diff mbox

[v5] pinctrl: Add pinctrl-s3c24xx driver

Message ID 201305031552.45410.heiko@sntech.de (mailing list archive)
State New, archived
Headers show

Commit Message

Heiko Stuebner May 3, 2013, 1:52 p.m. UTC
The s3c24xx pins follow a similar pattern as the other Samsung SoCs and
can therefore reuse the already introduced infrastructure.

The s3c24xx SoCs have one design oddity in that the first 4 external
interrupts do not reside in the eint pending register but in the main
interrupt controller instead. We solve this by forwarding the external
interrupt from the main controller into the irq domain of the pin bank.
The masking/acking of these interrupts is handled in the same way.

Furthermore the S3C2412/2413 SoCs contain another oddity in that they
keep the same 4 eints in the main interrupt controller and eintpend
register and requiring ack operations to happen in both. This is solved
by using different compatible properties for the wakeup eint node which
set a property accordingly.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
changes since v4:
- fix wrong s3c2413 naming
  between s3c2412 and s3c2413, the s3c2412 is the base type. Till v4 the
  naming was mixed up, with parts being labeled as s3c2412* and others
  as s3c2413*. Fix this by renaming the s3c2413* parts to s3c2412.
  No functional changes.

changes since v3:
- address comments from Sylwester Nawrocki:
  (typos, wrong comments, etc)

changes since v2:
- address more comments from Tomasz Figa:
  * remove obsolete ctrl_type references
  * remove redundant check for parent_chip
  * update docs and commit message

changes since v1:
- address comments from Tomasz Figa:
  * split handling functions for eints 0-3 for s3c2412 and all others
  * change the handling for s3c2412 eints 0-3 in that they now use
    chained_irq_* for the outer parent interrupt

 .../bindings/pinctrl/samsung-pinctrl.txt           |    8 +
 drivers/gpio/gpio-samsung.c                        |    4 +
 drivers/pinctrl/Kconfig                            |    5 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-s3c24xx.c                  |  652 ++++++++++++++++++++
 drivers/pinctrl/pinctrl-samsung.c                  |   10 +
 drivers/pinctrl/pinctrl-samsung.h                  |    4 +
 7 files changed, 684 insertions(+), 0 deletions(-)
 create mode 100644 drivers/pinctrl/pinctrl-s3c24xx.c

Comments

Kim Kukjin May 10, 2013, 12:32 a.m. UTC | #1
Heiko Stübner wrote:
> 
> The s3c24xx pins follow a similar pattern as the other Samsung SoCs and
> can therefore reuse the already introduced infrastructure.
> 
> The s3c24xx SoCs have one design oddity in that the first 4 external
> interrupts do not reside in the eint pending register but in the main
> interrupt controller instead. We solve this by forwarding the external
> interrupt from the main controller into the irq domain of the pin bank.
> The masking/acking of these interrupts is handled in the same way.
> 
> Furthermore the S3C2412/2413 SoCs contain another oddity in that they
> keep the same 4 eints in the main interrupt controller and eintpend
> register and requiring ack operations to happen in both. This is solved
> by using different compatible properties for the wakeup eint node which
> set a property accordingly.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>

Looks good to me.

Linus, if you want me to take into samsung tree, please let me know.

Thanks.

- Kukjin

> ---
> changes since v4:
> - fix wrong s3c2413 naming
>   between s3c2412 and s3c2413, the s3c2412 is the base type. Till v4 the
>   naming was mixed up, with parts being labeled as s3c2412* and others
>   as s3c2413*. Fix this by renaming the s3c2413* parts to s3c2412.
>   No functional changes.
> 
> changes since v3:
> - address comments from Sylwester Nawrocki:
>   (typos, wrong comments, etc)
> 
> changes since v2:
> - address more comments from Tomasz Figa:
>   * remove obsolete ctrl_type references
>   * remove redundant check for parent_chip
>   * update docs and commit message
> 
> changes since v1:
> - address comments from Tomasz Figa:
>   * split handling functions for eints 0-3 for s3c2412 and all others
>   * change the handling for s3c2412 eints 0-3 in that they now use
>     chained_irq_* for the outer parent interrupt
> 
>  .../bindings/pinctrl/samsung-pinctrl.txt           |    8 +
>  drivers/gpio/gpio-samsung.c                        |    4 +
>  drivers/pinctrl/Kconfig                            |    5 +
>  drivers/pinctrl/Makefile                           |    1 +
>  drivers/pinctrl/pinctrl-s3c24xx.c                  |  652 ++++++++++++++++++++
>  drivers/pinctrl/pinctrl-samsung.c                  |   10 +
>  drivers/pinctrl/pinctrl-samsung.h                  |    4 +
>  7 files changed, 684 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/pinctrl/pinctrl-s3c24xx.c
> 
[...]

