| Message ID | 1366225778-6083-2-git-send-email-dmurphy@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 04/17/2013 02:09 PM, Dan Murphy wrote: > The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es > are different. > > Abstract away the pinmux and the LED definitions for the two boards. Just a heads-up but you should base this upon Benoit's for_3.10 branch [1] as there is now a omap4-panda-common.dtsi where the led stuff currently resides. Cheers Jon [1] http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/log/?h=for_3.10/dts -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/17/2013 02:18 PM, Jon Hunter wrote: > On 04/17/2013 02:09 PM, Dan Murphy wrote: >> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es >> are different. >> >> Abstract away the pinmux and the LED definitions for the two boards. > Just a heads-up but you should base this upon Benoit's for_3.10 branch > [1] as there is now a omap4-panda-common.dtsi where the led stuff > currently resides. > > Cheers > Jon > > [1] > http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/log/?h=for_3.10/dts Thanks Jon. Will resend against Benoit's tree. Dan
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 73bc1a6..42fdd86 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -31,3 +31,36 @@ 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ >; }; + +&leds { + compatible = "gpio-leds"; + heartbeat { + label = "pandaboard::status1"; + gpios = <&gpio4 14 0>; + linux,default-trigger = "heartbeat"; + }; + mmc { + label = "pandaboard::status2"; + gpios = <&gpio1 8 0>; + linux,default-trigger = "gpio"; + }; +}; + +&led_gpio_pins { + pinctrl-single,pins = < + 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */ + >; +}; + +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &led_wkgpio_pins + >; + + led_wkgpio_pins: pinmux_leds_wkpins { + pinctrl-single,pins = < + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 4122efe..465c4b0b8 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -19,7 +19,7 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; - leds { + leds: leds{ compatible = "gpio-leds"; heartbeat { label = "pandaboard::status1"; @@ -67,6 +67,7 @@ &mcbsp1_pins &dss_hdmi_pins &tpd12s015_pins + &led_gpio_pins >; twl6040_pins: pinmux_twl6040_pins { @@ -110,6 +111,25 @@ 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ >; }; + + led_gpio_pins: pinmux_leds_pins { + pinctrl-single,pins = < + >; + }; +}; + +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &led_wkgpio_pins + >; + + led_wkgpio_pins: pinmux_leds_wkpins { + pinctrl-single,pins = < + 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */ + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ + >; + }; }; &i2c1 {
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es are different. Abstract away the pinmux and the LED definitions for the two boards. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- arch/arm/boot/dts/omap4-panda-es.dts | 33 +++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap4-panda.dts | 22 +++++++++++++++++++++- 2 files changed, 54 insertions(+), 1 deletion(-)