| Message ID | 1367931671-3906-6-git-send-email-amit.daniel@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hey Amit, On 07-05-2013 09:00, Amit Daniel Kachhap wrote: > This code splits the exynos tmu driver code into SOC specific data parts. > This will simplify adding new SOC specific data to the same TMU controller. I like the idea of spliting the code from data. The driver goes into a self contained direction. Thanks for doing this.Couple of minor comments follows. > > Acked-by: Kukjin Kim <kgene.kim@samsung.com> > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > --- > drivers/thermal/samsung/Kconfig | 13 ++++- > drivers/thermal/samsung/Makefile | 1 + > drivers/thermal/samsung/exynos_thermal_common.h | 3 +- > drivers/thermal/samsung/exynos_tmu.c | 67 +------------------ > drivers/thermal/samsung/exynos_tmu_data.c | 78 +++++++++++++++++++++++ > drivers/thermal/samsung/exynos_tmu_data.h | 41 ++++++++++++ > 6 files changed, 137 insertions(+), 66 deletions(-) > create mode 100644 drivers/thermal/samsung/exynos_tmu_data.c > create mode 100644 drivers/thermal/samsung/exynos_tmu_data.h > > diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig > index 7857e20..f23f533 100644 > --- a/drivers/thermal/samsung/Kconfig > +++ b/drivers/thermal/samsung/Kconfig > @@ -5,7 +5,8 @@ config EXYNOS_THERMAL > If you say yes here you get support for the exynos thermal driver > for exynos4 and exynos5 soc. This driver initialises the TMU, reports > temperature and handles cooling action if defined. This driver uses > - core thermal API's. > + core thermal API's and TMU configuration data from the supported > + soc's. > > config EXYNOS_THERMAL_CORE > bool "Core thermal framework support for EXYNOS SOC's" > @@ -15,3 +16,13 @@ config EXYNOS_THERMAL_CORE > (Thermal Management Unit) common registration/unregistration > functions to the core thermal layer and also to use the generic > cpu cooling API's. > + > +config EXYNOS_THERMAL_DATA > + bool "Temperature sensor congiguration data for EXYNOS series SOC" > + depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250) > + depends on EXYNOS_THERMAL > + help > + If you say yes here you can enable TMU (Thermal Management Unit) on > + SAMSUNG EXYNOS 4210, 4412, 4414 and 5250 series of SoC. This option > + enables/prepares the configuration, trip and cooling data for the TMU > + driver. What is your strategy here? Looks like you want to provide all required data (for all supported SoCs) based on 1 config entry (EXYNOS_THERMAL_DATA). What do you think of having one per SoC supported? > diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile > index 22528d6..c0446e8 100644 > --- a/drivers/thermal/samsung/Makefile > +++ b/drivers/thermal/samsung/Makefile > @@ -4,3 +4,4 @@ > obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o > exynos_thermal-y := exynos_tmu.o > exynos_thermal-$(CONFIG_EXYNOS_THERMAL_CORE) += exynos_thermal_common.o > +exynos_thermal-$(CONFIG_EXYNOS_THERMAL_DATA) += exynos_tmu_data.o > diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h > index 1c3f8b7..3b85858 100644 > --- a/drivers/thermal/samsung/exynos_thermal_common.h > +++ b/drivers/thermal/samsung/exynos_thermal_common.h > @@ -62,7 +62,7 @@ struct freq_clip_table { > struct thermal_trip_point_conf { > int trip_val[MAX_TRIP_COUNT]; > int trip_count; > - u8 trigger_falling; > + unsigned char trigger_falling; > }; Why do you need this change to bifurcate data / code? (Sounds like you probably want to send this in a separate patch, as it seams to be a separated