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Heiko Stuebner May 11, 2013, 3:26 p.m. UTC | #2
Am Freitag, 10. Mai 2013, 02:32:05 schrieb Kukjin Kim:
> Heiko Stübner wrote:
> > The s3c24xx pins follow a similar pattern as the other Samsung SoCs and
> > can therefore reuse the already introduced infrastructure.
> > 
> > The s3c24xx SoCs have one design oddity in that the first 4 external
> > interrupts do not reside in the eint pending register but in the main
> > interrupt controller instead. We solve this by forwarding the external
> > interrupt from the main controller into the irq domain of the pin bank.
> > The masking/acking of these interrupts is handled in the same way.
> > 
> > Furthermore the S3C2412/2413 SoCs contain another oddity in that they
> > keep the same 4 eints in the main interrupt controller and eintpend
> > register and requiring ack operations to happen in both. This is solved
> > by using different compatible properties for the wakeup eint node which
> > set a property accordingly.
> > 
> > Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> > Reviewed-by: Tomasz Figa <t.figa@samsung.com>
> > Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> > Acked-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Looks good to me.
> 
> Linus, if you want me to take into samsung tree, please let me know.

in v4 Linus said:

"Are you taking this through the Samsung tree?"

This would also enable me to put the s3c2416 devicetree support on top of it 
in this cycle, which of course needs the pinctrl driver.


Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kim Kukjin May 11, 2013, 3:28 p.m. UTC | #3
Heiko Stübner wrote:
> 
> Am Freitag, 10. Mai 2013, 02:32:05 schrieb Kukjin Kim:
> > Heiko Stübner wrote:
> > > The s3c24xx pins follow a similar pattern as the other Samsung SoCs
> and
> > > can therefore reuse the already introduced infrastructure.
> > >
> > > The s3c24xx SoCs have one design oddity in that the first 4 external
> > > interrupts do not reside in the eint pending register but in the main
> > > interrupt controller instead. We solve this by forwarding the external
> > > interrupt from the main controller into the irq domain of the pin bank.
> > > The masking/acking of these interrupts is handled in the same way.
> > >
> > > Furthermore the S3C2412/2413 SoCs contain another oddity in that they
> > > keep the same 4 eints in the main interrupt controller and eintpend
> > > register and requiring ack operations to happen in both. This is
> solved
> > > by using different compatible properties for the wakeup eint node
> which
> > > set a property accordingly.
> > >
> > > Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> > > Reviewed-by: Tomasz Figa <t.figa@samsung.com>
> > > Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> > > Acked-by: Linus Walleij <linus.walleij@linaro.org>
> >
> > Looks good to me.
> >
> > Linus, if you want me to take into samsung tree, please let me know.
> 
> in v4 Linus said:
> 
> "Are you taking this through the Samsung tree?"
> 
> This would also enable me to put the s3c2416 devicetree support on top of
> it
> in this cycle, which of course needs the pinctrl driver.
> 
OK, will apply into samsung tree.

Thanks.

- Kukjin

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index c70fca1..dc50c7e 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -7,6 +7,10 @@  on-chip controllers onto these pads.
 
