb_add_videomode(&fb_vm, &info->modelist); > > + } > > + > > + return 0; > > + > > +put_timings_node: > > + of_node_put(timings_np); > > +put_display_node: > > + of_node_put(display_np); > > + return ret; > > +} > > +#else > > +static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) > > +{ > > + return 0; > > +} > > +#endif > > > > static int __init atmel_lcdfb_probe(struct platform_device *pdev) > > { > > struct device *dev = &pdev->dev; > > struct fb_info *info; > > struct atmel_lcdfb_info *sinfo; > > - struct atmel_lcdfb_pdata *pdata; > > - struct fb_videomode fbmode; > > + struct atmel_lcdfb_pdata *pdata = NULL; > > struct resource *regs = NULL; > > struct resource *map = NULL; > > + struct fb_modelist *modelist; > > int ret; > > > > dev_dbg(dev, "%s BEGIN\n", __func__); > > @@ -967,17 +1149,35 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) > > } > > > > sinfo = info->par; > > + sinfo->pdev = pdev; > > + sinfo->info = info; > > + > > + INIT_LIST_HEAD(&info->modelist); > > > > - if (dev->platform_data) { > > - pdata = (struct atmel_lcdfb_pdata *)dev->platform_data; > > + if (pdev->dev.of_node) { > > + ret = atmel_lcdfb_of_init(sinfo); > > + if (ret) > > + goto free_info; > > + } else if (dev->platform_data) { > > + struct fb_monspecs *monspecs; > > + int i; > > + > > + pdata = dev->platform_data; > > + monspecs = pdata->default_monspecs; > > sinfo->pdata = *pdata; > > + > > + for (i = 0; i < monspecs->modedb_len; i++) > > + fb_add_videomode(&monspecs->modedb[i], &info->modelist); > > + > > + sinfo->config = atmel_lcdfb_get_config(pdev); > > + > > + info->var.bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16; > > + memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs)); > > } else { > > dev_err(dev, "cannot get default configuration\n"); > > goto free_info; > > } > > - sinfo->info = info; > > - sinfo->pdev = pdev; > > - sinfo->config = atmel_lcdfb_get_config(pdev); > > + > > if (!sinfo->config) > > goto free_info; > > > > @@ -986,7 +1186,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) > > info->pseudo_palette = sinfo->pseudo_palette; > > info->fbops = &atmel_lcdfb_ops; > > > > - memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs)); > > info->fix = atmel_lcdfb_fix; > > > > /* Enable LCDC Clocks */ > > @@ -1002,14 +1201,11 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) > > } > > atmel_lcdfb_start_clock(sinfo); > > > > - ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb, > > - info->monspecs.modedb_len, info->monspecs.modedb, > > - pdata->default_bpp); > > - if (!ret) { > > - dev_err(dev, "no suitable video mode found\n"); > > - goto stop_clk; > > - } > > + modelist = list_first_entry(&info->modelist, > > + struct fb_modelist, list); > > + fb_videomode_to_var(&info->var, &modelist->mode); > > > > + atmel_lcdfb_check_var(&info->var, info); > > > > regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > if (!regs) { > > @@ -1093,18 +1289,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) > > goto unregister_irqs; > > } > > > > - /* > > - * This makes sure that our colour bitfield > > - * descriptors are correctly initialised. > > - */ > > - atmel_lcdfb_check_var(&info->var, info); > > - > > - ret = fb_set_var(info, &info->var); > > - if (ret) { > > - dev_warn(dev, "unable to set display parameters\n"); > > - goto free_cmap; > > - } > > - > > dev_set_drvdata(dev, info); > > > > /* > > @@ -1116,10 +1300,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) > > goto reset_drvdata; > > } > > > > - /* add selected videomode to modelist */ > > - fb_var_to_videomode(&fbmode, &info->var); > > - fb_add_videomode(&fbmode, &info->modelist); > > - > > /* Power up the LCDC screen */ > > atmel_lcdfb_power_control(sinfo, 1); > > > > @@ -1130,7 +1310,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) > > > > reset_drvdata: > > dev_set_drvdata(dev, NULL); > > -free_cmap: > > fb_dealloc_cmap(&info->cmap); > > unregister_irqs: > > cancel_work_sync(&sinfo->task); > > @@ -1249,6 +1428,7 @@ static struct platform_driver atmel_lcdfb_driver = { > > .driver = { > > .name = "atmel_lcdfb", > > .owner = THIS_MODULE, > > + .of_match_table = of_match_ptr(atmel_lcdfb_dt_ids), > > }, > > }; > > > > > > > -- > Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/16/2013 03:44 PM, Jean-Christophe PLAGNIOL-VILLARD : > On 15:42 Tue 16 Apr , Nicolas Ferre wrote: >> On 04/11/2013 05:00 PM, Jean-Christophe PLAGNIOL-VILLARD : >>> get display timings from device tree >>> Use videomode helpers to get display timings and configurations from >>> device tree >> >> 2 sentences? Simply elaborate the 2nd one and it will be good. >> >>> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> >>> Cc: linux-fbdev@vger.kernel.org >>> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> >>> Cc: Andrew Morton <akpm@linux-foundation.org> >>> --- >>> .../devicetree/bindings/video/atmel,lcdc.txt | 75 ++++++ >>> drivers/video/Kconfig | 2 + >>> drivers/video/atmel_lcdfb.c | 244 +++++++++++++++++--- >>> 3 files changed, 289 insertions(+), 32 