issue). > > struct thermal_cooling_conf { > @@ -93,6 +93,5 @@ exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { return 0; } > > static inline void > exynos_report_trigger(void) { return; } > - I dont think this is realted to this patch. > #endif /* CONFIG_EXYNOS_COMMON */ > #endif /* _LINUX_EXYNOS_THERMAL_COMMON_H */ > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index a02f2c9..05b5068 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -34,6 +34,7 @@ > #include <linux/workqueue.h> > #include "exynos_thermal_common.h" > #include "exynos_tmu.h" > +#include "exynos_tmu_data.h" > > /* Exynos generic registers */ > #define EXYNOS_TMU_REG_TRIMINFO 0x0 > @@ -385,66 +386,6 @@ static struct thermal_sensor_conf exynos_sensor_conf = { > .write_emul_temp = exynos_tmu_set_emulation, > }; > > -#if defined(CONFIG_CPU_EXYNOS4210) > -static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = { > - .threshold = 80, > - .trigger_levels[0] = 5, > - .trigger_levels[1] = 20, > - .trigger_levels[2] = 30, > - .trigger_level0_en = 1, > - .trigger_level1_en = 1, > - .trigger_level2_en = 1, > - .trigger_level3_en = 0, > - .gain = 15, > - .reference_voltage = 7, > - .cal_type = TYPE_ONE_POINT_TRIMMING, > - .freq_tab[0] = { > - .freq_clip_max = 800 * 1000, > - .temp_level = 85, > - }, > - .freq_tab[1] = { > - .freq_clip_max = 200 * 1000, > - .temp_level = 100, > - }, > - .freq_tab_count = 2, > - .type = SOC_ARCH_EXYNOS4210, > -}; > -#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) > -#else > -#define EXYNOS4210_TMU_DRV_DATA (NULL) > -#endif > - > -#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412) > -static struct exynos_tmu_platform_data const exynos_default_tmu_data = { > - .threshold_falling = 10, > - .trigger_levels[0] = 85, > - .trigger_levels[1] = 103, > - .trigger_levels[2] = 110, > - .trigger_level0_en = 1, > - .trigger_level1_en = 1, > - .trigger_level2_en = 1, > - .trigger_level3_en = 0, > - .gain = 8, > - .reference_voltage = 16, > - .noise_cancel_mode = 4, > - .cal_type = TYPE_ONE_POINT_TRIMMING, > - .efuse_value = 55, > - .freq_tab[0] = { > - .freq_clip_max = 800 * 1000, > - .temp_level = 85, > - }, > - .freq_tab[1] = { > - .freq_clip_max = 200 * 1000, > - .temp_level = 103, > - }, > - .freq_tab_count = 2, > - .type = SOC_ARCH_EXYNOS, > -}; > -#define EXYNOS_TMU_DRV_DATA (&exynos_default_tmu_data) > -#else > -#define EXYNOS_TMU_DRV_DATA (NULL) > -#endif > - > #ifdef CONFIG_OF > static const struct of_device_id exynos_tmu_match[] = { > { > @@ -453,11 +394,11 @@ static const struct of_device_id exynos_tmu_match[] = { > }, > { > .compatible = "samsung,exynos4412-tmu", > - .data = (void *)EXYNOS_TMU_DRV_DATA, > + .data = (void *)EXYNOS5250_TMU_DRV_DATA, > }, > { > .compatible = "samsung,exynos5250-tmu", > - .data = (void *)EXYNOS_TMU_DRV_DATA, > + .data = (void *)EXYNOS5250_TMU_DRV_DATA, > }, > {}, > }; > @@ -471,7 +412,7 @@ static struct platform_device_id exynos_tmu_driver_ids[] = { > }, > { > .name = "exynos5250-tmu", > - .driver_data = (kernel_ulong_t)EXYNOS_TMU_DRV_DATA, > + .driver_data = (kernel_ulong_t)EXYNOS5250_TMU_DRV_DATA, > }, > { }, > }; > diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c > new file mode 100644 > index 0000000..13a60ca > --- /dev/null > +++ b/drivers/thermal/samsung/exynos_tmu_data.c > @@ -0,0 +1,78 @@ > +/* > + * exynos_tmu_data.c - Samsung EXYNOS tmu data file > + * > + * Copyright (C) 2013 Samsung Electronics > + * Amit Daniel Kachhap <amit.daniel@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA > + * > + */ > + > +#include "exynos_thermal_common.h" > +#include "exynos_tmu.h" > + > +#if defined(CONFIG_CPU_EXYNOS4210) > +struct exynos_tmu_platform_data const exynos4210_default_tmu_data = { > + .threshold = 80, > + .trigger_levels[0] = 5, > + .trigger_levels[1] = 20, > + .trigger_levels[2] = 30, > + .trigger_level0_en = 1, > + .trigger_level1_en = 1, > + .trigger_level2_en = 1, > + .trigger_level3_en = 0, > + .gain = 15, > + .reference_voltage = 7, > + .cal_type = TYPE_ONE_POINT_TRIMMING, > + .freq_tab[0] = { > + .freq_clip_max = 800 * 1000, > + .temp_level = 85, > + }, > + .freq_tab[1] = { > + .freq_clip_max = 200 * 1000, > + .temp_level = 100, > + }, > + .freq_tab_count = 2, > + .type = SOC_ARCH_EXYNOS4210, > +}; > +#endif > + > +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412) > +struct exynos_tmu_platform_data const exynos5250_default_tmu_data = { > + .threshold_falling = 10, > + .trigger_levels[0] = 85, > + .trigger_levels[1] = 103, > + .trigger_levels[2] = 110, > + .trigger_level0_en = 1, > + .trigger_level1_en = 1, > + .trigger_level2_en = 1, > + .trigger_level3_en = 0, > + .gain = 8, > + .reference_voltage = 16, > + .noise_cancel_mode = 4, > + .cal_type = TYPE_ONE_POINT_TRIMMING, > + .efuse_value = 55, > + .freq_tab[0] = { > + .freq_clip_max = 800 * 1000, > + .temp_level = 85, > + }, > + .freq_tab[1] = { > + .freq_clip_max = 200 * 1000, > + .temp_level = 103, > + }, > + .freq_tab_count = 2, > + .type = SOC_ARCH_EXYNOS, > +}; > +#endif If you define config entries per SoC data, you could have a file per SoC data and remove the #ifdefery by solving the config in the Makefile. What do you think? > diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h > new file mode 100644 > index 0000000..5b69711 > --- /dev/null > +++ b/drivers/thermal/samsung/exynos_tmu_data.h > @@ -0,0 +1,41 @@ > +/* > + * exynos_tmu_data.h - Samsung EXYNOS tmu data header file > + * > + * Copyright (C) 2013 Samsung Electronics > + * Amit Daniel Kachhap <amit.daniel@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA > + * > + */ > + > +#ifndef _LINUX_EXYNOS_TMU_DATA_H > +#define _LINUX_EXYNOS_TMU_DATA_H > + how about _EXYNOS_TMU_DATA_H ? > +#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_EXYNOS_THERMAL_DATA) > +extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data; > +#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) > +#else > +#define EXYNOS4210_TMU_DRV_DATA (NULL) > +#endif > + > +#if (defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)) && \ > +defined(CONFIG_EXYNOS_THERMAL_DATA) > +extern struct exynos_tmu_platform_data const exynos5250_default_tmu_data; > +#define EXYNOS5250_TMU_DRV_DATA (&exynos5250_default_tmu_data) > +#else > +#define EXYNOS5250_TMU_DRV_DATA (NULL) > +#endif > + > +#endif /*_LINUX_EXYNOS_TMU_DATA_H*/ >
Hi Eduardo, On Thu, May 9, 2013 at 7:09 PM, Eduardo Valentin <eduardo.valentin@ti.com> wrote: > Hey Amit, > > On 07-05-2013 09:00, Amit Daniel Kachhap wrote: >> This code splits the exynos tmu driver code into SOC specific data parts. >> This will simplify adding new SOC specific data to the same TMU controller. > > I like the idea of spliting the code from data. The driver goes into a > self contained direction. Thanks for doing this.Couple of minor comments > follows. > >> >> Acked-by: Kukjin Kim <kgene.kim@samsung.com> >> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >> --- >> drivers/thermal/samsung/Kconfig | 13 ++++- >> drivers/thermal/samsung/Makefile | 1 + >> drivers/thermal/samsung/exynos_thermal_common.h | 3 +- >> drivers/thermal/samsung/exynos_tmu.c | 67 +------------------ >> drivers/thermal/samsung/exynos_tmu_data.c | 78 +++++++++++++++++++++++ >> drivers/thermal/samsung/exynos_tmu_data.h | 41 ++++++++++++ >> 6 files changed, 137 insertions(+), 66 deletions(-) >> create mode 100644 drivers/thermal/samsung/exynos_tmu_data.c >> create mode 100644 drivers/thermal/samsung/exynos_tmu_data.h >> >> diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig >> index 7857e20..f23f533 100644 >> --- a/drivers/thermal/samsung/Kconfig >> +++ b/drivers/thermal/samsung/Kconfig >> @@ -5,7 +5,8 @@ config EXYNOS_THERMAL >> If you say yes here you get support for the exynos thermal driver >> for exynos4 and exynos5 soc. This driver initialises the TMU, reports >> temperature and handles cooling action if defined. This driver uses >> - core thermal API's. >> + core thermal API's and TMU configuration data from the supported >> + soc's. >> >> config EXYNOS_THERMAL_CORE >> bool "Core thermal framework support for EXYNOS SOC's" >> @@ -15,3 +16,13 @@ config EXYNOS_THERMAL_CORE >> (Thermal Management Unit) common registration/unregistration >> functions to the core thermal layer and also to use the generic >> cpu cooling API's. >> + >> +config EXYNOS_THERMAL_DATA >> + bool "Temperature sensor congiguration data for EXYNOS series SOC" >> + depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250) >> + depends on EXYNOS_THERMAL >> + help >> + If you say yes here you can enable TMU (Thermal Management Unit) on >> + SAMSUNG EXYNOS 4210, 4412, 4414 and 5250 series of SoC. This option >> + enables/prepares the configuration, trip and cooling data for the TMU >> + driver. > > What is your strategy here? Looks like you want to provide all required > data (for all supported SoCs) based on 1 config entry > (EXYNOS_THERMAL_DATA). What do you think of having one per SoC supported? Yesterday you gave a comment that introduce something like ARCH_HAS_TMU so now each SOC if needed will enable this from the platform Kconfig. In this scenario I will remove EXYNOS_THERMAL_DATA as it is not required. Also having new Kconfig or each data file for each SOC seems too much to me :) although they are logically correct. In many cases different soc's share the same data(here 5250, 4412, 4212). For this re-structuring I feel a single file for data looks fine. Thanks, Amit Daniel > >> diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile >> index 22528d6..c0446e8 100644 >> --- a/drivers/thermal/samsung/Makefile >> +++ b/drivers/thermal/samsung/Makefile >> @@ -4,3 +4,4 @@ >> obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o >> exynos_thermal-y := exynos_tmu.o >> exynos_thermal-$(CONFIG_EXYNOS_THERMAL_CORE) += exynos_thermal_common.o >> +exynos_thermal-$(CONFIG_EXYNOS_THERMAL_DATA) += exynos_tmu_data.o >> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h >> index 1c3f8b7..3b85858 100644 >> --- a/drivers/thermal/samsung/exynos_thermal_common.h >> +++ b/drivers/thermal/samsung/exynos_thermal_common.h >> @@ -62,7 +62,7 @@ struct freq_clip_table { >> struct thermal_trip_point_conf { >> int trip_val[MAX_TRIP_COUNT]; >> int trip_count; >> - u8 trigger_falling; >> + unsigned char trigger_falling; >> }; > > Why do you need this change to bifurcate data / code? (Sounds like you > probably want to send this in a separate patch, as it seams to be a > separated issue). > >> >> struct thermal_cooling_conf { >> @@ -93,6 +93,5 @@ exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { return 0; } >> >> static inline void >> exynos_report_trigger(void) { return; } >> - > > I