 Required Properties:
 - compatible: should be one of the following.
+  - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller,
+  - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller,
+  - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller,
+  - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller,
   - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
   - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
   - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
@@ -106,6 +110,10 @@  B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
 
    - compatible: identifies the type of the external wakeup interrupt controller
      The possible values are:
+     - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
+     - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung S3C2412 and S3C2413 SoCs,
      - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
        found on Samsung S3C64xx SoCs,
      - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index dc06a6f..73017b9 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -3026,6 +3026,10 @@  static __init int samsung_gpiolib_init(void)
 	*/
 	struct device_node *pctrl_np;
 	static const struct of_device_id exynos_pinctrl_ids[] = {
+		{ .compatible = "samsung,s3c2412-pinctrl", },
+		{ .compatible = "samsung,s3c2416-pinctrl", },
+		{ .compatible = "samsung,s3c2440-pinctrl", },
+		{ .compatible = "samsung,s3c2450-pinctrl", },
 		{ .compatible = "samsung,s3c64xx-pinctrl", },
 		{ .compatible = "samsung,exynos4210-pinctrl", },
 		{ .compatible = "samsung,exynos4x12-pinctrl", },
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 7402ac9..58d73ac 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -226,6 +226,11 @@  config PINCTRL_EXYNOS5440
 	select PINMUX
 	select PINCONF
 
