@@ -10,6 +10,7 @@
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>
+#include <linux/of_pci.h>
struct device_node;
@@ -132,10 +133,6 @@ extern void setup_indirect_pci(struct pci_controller *hose,
extern struct pci_controller *pci_find_hose_for_OF_device(
struct device_node *node);
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
- struct device_node *dev, int primary);
-
/* Allocate & free a PCI host bridge structure */
extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
@@ -622,198 +622,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
*end = rsrc->end - offset;
}
-/**
- * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
- * @hose: newly allocated pci_controller to be setup
- * @dev: device node of the host bridge
- * @primary: set if primary bus (32 bits only, soon to be deprecated)
- *
- * This function will parse the "ranges" property of a PCI host bridge device
- * node and setup the resource mapping of a pci controller based on its
- * content.
- *
- * Life would be boring if it wasn't for a few issues that we have to deal
- * with here:
- *
- * - We can only cope with one IO space range and up to 3 Memory space
- * ranges. However, some machines (thanks Apple !) tend to split their
- * space into lots of small contiguous ranges. So we have to coalesce.
- *
- * - We can only cope with all memory ranges having the same offset
- * between CPU addresses and PCI addresses. Unfortunately, some bridges
- * are setup for a large 1:1 mapping along with a small "window" which
- * maps PCI address 0 to some arbitrary high address of the CPU space in
- * order to give access to the ISA memory hole.
- * The way out of here that I've chosen for now is to always set the
- * offset based on the first resource found, then override it if we
- * have a different offset and the previous was set by an ISA hole.
- *
- * - Some busses have IO space not starting at 0, which causes trouble with
- * the way we do our IO resource renumbering. The code somewhat deals with
- * it for 64 bits but I would expect problems on 32 bits.
- *
- * - Some 32 bits platforms such as 4xx can have physical space larger than
- * 32 bits so we need to use 64 bits values for the parsing
- */
-void pci_process_bridge_OF_ranges(struct pci_controller *hose,
- struct device_node *dev, int primary)
-{
- const u32 *ranges;
- int rlen;
- int pna = of_n_addr_cells(dev);
- int np = pna + 5;
- int memno = 0, isa_hole = -1;
- u32 pci_space;
- unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
- unsigned long long isa_mb = 0;
- struct resource *res;
-
- pr_info("PCI host bridge %s %s ranges:\n",
- dev->full_name, primary ? "(primary)" : "");
-
- /* Get ranges property */
- ranges = of_get_property(dev, "ranges", &rlen);
- if (ranges == NULL)
- return;
-
- /* Parse it */
- pr_debug("Parsing ranges property...\n");
- while ((rlen -= np * 4) >= 0) {
- /* Read next ranges element */
- pci_space = ranges[0];
- pci_addr = of_read_number(ranges + 1, 2);
- cpu_addr = of_translate_address(dev, ranges + 3);
- size = of_read_number(ranges + pna + 3, 2);
-
- pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
- pci_space, pci_addr);
- pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
- cpu_addr, size);
-
- ranges += np;
-
- /* If we failed translation or got a zero-sized region
- * (some FW try to feed us with non sensical zero sized regions
- * such as power3 which look like some kind of attempt
- * at exposing the VGA memory hole)
- */
- if (cpu_addr == OF_BAD_ADDR || size == 0)
- continue;
-
- /* Now consume following elements while they are contiguous */
- for (; rlen >= np * sizeof(u32);
- ranges += np, rlen -= np * 4) {
- if (ranges[0] != pci_space)
- break;
- pci_next = of_read_number(ranges + 1, 2);
- cpu_next = of_translate_address(dev, ranges + 3);
- if (pci_next != pci_addr + size ||
- cpu_next != cpu_addr + size)
- break;
- size += of_read_number(ranges + pna + 3, 2);
- }
-
- /* Act based on address space type */
- res = NULL;
- switch ((pci_space >> 24) & 0x3) {
- case 1: /* PCI IO space */
- pr_info(" IO 0x%016llx..0x%016llx -> 0x%016llx\n",
- cpu_addr, cpu_addr + size - 1, pci_addr);
-
- /* We support only one IO range */
- if (hose->pci_io_size) {
- pr_info(" \\--> Skipped (too many) !\n");
- continue;
- }
- /* On 32 bits, limit I/O space to 16MB */
- if (size > 0x01000000)
- size = 0x01000000;
-
- /* 32 bits needs to map IOs here */
- hose->io_base_virt = ioremap(cpu_addr, size);
-
- /* Expect trouble if pci_addr is not 0 */
- if (primary)
- isa_io_base =
- (unsigned long)hose->io_base_virt;
- /* pci_io_size and io_base_phys always represent IO
- * space starting at 0 so we factor in pci_addr
- */
- hose->pci_io_size = pci_addr + size;
- hose->io_base_phys = cpu_addr - pci_addr;
-
- /* Build resource */
- res = &hose->io_resource;
- res->flags = IORESOURCE_IO;
- res->start = pci_addr;
- break;
- case 2: /* PCI Memory space */
- case 3: /* PCI 64 bits Memory space */
- pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
- cpu_addr, cpu_addr + size - 1, pci_addr,
- (pci_space & 0x40000000) ? "Prefetch" : "");
-
- /* We support only 3 memory ranges */
- if (memno >= 3) {
- pr_info(" \\--> Skipped (too many) !\n");
- continue;
- }
- /* Handles ISA memory hole space here */
- if (pci_addr == 0) {
- isa_mb = cpu_addr;
- isa_hole = memno;
- if (primary || isa_mem_base == 0)
- isa_mem_base = cpu_addr;
- hose->isa_mem_phys = cpu_addr;
- hose->isa_mem_size = size;
- }
-
- /* We get the PCI/Mem offset from the first range or
- * the, current one if the offset came from an ISA
- * hole. If they don't match, bugger.
