| Message ID | 1369917895-9562-1-git-send-email-mpa@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 05/30/2013 02:44 PM, Markus Pargmann wrote: > There are ulpi access ops implemented in drivers/usb/phy/phy-ulpi.c. > mxc access ops implement the same access operations within mach-imx. This > patch removes the mxc ulpi file and uses phy-ulpi instead for > imx_otg_ulpi_create. > > phy-ulpi successfully tested with i.MX27 Phytec phyCARD-S (pca100). > > Signed-off-by: Markus Pargmann <mpa@pengutronix.de> > Acked-by: Sascha Hauer <s.hauer@pengutronix.de> > --- > arch/arm/mach-imx/Kconfig | 1 + > arch/arm/mach-imx/Makefile | 1 - > arch/arm/mach-imx/mach-pca100.c | 4 +- > arch/arm/mach-imx/ulpi.c | 118 ---------------------------------------- > arch/arm/mach-imx/ulpi.h | 9 ++- > 5 files changed, 9 insertions(+), 124 deletions(-) > delete mode 100644 arch/arm/mach-imx/ulpi.c > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index ba44328..ca59799 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -58,6 +58,7 @@ config MXC_USE_EPIT > > config MXC_ULPI > bool > + select USB_ULPI_VIEWPORT > > config ARCH_HAS_RNGA > bool > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > index 70ae7c4..dcb8291 100644 > --- a/arch/arm/mach-imx/Makefile > +++ b/arch/arm/mach-imx/Makefile > @@ -23,7 +23,6 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o > obj-$(CONFIG_MXC_TZIC) += tzic.o > obj-$(CONFIG_MXC_AVIC) += avic.o > > -obj-$(CONFIG_MXC_ULPI) += ulpi.o > obj-$(CONFIG_MXC_USE_EPIT) += epit.o > obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o > > diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c > index b8b15bb..19bb644 100644 > --- a/arch/arm/mach-imx/mach-pca100.c > +++ b/arch/arm/mach-imx/mach-pca100.c > @@ -398,8 +398,8 @@ static void __init pca100_init(void) > imx27_add_fsl_usb2_udc(&otg_device_pdata); > } > > - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, > - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); > + usbh2_pdata.otg = imx_otg_ulpi_create( > + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); Why don't you keep otg_ulpi_create()? http://lxr.free-electrons.com/source/include/linux/usb/ulpi.h#L185 Marc
On Thu, May 30, 2013 at 02:51:13PM +0200, Marc Kleine-Budde wrote: > On 05/30/2013 02:44 PM, Markus Pargmann wrote: > > There are ulpi access ops implemented in drivers/usb/phy/phy-ulpi.c. > > mxc access ops implement the same access operations within mach-imx. This > > patch removes the mxc ulpi file and uses phy-ulpi instead for > > imx_otg_ulpi_create. > > > > phy-ulpi successfully tested with i.MX27 Phytec phyCARD-S (pca100). > > > > Signed-off-by: Markus Pargmann <mpa@pengutronix.de> > > Acked-by: Sascha Hauer <s.hauer@pengutronix.de> > > --- > > arch/arm/mach-imx/Kconfig | 1 + > > arch/arm/mach-imx/Makefile | 1 - > > arch/arm/mach-imx/mach-pca100.c | 4 +- > > arch/arm/mach-imx/ulpi.c | 118 ---------------------------------------- > > arch/arm/mach-imx/ulpi.h | 9 ++- > > 5 files changed, 9 insertions(+), 124 deletions(-) > > delete mode 100644 arch/arm/mach-imx/ulpi.c > > > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > > index ba44328..ca59799 100644 > > --- a/arch/arm/mach-imx/Kconfig > > +++ b/arch/arm/mach-imx/Kconfig > > @@ -58,6 +58,7 @@ config MXC_USE_EPIT > > > > config MXC_ULPI > > bool > > + select USB_ULPI_VIEWPORT > > > > config ARCH_HAS_RNGA > > bool > > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > > index 70ae7c4..dcb8291 100644 > > --- a/arch/arm/mach-imx/Makefile > > +++ b/arch/arm/mach-imx/Makefile > > @@ -23,7 +23,6 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o > > obj-$(CONFIG_MXC_TZIC) += tzic.o > > obj-$(CONFIG_MXC_AVIC) += avic.o > > > > -obj-$(CONFIG_MXC_ULPI) += ulpi.o > > obj-$(CONFIG_MXC_USE_EPIT) += epit.o > > obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o > > > > diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c > > index b8b15bb..19bb644 100644 > > --- a/arch/arm/mach-imx/mach-pca100.c > > +++ b/arch/arm/mach-imx/mach-pca100.c > > @@ -398,8 +398,8 @@ static void __init pca100_init(void) > > imx27_add_fsl_usb2_udc(&otg_device_pdata); > > } > > > > - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, > > - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); > > + usbh2_pdata.otg = imx_otg_ulpi_create( > > + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); > > Why don't you keep otg_ulpi_create()? I could still use otg_ulpi_create with updated access ops (ulpi_viewport_access_ops). But I decided to use imx_otg_ulpi_create because it is used 10 lines above and it is more consistent this way. Regards, Markus
On Thu, May 30, 2013 at 02:44:55PM +0200, Markus Pargmann wrote: > There are ulpi access ops implemented in drivers/usb/phy/phy-ulpi.c. > mxc access ops implement the same access operations within mach-imx. This > patch removes the mxc ulpi file and uses phy-ulpi instead for > imx_otg_ulpi_create. > > phy-ulpi successfully tested with i.MX27 Phytec phyCARD-S (pca100). > > Signed-off-by: Markus Pargmann <mpa@pengutronix.de> > Acked-by: Sascha Hauer <s.hauer@pengutronix.de> > --- > arch/arm/mach-imx/Kconfig | 1 + > arch/arm/mach-imx/Makefile | 1 - > arch/arm/mach-imx/mach-pca100.c | 4 +- > arch/arm/mach-imx/ulpi.c | 118 ---------------------------------------- > arch/arm/mach-imx/ulpi.h | 9 ++- > 5 files changed, 9 insertions(+), 124 deletions(-) > delete mode 100644 arch/arm/mach-imx/ulpi.c > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index ba44328..ca59799 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -58,6 +58,7 @@ config MXC_USE_EPIT > > config MXC_ULPI > bool > + select USB_ULPI_VIEWPORT Is MXC_ULPI still used anywhere after you remove ulpi.c in the patch? You are even patching it, so I'm a little confused. Shawn
On Thu, May 30, 2013 at 10:46:04PM +0800, Shawn Guo wrote: > On Thu, May 30, 2013 at 02:44:55PM +0200, Markus Pargmann wrote: > > There are ulpi access ops implemented in drivers/usb/phy/phy-ulpi.c. > > mxc access ops implement the same access operations within mach-imx. This > > patch removes the mxc ulpi file and uses phy-ulpi instead for > > imx_otg_ulpi_create. > > > > phy-ulpi successfully tested with i.MX27 Phytec phyCARD-S (pca100). > > > > Signed-off-by: Markus Pargmann <mpa@pengutronix.de> > > Acked-by: Sascha Hauer <s.hauer@pengutronix.de> > > --- > > arch/arm/mach-imx/Kconfig | 1 + > > arch/arm/mach-imx/Makefile | 1 - > > arch/arm/mach-imx/mach-pca100.c | 4 +- > > arch/arm/mach-imx/ulpi.c | 118 ---------------------------------------- > > arch/arm/mach-imx/ulpi.h | 9 ++- > > 5 files changed, 9 insertions(+), 124 deletions(-) > > delete mode 100644 arch/arm/mach-imx/ulpi.c > > > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > > index ba44328..ca59799 100644 > > --- a/arch/arm/mach-imx/Kconfig > > +++ b/arch/arm/mach-imx/Kconfig > > @@ -58,6 +58,7 @@ config MXC_USE_EPIT > > > > config MXC_ULPI > > bool > > + select USB_ULPI_VIEWPORT > > Is MXC_ULPI still used anywhere after you remove ulpi.c in the patch? > You are even patching it, so I'm a little confused. No it is not used anywhere else. I removed it and replaced all occurences with USB_ULPI_VIEWPORT. Thanks, Markus