+config PINCTRL_S3C24XX
+	bool "Samsung S3C24XX SoC pinctrl driver"
+	depends on ARCH_S3C24XX
+	select PINCTRL_SAMSUNG
+
 config PINCTRL_S3C64XX
 	bool "Samsung S3C64XX SoC pinctrl driver"
 	depends on ARCH_S3C64XX
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 21d34c2..1ccdfd8 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -45,6 +45,7 @@  obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_SAMSUNG)	+= pinctrl-samsung.o
 obj-$(CONFIG_PINCTRL_EXYNOS)	+= pinctrl-exynos.o
 obj-$(CONFIG_PINCTRL_EXYNOS5440)	+= pinctrl-exynos5440.o
+obj-$(CONFIG_PINCTRL_S3C24XX)	+= pinctrl-s3c24xx.o
 obj-$(CONFIG_PINCTRL_S3C64XX)	+= pinctrl-s3c64xx.o
 obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
diff --git a/drivers/pinctrl/pinctrl-s3c24xx.c b/drivers/pinctrl/pinctrl-s3c24xx.c
new file mode 100644
index 0000000..efd0908
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-s3c24xx.c
@@ -0,0 +1,652 @@ 
+/*
+ * S3C24XX specific support for Samsung pinctrl/gpiolib driver.
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This file contains the SamsungS3C24XX specific information required by the
+ * Samsung pinctrl/gpiolib driver. It also includes the implementation of
+ * external gpio and wakeup interrupt support.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <asm/mach/irq.h>
+
+#include "pinctrl-samsung.h"
+
+#define NUM_EINT	24
+#define NUM_EINT_IRQ	6
+#define EINT_MAX_PER_GROUP	8
+
+#define EINTPEND_REG	0xa8
+#define EINTMASK_REG	0xa4
+
+#define EINT_GROUP(i)		((int)((i) / EINT_MAX_PER_GROUP))
+#define EINT_REG(i)		((EINT_GROUP(i) * 4) + 0x88)
+#define EINT_OFFS(i)		((i) % EINT_MAX_PER_GROUP * 4)
+
+#define EINT_LEVEL_LOW		0
+#define EINT_LEVEL_HIGH		1
+#define EINT_EDGE_FALLING	2
+#define EINT_EDGE_RISING	4
+#define EINT_EDGE_BOTH		6
+#define EINT_MASK		0xf
+
+static struct samsung_pin_bank_type bank_type_1bit = {
+	.fld_width = { 1, 1, },
+	.reg_offset = { 0x00, 0x04, },
+};
+
+static struct samsung_pin_bank_type bank_type_2bit = {
+	.fld_width = { 2, 1, 2, },
+	.reg_offset = { 0x00, 0x04, 0x08, },
+};
+
+#define PIN_BANK_A(pins, reg, id)		\
+	{						\
+		.type		= &bank_type_1bit,	\
+		.pctl_offset	= reg,			\
+		.nr_pins	= pins,			\
+		.eint_type	= EINT_TYPE_NONE,	\
+		.name		= id			\
+	}
+
+#define PIN_BANK_2BIT(pins, reg, id)		\
+	{						\
+		.type		= &bank_type_2bit,	\
+		.pctl_offset	= reg,			\
+		.nr_pins	= pins,			\
+		.eint_type	= EINT_TYPE_NONE,	\
+		.name		= id			\
+	}
+
+#define PIN_BANK_2BIT_EINTW(pins, reg, id, eoffs, emask)\
+	{						\
+		.type		= &bank_type_2bit,	\
+		.pctl_offset	= reg,			\
+		.nr_pins	= pins,			\
+		.eint_type	= EINT_TYPE_WKUP,	\
+		.eint_func	= 2,			\
+		.eint_mask	= emask,		\
+		.eint_offset	= eoffs,		\
+		.name		= id			\
+	}
+
+/**
+ * struct s3c24xx_eint_data: EINT common data
+ * @drvdata: pin controller driver data
+ * @domains: IRQ domains of particular EINT interrupts
+ * @parents: mapped parent irqs in the main interrupt controller
+ */
+struct s3c24xx_eint_data {
+	struct samsung_pinctrl_drv_data *drvdata;
+	struct irq_domain *domains[NUM_EINT];
+	int parents[NUM_EINT_IRQ];
+};
+
+/**
+ * struct s3c24xx_eint_domain_data: per irq-domain data
+ * @bank: pin bank related to the domain
+ * @eint_data: common data
+ * eint0_3_parent_only: live eints 0-3 only in the main intc
+ */
+struct s3c24xx_eint_domain_data {
+	struct samsung_pin_bank *bank;
+	struct s3c24xx_eint_data *eint_data;
+	bool eint0_3_parent_only;
+};
+
+static int s3c24xx_eint_get_trigger(unsigned int type)
+{
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		return EINT_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		return EINT_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		return EINT_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		return EINT_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		return EINT_LEVEL_LOW;