deletions(-) >>> create mode 100644 Documentation/devicetree/bindings/video/atmel,lcdc.txt >>> >>> diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt >>> new file mode 100644 >>> index 0000000..1ec175e >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt >> >> Why lcdc? I would have preferred atmel,lcdfb, like the driver's name: it >> is even more self-explanatory... > we do not describe drivers but IP fine, but in static const struct platform_device_id atmel_lcdfb_devtypes, we use "xxx-lcdfb" type... >> >>> @@ -0,0 +1,75 @@ >>> +Atmel LCDC Framebuffer >>> +----------------------------------------------------- >>> + >>> +Required properties: >>> +- compatible : >>> + "atmel,at91sam9261-lcdc" , >>> + "atmel,at91sam9263-lcdc" , >>> + "atmel,at91sam9g10-lcdc" , >>> + "atmel,at91sam9g45-lcdc" , >>> + "atmel,at91sam9g45es-lcdc" , >>> + "atmel,at91sam9rl-lcdc" , >>> + "atmel,at32ap-lcdc" >>> +- reg : Should contain 1 register ranges(address and length) >>> +- interrupts : framebuffer controller interrupt >>> +- display: a phandle pointing to the display node >>> + >>> +Required nodes: >>> +- display: a display node is required to initialize the lcd panel >>> + This should be in the board dts. >>> +- default-mode: a videomode within the display with timing parameters >>> + as specified below. >>> + >>> +Example: >>> + >>> + fb0: fb@0x00500000 { >>> + compatible = "atmel,at91sam9g45-lcdc"; >>> + reg = <0x00500000 0x1000>; >>> + interrupts = <23 3 0>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&pinctrl_fb>; >>> + display = <&display0>; >>> + status = "okay"; >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + >>> + }; >>> + >>> +Atmel LCDC Display >>> +----------------------------------------------------- >>> +Required properties (as per of_videomode_helper): >> >> Can you please point somewhere to the documentation: >> Documentation/devicetree/bindings/video/display-timing.txt >> >>> + - atmel,dmacon: dma controler configuration >> >> Typo: controller. >> >>> + - atmel,lcdcon2: lcd controler configuration >> >> Ditto >> >>> + - atmel,guard-time: lcd guard time (Delay in frame periods) >> >> periods -> period, no? > no it's periods even in the datasheet >> >>> + - bits-per-pixel: lcd panel bit-depth. >>> + >>> +Optional properties (as per of_videomode_helper): >>> + - atmel,lcdcon-backlight: enable backlight >>> + - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" >> >> Is it a sting, or a number (as seen below)? If it is a number, please >> tell how to choose the index. > String Okay: so tell it in the description and correct the example below. >>> + - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) >>> + >>> +Example: >>> + display0: display { >>> + bits-per-pixel = <32>; >>> + atmel,lcdcon-backlight; >>> + atmel,dmacon = <0x1>; >>> + atmel,lcdcon2 = <0x80008002>; >>> + atmel,guard-time = <9>; >>> + atmel,lcd-wiring-mode = <1>; Here ----------------------------------^^^^ >>> + >>> + display-timings { >>> + native-mode = <&timing0>; >>> + timing0: timing0 { >>> + clock-frequency = <9000000>; >>> + hactive = <480>; >>> + vactive = <272>; >>> + hback-porch = <1>; >>> + hfront-porch = <1>; >>> + vback-porch = <40>; >>> + vfront-porch = <1>; >>> + hsync-len = <45>; >>> + vsync-len = <1>; >>> + }; >>> + }; >>> + }; >>> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig >>> index 4c1546f..0687482 100644 >>> --- a/drivers/video/Kconfig >>> +++ b/drivers/video/Kconfig >>> @@ -1018,6 +1018,8 @@ config FB_ATMEL >>> select FB_CFB_FILLRECT >>> select FB_CFB_COPYAREA >>> select FB_CFB_IMAGEBLIT >>> + select FB_MODE_HELPERS >>> + select OF_VIDEOMODE >>> help >>> This enables support for the AT91/AT32 LCD Controller. >>> >>> diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c >>> index f67e226..4a31570 100644 >>> --- a/drivers/video/atmel_lcdfb.c >>> +++ b/drivers/video/atmel_lcdfb.c >>> @@ -20,7 +20,11 @@ >>> #include <linux/gfp.h> >>> #include <linux/module.h> >>> #include <linux/platform_data/atmel.h> >>> +#include <linux/of.h> >>> +#include <linux/of_device.h> >>> +#include <linux/of_gpio.h> >>> #include <video/of_display_timing.h> >> >> As said in patch 1/8, this one belongs to this 4/8 patch. >> >>> +#include <video/videomode.h> >>> >>> #include <mach/cpu.h> >>> #include <asm/gpio.h> >>> @@ -59,6 +63,13 @@ struct atmel_lcdfb_info { >>> struct atmel_lcdfb_config *config; >>> }; >>> >>> +struct atmel_lcdfb_power_ctrl_gpio { >>> + int gpio; >>> + int active_low; >>> + >>> + struct list_head list; >>> +}; >>> + >>> #define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg)) >>> #define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg)) >>> >>> @@ -945,16 +956,187 @@ static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo) >>> clk_disable(sinfo->lcdc_clk); >>> } >>> >>> +#ifdef CONFIG_OF >>> +static const struct of_device_id atmel_lcdfb_dt_ids[] = { >>> + { .compatible = "atmel,at91sam9261-lcdc" , .data = &at91sam9261_config, }, >>> + { .compatible = "atmel,at91sam9263-lcdc" , .data = &at91sam9263_config, }, >>> + { .compatible = "atmel,at91sam9g10-lcdc" , .data = &at91sam9g10_config, }, >>> + { .compatible = "atmel,at91sam9g45-lcdc" , .data = &at91sam9g45_config, }, >>> + { .compatible = "atmel,at91sam9g45es-lcdc" , .data = &at91sam9g45es_config, }, >>> + { .compatible = "atmel,at91sam9rl-lcdc" , .data = &at91sam9rl_config, }, >>> + { .compatible = "atmel,at32ap-lcdc" , .data = &at32ap_config, }, >>> + { /* sentinel */ } >>> +}; >>> + >>> +MODULE_DEVICE_TABLE(of, atmel_lcdfb_dt_ids); >>> + >>> +static const char *atmel_lcdfb_wiring_modes[] = { >>> + [ATMEL_LCDC_WIRING_BGR] = "BRG", >>> + [ATMEL_LCDC_WIRING_RGB] = "RGB", >>> +}; >>> + >>> +const int atmel_lcdfb_get_of_wiring_modes(struct device_node *np) >>> +{ >>> + const char *mode; >>> + int err, i; >>> + >>> + err = of_property_read_string(np, "atmel,lcd-wiring-mode", &mode); >>> + if (err < 0) >>> + return ATMEL_LCDC_WIRING_BGR; >>> + >>> + for (i = 0; i < ARRAY_SIZE(atmel_lcdfb_wiring_modes); i++) >>> + if (!strcasecmp(mode, atmel_lcdfb_wiring_modes[i])) >>> + return i; >>> + >>> + return -ENODEV; >>> +} >>> + >>> +static void atmel_lcdfb_power_control_gpio(struct atmel_lcdfb_pdata *pdata, int on) >>> +{ >>> + struct atmel_lcdfb_power_ctrl_gpio *og; >>> + >>> + list_for_each_entry(og, &pdata->pwr_gpios, list) >>> + gpio_set_value(og->gpio, on); >>> +} >>> + >>> +static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) >>> +{ >>> + struct fb_info *info = sinfo->info; >>> + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; >>> + struct fb_var_screeninfo *var = &info->var; >>> + struct device *dev = &sinfo->pdev->dev; >>> + struct device_node *np =dev->of_node; >>> + struct device_node *display_np; >>> + struct device_node *timings_np; >>> + struct display_timings *timings; >>> + enum of_gpio_flags flags; >>> + struct atmel_lcdfb_power_ctrl_gpio *og; >>> + bool is_gpio_power = false; >>> + int ret = -ENOENT; >>> + int i, gpio; >>> + >>> + sinfo->config = (struct atmel_lcdfb_config*) >>> + of_match_device(atmel_lcdfb_dt_ids, dev)->data; >> >> Please split it in 2 steps, otherwise the day that the drivers doesn't >> find the device in dt_ids table, it hangs here with an Oops. > no as you will never end here in this case Ok, I see. >> >>> + >>> + display_np = of_parse_phandle(np, "display", 0); >>> + if (!display_np) { >>> + dev_err(dev, "failed to find display phandle\n"); >>> + return -ENOENT; >>> + } >>> + >>> + ret = of_property_read_u32(display_np, "bits-per-pixel", &var->bits_per_pixel); >>> + if (ret < 0) { >>> + dev_err(dev, "failed to get property bits-per-pixel\n"); >>> + goto put_display_node; >>> + } >>> + >>> + ret = of_property_read_u32(display_np, "atmel,guard-time", &pdata->guard_time); >>> + if (ret < 0) { >>> + dev_err(dev, "failed to get property atmel,guard-time\n"); >>> + goto put_display_node; >>> + } >>> + >>> + ret = of_property_read_u32(display_np, "atmel,lcdcon2", &pdata->default_lcdcon2); >>> + if (ret < 0) { >>> + dev_err(dev, "failed to get property atmel,lcdcon2\n"); >>> + goto put_display_node; >>> + } >>> + >>> + ret = of_property_read_u32(display_np, "atmel,dmacon", &pdata->default_dmacon); >>> + if (ret < 0) { >>> + dev_err(dev, "failed to get property bits-per-pixel\n"); >> >> No, wrong error message. >> >>> + goto put_display_node; >>> + } >>> + >>> + ret = -ENOMEM; >>> + for (i = 0; i < of_gpio_named_count(display_np, "atmel,power-control-gpio"); i++) { >>> + gpio = of_get_named_gpio_flags(display_np, "atmel,power-control-gpio", >>> + i, &flags); >>> + if (gpio < 0) >>> + continue; >>> + >>> + og = devm_kzalloc(dev, sizeof(*og), GFP_KERNEL); >>> + if (!og) >>> + goto put_display_node; >>> + >>> + og->gpio = gpio; >>> + og->active_low = flags & OF_GPIO_ACTIVE_LOW; >>> + is_gpio_power = true; >>> + ret = devm_gpio_request(dev, gpio, "lcd-power-control-gpio"); >>> + if (ret) { >>> + dev_err(dev, "request gpio %d failed\n", gpio); >>> + goto put_display_node; >>> + } >>> + >>> + ret = gpio_direction_output(gpio, og->active_low); >>> + if (ret) { >>> + dev_err(dev, "set direction output gpio %d failed\n", gpio); >>> + goto put_display_node; >>> + } >>> + } >>> + >>> + if (is_gpio_power) >>> + pdata->atmel_lcdfb_power_control = atmel_lcdfb_power_control_gpio; >>> + >>> + ret = atmel_lcdfb_get_of_wiring_modes(display_np); >>> + if (ret < 0) { >>> + dev_err(dev, "invalid atmel,lcd-wiring-mode\n"); >>> + goto put_display_node; >>> + } >>> + pdata->lcd_wiring_mode = ret; >>> + >>> + pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight"); >>> + >>> + timings = of_get_display_timings(display_np); >>> + if (!timings) { >>> + dev_err(dev, "failed to get display timings\n"); >>> + goto put_display_node; >>> + } >>> + >>> + timings_np = of_find_node_by_name(display_np, "display-timings"); >>> + if (!timings_np) { >>> + dev_err(dev, "failed to find display-timings node\n"); >>> + goto put_display_node; >>> + } >>> + >>> + for (i = 0; i < of_get_child_count(timings_np); i++) { >>> + struct videomode vm; >>> + struct fb_videomode fb_vm; >>> + >>> + ret = videomode_from_timing(timings, &vm, i); >>> + if (ret < 0) >>> + goto put_timings_node; >>> + ret = fb_videomode_from_videomode(&vm, &fb_vm); >>> + if (ret < 0) >>> + goto put_timings_node; >>> + >>> + fb_add_videomode(&fb_vm, &info->modelist); >>> + } >>> + >>> + return 0; >>> + >>> +put_timings_node: >>> + of_node_put(timings_np); >>> +put_display_node: >>> + of_node_put(display_np); >>> + return ret; >>> +} >>> +#else >>> +static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) >>> +{ >>> + return 0; >>> +} >>> +#endif >>> >>> static int __init atmel_lcdfb_probe(struct platform_device *pdev) >>> { >>> struct device *dev = &pdev->dev; >>> struct fb_info *info; >>> struct atmel_lcdfb_info *sinfo; >>> - struct atmel_lcdfb_pdata *pdata; >>> - struct fb_videomode fbmode; >>> + struct atmel_lcdfb_pdata *pdata = NULL; >>> struct resource *regs = NULL; >>> struct resource *map = NULL; >>> + struct fb_modelist *modelist; >>> int ret; >>> >>> dev_dbg(dev, "%s BEGIN\n", __func__); >>> @@ -967,17 +1149,35 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) >>> } >>> >>> sinfo = info->par; >>> + sinfo->pdev = pdev; >>> + sinfo->info = info; >>> + >>> + INIT_LIST_HEAD(&info->modelist); >>> >>> - if (dev->platform_data) { >>> - pdata = (struct atmel_lcdfb_pdata *)dev->platform_data; >>> + if (pdev->dev.of_node) { >>> + ret = atmel_lcdfb_of_init(sinfo); >>> + if (ret) >>> + goto free_info; >>> + } else if (dev->platform_data) { >>> + struct fb_monspecs *monspecs; >>> + int i; >>> + >>> + pdata = dev->platform_data; >>> + monspecs = pdata->default_monspecs; >>> sinfo->pdata = *pdata; >>> + >>> + for (i = 0; i < monspecs->modedb_len; i++) >>> + fb_add_videomode(&monspecs->modedb[i], &info->modelist); >>> + >>> + sinfo->config = atmel_lcdfb_get_config(pdev); >>> + >>> + info->var.bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16; >>> + memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs)); >>> } else { >>> dev_err(dev, "cannot get default configuration\n"); >>> goto free_info; >>> } >>> - sinfo->info = info; >>> - sinfo->pdev = pdev; >>> - sinfo->config = atmel_lcdfb_get_config(pdev); >>> + >>> if (!sinfo->config) >>> goto free_info; >>> >>> @@ -986,7 +1186,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) >>> info->pseudo_palette = sinfo->pseudo_palette; >>> info->fbops = &atmel_lcdfb_ops; >>> >>> - memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs)); >>> info->fix = atmel_lcdfb_fix; >>> >>> /* Enable LCDC Clocks */ >>> @@ -1002,14 +1201,11 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) >>> } >>> atmel_lcdfb_start_clock(sinfo); >>> >>> - ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb, >>> - info->monspecs.modedb_len, info->monspecs.modedb, >>> - pdata->default_bpp); >>> - if (!ret) { >>> - dev_err(dev, "no suitable video mode found\n"); >>> - goto stop_clk; >>> - } >>> + modelist = list_first_entry(&info->modelist, >>> + struct fb_modelist, list); >>> + fb_videomode_to_var(&info->var, &modelist->mode); >>> >>> + atmel_lcdfb_check_var(&info->var, info); >>> >>> regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); >>> if (!regs) { >>> @@ -1093,18 +1289,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) >>> goto unregister_irqs; >>> } >>> >>> - /* >>> - * This makes sure that our colour bitfield >>> - * descriptors are correctly initialised. >>> - */ >>> - atmel_lcdfb_check_var(&info->var, info); >>> - >>> - ret = fb_set_var(info, &info->var); >>> - if (ret) { >>> - dev_warn(dev, "unable to set display parameters\n"); >>> - goto free_cmap; >>> - } >>> - >>> dev_set_drvdata(dev, info); >>> >>> /* >>> @@ -1116,10 +1300,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) >>> goto reset_drvdata; >>> } >>> >>> - /* add selected videomode to modelist */ >>> - fb_var_to_videomode(&fbmode, &info->var); >>> - fb_add_videomode(&fbmode, &info->modelist); >>> - >>> /* Power up the LCDC screen */ >>> atmel_lcdfb_power_control(sinfo, 1); >>> >>> @@ -1130,7 +1310,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) >>> >>> reset_drvdata: >>> dev_set_drvdata(dev, NULL); >>> -free_cmap: >>> fb_dealloc_cmap(&info->cmap); >>> unregister_irqs: >>> cancel_work_sync(&sinfo->task); >>> @@ -1249,6 +1428,7 @@ static struct platform_driver atmel_lcdfb_driver = { >>> .driver = { >>> .name = "atmel_lcdfb", >>> .owner = THIS_MODULE, >>> + .of_match_table = of_match_ptr(atmel_lcdfb_dt_ids), >>> }, >>> }; >>> >>> >> >> >> -- >> Nicolas Ferre > >
