diff mbox

[BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression

Message ID 20130516210006.GA31836@blackmetal.musicnaut.iki.fi (mailing list archive)
State New, archived
Headers show

Commit Message

Aaro Koskinen May 16, 2013, 9 p.m. UTC
On Thu, May 16, 2013 at 11:09:34AM -0700, Tony Lindgren wrote:
> * Aaro Koskinen <aaro.koskinen@iki.fi> [130513 13:58]:
> > I tested 3.10-rc1 on OMAP1 / Nokia 770, and Retu MFD probe is broken:
> > 
> > [    2.264221] retu-mfd 2-0001: Retu v3.2 found
> > [    2.281951] retu-mfd 2-0001: Failed to allocate IRQs: -12
> > [    2.300140] retu-mfd: probe of 2-0001 failed with error -12
> > 
> > The error is coming from regmap code. According to git bisect, it is
> > caused by:
> > 
> > 	commit ede4d7a5b9835510fd1f724367f68d2fa4128453
> > 	Author: Jon Hunter <jon-hunter@ti.com>
> > 	Date:   Fri Mar 1 11:22:47 2013 -0600
> > 
> > 	    gpio/omap: convert gpio irq domain to linear mapping
> > 
> > The commit does not anymore revert cleanly, and I haven't yet tried
> > crafting a manual revert, so any fix proposals/ideas are welcome...
> 
> Hmm this might be a bit trickier to fix. Obviously the real solution
> is to convert omap1 to SPARSE_IRQ like we did for omap2+.
> 
> For the -rc cycle, it might be possible to fix this by adding a
> different irq_to_gpio() and gpio_to_irq() functions for omap1.

The commit reverts cleanly if we also revert
3513cdeccc647d41c4a9ff923af17deaaac04a66 (gpio/omap: optimise interrupt
service routine), which seems to be just some minor optimization. The
result is below, and with it 770 works again.

A.

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Tony Lindgren May 16, 2013, 9:44 p.m. UTC | #1
* Aaro Koskinen <aaro.koskinen@iki.fi> [130516 14:05]:
> On Thu, May 16, 2013 at 11:09:34AM -0700, Tony Lindgren wrote:
> > * Aaro Koskinen <aaro.koskinen@iki.fi> [130513 13:58]:
> > > I tested 3.10-rc1 on OMAP1 / Nokia 770, and Retu MFD probe is broken:
> > > 
> > > [    2.264221] retu-mfd 2-0001: Retu v3.2 found
> > > [    2.281951] retu-mfd 2-0001: Failed to allocate IRQs: -12
> > > [    2.300140] retu-mfd: probe of 2-0001 failed with error -12
> > > 
> > > The error is coming from regmap code. According to git bisect, it is
> > > caused by:
> > > 
> > > 	commit ede4d7a5b9835510fd1f724367f68d2fa4128453
> > > 	Author: Jon Hunter <jon-hunter@ti.com>
> > > 	Date:   Fri Mar 1 11:22:47 2013 -0600
> > > 
> > > 	    gpio/omap: convert gpio irq domain to linear mapping
> > > 
> > > The commit does not anymore revert cleanly, and I haven't yet tried
> > > crafting a manual revert, so any fix proposals/ideas are welcome...
> > 
> > Hmm this might be a bit trickier to fix. Obviously the real solution
> > is to convert omap1 to SPARSE_IRQ like we did for omap2+.
> > 
> > For the -rc cycle, it might be possible to fix this by adding a
> > different irq_to_gpio() and gpio_to_irq() functions for omap1.
> 
> The commit reverts cleanly if we also revert
> 3513cdeccc647d41c4a9ff923af17deaaac04a66 (gpio/omap: optimise interrupt
> service routine), which seems to be just some minor optimization. The
> result is below, and with it 770 works again.

Hmm in this case it seems that we should just fix it rather than go back
to the old code, so let's take a look at that first.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 2050891..a9b5813 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -52,6 +52,7 @@  struct gpio_bank {
 	struct list_head node;
 	void __iomem *base;
 	u16 irq;
+	int irq_base;
 	struct irq_domain *domain;
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
@@ -87,14 +88,7 @@  struct gpio_bank {
 
 static int irq_to_gpio(struct gpio_bank *bank, unsigned int gpio_irq)
 {
-	return bank->chip.base + gpio_irq;
-}
-
-static int omap_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
-
-	return irq_find_mapping(bank->domain, offset);
+	return gpio_irq - bank->irq_base + bank->chip.base;
 }
 
 static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
@@ -435,7 +429,7 @@  static int gpio_irq_type(struct irq_data *d, unsigned type)
 #endif
 
 	if (!gpio)
-		gpio = irq_to_gpio(bank, d->hwirq);
+		gpio = irq_to_gpio(bank, d->irq);
 
 	if (type & ~IRQ_TYPE_SENSE_MASK)
 		return -EINVAL;
@@ -588,7 +582,7 @@  static void _reset_gpio(struct gpio_bank *bank, int gpio)
 static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned int gpio = irq_to_gpio(bank, d->hwirq);
+	unsigned int gpio = irq_to_gpio(bank, d->irq);
 
 	return _set_gpio_wakeup(bank, gpio, enable);
 }
@@ -688,7 +682,7 @@  static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	void __iomem *isr_reg = NULL;
 	u32 isr;
-	unsigned int bit;
+	unsigned int gpio_irq, gpio_index;
 	struct gpio_bank *bank;
 	int unmasked = 0;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -729,9 +723,14 @@  static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		if (!isr)
 			break;
 