+		break;
+	default:
+		return -EINVAL;
+	}
+}
+
+static void s3c24xx_eint_set_handler(unsigned int irq, unsigned int type)
+{
+	/* Edge- and level-triggered interrupts need different handlers */
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		__irq_set_handler_locked(irq, handle_edge_irq);
+	else
+		__irq_set_handler_locked(irq, handle_level_irq);
+}
+
+static void s3c24xx_eint_set_function(struct samsung_pinctrl_drv_data *d,
+					struct samsung_pin_bank *bank, int pin)
+{
+	struct samsung_pin_bank_type *bank_type = bank->type;
+	unsigned long flags;
+	void __iomem *reg;
+	u8 shift;
+	u32 mask;
+	u32 val;
+
+	/* Make sure that pin is configured as interrupt */
+	reg = d->virt_base + bank->pctl_offset;
+	shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC];
+	mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
+
+	spin_lock_irqsave(&bank->slock, flags);
+
+	val = readl(reg);
+	val &= ~(mask << shift);
+	val |= bank->eint_func << shift;
+	writel(val, reg);
+
+	spin_unlock_irqrestore(&bank->slock, flags);
+}
+
+static int s3c24xx_eint_type(struct irq_data *data, unsigned int type)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	int index = bank->eint_offset + data->hwirq;
+	void __iomem *reg;
+	int trigger;
+	u8 shift;
+	u32 val;
+
+	trigger = s3c24xx_eint_get_trigger(type);
+	if (trigger < 0) {
+		dev_err(d->dev, "unsupported external interrupt type\n");
+		return -EINVAL;
+	}
+
+	s3c24xx_eint_set_handler(data->irq, type);
+
+	/* Set up interrupt trigger */
+	reg = d->virt_base + EINT_REG(index);
+	shift = EINT_OFFS(index);
+
+	val = readl(reg);
+	val &= ~(EINT_MASK << shift);
+	val |= trigger << shift;
+	writel(val, reg);
+
+	s3c24xx_eint_set_function(d, bank, data->hwirq);
+
+	return 0;
+}
+
+/* Handling of EINTs 0-3 on all except S3C2412 and S3C2413 */
+
+static void s3c2410_eint0_3_ack(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
+	struct s3c24xx_eint_data *eint_data = ddata->eint_data;
+	int parent_irq = eint_data->parents[data->hwirq];
+	struct irq_chip *parent_chip = irq_get_chip(parent_irq);
+
+	parent_chip->irq_ack(irq_get_irq_data(parent_irq));
+}
+
+static void s3c2410_eint0_3_mask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
+	struct s3c24xx_eint_data *eint_data = ddata->eint_data;
+	int parent_irq = eint_data->parents[data->hwirq];
+	struct irq_chip *parent_chip = irq_get_chip(parent_irq);
+
+	parent_chip->irq_mask(irq_get_irq_data(parent_irq));
+}
+
+static void s3c2410_eint0_3_unmask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
+	struct s3c24xx_eint_data *eint_data = ddata->eint_data;
+	int parent_irq = eint_data->parents[data->hwirq];
+	struct irq_chip *parent_chip = irq_get_chip(parent_irq);
+
+	parent_chip->irq_unmask(irq_get_irq_data(parent_irq));
+}
+
+static struct irq_chip s3c2410_eint0_3_chip = {
+	.name		= "s3c2410-eint0_3",
+	.irq_ack	= s3c2410_eint0_3_ack,
+	.irq_mask	= s3c2410_eint0_3_mask,
+	.irq_unmask	= s3c2410_eint0_3_unmask,
+	.irq_set_type	= s3c24xx_eint_type,
+};
+
+static void s3c2410_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct s3c24xx_eint_data *eint_data = irq_get_handler_data(irq);
+	unsigned int virq;
+
+	/* the first 4 eints have a simple 1 to 1 mapping */
+	virq = irq_linear_revmap(eint_data->domains[data->hwirq], data->hwirq);
+	/* Something must be really wrong if an unmapped EINT is unmasked */
+	BUG_ON(!virq);
+
+	generic_handle_irq(virq);
+}
+
+/* Handling of EINTs 0-3 on S3C2412 and S3C2413 */
+
+static void s3c2412_eint0_3_ack(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+
+	unsigned long bitval = 1UL << data->hwirq;
+	writel(bitval, d->virt_base + EINTPEND_REG);
+}