2013/4/11 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>: > get display timings from device tree > Use videomode helpers to get display timings and configurations from > device tree > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> > Cc: linux-fbdev@vger.kernel.org > Cc: Nicolas Ferre <nicolas.ferre@atmel.com> > Cc: Andrew Morton <akpm@linux-foundation.org> > --- > .../devicetree/bindings/video/atmel,lcdc.txt | 75 ++++++ > drivers/video/Kconfig | 2 + > drivers/video/atmel_lcdfb.c | 244 +++++++++++++++++--- > 3 files changed, 289 insertions(+), 32 deletions(-) > create mode 100644 Documentation/devicetree/bindings/video/atmel,lcdc.txt > > diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt > new file mode 100644 > index 0000000..1ec175e > --- /dev/null > +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt > @@ -0,0 +1,75 @@ > +Atmel LCDC Framebuffer > +----------------------------------------------------- > + > +Required properties: > +- compatible : > + "atmel,at91sam9261-lcdc" , > + "atmel,at91sam9263-lcdc" , > + "atmel,at91sam9g10-lcdc" , > + "atmel,at91sam9g45-lcdc" , > + "atmel,at91sam9g45es-lcdc" , > + "atmel,at91sam9rl-lcdc" , > + "atmel,at32ap-lcdc" > +- reg : Should contain 1 register ranges(address and length) > +- interrupts : framebuffer controller interrupt > +- display: a phandle pointing to the display node > + > +Required nodes: > +- display: a display node is required to initialize the lcd panel > + This should be in the board dts. > +- default-mode: a videomode within the display with timing parameters > + as specified below. > + > +Example: > + > + fb0: fb@0x00500000 { > + compatible = "atmel,at91sam9g45-lcdc"; > + reg = <0x00500000 0x1000>; > + interrupts = <23 3 0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_fb>; > + display = <&display0>; > + status = "okay"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + }; > + > +Atmel LCDC Display > +----------------------------------------------------- > +Required properties (as per of_videomode_helper): > + > + - atmel,dmacon: dma controler configuration > + - atmel,lcdcon2: lcd controler configuration > + - atmel,guard-time: lcd guard time (Delay in frame periods) > + - bits-per-pixel: lcd panel bit-depth. > + > +Optional properties (as per of_videomode_helper): > + - atmel,lcdcon-backlight: enable backlight > + - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" > + - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) still on lcdcon_pol_negative, we can add something like that: - atmel,lcdcon-pwm-pulse-low: Output PWM pulses are low level (high level if not set) > + > +Example: > + display0: display { > + bits-per-pixel = <32>; > + atmel,lcdcon-backlight; > + atmel,dmacon = <0x1>; > + atmel,lcdcon2 = <0x80008002>; > + atmel,guard-time = <9>; > + atmel,lcd-wiring-mode = <1>; > + > + display-timings { > + native-mode = <&timing0>; > + timing0: timing0 { > + clock-frequency = <9000000>; > + hactive = <480>; > + vactive = <272>; > + hback-porch = <1>; > + hfront-porch = <1>; > + vback-porch = <40>; > + vfront-porch = <1>; > + hsync-len = <45>; > + vsync-len = <1>; > + }; > + }; > + }; > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig > index 4c1546f..0687482 100644 > --- a/drivers/video/Kconfig > +++ b/drivers/video/Kconfig > @@ -1018,6 +1018,8 @@ config FB_ATMEL > select FB_CFB_FILLRECT > select FB_CFB_COPYAREA > select FB_CFB_IMAGEBLIT > + select FB_MODE_HELPERS > + select OF_VIDEOMODE > help > This enables support for the AT91/AT32 LCD Controller. > > diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c > index f67e226..4a31570 100644 > --- a/drivers/video/atmel_lcdfb.c > +++ b/drivers/video/atmel_lcdfb.c > @@ -20,7 +20,11 @@ > #include <linux/gfp.h> > #include <linux/module.h> > #include <linux/platform_data/atmel.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/of_gpio.h> > #include <video/of_display_timing.h> > +#include <video/videomode.h> > > #include <mach/cpu.h> > #include <asm/gpio.h> > @@ -59,6 +63,13 @@ struct atmel_lcdfb_info { > struct atmel_lcdfb_config *config; > }; > > +struct atmel_lcdfb_power_ctrl_gpio { > + int gpio; > + int active_low; > + > + struct list_head list; > +}; > + > #define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg)) > #define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg)) > > @@ -945,16 +956,187 @@ static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo) > clk_disable(sinfo->lcdc_clk); > } > > +#ifdef CONFIG_OF > +static const struct of_device_id atmel_lcdfb_dt_ids[] = { > + { .compatible = "atmel,at91sam9261-lcdc" , .data = &at91sam9261_config, }, > + { .compatible = "atmel,at91sam9263-lcdc" , .data = &at91sam9263_config, }, > + { .compatible = "atmel,at91sam9g10-lcdc" , .data = &at91sam9g10_config, }, > + { .compatible = "atmel,at91sam9g45-lcdc" , .data = &at91sam9g45_config, }, > + { .compatible = "atmel,at91sam9g45es-lcdc" , .data = &at91sam9g45es_config, }, > + { .compatible = "atmel,at91sam9rl-lcdc" , .data = &at91sam9rl_config, }, > + { .compatible = "atmel,at32ap-lcdc" , .data = &at32ap_config, }, > + { /* sentinel */ } > +}; > + > +MODULE_DEVICE_TABLE(of, atmel_lcdfb_dt_ids); > + > +static const char *atmel_lcdfb_wiring_modes[] = { > + [ATMEL_LCDC_WIRING_BGR] = "BRG", > + [ATMEL_LCDC_WIRING_RGB] = "RGB", > +}; > + > +const int atmel_lcdfb_get_of_wiring_modes(struct device_node *np) > +{ > + const char *mode; > + int err, i; > + > + err = of_property_read_string(np, "atmel,lcd-wiring-mode", &mode); > + if (err < 0) > + return ATMEL_LCDC_WIRING_BGR; > + > + for (i = 0; i < ARRAY_SIZE(atmel_lcdfb_wiring_modes); i++) > + if (!strcasecmp(mode, atmel_lcdfb_wiring_modes[i])) > + return