-		while (isr) {
-			bit = __ffs(isr);
-			isr &= ~(1 << bit);
+		gpio_irq = bank->irq_base;
+		for (; isr != 0; isr >>= 1, gpio_irq++) {
+			int gpio = irq_to_gpio(bank, gpio_irq);
+
+			if (!(isr & 1))
+				continue;
+
+			gpio_index = GPIO_INDEX(bank, gpio);
 
 			/*
 			 * Some chips can't respond to both rising and falling
@@ -740,10 +739,10 @@  static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 			 * to respond to the IRQ for the opposite direction.
 			 * This will be indicated in the bank toggle_mask.
 			 */
-			if (bank->toggle_mask & (1 << bit))
-				_toggle_gpio_edge_triggering(bank, bit);
+			if (bank->toggle_mask & (1 << gpio_index))
+				_toggle_gpio_edge_triggering(bank, gpio_index);
 
-			generic_handle_irq(irq_find_mapping(bank->domain, bit));
+			generic_handle_irq(gpio_irq);
 		}
 	}
 	/* if bank has any level sensitive GPIO pin interrupt
@@ -759,7 +758,7 @@  exit:
 static void gpio_irq_shutdown(struct irq_data *d)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned int gpio = irq_to_gpio(bank, d->hwirq);
+	unsigned int gpio = irq_to_gpio(bank, d->irq);
 	unsigned long flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
@@ -770,7 +769,7 @@  static void gpio_irq_shutdown(struct irq_data *d)
 static void gpio_ack_irq(struct irq_data *d)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned int gpio = irq_to_gpio(bank, d->hwirq);
+	unsigned int gpio = irq_to_gpio(bank, d->irq);
 
 	_clear_gpio_irqstatus(bank, gpio);
 }
@@ -778,7 +777,7 @@  static void gpio_ack_irq(struct irq_data *d)
 static void gpio_mask_irq(struct irq_data *d)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned int gpio = irq_to_gpio(bank, d->hwirq);
+	unsigned int gpio = irq_to_gpio(bank, d->irq);
 	unsigned long flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
@@ -790,7 +789,7 @@  static void gpio_mask_irq(struct irq_data *d)
 static void gpio_unmask_irq(struct irq_data *d)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned int gpio = irq_to_gpio(bank, d->hwirq);
+	unsigned int gpio = irq_to_gpio(bank, d->irq);
 	unsigned int irq_mask = GPIO_BIT(bank, gpio);
 	u32 trigger = irqd_get_trigger_type(d);
 	unsigned long flags;
@@ -956,6 +955,14 @@  static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	spin_unlock_irqrestore(&bank->lock, flags);
 }
 
+static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	return bank->irq_base + offset;
+}
+
 /*---------------------------------------------------------------------*/
 
 static void __init omap_gpio_show_rev(struct gpio_bank *bank)
@@ -1052,7 +1059,7 @@  static void omap_gpio_chip_init(struct gpio_bank *bank)
 	bank->chip.direction_output = gpio_output;
 	bank->chip.set_debounce = gpio_debounce;
 	bank->chip.set = gpio_set;
-	bank->chip.to_irq = omap_gpio_to_irq;
+	bank->chip.to_irq = gpio_2irq;
 	if (bank->is_mpuio) {
 		bank->chip.label = "mpuio";
 		if (bank->regs->wkup_en)
@@ -1067,16 +1074,15 @@  static void omap_gpio_chip_init(struct gpio_bank *bank)
 
 	gpiochip_add(&bank->chip);
 
-	for (j = 0; j < bank->width; j++) {
-		int irq = irq_create_mapping(bank->domain, j);
-		irq_set_lockdep_class(irq, &gpio_lock_class);
-		irq_set_chip_data(irq, bank);
+	for (j = bank->irq_base; j < bank->irq_base + bank->width; j++) {
+		irq_set_lockdep_class(j, &gpio_lock_class);
+		irq_set_chip_data(j, bank);
 		if (bank->is_mpuio) {
-			omap_mpuio_alloc_gc(bank, irq, bank->width);
+			omap_mpuio_alloc_gc(bank, j, bank->width);
 		} else {
-			irq_set_chip_and_handler(irq, &gpio_irq_chip,
-						 handle_simple_irq);
-			set_irq_flags(irq, IRQF_VALID);
+			irq_set_chip(j, &gpio_irq_chip);
+			irq_set_handler(j, handle_simple_irq);
+			set_irq_flags(j, IRQF_VALID);
 		}
 	}
 	irq_set_chained_handler(bank->irq, gpio_irq_handler);
@@ -1131,10 +1137,14 @@  static int omap_gpio_probe(struct platform_device *pdev)
 	}
 
 
-	bank->domain = irq_domain_add_linear(node, bank->width,
-					     &irq_domain_simple_ops, NULL);
-	if (!bank->domain)
+	bank->irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
+	if (bank->irq_base < 0) {
+		dev_err(dev, "Couldn't allocate IRQ numbers\n");
 		return -ENODEV;
+	}
+
+	bank->domain = irq_domain_add_legacy(node, bank->width, bank->irq_base,
+					     0, &irq_domain_simple_ops, NULL);
 
 	if (bank->regs->set_dataout && bank->regs->clr_dataout)
 		bank->set_dataout = _set_gpio_dataout_reg;