+
+static void s3c2412_eint0_3_mask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + EINTMASK_REG);
+	mask |= (1UL << data->hwirq);
+	writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static void s3c2412_eint0_3_unmask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + EINTMASK_REG);
+	mask &= ~(1UL << data->hwirq);
+	writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static struct irq_chip s3c2412_eint0_3_chip = {
+	.name		= "s3c2412-eint0_3",
+	.irq_ack	= s3c2412_eint0_3_ack,
+	.irq_mask	= s3c2412_eint0_3_mask,
+	.irq_unmask	= s3c2412_eint0_3_unmask,
+	.irq_set_type	= s3c24xx_eint_type,
+};
+
+static void s3c2412_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct s3c24xx_eint_data *eint_data = irq_get_handler_data(irq);
+	unsigned int virq;
+
+	chained_irq_enter(chip, desc);
+
+	/* the first 4 eints have a simple 1 to 1 mapping */
+	virq = irq_linear_revmap(eint_data->domains[data->hwirq], data->hwirq);
+	/* Something must be really wrong if an unmapped EINT is unmasked */
+	BUG_ON(!virq);
+
+	generic_handle_irq(virq);
+
+	chained_irq_exit(chip, desc);
+}
+
+/* Handling of all other eints */
+
+static void s3c24xx_eint_ack(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned char index = bank->eint_offset + data->hwirq;
+
+	writel(1UL << index, d->virt_base + EINTPEND_REG);
+}
+
+static void s3c24xx_eint_mask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned char index = bank->eint_offset + data->hwirq;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + EINTMASK_REG);
+	mask |= (1UL << index);
+	writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static void s3c24xx_eint_unmask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned char index = bank->eint_offset + data->hwirq;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + EINTMASK_REG);
+	mask &= ~(1UL << index);
+	writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static struct irq_chip s3c24xx_eint_chip = {
+	.name		= "s3c-eint",
+	.irq_ack	= s3c24xx_eint_ack,
+	.irq_mask	= s3c24xx_eint_mask,
+	.irq_unmask	= s3c24xx_eint_unmask,
+	.irq_set_type	= s3c24xx_eint_type,
+};
+
+static inline void s3c24xx_demux_eint(unsigned int irq, struct irq_desc *desc,
+				      u32 offset, u32 range)
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+	struct s3c24xx_eint_data *data = irq_get_handler_data(irq);
+	struct samsung_pinctrl_drv_data *d = data->drvdata;
+	unsigned int pend, mask;
+
+	chained_irq_enter(chip, desc);
+
+	pend = readl(d->virt_base + EINTPEND_REG);
+	mask = readl(d->virt_base + EINTMASK_REG);
+
+	pend &= ~mask;
+	pend &= range;
+
+	while (pend) {
+		unsigned int virq;
+
+		irq = __ffs(pend);
+		pend &= ~(1 << irq);
+		virq = irq_linear_revmap(data->domains[irq], irq - offset);
+		/* Something is really wrong if an unmapped EINT is unmasked */
+		BUG_ON(!virq);
+
+		generic_handle_irq(virq);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static void s3c24xx_demux_eint4_7(unsigned int irq, struct irq_desc *desc)
+{
+	s3c24xx_demux_eint(irq, desc, 0, 0xf0);
+}
+
+static void s3c24xx_demux_eint8_23(unsigned int irq, struct irq_desc *desc)
+{
+	s3c24xx_demux_eint(irq, desc, 8, 0xffff00);
+}
+
+static irq_flow_handler_t s3c2410_eint_handlers[NUM_EINT_IRQ] = {
+	s3c2410_demux_eint0_3,
+	s3c2410_demux_eint0_3,
+	s3c2410_demux_eint0_3,
+	s3c2410_demux_eint0_3,
+	s3c24xx_demux_eint4_7,
+	s3c24xx_demux_eint8_23,
+};
+
+static irq_flow_handler_t s3c2412_eint_handlers[NUM_EINT_IRQ] = {
+	s3c2412_demux_eint0_3,
+	s3c2412_demux_eint0_3,
+	s3c2412_demux_eint0_3,
+	s3c2412_demux_eint0_3,
+	s3c24xx_demux_eint4_7,
+	s3c24xx_demux_eint8_23,
+};
+
+static int s3c24xx_gpf_irq_map(struct irq_domain *h, unsigned int virq,
+					irq_hw_number_t hw)
+{