- */
- if (memno == 0 ||
- (isa_hole >= 0 && pci_addr != 0 &&
- hose->pci_mem_offset == isa_mb))
- hose->pci_mem_offset = cpu_addr - pci_addr;
- else if (pci_addr != 0 &&
- hose->pci_mem_offset != cpu_addr - pci_addr) {
- pr_info(" \\--> Skipped (offset mismatch) !\n");
- continue;
- }
-
- /* Build resource */
- res = &hose->mem_resources[memno++];
- res->flags = IORESOURCE_MEM;
- if (pci_space & 0x40000000)
- res->flags |= IORESOURCE_PREFETCH;
- res->start = cpu_addr;
- break;
- }
- if (res != NULL) {
- res->name = dev->full_name;
- res->end = res->start + size - 1;
- res->parent = NULL;
- res->sibling = NULL;
- res->child = NULL;
- }
- }
-
- /* If there's an ISA hole and the pci_mem_offset is -not- matching
- * the ISA hole offset, then we need to remove the ISA hole from
- * the resource list for that brige
- */
- if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
- unsigned int next = isa_hole + 1;
- pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb);
- if (next < memno)
- memmove(&hose->mem_resources[isa_hole],
- &hose->mem_resources[next],
- sizeof(struct resource) * (memno - next));
- hose->mem_resources[--memno].flags = 0;
- }
-}
-
/* Decide whether to display the domain number in /proc */
int pci_proc_domain(struct pci_bus *bus)
{
@@ -10,6 +10,7 @@
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>
+#include <linux/of_pci.h>
#include <asm-generic/pci-bridge.h>
struct device_node;
@@ -231,10 +232,6 @@ extern int pcibios_map_io_space(struct pci_bus *bus);
extern struct pci_controller *pci_find_hose_for_OF_device(
struct device_node* node);
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
- struct device_node *dev, int primary);
-
/* Allocate & free a PCI host bridge structure */
extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
@@ -640,198 +640,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
*end = rsrc->end - offset;
}
-/**
- * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
- * @hose: newly allocated pci_controller to be setup
- * @dev: device node of the host bridge
- * @primary: set if primary bus (32 bits only, soon to be deprecated)
- *
- * This function will parse the "ranges" property of a PCI host bridge device
- * node and setup the resource mapping of a pci controller based on its
- * content.
- *
- * Life would be boring if it wasn't for a few issues that we have to deal
- * with here:
- *
- * - We can only cope with one IO space range and up to 3 Memory space
- * ranges. However, some machines (thanks Apple !) tend to split their
- * space into lots of small contiguous ranges. So we have to coalesce.
- *
- * - We can only cope with all memory ranges having the same offset
- * between CPU addresses and PCI addresses. Unfortunately, some bridges
- * are setup for a large 1:1 mapping along with a small "window" which
- * maps PCI address 0 to some arbitrary high address of the CPU space in
- * order to give access to the ISA memory hole.
- * The way out of here that I've chosen for now is to always set the
- * offset based on the first resource found, then override it if we
- * have a different offset and the previous was set by an ISA hole.
- *
- * - Some busses have IO space not starting at 0, which causes trouble with
- * the way we do our IO resource renumbering. The code somewhat deals with
- * it for 64 bits but I would expect problems on 32 bits.
