| Message ID | 1368868514-18975-5-git-send-email-linux@prisktech.co.nz (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
2013/5/18 Tony Prisk <linux@prisktech.co.nz>: > The APC8750 does not support an LCD panel, but provides a VGA connector. > This patch adds support for the VGA interface, and defines an optional > devicetree property to specify the output interface. The default if not > specified is LCD for backward compatibility. > > Signed-off-by: Tony Prisk <linux@prisktech.co.nz> > --- > .../devicetree/bindings/video/wm,wm8505-fb.txt | 5 ++++ > drivers/video/wm8505fb.c | 31 ++++++++++++++++++-- > 2 files changed, 34 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt > index 601416c..9f1d648 100644 > --- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt > +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt > @@ -7,6 +7,10 @@ Required properties: > - bits-per-pixel : bit depth of framebuffer (16 or 32) > - clocks : phandle to DVO clock > > +Optional properties: > +- output-interface : the interface the fb should output on. Valid values are > + "lcd" or "vga". If not specified, the default is "lcd". > + > Required subnodes: > - display-timings: see display-timing.txt for information > > @@ -17,6 +21,7 @@ Example: > reg = <0xd8051700 0x200>; > bits-per-pixel = <16>; > clocks = <&clkdvo>; > + output-interface = "vga"; > > display-timings { > native-mode = <&timing0>; > diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c > index f8bffc2..d1f7f33 100644 > --- a/drivers/video/wm8505fb.c > +++ b/drivers/video/wm8505fb.c > @@ -130,12 +130,17 @@ > > #define to_wm8505fb_info(__info) container_of(__info, \ > struct wm8505fb_info, fb) > + > +#define INTERFACE_LCD 1 > +#define INTERFACE_VGA 2 > + > struct wm8505fb_info { > struct fb_info fb; > void __iomem *regbase; > unsigned int contrast; > struct device *dev; > struct clk *clk_dvo; > + int interface; > }; > > > @@ -158,7 +163,11 @@ static int wm8505fb_init_hw(struct fb_info *info) > * 0x31C sets the correct color mode (RGB565) for WM8650 > * Bit 8+9 (0x300) are ignored on WM8505 as reserved > */ > - writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB); > + if (fbi->interface == INTERFACE_VGA) > + writel(0x338, fbi->regbase + REG_GOVRH_YUVRGB); > + else > + writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB); > + > writel(1, fbi->regbase + REG_GOVRH_DVO_PIX); Tony, Would it be possible to also define known bit offsets for those registers, while you are at this? It would probably reduce the black magic quite a bit :) > /* Virtual buffer size */ > @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info) > > /* black magic ;) */ > writel(0xf, fbi->regbase + REG_GOVRH_FHI); > - writel(4, fbi->regbase + REG_GOVRH_DVO_SET); > + > + if (fbi->interface == INTERFACE_VGA) > + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET); > + else > + writel(4, fbi->regbase + REG_GOVRH_DVO_SET); I don't remember if HDMI is yet another option for this register or not... If it is, it would probably warrant defining fbi->interface as an enum and changing this if-else into a switch statement to let the compiler add its checks/warnings. > writel(1, fbi->regbase + REG_GOVRH_MIF); > writel(1, fbi->regbase + REG_GOVRH_REG_STS); > > @@ -194,11 +208,15 @@ static int wm8505fb_set_timing(struct fb_info *info) > writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END); > writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL); > writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW); > + if (fbi->interface == INTERFACE_VGA) > + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW); Will it misbehave on LCD if you write to the VGA register unconditionally? > writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG); > writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END); > writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN); > writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW); > + if (fbi->interface == INTERFACE_VGA) > + writel(info->var.pixclock, fbi->regbase + REG_GOVRH_VGA_VSYNW); Same here. I would assume that setting the pixclock should not hurt LCD, which would then simplify the code a little. Thanks, Alexey -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 05/18/2013 03:28 PM, Alexey Charkov wrote: > 2013/5/18 Tony Prisk <linux@prisktech.co.nz>: > >> /* Virtual buffer size */ >> @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info) >> >> /* black magic ;) */ >> writel(0xf, fbi->regbase + REG_GOVRH_FHI); >> - writel(4, fbi->regbase + REG_GOVRH_DVO_SET); >> + >> + if (fbi->interface == INTERFACE_VGA) >> + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET); >> + else >> + writel(4, fbi->regbase + REG_GOVRH_DVO_SET); > I don't remember if HDMI is yet another option for this register or > not... If it is, it would probably warrant defining fbi->interface as > an enum and changing this if-else into a switch statement to let the > compiler add its checks/warnings. HDMI output can work simultaneously with LCD (on 8850 at least), which fbi->interface in its current form would not allow to express. > + if (fbi->interface == INTERFACE_VGA) > + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW); > Will it misbehave on LCD if you write to the VGA register unconditionally? > Can we have 3 flags, something like LCD_ON, VGA_ON, HDMI_ON instead of enum for video interface selection? Regards, Andy. -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 19/05/13 01:28, Alexey Charkov wrote: > 2013/5/18 Tony Prisk <linux@prisktech.co.nz>: >> The APC8750 does not support an LCD panel, but provides a VGA connector. >> This patch adds support for the VGA interface, and defines an optional >> devicetree property to specify the output interface. The default if not >> specified is LCD for backward compatibility. >> >> Signed-off-by: Tony Prisk <linux@prisktech.co.nz> >> --- >> .../devicetree/bindings/video/wm,wm8505-fb.txt | 5 ++++ >> drivers/video/wm8505fb.c | 31 ++++++++++++++++++-- >> 2 files changed, 34 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt >> index 601416c..9f1d648 100644 >> --- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt >> +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt >> @@ -7,6 +7,10 @@ Required properties: >> - bits-per-pixel : bit depth of framebuffer (16 or 32) >> - clocks : phandle to DVO clock >> >> +Optional properties: >> +- output-interface : the interface the fb should output on. Valid values are >> + "lcd" or "vga". If not specified, the default is "lcd". >> + >> Required subnodes: >> - display-timings: see display-timing.txt for information >> >> @@ -17,6 +21,7 @@ Example: >> reg = <0xd8051700 0x200>; >> bits-per-pixel = <16>; >> clocks = <&clkdvo>; >> + output-interface = "vga"; >> >> display-timings { >> native-mode = <&timing0>; >> diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c >> index f8bffc2..d1f7f33 100644 >> --- a/drivers/video/wm8505fb.c >> +++ b/drivers/video/wm8505fb.c >> @@ -130,12 +130,17 @@ >> >> #define to_wm8505fb_info(__info) container_of(__info, \ >> struct wm8505fb_info, fb) >> + >> +#define INTERFACE_LCD 1 >> +#define INTERFACE_VGA 2 >> + >> struct wm8505fb_info { >> struct fb_info fb; >> void __iomem *regbase; >> unsigned int contrast; >> struct device *dev; >> struct clk *clk_dvo; >> + int interface; >> }; >> >> >> @@ -158,7 +163,11 @@ static int wm8505fb_init_hw(struct fb_info *info) >> * 0x31C sets the correct color mode (RGB565) for WM8650 >> * Bit 8+9 (0x300) are ignored on WM8505 as reserved >> */ >> - writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB); >> + if (fbi->interface == INTERFACE_VGA) >> + writel(0x338, fbi->regbase + REG_GOVRH_YUVRGB); >> + else >> + writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB); >> + >> writel(1, fbi->regbase + REG_GOVRH_DVO_PIX); > Tony, > > Would it be possible to also define known bit offsets for those > registers, while you are at this? It would probably reduce the black > magic quite a bit :) On my list of things to do :) >> /* Virtual buffer size */ >> @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info) >> >> /* black magic ;) */ >> writel(0xf, fbi->regbase + REG_GOVRH_FHI); >> - writel(4, fbi->regbase + REG_GOVRH_DVO_SET); >> + >> + if (fbi->interface == INTERFACE_VGA) >> + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET); >> + else >> + writel(4, fbi->regbase + REG_GOVRH_DVO_SET); > I don't remember if HDMI is yet another option for this register or > not... If it is, it would probably warrant defining fbi->interface as > an enum and changing this if-else into a switch statement to let the > compiler add its checks/warnings. This register defines the h/v syncpolarity and enable/disable for DVO. > >> writel(1, fbi->regbase + REG_GOVRH_MIF); >> writel(1, fbi->regbase + REG_GOVRH_REG_STS); >> >> @@ -194,11 +208,15 @@ static int wm8505fb_set_timing(struct fb_info *info) >> writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END); >> writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL); >> writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW); >> + if (fbi->interface == INTERFACE_VGA) >> + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW); > Will