dont think this is realted to this patch. > >> #endif /* CONFIG_EXYNOS_COMMON */ >> #endif /* _LINUX_EXYNOS_THERMAL_COMMON_H */ >> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c >> index a02f2c9..05b5068 100644 >> --- a/drivers/thermal/samsung/exynos_tmu.c >> +++ b/drivers/thermal/samsung/exynos_tmu.c >> @@ -34,6 +34,7 @@ >> #include <linux/workqueue.h> >> #include "exynos_thermal_common.h" >> #include "exynos_tmu.h" >> +#include "exynos_tmu_data.h" >> >> /* Exynos generic registers */ >> #define EXYNOS_TMU_REG_TRIMINFO 0x0 >> @@ -385,66 +386,6 @@ static struct thermal_sensor_conf exynos_sensor_conf = { >> .write_emul_temp = exynos_tmu_set_emulation, >> }; >> >> -#if defined(CONFIG_CPU_EXYNOS4210) >> -static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = { >> - .threshold = 80, >> - .trigger_levels[0] = 5, >> - .trigger_levels[1] = 20, >> - .trigger_levels[2] = 30, >> - .trigger_level0_en = 1, >> - .trigger_level1_en = 1, >> - .trigger_level2_en = 1, >> - .trigger_level3_en = 0, >> - .gain = 15, >> - .reference_voltage = 7, >> - .cal_type = TYPE_ONE_POINT_TRIMMING, >> - .freq_tab[0] = { >> - .freq_clip_max = 800 * 1000, >> - .temp_level = 85, >> - }, >> - .freq_tab[1] = { >> - .freq_clip_max = 200 * 1000, >> - .temp_level = 100, >> - }, >> - .freq_tab_count = 2, >> - .type = SOC_ARCH_EXYNOS4210, >> -}; >> -#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) >> -#else >> -#define EXYNOS4210_TMU_DRV_DATA (NULL) >> -#endif >> - >> -#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412) >> -static struct exynos_tmu_platform_data const exynos_default_tmu_data = { >> - .threshold_falling = 10, >> - .trigger_levels[0] = 85, >> - .trigger_levels[1] = 103, >> - .trigger_levels[2] = 110, >> - .trigger_level0_en = 1, >> - .trigger_level1_en = 1, >> - .trigger_level2_en = 1, >> - .trigger_level3_en = 0, >> - .gain = 8, >> - .reference_voltage = 16, >> - .noise_cancel_mode = 4, >> - .cal_type = TYPE_ONE_POINT_TRIMMING, >> - .efuse_value = 55, >> - .freq_tab[0] = { >> - .freq_clip_max = 800 * 1000, >> - .temp_level = 85, >> - }, >> - .freq_tab[1] = { >> - .freq_clip_max = 200 * 1000, >> - .temp_level = 103, >> - }, >> - .freq_tab_count = 2, >> - .type = SOC_ARCH_EXYNOS, >> -}; >> -#define EXYNOS_TMU_DRV_DATA (&exynos_default_tmu_data) >> -#else >> -#define EXYNOS_TMU_DRV_DATA (NULL) >> -#endif >> - >> #ifdef CONFIG_OF >> static const struct of_device_id exynos_tmu_match[] = { >> { >> @@ -453,11 +394,11 @@ static const struct of_device_id exynos_tmu_match[] = { >> }, >> { >> .compatible = "samsung,exynos4412-tmu", >> - .data = (void *)EXYNOS_TMU_DRV_DATA, >> + .data = (void *)EXYNOS5250_TMU_DRV_DATA, >> }, >> { >> .compatible = "samsung,exynos5250-tmu", >> - .data = (void *)EXYNOS_TMU_DRV_DATA, >> + .data = (void *)EXYNOS5250_TMU_DRV_DATA, >> }, >> {}, >> }; >> @@ -471,7 +412,7 @@ static struct platform_device_id exynos_tmu_driver_ids[] = { >> }, >> { >> .name = "exynos5250-tmu", >> - .driver_data = (kernel_ulong_t)EXYNOS_TMU_DRV_DATA, >> + .driver_data = (kernel_ulong_t)EXYNOS5250_TMU_DRV_DATA, >> }, >> { }, >> }; >> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c >> new file mode 100644 >> index 0000000..13a60ca >> --- /dev/null >> +++ b/drivers/thermal/samsung/exynos_tmu_data.c >> @@ -0,0 +1,78 @@ >> +/* >> + * exynos_tmu_data.c - Samsung EXYNOS tmu data file >> + * >> + * Copyright (C) 2013 Samsung Electronics >> + * Amit Daniel Kachhap <amit.daniel@samsung.