i; > + > + return -ENODEV; > +} > + > +static void atmel_lcdfb_power_control_gpio(struct atmel_lcdfb_pdata *pdata, int on) > +{ > + struct atmel_lcdfb_power_ctrl_gpio *og; > + > + list_for_each_entry(og, &pdata->pwr_gpios, list) > + gpio_set_value(og->gpio, on); > +} > + > +static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) > +{ > + struct fb_info *info = sinfo->info; > + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; > + struct fb_var_screeninfo *var = &info->var; > + struct device *dev = &sinfo->pdev->dev; > + struct device_node *np =dev->of_node; > + struct device_node *display_np; > + struct device_node *timings_np; > + struct display_timings *timings; > + enum of_gpio_flags flags; > + struct atmel_lcdfb_power_ctrl_gpio *og; > + bool is_gpio_power = false; > + int ret = -ENOENT; > + int i, gpio; > + > + sinfo->config = (struct atmel_lcdfb_config*) > + of_match_device(atmel_lcdfb_dt_ids, dev)->data; > + > + display_np = of_parse_phandle(np, "display", 0); > + if (!display_np) { > + dev_err(dev, "failed to find display phandle\n"); > + return -ENOENT; > + } > + > + ret = of_property_read_u32(display_np, "bits-per-pixel", &var->bits_per_pixel); > + if (ret < 0) { > + dev_err(dev, "failed to get property bits-per-pixel\n"); > + goto put_display_node; > + } > + > + ret = of_property_read_u32(display_np, "atmel,guard-time", &pdata->guard_time); > + if (ret < 0) { > + dev_err(dev, "failed to get property atmel,guard-time\n"); > + goto put_display_node; > + } > + > + ret = of_property_read_u32(display_np, "atmel,lcdcon2", &pdata->default_lcdcon2); > + if (ret < 0) { > + dev_err(dev, "failed to get property atmel,lcdcon2\n"); > + goto put_display_node; > + } > + > + ret = of_property_read_u32(display_np, "atmel,dmacon", &pdata->default_dmacon); > + if (ret < 0) { > + dev_err(dev, "failed to get property bits-per-pixel\n"); > + goto put_display_node; > + } > + > + ret = -ENOMEM; > + for (i = 0; i < of_gpio_named_count(display_np, "atmel,power-control-gpio"); i++) { > + gpio = of_get_named_gpio_flags(display_np, "atmel,power-control-gpio", > + i, &flags); > + if (gpio < 0) > + continue; > + > + og = devm_kzalloc(dev, sizeof(*og), GFP_KERNEL); > + if (!og) > + goto put_display_node; > + > + og->gpio = gpio; > + og->active_low = flags & OF_GPIO_ACTIVE_LOW; > + is_gpio_power = true; > + ret = devm_gpio_request(dev, gpio, "lcd-power-control-gpio"); > + if (ret) { > + dev_err(dev, "request gpio %d failed\n", gpio); > + goto put_display_node; > + } > + > + ret = gpio_direction_output(gpio, og->active_low); > + if (ret) { > + dev_err(dev, "set direction output gpio %d failed\n", gpio); > + goto put_display_node; > + } > + } > + > + if (is_gpio_power) > + pdata->atmel_lcdfb_power_control = atmel_lcdfb_power_control_gpio; > + > + ret = atmel_lcdfb_get_of_wiring_modes(display_np); > + if (ret < 0) { > + dev_err(dev, "invalid atmel,lcd-wiring-mode\n"); > + goto put_display_node; > + } > + pdata->lcd_wiring_mode = ret; > + > + pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight"); and here, something like: pdata->lcdcon_pol_negative = of_property_read_bool(display_np, "atmel,lcdcon-pwm-pulse-low"); would be nice Regards, Richard. -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt new file mode 100644 index 0000000..1ec175e --- /dev/null +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt @@ -0,0 +1,75 @@ +Atmel LCDC Framebuffer +----------------------------------------------------- + +Required properties: +- compatible : + "atmel,at91sam9261-lcdc" , + "atmel,at91sam9263-lcdc" , + "atmel,at91sam9g10-lcdc" , + "atmel,at91sam9g45-lcdc" , + "atmel,at91sam9g45es-lcdc" , + "atmel,at91sam9rl-lcdc" , + "atmel,at32ap-lcdc" +- reg : Should contain 1 register ranges(address and length) +- interrupts : framebuffer controller interrupt +- display: a phandle pointing to the display node + +Required nodes: +- display: a display node is required to initialize the lcd panel + This should be in the board dts. +- default-mode: a videomode within the display with timing parameters + as specified below. + +Example: + + fb0: fb@0x00500000 { + compatible = "atmel,at91sam9g45-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 3 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + display = <&display0>; + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; + + }; + +Atmel LCDC Display +----------------------------------------------------- +Required properties (as per of_videomode_helper): + + - atmel,dmacon: dma controler configuration + - atmel,lcdcon2: lcd controler configuration + - atmel,guard-time: lcd guard time (Delay in frame periods) + - bits-per-pixel: lcd panel bit-depth. + +Optional properties (as per of_videomode_helper): + - atmel,lcdcon-backlight: enable backlight + - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" + - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) + +Example: + display0: display { + bits-per-pixel = <32>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <9>; + atmel,lcd-wiring-mode = <1>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <1>; + hfront-porch = <1>; + vback-porch = <40>; + vfront-porch = <1>; + hsync-len = <45>; + vsync-len = <1>; + }; + }; + }; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 4c1546f..0687482 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1018,6 +1018,8 @@ config FB_ATMEL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_MODE_HELPERS + select OF_VIDEOMODE help This enables support for the AT91/AT32 LCD Controller. diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index f67e226..4a31570 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -20,7 +20,11 @@ #include <linux/gfp.h> #include <linux/module.h> #include <linux/platform_data/atmel.