+	struct s3c24xx_eint_domain_data *ddata = h->host_data;
+	struct samsung_pin_bank *bank = ddata->bank;
+
+	if (!(bank->eint_mask & (1 << (bank->eint_offset + hw))))
+		return -EINVAL;
+
+	if (hw <= 3) {
+		if (ddata->eint0_3_parent_only)
+			irq_set_chip_and_handler(virq, &s3c2410_eint0_3_chip,
+						 handle_edge_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c2412_eint0_3_chip,
+						 handle_edge_irq);
+	} else {
+		irq_set_chip_and_handler(virq, &s3c24xx_eint_chip,
+					 handle_edge_irq);
+	}
+	irq_set_chip_data(virq, bank);
+	set_irq_flags(virq, IRQF_VALID);
+	return 0;
+}
+
+static const struct irq_domain_ops s3c24xx_gpf_irq_ops = {
+	.map	= s3c24xx_gpf_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static int s3c24xx_gpg_irq_map(struct irq_domain *h, unsigned int virq,
+					irq_hw_number_t hw)
+{
+	struct s3c24xx_eint_domain_data *ddata = h->host_data;
+	struct samsung_pin_bank *bank = ddata->bank;
+
+	if (!(bank->eint_mask & (1 << (bank->eint_offset + hw))))
+		return -EINVAL;
+
+	irq_set_chip_and_handler(virq, &s3c24xx_eint_chip, handle_edge_irq);
+	irq_set_chip_data(virq, bank);
+	set_irq_flags(virq, IRQF_VALID);
+	return 0;
+}
+
+static const struct irq_domain_ops s3c24xx_gpg_irq_ops = {
+	.map	= s3c24xx_gpg_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static const struct of_device_id s3c24xx_eint_irq_ids[] = {
+	{ .compatible = "samsung,s3c2410-wakeup-eint", .data = (void *)1 },
+	{ .compatible = "samsung,s3c2412-wakeup-eint", .data = (void *)0 },
+	{ }
+};
+
+static int s3c24xx_eint_init(struct samsung_pinctrl_drv_data *d)
+{
+	struct device *dev = d->dev;
+	const struct of_device_id *match;
+	struct device_node *eint_np = NULL;
+	struct device_node *np;
+	struct samsung_pin_bank *bank;
+	struct s3c24xx_eint_data *eint_data;
+	const struct irq_domain_ops *ops;
+	unsigned int i;
+	bool eint0_3_parent_only;
+	irq_flow_handler_t *handlers;
+
+	for_each_child_of_node(dev->of_node, np) {
+		match = of_match_node(s3c24xx_eint_irq_ids, np);
+		if (match) {
+			eint_np = np;
+			eint0_3_parent_only = (bool)match->data;
+			break;
+		}
+	}
+	if (!eint_np)
+		return -ENODEV;
+
+	eint_data = devm_kzalloc(dev, sizeof(*eint_data), GFP_KERNEL);
+	if (!eint_data)
+		return -ENOMEM;
+
+	eint_data->drvdata = d;
+
+	handlers = eint0_3_parent_only ? s3c2410_eint_handlers
+				       : s3c2412_eint_handlers;
+	for (i = 0; i < NUM_EINT_IRQ; ++i) {
+		unsigned int irq;
+
+		irq = irq_of_parse_and_map(eint_np, i);
+		if (!irq) {
+			dev_err(dev, "failed to get wakeup EINT IRQ %d\n", i);
+			return -ENXIO;
+		}
+
+		eint_data->parents[i] = irq;
+		irq_set_chained_handler(irq, handlers[i]);
+		irq_set_handler_data(irq, eint_data);
+	}
+
+	bank = d->ctrl->pin_banks;
+	for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
+		struct s3c24xx_eint_domain_data *ddata;
+		unsigned int mask;
+		unsigned int irq;
+		unsigned int pin;
+
+		if (bank->eint_type != EINT_TYPE_WKUP)
+			continue;
+
+		ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+		if (!ddata)
+			return -ENOMEM;
+
+		ddata->bank = bank;
+		ddata->eint_data = eint_data;
+		ddata->eint0_3_parent_only = eint0_3_parent_only;
+
+		ops = (bank->eint_offset == 0) ? &s3c24xx_gpf_irq_ops
+					       : &s3c24xx_gpg_irq_ops;
+
+		bank->irq_domain = irq_domain_add_linear(bank->of_node,
+				bank->nr_pins, ops, ddata);
+		if (!bank->irq_domain) {
+			dev_err(dev, "wkup irq domain add failed\n");
+			return -ENXIO;
+		}
+
+		irq = bank->eint_offset;
+		mask = bank->eint_mask;
+		for (pin = 0; mask; ++pin, mask >>= 1) {
+			if (irq > NUM_EINT)
+				break;
+			if (!(mask & 1))
+				continue;
+			eint_data->domains[irq] = bank->irq_domain;
+			++irq;
+		}
+	}
+
+	return 0;
+}
+
+static struct samsung_pin_bank s3c2412_pin_banks[] = {