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program; if not, write to the Free Software >> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA >> + * >> + */ >> + >> +#include "exynos_thermal_common.h" >> +#include "exynos_tmu.h" >> + >> +#if defined(CONFIG_CPU_EXYNOS4210) >> +struct exynos_tmu_platform_data const exynos4210_default_tmu_data = { >> + .threshold = 80, >> + .trigger_levels[0] = 5, >> + .trigger_levels[1] = 20, >> + .trigger_levels[2] = 30, >> + .trigger_level0_en = 1, >> + .trigger_level1_en = 1, >> + .trigger_level2_en = 1, >> + .trigger_level3_en = 0, >> + .gain = 15, >> + .reference_voltage = 7, >> + .cal_type = TYPE_ONE_POINT_TRIMMING, >> + .freq_tab[0] = { >> + .freq_clip_max = 800 * 1000, >> + .temp_level = 85, >> + }, >> + .freq_tab[1] = { >> + .freq_clip_max = 200 * 1000, >> + .temp_level = 100, >> + }, >> + .freq_tab_count = 2, >> + .type = SOC_ARCH_EXYNOS4210, >> +}; >> +#endif >> + >> +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412) >> +struct exynos_tmu_platform_data const exynos5250_default_tmu_data = { >> + .threshold_falling = 10, >> + .trigger_levels[0] = 85, >> + .trigger_levels[1] = 103, >> + .trigger_levels[2] = 110, >> + .trigger_level0_en = 1, >> + .trigger_level1_en = 1, >> + .trigger_level2_en = 1, >> + .trigger_level3_en = 0, >> + .gain = 8, >> + .reference_voltage = 16, >> + .noise_cancel_mode = 4, >> + .cal_type = TYPE_ONE_POINT_TRIMMING, >> + .efuse_value = 55, >> + .freq_tab[0] = { >> + .freq_clip_max = 800 * 1000, >> + .temp_level = 85, >> + }, >> + .freq_tab[1] = { >> + .freq_clip_max = 200 * 1000, >> + .temp_level = 103, >> + }, >> + .freq_tab_count = 2, >> + .type = SOC_ARCH_EXYNOS, >> +}; >> +#endif > > If you define config entries per SoC data, you could have a file per SoC > data and remove the #ifdefery by solving the config in the Makefile. > What do you think? > >> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h >> new file mode 100644 >> index 0000000..5b69711 >> --- /dev/null >> +++ b/drivers/thermal/samsung/exynos_tmu_data.h >> @@ -0,0 +1,41 @@ >> +/* >> + * exynos_tmu_data.h - Samsung EXYNOS tmu data header file >> + * >> + * Copyright (C) 2013 Samsung Electronics >> + * Amit Daniel Kachhap <amit.daniel@samsung.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program; if not, write to the Free Software >> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA >> + * >> + */ >> + >> +#ifndef _LINUX_EXYNOS_TMU_DATA_H >> +#define _LINUX_EXYNOS_TMU_DATA_H >> + > how about _EXYNOS_TMU_DATA_H ? > > > >> +#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_EXYNOS_THERMAL_DATA) >> +extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data; >> +#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) >> +#else >> +#define EXYNOS4210_TMU_DRV_DATA (NULL) >> +#endif >> + >> +#if (defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)) && \ >> +defined(CONFIG_EXYNOS_THERMAL_DATA) >> +extern struct exynos_tmu_platform_data const exynos5250_default_tmu_data; >> +#define EXYNOS5250_TMU_DRV_DATA (&exynos5250_default_tmu_data) >> +#else >> +#define EXYNOS5250_TMU_DRV_DATA (NULL) >> +#endif >> + >> +#endif /*_LINUX_EXYNOS_TMU_DATA_H*/ >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig index 7857e20..f23f533 100644 --- a/drivers/thermal/samsung/Kconfig +++ b/drivers/thermal/samsung/Kconfig @@ -5,7 +5,8 @@ config EXYNOS_THERMAL If you say yes here you get support for the exynos thermal driver for exynos4 and exynos5 soc. This driver initialises the TMU, reports temperature and handles cooling action if defined. This driver uses - core thermal API's. + core thermal API's and TMU configuration data from the