@@ -18,6 +18,19 @@
model = "KZM-A9-GT";
compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd_dvfs>;
+ operating-points = <
+ /* kHz uV */
+ 1196000 1315000
+ 598000 1175000
+ 398667 1065000
+ >;
+ voltage-tolerance = <1>; /* 1% */
+ };
+ };
+
chosen {
bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
};
@@ -59,6 +72,79 @@
};
};
+&i2c0 {
+ as3711@40 {
+ compatible = "ams,as3711";
+ reg = <0x40>;
+
+ regulators {
+ vdd_dvfs: sd1 {
+ regulator-name = "1.315V CPU";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sd2 {
+ regulator-name = "1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sd4 {
+ regulator-name = "1.215V";
+ regulator-min-microvolt = <1215000>;
+ regulator-max-microvolt = <1235000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo2 {
+ regulator-name = "2.8V CPU";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo3 {
+ regulator-name = "3.0V CPU";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo4 {
+ regulator-name = "2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo5 {
+ regulator-name = "2.8V #2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo7 {
+ regulator-name = "1.15V CPU";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo8 {
+ regulator-name = "1.15V CPU #2";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
&mmcif {
bus-width = <8>;
vmmc-supply = <®_1p8v>;
This adds DT bindings for an AS3711 PMIC, used for supplying power to the CPU, some peripherals and the backlight, as well as extends the cpu0 DT node with OPPs and a reference to the PMIC to support the CPUFreq and CPU DVFS functions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> --- v5: make the sd1 regulator immediately suitable for CPUFreq instead of postponing it to an incremental patch. arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 86 ++++++++++++++++++++++++++ 1 files changed, 86 insertions(+), 0 deletions(-)