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> #include <video/of_display_timing.h> +#include <video/videomode.h> #include <mach/cpu.h> #include <asm/gpio.h> @@ -59,6 +63,13 @@ struct atmel_lcdfb_info { struct atmel_lcdfb_config *config; }; +struct atmel_lcdfb_power_ctrl_gpio { + int gpio; + int active_low; + + struct list_head list; +}; + #define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg)) #define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg)) @@ -945,16 +956,187 @@ static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo) clk_disable(sinfo->lcdc_clk); } +#ifdef CONFIG_OF +static const struct of_device_id atmel_lcdfb_dt_ids[] = { + { .compatible = "atmel,at91sam9261-lcdc" , .data = &at91sam9261_config, }, + { .compatible = "atmel,at91sam9263-lcdc" , .data = &at91sam9263_config, }, + { .compatible = "atmel,at91sam9g10-lcdc" , .data = &at91sam9g10_config, }, + { .compatible = "atmel,at91sam9g45-lcdc" , .data = &at91sam9g45_config, }, + { .compatible = "atmel,at91sam9g45es-lcdc" , .data = &at91sam9g45es_config, }, + { .compatible = "atmel,at91sam9rl-lcdc" , .data = &at91sam9rl_config, }, + { .compatible = "atmel,at32ap-lcdc" , .data = &at32ap_config, }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmel_lcdfb_dt_ids); + +static const char *atmel_lcdfb_wiring_modes[] = { + [ATMEL_LCDC_WIRING_BGR] = "BRG", + [ATMEL_LCDC_WIRING_RGB] = "RGB", +}; + +const int atmel_lcdfb_get_of_wiring_modes(struct device_node *np) +{ + const char *mode; + int err, i; + + err = of_property_read_string(np, "atmel,lcd-wiring-mode", &mode); + if (err < 0) + return ATMEL_LCDC_WIRING_BGR; + + for (i = 0; i < ARRAY_SIZE(atmel_lcdfb_wiring_modes); i++) + if (!strcasecmp(mode, atmel_lcdfb_wiring_modes[i])) + return i; + + return -ENODEV; +} + +static void atmel_lcdfb_power_control_gpio(struct atmel_lcdfb_pdata *pdata, int on) +{ + struct atmel_lcdfb_power_ctrl_gpio *og; + + list_for_each_entry(og, &pdata->pwr_gpios, list) + gpio_set_value(og->gpio, on); +} + +static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) +{ + struct fb_info *info = sinfo->info; + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; + struct fb_var_screeninfo *var = &info->var; + struct device *dev = &sinfo->pdev->dev; + struct device_node *np =dev->of_node; + struct device_node *display_np; + struct device_node *timings_np; + struct display_timings *timings; + enum of_gpio_flags flags; + struct atmel_lcdfb_power_ctrl_gpio *og; + bool is_gpio_power = false; + int ret = -ENOENT; + int i, gpio; + + sinfo->config = (struct atmel_lcdfb_config*) + of_match_device(atmel_lcdfb_dt_ids, dev)->data; + + display_np = of_parse_phandle(np, "display", 0); + if (!display_np) { + dev_err(dev, "failed to find display phandle\n"); + return -ENOENT; + } + + ret = of_property_read_u32(display_np, "bits-per-pixel", &var->bits_per_pixel); + if (ret < 0) { + dev_err(dev, "failed to get property bits-per-pixel\n"); + goto put_display_node; + } + + ret = of_property_read_u32(display_np, "atmel,guard-time", &pdata->guard_time); + if (ret < 0) { + dev_err(dev, "failed to get property atmel,guard-time\n"); + goto put_display_node; + } + + ret = of_property_read_u32(display_np, "atmel,lcdcon2", &pdata->default_lcdcon2); + if (ret < 0) { + dev_err(dev, "failed to get property atmel,lcdcon2\n"); + goto put_display_node; + } + + ret = of_property_read_u32(display_np, "atmel,dmacon", &pdata->default_dmacon); + if (ret < 0) { + dev_err(dev, "failed to get property bits-per-pixel\n"); + goto put_display_node; + } + + ret = -ENOMEM; + for (i = 0; i < of_gpio_named_count(display_np, "atmel,power-control-gpio"); i++) { + gpio = of_get_named_gpio_flags(display_np, "atmel,power-control-gpio", + i, &flags); + if (gpio < 0) + continue; + + og = devm_kzalloc(dev, sizeof(*og), GFP_KERNEL); + if (!og) + goto put_display_node; + + og->gpio = gpio; + og->active_low = flags & OF_GPIO_ACTIVE_LOW; + is_gpio_power = true; + ret = devm_gpio_request(dev, gpio, "lcd-power-control-gpio"); + if (ret) { + dev_err(dev, "request gpio %d failed\n", gpio); + goto put_display_node; + } + + ret = gpio_direction_output(gpio, og->active_low); + if (ret) { + dev_err(dev, "set direction output gpio %d failed\n", gpio); + goto put_display_node; + } + } + + if (is_gpio_power) + pdata->atmel_lcdfb_power_control = atmel_lcdfb_power_control_gpio; + + ret = atmel_lcdfb_get_of_wiring_modes(display_np); + if (ret < 0) { + dev_err(dev, "invalid atmel,lcd-wiring-mode\n"); + goto put_display_node; + } + pdata->lcd_wiring_mode = ret; + + pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight"); + + timings = of_get_display_timings(display_np); + if (!timings) { + dev_err(dev, "failed to get display timings\n"); + goto put_display_node; + } + + timings_np = of_find_node_by_name(display_np, "display-timings"); + if (!timings_np) { + dev_err(dev, "failed to find display-timings node\n"); + goto put_display_node; + } + + for (i = 0; i < of_get_child_count(timings_np); i++) { + struct videomode vm; + struct fb_videomode fb_vm; + + ret = videomode_from_timing(timings, &vm, i); + if (ret < 0) + goto put_timings_node; + ret = fb_videomode_from_videomode(&vm, &fb_vm); + if (ret < 0) + goto put_timings_node; + + fb_add_videomode(&fb_vm, &info->modelist); + } + + return 0; + +put_timings_node: + of_node_put(timings_np); +put_display_node: + of_node_put(display_np); + return ret; +} +#else +static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) +{ + return 0; +} +#endif static int __init atmel_lcdfb_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct fb_info *info; struct atmel_lcdfb_info *sinfo; - struct atmel_lcdfb_pdata *pdata; - struct fb_videomode fbmode; + struct atmel_lcdfb_pdata *pdata = NULL; struct resource *regs = NULL; struct resource *map = NULL; + struct fb_modelist *modelist; int ret; dev_dbg(dev, "%s BEGIN\n", __func__); @@ -967,17 +1149,35 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) } sinfo = info->par; + sinfo->pdev = pdev; + sinfo->info = info; + + INIT_LIST_HEAD(&info->modelist); - if (dev->platform_data) { - pdata = (struct atmel_lcdfb_pdata *)dev->platform_data; + if (pdev->dev.of_node) { + ret = atmel_lcdfb_of_init(sinfo); + if (ret) + goto free_info; + } else if (dev->platform_data) { + struct fb_monspecs *monspecs; + int i; + + pdata = dev->platform_data; + monspecs = pdata->default_monspecs; sinfo->pdata = *pdata; + + for (i = 0; i < monspecs->modedb_len; i++) + fb_add_videomode(&monspecs->modedb[i], &info->modelist); + + sinfo->config = atmel_lcdfb_get_config(pdev); + + info->var.bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16; + memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs)); } else { dev_err(dev, "cannot get default configuration\n"); goto free_info; } - sinfo->info = info; - sinfo->pdev = pdev; - sinfo->config = atmel_lcdfb_get_config(pdev); + if (!sinfo->config) goto free_info; @@ -986,7 +1186,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) info->pseudo_palette = sinfo->pseudo_palette; info->fbops = &atmel_lcdfb_ops; - memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs)); info->fix = atmel_lcdfb_fix; /* Enable LCDC Clocks */ @@ -1002,14 +1201,11 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) } atmel_lcdfb_start_clock(sinfo); - ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb, - info->monspecs.modedb_len, info->monspecs.modedb, - pdata->default_bpp); - if (!ret) { - dev_err(dev, "no suitable video mode found\n"); - goto stop_clk; - } + modelist = list_first_entry(&info->modelist, + struct fb_modelist, list); + fb_videomode_to_var(&info->var, &modelist->mode); + atmel_lcdfb_check_var(&info->var, info); regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) { @@ -1093,18 +1289,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) goto unregister_irqs; } - /* - * This makes sure that our colour bitfield - * descriptors are correctly initialised. - */ - atmel_lcdfb_check_var(&info->var, info); - - ret = fb_set_var(info, &info->var); - if (ret) { - dev_warn(dev, "unable to set display parameters\n"); - goto free_cmap; - } - dev_set_drvdata(dev, info); /* @@ -1116,10 +1300,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) goto reset_drvdata; } - /* add selected videomode to modelist */ - fb_var_to_videomode(&fbmode, &info->var); - fb_add_videomode(&fbmode, &info->modelist); - /* Power up the LCDC screen */ atmel_lcdfb_power_control(sinfo, 1); @@ -1130,7 +1310,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) reset_drvdata: dev_set_drvdata(dev, NULL); -free_cmap: fb_dealloc_cmap(&info->cmap); unregister_irqs: cancel_work_sync(&sinfo->task); @@ -1249,6 +1428,7 @@ static struct platform_driver atmel_lcdfb_driver = { .driver = { .name = "atmel_lcdfb", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(atmel_lcdfb_dt_ids), }, };
get display timings from device tree Use videomode helpers to get display timings and configurations from device tree Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: linux-fbdev@vger.kernel.org Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Morton <akpm@linux-foundation.org> --- .../devicetree/bindings/video/atmel,lcdc.txt | 75 ++++++ drivers/video/Kconfig | 2 + drivers/video/atmel_lcdfb.c | 244 +++++++++++++++++--- 3 files changed, 289 insertions(+), 32 deletions(-) create mode 100644 Documentation/devicetree/bindings/video/atmel,lcdc.txt