supported + soc's. config EXYNOS_THERMAL_CORE bool "Core thermal framework support for EXYNOS SOC's" @@ -15,3 +16,13 @@ config EXYNOS_THERMAL_CORE (Thermal Management Unit) common registration/unregistration functions to the core thermal layer and also to use the generic cpu cooling API's. + +config EXYNOS_THERMAL_DATA + bool "Temperature sensor congiguration data for EXYNOS series SOC" + depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250) + depends on EXYNOS_THERMAL + help + If you say yes here you can enable TMU (Thermal Management Unit) on + SAMSUNG EXYNOS 4210, 4412, 4414 and 5250 series of SoC. This option + enables/prepares the configuration, trip and cooling data for the TMU + driver. diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile index 22528d6..c0446e8 100644 --- a/drivers/thermal/samsung/Makefile +++ b/drivers/thermal/samsung/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o exynos_thermal-y := exynos_tmu.o exynos_thermal-$(CONFIG_EXYNOS_THERMAL_CORE) += exynos_thermal_common.o +exynos_thermal-$(CONFIG_EXYNOS_THERMAL_DATA) += exynos_tmu_data.o diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h index 1c3f8b7..3b85858 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.h +++ b/drivers/thermal/samsung/exynos_thermal_common.h @@ -62,7 +62,7 @@ struct freq_clip_table { struct thermal_trip_point_conf { int trip_val[MAX_TRIP_COUNT]; int trip_count; - u8 trigger_falling; + unsigned char trigger_falling; }; struct thermal_cooling_conf { @@ -93,6 +93,5 @@ exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { return 0; } static inline void exynos_report_trigger(void) { return; } - #endif /* CONFIG_EXYNOS_COMMON */ #endif /* _LINUX_EXYNOS_THERMAL_COMMON_H */ diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index a02f2c9..05b5068 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -34,6 +34,7 @@ #include <linux/workqueue.h> #include "exynos_thermal_common.h" #include "exynos_tmu.h" +#include "exynos_tmu_data.h" /* Exynos generic registers */ #define EXYNOS_TMU_REG_TRIMINFO 0x0 @@ -385,66 +386,6 @@ static struct thermal_sensor_conf exynos_sensor_conf = { .write_emul_temp = exynos_tmu_set_emulation, }; -#if defined(CONFIG_CPU_EXYNOS4210) -static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = { - .threshold = 80, - .trigger_levels[0] = 5, - .trigger_levels[1] = 20, - .trigger_levels[2] = 30, - .trigger_level0_en = 1, - .trigger_level1_en = 1, - .trigger_level2_en = 1, - .trigger_level3_en = 0, - .gain = 15, - .reference_voltage = 7, - .cal_type = TYPE_ONE_POINT_TRIMMING, - .freq_tab[0] = { - .freq_clip_max = 800 * 1000, - .temp_level = 85, - }, - .freq_tab[1] = { - .freq_clip_max = 200 * 1000, - .temp_level = 100, - }, - .freq_tab_count = 2, - .type = SOC_ARCH_EXYNOS4210, -}; -#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) -#else -#define EXYNOS4210_TMU_DRV_DATA (NULL) -#endif - -#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412) -static struct exynos_tmu_platform_data const exynos_default_tmu_data = { - .threshold_falling = 10, - .trigger_levels[0] = 85, - .trigger_levels[1] = 103, - .trigger_levels[2] = 110, - .trigger_level0_en = 1, - .trigger_level1_en = 1, - .trigger_level2_en = 1, - .trigger_level3_en = 0, - .gain = 8, - .reference_voltage = 16, - .noise_cancel_mode = 4, - .cal_type = TYPE_ONE_POINT_TRIMMING, - .efuse_value = 55, - .freq_tab[0] = { - .freq_clip_max = 800 * 1000, - .temp_level = 85, - }, - .freq_tab[1] = { - .freq_clip_max = 200 * 1000, - .temp_level = 103, - }, - .freq_tab_count = 2, - .type = SOC_ARCH_EXYNOS, -}; -#define EXYNOS_TMU_DRV_DATA (&exynos_default_tmu_data) -#else -#define EXYNOS_TMU_DRV_DATA (NULL) -#endif - #ifdef CONFIG_OF static const struct of_device_id exynos_tmu_match[] = { { @@ -453,11 +394,11 @@ static const struct of_device_id exynos_tmu_match[] = { }, { .compatible = "samsung,exynos4412-tmu", - .data = (void *)EXYNOS_TMU_DRV_DATA, + .data = (void *)EXYNOS5250_TMU_DRV_DATA, }, { .compatible = "samsung,exynos5250-tmu", - .data = (void *)EXYNOS_TMU_DRV_DATA, + .data = (void *)EXYNOS5250_TMU_DRV_DATA, }, {}, }; @@ -471,7 +412,7 @@ static struct platform_device_id exynos_tmu_driver_ids[] = { }, { .name = "exynos5250-tmu", - .driver_data = (kernel_ulong_t)EXYNOS_TMU_DRV_DATA, + .driver_data = (kernel_ulong_t)EXYNOS5250_TMU_DRV_DATA, }, { }, }; diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c new file mode 100644 index 0000000..13a60ca --- /dev/null +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -0,0 +1,78 @@ +/* + * exynos_tmu_data.c - Samsung EXYNOS tmu data file + * + * Copyright (C) 2013 Samsung Electronics + * Amit Daniel Kachhap <amit.daniel@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include "exynos_thermal_common.h" +#include "exynos_tmu.h" + +#if defined(CONFIG_CPU_EXYNOS4210) +struct exynos_tmu_platform_data const exynos4210_default_tmu_data = { + .threshold = 80, + .trigger_levels[0] = 5, + .trigger_levels[1] = 20, + .trigger_levels[2] = 30, + .trigger_level0_en = 1, + .trigger_level1_en = 1, + .trigger_level2_en = 1, + .trigger_level3_en = 0, + .gain = 15, + .reference_voltage = 7, + .cal_type = TYPE_ONE_POINT_TRIMMING, + .freq_tab[0] = { + .freq_clip_max = 800 * 1000, + .temp_level = 85, + }, + .freq_tab[1] = { + .freq_clip_max = 200 * 1000, + .temp_level = 100, + }, + .freq_tab_count = 2, + .type = SOC_ARCH_EXYNOS4210, +}; +#endif + +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412) +struct exynos_tmu_platform_data const exynos5250_default_tmu_data = { + .threshold_falling = 10, + .trigger_levels[0] = 85, + .trigger_levels[1] = 103, + .trigger_levels[2] = 110, + .trigger_level0_en = 1, + .trigger_level1_en = 1, + .trigger_level2_en = 1, + .trigger_level3_en = 0, + .gain = 8, + .reference_voltage = 16, + .noise_cancel_mode = 4, + .cal_type = TYPE_ONE_POINT_TRIMMING, + .efuse_value = 55, + .freq_tab[0] = { + .freq_clip_max = 800 * 1000, + .temp_level = 85, + }, + .freq_tab[1] = { + .freq_clip_max = 200 * 1000, + .temp_level = 103, + }, + .freq_tab_count = 2, + .type = SOC_ARCH_EXYNOS, +}; +#endif diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h new file mode 100644 index 0000000..5b69711 --- /dev/null +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -0,0 +1,41 @@ +/* + * exynos_tmu_data.h - Samsung EXYNOS tmu data header file + * + * Copyright (C) 2013 Samsung Electronics + * Amit Daniel Kachhap <amit.daniel@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef _LINUX_EXYNOS_TMU_DATA_H +#define _LINUX_EXYNOS_TMU_DATA_H + +#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_EXYNOS_THERMAL_DATA) +extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data; +#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) +#else +#define EXYNOS4210_TMU_DRV_DATA (NULL) +#endif + +#if (defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)) && \ +defined(CONFIG_EXYNOS_THERMAL_DATA) +extern struct exynos_tmu_platform_data const exynos5250_default_tmu_data; +#define EXYNOS5250_TMU_DRV_DATA (&exynos5250_default_tmu_data) +#else +#define EXYNOS5250_TMU_DRV_DATA (NULL) +#endif + +#endif /*_LINUX_EXYNOS_TMU_DATA_H*/