- *
- * - Some 32 bits platforms such as 4xx can have physical space larger than
- * 32 bits so we need to use 64 bits values for the parsing
- */
-void pci_process_bridge_OF_ranges(struct pci_controller *hose,
- struct device_node *dev, int primary)
-{
- const u32 *ranges;
- int rlen;
- int pna = of_n_addr_cells(dev);
- int np = pna + 5;
- int memno = 0, isa_hole = -1;
- u32 pci_space;
- unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
- unsigned long long isa_mb = 0;
- struct resource *res;
-
- printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
- dev->full_name, primary ? "(primary)" : "");
-
- /* Get ranges property */
- ranges = of_get_property(dev, "ranges", &rlen);
- if (ranges == NULL)
- return;
-
- /* Parse it */
- while ((rlen -= np * 4) >= 0) {
- /* Read next ranges element */
- pci_space = ranges[0];
- pci_addr = of_read_number(ranges + 1, 2);
- cpu_addr = of_translate_address(dev, ranges + 3);
- size = of_read_number(ranges + pna + 3, 2);
- ranges += np;
-
- /* If we failed translation or got a zero-sized region
- * (some FW try to feed us with non sensical zero sized regions
- * such as power3 which look like some kind of attempt at exposing
- * the VGA memory hole)
- */
- if (cpu_addr == OF_BAD_ADDR || size == 0)
- continue;
-
- /* Now consume following elements while they are contiguous */
- for (; rlen >= np * sizeof(u32);
- ranges += np, rlen -= np * 4) {
- if (ranges[0] != pci_space)
- break;
- pci_next = of_read_number(ranges + 1, 2);
- cpu_next = of_translate_address(dev, ranges + 3);
- if (pci_next != pci_addr + size ||
- cpu_next != cpu_addr + size)
- break;
- size += of_read_number(ranges + pna + 3, 2);
- }
-
- /* Act based on address space type */
- res = NULL;
- switch ((pci_space >> 24) & 0x3) {
- case 1: /* PCI IO space */
- printk(KERN_INFO
- " IO 0x%016llx..0x%016llx -> 0x%016llx\n",
- cpu_addr, cpu_addr + size - 1, pci_addr);
-
- /* We support only one IO range */
- if (hose->pci_io_size) {
- printk(KERN_INFO
- " \\--> Skipped (too many) !\n");
- continue;
- }
-#ifdef CONFIG_PPC32
- /* On 32 bits, limit I/O space to 16MB */
- if (size > 0x01000000)
- size = 0x01000000;
-
- /* 32 bits needs to map IOs here */
- hose->io_base_virt = ioremap(cpu_addr, size);
-
- /* Expect trouble if pci_addr is not 0 */
- if (primary)
- isa_io_base =
- (unsigned long)hose->io_base_virt;
-#endif /* CONFIG_PPC32 */
- /* pci_io_size and io_base_phys always represent IO
- * space starting at 0 so we factor in pci_addr
- */
- hose->pci_io_size = pci_addr + size;
- hose->io_base_phys = cpu_addr - pci_addr;
-
- /* Build resource */
- res = &hose->io_resource;
- res->flags = IORESOURCE_IO;
- res->start = pci_addr;
- break;
- case 2: /* PCI Memory space */
- case 3: /* PCI 64 bits Memory space */
- printk(KERN_INFO
- " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
- cpu_addr, cpu_addr + size - 1, pci_addr,
- (pci_space & 0x40000000) ? "Prefetch" : "");
-
- /* We support only 3 memory ranges */
- if (memno >= 3) {
- printk(KERN_INFO
- " \\--> Skipped (too many) !\n");
- continue;
- }
- /* Handles ISA memory hole space here */
- if (pci_addr == 0) {
- isa_mb = cpu_addr;
- isa_hole = memno;
- if (primary || isa_mem_base == 0)
- isa_mem_base = cpu_addr;
- hose->isa_mem_phys = cpu_addr;
- hose->isa_mem_size = size;
- }
-
- /* We get the PCI/Mem offset from the first range or
- * the, current one if the offset came from an ISA
- * hole. If they don't match, bugger.