+	PIN_BANK_A(23, 0x000, "gpa"),
+	PIN_BANK_2BIT(11, 0x010, "gpb"),
+	PIN_BANK_2BIT(16, 0x020, "gpc"),
+	PIN_BANK_2BIT(16, 0x030, "gpd"),
+	PIN_BANK_2BIT(16, 0x040, "gpe"),
+	PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+	PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
+	PIN_BANK_2BIT(11, 0x070, "gph"),
+	PIN_BANK_2BIT(13, 0x080, "gpj"),
+};
+
+struct samsung_pin_ctrl s3c2412_pin_ctrl[] = {
+	{
+		.pin_banks	= s3c2412_pin_banks,
+		.nr_banks	= ARRAY_SIZE(s3c2412_pin_banks),
+		.eint_wkup_init = s3c24xx_eint_init,
+		.label		= "S3C2412-GPIO",
+	},
+};
+
+static struct samsung_pin_bank s3c2416_pin_banks[] = {
+	PIN_BANK_A(27, 0x000, "gpa"),
+	PIN_BANK_2BIT(11, 0x010, "gpb"),
+	PIN_BANK_2BIT(16, 0x020, "gpc"),
+	PIN_BANK_2BIT(16, 0x030, "gpd"),
+	PIN_BANK_2BIT(16, 0x040, "gpe"),
+	PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+	PIN_BANK_2BIT_EINTW(8, 0x060, "gpg", 8, 0xff00),
+	PIN_BANK_2BIT(15, 0x070, "gph"),
+	PIN_BANK_2BIT(16, 0x0e0, "gpk"),
+	PIN_BANK_2BIT(14, 0x0f0, "gpl"),
+	PIN_BANK_2BIT(2, 0x100, "gpm"),
+};
+
+struct samsung_pin_ctrl s3c2416_pin_ctrl[] = {
+	{
+		.pin_banks	= s3c2416_pin_banks,
+		.nr_banks	= ARRAY_SIZE(s3c2416_pin_banks),
+		.eint_wkup_init = s3c24xx_eint_init,
+		.label		= "S3C2416-GPIO",
+	},
+};
+
+static struct samsung_pin_bank s3c2440_pin_banks[] = {
+	PIN_BANK_A(25, 0x000, "gpa"),
+	PIN_BANK_2BIT(11, 0x010, "gpb"),
+	PIN_BANK_2BIT(16, 0x020, "gpc"),
+	PIN_BANK_2BIT(16, 0x030, "gpd"),
+	PIN_BANK_2BIT(16, 0x040, "gpe"),
+	PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+	PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
+	PIN_BANK_2BIT(11, 0x070, "gph"),
+	PIN_BANK_2BIT(13, 0x0d0, "gpj"),
+};
+
+struct samsung_pin_ctrl s3c2440_pin_ctrl[] = {
+	{
+		.pin_banks	= s3c2440_pin_banks,
+		.nr_banks	= ARRAY_SIZE(s3c2440_pin_banks),
+		.eint_wkup_init = s3c24xx_eint_init,
+		.label		= "S3C2440-GPIO",
+	},
+};
+
+static struct samsung_pin_bank s3c2450_pin_banks[] = {
+	PIN_BANK_A(28, 0x000, "gpa"),
+	PIN_BANK_2BIT(11, 0x010, "gpb"),
+	PIN_BANK_2BIT(16, 0x020, "gpc"),
+	PIN_BANK_2BIT(16, 0x030, "gpd"),
+	PIN_BANK_2BIT(16, 0x040, "gpe"),
+	PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+	PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
+	PIN_BANK_2BIT(15, 0x070, "gph"),
+	PIN_BANK_2BIT(16, 0x0d0, "gpj"),
+	PIN_BANK_2BIT(16, 0x0e0, "gpk"),
+	PIN_BANK_2BIT(15, 0x0f0, "gpl"),
+	PIN_BANK_2BIT(2, 0x100, "gpm"),
+};
+
+struct samsung_pin_ctrl s3c2450_pin_ctrl[] = {
+	{
+		.pin_banks	= s3c2450_pin_banks,
+		.nr_banks	= ARRAY_SIZE(s3c2450_pin_banks),
+		.eint_wkup_init = s3c24xx_eint_init,
+		.label		= "S3C2450-GPIO",
+	},
+};
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index e836135..234c32f 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -977,6 +977,16 @@  static const struct of_device_id samsung_pinctrl_dt_match[] = {
 	{ .compatible = "samsung,s3c64xx-pinctrl",
 		.data = s3c64xx_pin_ctrl },
 #endif
+#ifdef CONFIG_PINCTRL_S3C24XX
+	{ .compatible = "samsung,s3c2412-pinctrl",
+		.data = s3c2412_pin_ctrl },
+	{ .compatible = "samsung,s3c2416-pinctrl",
+		.data = s3c2416_pin_ctrl },
+	{ .compatible = "samsung,s3c2440-pinctrl",
+		.data = s3c2440_pin_ctrl },
+	{ .compatible = "samsung,s3c2450-pinctrl",
+		.data = s3c2450_pin_ctrl },
+#endif
 	{},
 };
 MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h
index 7c7f9eb..c79d634 100644
--- a/drivers/pinctrl/pinctrl-samsung.h
+++ b/drivers/pinctrl/pinctrl-samsung.h
@@ -246,5 +246,9 @@  extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2412_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2416_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2440_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2450_pin_ctrl[];
 
 #endif /* __PINCTRL_SAMSUNG_H */