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ba44328..ca59799 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -58,6 +58,7 @@ config MXC_USE_EPIT config MXC_ULPI bool + select USB_ULPI_VIEWPORT config ARCH_HAS_RNGA bool diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 70ae7c4..dcb8291 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_MXC_AVIC) += avic.o -obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index b8b15bb..19bb644 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -398,8 +398,8 @@ static void __init pca100_init(void) imx27_add_fsl_usb2_udc(&otg_device_pdata); } - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + usbh2_pdata.otg = imx_otg_ulpi_create( + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); if (usbh2_pdata.otg) imx27_add_mxc_ehci_hs(2, &usbh2_pdata); diff --git a/arch/arm/mach-imx/ulpi.c b/arch/arm/mach-imx/ulpi.c deleted file mode 100644 index 0f05195..0000000 --- a/arch/arm/mach-imx/ulpi.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> - * Copyright 2009 Daniel Mack <daniel@caiaq.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include "ulpi.h" - -/* ULPIVIEW register bits */ -#define ULPIVW_WU (1 << 31) /* Wakeup */ -#define ULPIVW_RUN (1 << 30) /* read/write run */ -#define ULPIVW_WRITE (1 << 29) /* 0 = read 1 = write */ -#define ULPIVW_SS (1 << 27) /* SyncState */ -#define ULPIVW_PORT_MASK 0x07 /* Port field */ -#define ULPIVW_PORT_SHIFT 24 -#define ULPIVW_ADDR_MASK 0xff /* data address field */ -#define ULPIVW_ADDR_SHIFT 16 -#define ULPIVW_RDATA_MASK 0xff /* read data field */ -#define ULPIVW_RDATA_SHIFT 8 -#define ULPIVW_WDATA_MASK 0xff /* write data field */ -#define ULPIVW_WDATA_SHIFT 0 - -static int ulpi_poll(void __iomem *view, u32 bit) -{ - int timeout = 10000; - - while (timeout--) { - u32 data = __raw_readl(view); - - if (!(data & bit)) - return 0; - - cpu_relax(); - }; - - printk(KERN_WARNING "timeout polling for ULPI device\n"); - - return -ETIMEDOUT; -} - -static int ulpi_read(struct usb_phy *otg, u32 reg) -{ - int ret; - void __iomem *view = otg->io_priv; - - /* make sure interface is running */ - if (!(__raw_readl(view) & ULPIVW_SS)) { - __raw_writel(ULPIVW_WU, view); - - /* wait for wakeup */ - ret = ulpi_poll(view, ULPIVW_WU); - if (ret) - return ret; - } - - /* read the register */ - __raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view); - - /* wait for completion */ - ret = ulpi_poll(view, ULPIVW_RUN); - if (ret) - return ret; - - return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK; -} - -static int ulpi_write(struct usb_phy *otg, u32 val, u32 reg) -{ - int ret; - void __iomem *view = otg->io_priv; - - /* make sure the interface is running */ - if (!(__raw_readl(view) & ULPIVW_SS)) { - __raw_writel(ULPIVW_WU, view); - /* wait for wakeup */ - ret = ulpi_poll(view, ULPIVW_WU); - if (ret) - return ret; - } - - __raw_writel((ULPIVW_RUN | ULPIVW_WRITE | - (reg << ULPIVW_ADDR_SHIFT) | - ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view); - - /* wait for completion */ - return ulpi_poll(view, ULPIVW_RUN); -} - -struct usb_phy_io_ops mxc_ulpi_access_ops = { - .read = ulpi_read, - .write = ulpi_write, -}; -EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops); - -struct usb_phy *imx_otg_ulpi_create(unsigned int flags) -{ - return otg_ulpi_create(&mxc_ulpi_access_ops, flags); -} diff --git a/arch/arm/mach-imx/ulpi.h b/arch/arm/mach-imx/ulpi.h index 42bdaca..8bb0230 100644 --- a/arch/arm/mach-imx/ulpi.h +++ b/arch/arm/mach-imx/ulpi.h @@ -1,8 +1,13 @@ #ifndef __MACH_ULPI_H #define __MACH_ULPI_H +#include <linux/usb/ulpi.h> + #ifdef CONFIG_USB_ULPI -struct usb_phy *imx_otg_ulpi_create(unsigned int flags); +static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) +{ + return otg_ulpi_create(&ulpi_viewport_access_ops, flags); +} #else static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) { @@ -10,7 +15,5 @@ static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) } #endif -extern struct usb_phy_io_ops mxc_ulpi_access_ops; - #endif /* __MACH_ULPI_H */