- */
- if (memno == 0 ||
- (isa_hole >= 0 && pci_addr != 0 &&
- hose->pci_mem_offset == isa_mb))
- hose->pci_mem_offset = cpu_addr - pci_addr;
- else if (pci_addr != 0 &&
- hose->pci_mem_offset != cpu_addr - pci_addr) {
- printk(KERN_INFO
- " \\--> Skipped (offset mismatch) !\n");
- continue;
- }
-
- /* Build resource */
- res = &hose->mem_resources[memno++];
- res->flags = IORESOURCE_MEM;
- if (pci_space & 0x40000000)
- res->flags |= IORESOURCE_PREFETCH;
- res->start = cpu_addr;
- break;
- }
- if (res != NULL) {
- res->name = dev->full_name;
- res->end = res->start + size - 1;
- res->parent = NULL;
- res->sibling = NULL;
- res->child = NULL;
- }
- }
-
- /* If there's an ISA hole and the pci_mem_offset is -not- matching
- * the ISA hole offset, then we need to remove the ISA hole from
- * the resource list for that brige
- */
- if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
- unsigned int next = isa_hole + 1;
- printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
- if (next < memno)
- memmove(&hose->mem_resources[isa_hole],
- &hose->mem_resources[next],
- sizeof(struct resource) * (memno - next));
- hose->mem_resources[--memno].flags = 0;
- }
-}
-
/* Decide whether to display the domain number in /proc */
int pci_proc_domain(struct pci_bus *bus)
{
@@ -4,6 +4,10 @@
#include <linux/of_pci.h>
#include <asm/prom.h>
+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64) || defined(CONFIG_MICROBLAZE)
+#include <asm/pci-bridge.h>
+#endif
+
static inline int __of_pci_pci_compare(struct device_node *node,
unsigned int devfn)
{
@@ -40,3 +44,199 @@ struct device_node *of_pci_find_child_device(struct device_node *parent,
return NULL;
}
EXPORT_SYMBOL_GPL(of_pci_find_child_device);
+
+/**
+ * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
+ * @hose: newly allocated pci_controller to be setup
+ * @dev: device node of the host bridge
+ * @primary: set if primary bus (32 bits only, soon to be deprecated)
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping of a pci controller based on its
+ * content.
+ *
+ * Life would be boring if it wasn't for a few issues that we have to deal
+ * with here:
+ *
+ * - We can only cope with one IO space range and up to 3 Memory space
+ * ranges. However, some machines (thanks Apple !) tend to split their
+ * space into lots of small contiguous ranges. So we have to coalesce.
+ *
+ * - We can only cope with all memory ranges having the same offset
+ * between CPU addresses and PCI addresses. Unfortunately, some bridges
+ * are setup for a large 1:1 mapping along with a small "window" which
+ * maps PCI address 0 to some arbitrary high address of the CPU space in
+ * order to give access to the ISA memory hole.
+ * The way out of here that I've chosen for now is to always set the
+ * offset based on the first resource found, then override it if we
+ * have a different offset and the previous was set by an ISA hole.
+ *
+ * - Some busses have IO space not starting at 0, which causes trouble with
+ * the way we do our IO resource renumbering. The code somewhat deals with
+ * it for 64 bits but I would expect problems on 32 bits.
+ *
+ * - Some 32 bits platforms such as 4xx can have physical space larger than
+ * 32 bits so we need to use 64 bits values for the parsing
+ */
+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64) || defined(CONFIG_MICROBLAZE)
+void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+ struct device_node *dev, int primary)
+{
+ const u32 *ranges;
+ int rlen;
+ int pna = of_n_addr_cells(dev);
+ int np = pna + 5;
+ int memno = 0, isa_hole = -1;
+ u32 pci_space;
+ unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
+ unsigned long long isa_mb = 0;
+ struct resource *res;
+
+ pr_info("PCI host bridge %s %s ranges:\n",
+ dev->full_name, primary ? "(primary)" : "");
+
+ /* Get ranges property */
+ ranges = of_get_property(dev, "ranges", &rlen);
+ if (ranges == NULL)
+ return;
+
+ /* Parse it */
+ pr_debug("Parsing ranges property...\n");
+ while ((rlen -= np * 4) >= 0) {
+ /* Read next ranges element */
+ pci_space = ranges[0];
+ pci_addr = of_read_number(ranges + 1, 2);
