| Message ID | 1367247053-17105-5-git-send-email-rahul.sharma@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Apr 29, 2013 at 10:50 AM, Rahul Sharma <rahul.sharma@samsung.com> wrote: > Hdmiphy clock flows from hdmiphy hw to hdmi ip and mixer. It is commonly > accessed among hdmi and hdmiphy driver. During power cycle, each of these > driver decrements the ref-count and ensures that last user disables the > clock. Setting parrent device to none ensure that both the drivers gets > access to the clock. > This seems like the wrong solution. I think you should be trying to isolate its usage to one driver, instead of removing devname. Sean > Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> > --- > arch/arm/mach-exynos/clock-exynos4.c | 1 - > arch/arm/mach-exynos/clock-exynos5.c | 1 - > 2 files changed, 2 deletions(-) > > diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c > index 8a8468d..a43afcd 100644 > --- a/arch/arm/mach-exynos/clock-exynos4.c > +++ b/arch/arm/mach-exynos/clock-exynos4.c > @@ -562,7 +562,6 @@ static struct clk exynos4_init_clocks_off[] = { > .ctrlbit = (1 << 3), > }, { > .name = "hdmiphy", > - .devname = "exynos4-hdmi", > .enable = exynos4_clk_hdmiphy_ctrl, > .ctrlbit = (1 << 0), > }, { > diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c > index b0ea31f..4f39027 100644 > --- a/arch/arm/mach-exynos/clock-exynos5.c > +++ b/arch/arm/mach-exynos/clock-exynos5.c > @@ -690,7 +690,6 @@ static struct clk exynos5_init_clocks_off[] = { > .ctrlbit = (1 << 6), > }, { > .name = "hdmiphy", > - .devname = "exynos5-hdmi", > .enable = exynos5_clk_hdmiphy_ctrl, > .ctrlbit = (1 << 0), > }, { > -- > 1.7.10.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 04/29/2013 07:04 PM, Sean Paul wrote: > On Mon, Apr 29, 2013 at 10:50 AM, Rahul Sharma <rahul.sharma@samsung.com> wrote: >> Hdmiphy clock flows from hdmiphy hw to hdmi ip and mixer. It is commonly >> accessed among hdmi and hdmiphy driver. During power cycle, each of these >> driver decrements the ref-count and ensures that last user disables the >> clock. Setting parrent device to none ensure that both the drivers gets >> access to the clock. >> > > This seems like the wrong solution. I think you should be trying to > isolate its usage to one driver, instead of removing devname. And files: arch/arm/mach-exynos/clock-exynos4.c arch/arm/mach-exynos/clock-exynos5.c are not existent in linux-next for some time already. Since 3.10 the common clock API driver is used. It also shows that very few people actually test their patches against -next... :( Regards, Sylwester > Sean > >> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> >> --- >> arch/arm/mach-exynos/clock-exynos4.c | 1 - >> arch/arm/mach-exynos/clock-exynos5.c | 1 - >> 2 files changed, 2 deletions(-) >> >> diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c >> index 8a8468d..a43afcd 100644 >> --- a/arch/arm/mach-exynos/clock-exynos4.c >> +++ b/arch/arm/mach-exynos/clock-exynos4.c >> @@ -562,7 +562,6 @@ static struct clk exynos4_init_clocks_off[] = { >> .ctrlbit = (1 << 3), >> }, { >> .name = "hdmiphy", >> - .devname = "exynos4-hdmi", >> .enable = exynos4_clk_hdmiphy_ctrl, >> .ctrlbit = (1 << 0), >> }, { >> diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c >> index b0ea31f..4f39027 100644 >> --- a/arch/arm/mach-exynos/clock-exynos5.c >> +++ b/arch/arm/mach-exynos/clock-exynos5.c >> @@ -690,7 +690,6 @@ static struct clk exynos5_init_clocks_off[] = { >> .ctrlbit = (1 << 6), >> }, { >> .name = "hdmiphy", >> - .devname = "exynos5-hdmi", >> .enable = exynos5_clk_hdmiphy_ctrl, >> .ctrlbit = (1 << 0), >> }, { >> -- >> 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Apr 29, 2013 at 11:07 PM, Sylwester Nawrocki <s.nawrocki@samsung.com> wrote: > Hi, > > On 04/29/2013 07:04 PM, Sean Paul wrote: >> On Mon, Apr 29, 2013 at 10:50 AM, Rahul Sharma <rahul.sharma@samsung.com> wrote: >>> Hdmiphy clock flows from hdmiphy hw to hdmi ip and mixer. It is commonly >>> accessed among hdmi and hdmiphy driver. During power cycle, each of these >>> driver decrements the ref-count and ensures that last user disables the >>> clock. Setting parrent device to none ensure that both the drivers gets >>> access to the clock. >>> >> >> This seems like the wrong solution. I think you should be trying to >> isolate its usage to one driver, instead of removing devname. > > And files: > arch/arm/mach-exynos/clock-exynos4.c > arch/arm/mach-exynos/clock-exynos5.c > > are not existent in linux-next for some time already. Since 3.10 the > common clock API driver is used. It also shows that very few people > actually test their patches against -next... :( > > Regards, > Sylwester > >> Sean >> Thanks Sean, Sylwester, I will rebase drm hdmi driver to pinctrl, CCF and then post this series with suggested rework. regards, Rahul Sharma. >>> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> >>> --- >>> arch/arm/mach-exynos/clock-exynos4.c | 1 - >>> arch/arm/mach-exynos/clock-exynos5.c | 1 - >>> 2 files changed, 2 deletions(-) >>> >>> diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c >>> index 8a8468d..a43afcd 100644 >>> --- a/arch/arm/mach-exynos/clock-exynos4.c >>> +++ b/arch/arm/mach-exynos/clock-exynos4.c >>> @@ -562,7 +562,6 @@ static struct clk exynos4_init_clocks_off[] = { >>> .ctrlbit = (1 << 3), >>> }, { >>> .name = "hdmiphy", >>> - .devname = "exynos4-hdmi", >>> .enable = exynos4_clk_hdmiphy_ctrl, >>> .ctrlbit = (1 << 0), >>> }, { >>> diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c >>> index b0ea31f..4f39027 100644 >>> --- a/arch/arm/mach-exynos/clock-exynos5.c >>> +++ b/arch/arm/mach-exynos/clock-exynos5.c >>> @@ -690,7 +690,6 @@ static struct clk exynos5_init_clocks_off[] = { >>> .ctrlbit = (1 << 6), >>> }, { >>> .name = "hdmiphy", >>> - .devname = "exynos5-hdmi", >>> .enable = exynos5_clk_hdmiphy_ctrl, >>> .ctrlbit = (1 << 0), >>> }, { >>> -- >>> 1.7.10.4 >
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index 8a8468d..a43afcd 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -562,7 +562,6 @@ static struct clk exynos4_init_clocks_off[] = { .ctrlbit = (1 << 3), }, { .name = "hdmiphy", - .devname = "exynos4-hdmi", .enable = exynos4_clk_hdmiphy_ctrl, .ctrlbit = (1 << 0), }, { diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index b0ea31f..4f39027 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -690,7 +690,6 @@ static struct clk exynos5_init_clocks_off[] = { .ctrlbit = (1 << 6), }, { .name = "hdmiphy", - .devname = "exynos5-hdmi", .enable = exynos5_clk_hdmiphy_ctrl, .ctrlbit = (1 << 0), }, {
Hdmiphy clock flows from hdmiphy hw to hdmi ip and mixer. It is commonly accessed among hdmi and hdmiphy driver. During power cycle, each of these driver decrements the ref-count and ensures that last user disables the clock. Setting parrent device to none ensure that both the drivers gets access to the clock. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> --- arch/arm/mach-exynos/clock-exynos4.c | 1 - arch/arm/mach-exynos/clock-exynos5.c | 1 - 2 files changed, 2 deletions(-)