it misbehave on LCD if you write to the VGA register unconditionally? Don't know - wouldn't imagine so. I will test it and see. > >> writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG); >> writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END); >> writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN); >> writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW); >> + if (fbi->interface == INTERFACE_VGA) >> + writel(info->var.pixclock, fbi->regbase + REG_GOVRH_VGA_VSYNW); > Same here. I would assume that setting the pixclock should not hurt > LCD, which would then simplify the code a little. > > Thanks, > Alexey Regards Tony Prisk -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt index 601416c..9f1d648 100644 --- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt @@ -7,6 +7,10 @@ Required properties: - bits-per-pixel : bit depth of framebuffer (16 or 32) - clocks : phandle to DVO clock +Optional properties: +- output-interface : the interface the fb should output on. Valid values are + "lcd" or "vga". If not specified, the default is "lcd". + Required subnodes: - display-timings: see display-timing.txt for information @@ -17,6 +21,7 @@ Example: reg = <0xd8051700 0x200>; bits-per-pixel = <16>; clocks = <&clkdvo>; + output-interface = "vga"; display-timings { native-mode = <&timing0>; diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c index f8bffc2..d1f7f33 100644 --- a/drivers/video/wm8505fb.c +++ b/drivers/video/wm8505fb.c @@ -130,12 +130,17 @@ #define to_wm8505fb_info(__info) container_of(__info, \ struct wm8505fb_info, fb) + +#define INTERFACE_LCD 1 +#define INTERFACE_VGA 2 + struct wm8505fb_info { struct fb_info fb; void __iomem *regbase; unsigned int contrast; struct device *dev; struct clk *clk_dvo; + int interface; }; @@ -158,7 +163,11 @@ static int wm8505fb_init_hw(struct fb_info *info) * 0x31C sets the correct color mode (RGB565) for WM8650 * Bit 8+9 (0x300) are ignored on WM8505 as reserved */ - writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB); + if (fbi->interface == INTERFACE_VGA) + writel(0x338, fbi->regbase + REG_GOVRH_YUVRGB); + else + writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB); + writel(1, fbi->regbase + REG_GOVRH_DVO_PIX); /* Virtual buffer size */ @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info) /* black magic ;) */ writel(0xf, fbi->regbase + REG_GOVRH_FHI); - writel(4, fbi->regbase + REG_GOVRH_DVO_SET); + + if (fbi->interface == INTERFACE_VGA) + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET); + else + writel(4, fbi->regbase + REG_GOVRH_DVO_SET); + writel(1, fbi->regbase + REG_GOVRH_MIF); writel(1, fbi->regbase + REG_GOVRH_REG_STS); @@ -194,11 +208,15 @@ static int wm8505fb_set_timing(struct fb_info *info) writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END); writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL); writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW); + if (fbi->interface == INTERFACE_VGA) + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW); writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG); writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END); writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN); writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW); + if (fbi->interface == INTERFACE_VGA) + writel(info->var.pixclock, fbi->regbase + REG_GOVRH_VGA_VSYNW); writel(1, fbi->regbase + REG_GOVRH_TG_ENABLE); @@ -371,6 +389,7 @@ static int wm8505fb_probe(struct platform_device *pdev) dma_addr_t fb_mem_phys; unsigned long fb_mem_len; void *fb_mem_virt; + const char *intf; fbi = devm_kzalloc(&pdev->dev, sizeof(struct wm8505fb_info) + sizeof(u32) * 16, GFP_KERNEL); @@ -428,6 +447,14 @@ static int wm8505fb_probe(struct platform_device *pdev) clk_prepare_enable(fbi->clk_dvo); + fbi->interface = INTERFACE_LCD; + ret = of_property_read_string(pdev->dev.of_node, "output-interface", + &intf); + if (!ret) { + if (!strcmp(intf, "vga")) + fbi->interface = INTERFACE_VGA; + } + fb_videomode_to_var(&fbi->fb.var, &mode); fbi->fb.var.nonstd = 0;
The APC8750 does not support an LCD panel, but provides a VGA connector. This patch adds support for the VGA interface, and defines an optional devicetree property to specify the output interface. The default if not specified is LCD for backward compatibility. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> --- .../devicetree/bindings/video/wm,wm8505-fb.txt | 5 ++++ drivers/video/wm8505fb.c | 31 ++++++++++++++++++-- 2 files changed, 34 insertions(+), 2 deletions(-)