+ cpu_addr = of_translate_address(dev, ranges + 3);
+ size = of_read_number(ranges + pna + 3, 2);
+
+ pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
+ pci_space, pci_addr);
+ pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
+ cpu_addr, size);
+
+ ranges += np;
+
+ /* If we failed translation or got a zero-sized region
+ * (some FW try to feed us with non sensical zero sized regions
+ * such as power3 which look like some kind of attempt
+ * at exposing the VGA memory hole)
+ */
+ if (cpu_addr == OF_BAD_ADDR || size == 0)
+ continue;
+
+ /* Now consume following elements while they are contiguous */
+ for (; rlen >= np * sizeof(u32);
+ ranges += np, rlen -= np * 4) {
+ if (ranges[0] != pci_space)
+ break;
+ pci_next = of_read_number(ranges + 1, 2);
+ cpu_next = of_translate_address(dev, ranges + 3);
+ if (pci_next != pci_addr + size ||
+ cpu_next != cpu_addr + size)
+ break;
+ size += of_read_number(ranges + pna + 3, 2);
+ }
+
+ /* Act based on address space type */
+ res = NULL;
+ switch ((pci_space >> 24) & 0x3) {
+ case 1: /* PCI IO space */
+ pr_info(" IO 0x%016llx..0x%016llx -> 0x%016llx\n",
+ cpu_addr, cpu_addr + size - 1, pci_addr);
+
+ /* We support only one IO range */
+ if (hose->pci_io_size) {
+ pr_info(" \\--> Skipped (too many) !\n");
+ continue;
+ }
+#if (!IS_ENABLED(CONFIG_64BIT))
+ /* On 32 bits, limit I/O space to 16MB */
+ if (size > 0x01000000)
+ size = 0x01000000;
+
+ /* 32 bits needs to map IOs here */
+ hose->io_base_virt = ioremap(cpu_addr, size);
+
+ /* Expect trouble if pci_addr is not 0 */
+ if (primary)
+ isa_io_base =
+ (unsigned long)hose->io_base_virt;
+#endif /* !CONFIG_64BIT */
+ /* pci_io_size and io_base_phys always represent IO
+ * space starting at 0 so we factor in pci_addr
+ */
+ hose->pci_io_size = pci_addr + size;
+ hose->io_base_phys = cpu_addr - pci_addr;
+
+ /* Build resource */
+ res = &hose->io_resource;
+ res->flags = IORESOURCE_IO;
+ res->start = pci_addr;
+ break;
+ case 2: /* PCI Memory space */
+ case 3: /* PCI 64 bits Memory space */
+ pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
+ cpu_addr, cpu_addr + size - 1, pci_addr,
+ (pci_space & 0x40000000) ? "Prefetch" : "");
+
+ /* We support only 3 memory ranges */
+ if (memno >= 3) {
+ pr_info(" \\--> Skipped (too many) !\n");
+ continue;
+ }
+ /* Handles ISA memory hole space here */
+ if (pci_addr == 0) {
+ isa_mb = cpu_addr;
+ isa_hole = memno;
+ if (primary || isa_mem_base == 0)
+ isa_mem_base = cpu_addr;
+ hose->isa_mem_phys = cpu_addr;
+ hose->isa_mem_size = size;
+ }
+
+ /* We get the PCI/Mem offset from the first range or
+ * the, current one if the offset came from an ISA
+ * hole. If they don't match, bugger.
+ */
+ if (memno == 0 ||
+ (isa_hole >= 0 && pci_addr != 0 &&
+ hose->pci_mem_offset == isa_mb))
+ hose->pci_mem_offset = cpu_addr - pci_addr;
+ else if (pci_addr != 0 &&
+ hose->pci_mem_offset != cpu_addr - pci_addr) {
+ pr_info(" \\--> Skipped (offset mismatch) !\n");
+ continue;
+ }
+
+ /* Build resource */
+ res = &hose->mem_resources[memno++];
+ res->flags = IORESOURCE_MEM;
+ if (pci_space & 0x40000000)
+ res->flags |= IORESOURCE_PREFETCH;
+ res->start = cpu_addr;
+ break;
+ }
+ if (res != NULL) {
+ res->name = dev->full_name;
+ res->end = res->start + size - 1;
+ res->parent = NULL;
+ res->sibling = NULL;
+ res->child = NULL;
+ }
+ }
+
+ /* If there's an ISA hole and the pci_mem_offset is -not- matching
+ * the ISA hole offset, then we need to remove the ISA hole from
+ * the resource list for that brige
+ */
+ if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+ unsigned int next = isa_hole + 1;
+ pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb);
+ if (next < memno)
+ memmove(&hose->mem_resources[isa_hole],
+ &hose->mem_resources[next],
+ sizeof(struct resource) * (memno - next));
+ hose->mem_resources[--memno].flags = 0;
+ }
+}
+#endif
@@ -11,4 +11,8 @@ struct device_node;
struct device_node *of_pci_find_child_device(struct device_node *parent,
unsigned int devfn);
+struct pci_controller;
+void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+ struct device_node *dev, int primary);
+
#endif