| Message ID | 1370561253-15523-1-git-send-email-khilman@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 16:27-20130606, Kevin Hilman wrote: > On most OMAP3 platforms, the twl4030 IRQ line is connected to the > SYS_NIRQ line on OMAP. Add another DTS include file > (twl4030_omap3_mux.dtsi) for boards that hook up the twl4030 this way > to include. > > This allows RTC wake from off-mode to work again on OMAP3-based > platforms with twl4030. Tested on 3530/Beagle, 3730/Beagle-xM, > 3530/Overo, 3730/Overo-STORM. > > Special thanks to Florian Vaussard for suggesting use of preprocessor > feature. > > Cc: Florian Vaussard <florian.vaussard@epfl.ch> > Cc: Benoit Cousson <b-cousson@ti.com> > Signed-off-by: Kevin Hilman <khilman@linaro.org> > --- > v2: Updated to change board files instead of twl4030 file. > > arch/arm/boot/dts/omap3-beagle-xm.dts | 1 + > arch/arm/boot/dts/omap3-beagle.dts | 1 + > arch/arm/boot/dts/omap3-devkit8000.dts | 1 + > arch/arm/boot/dts/omap3-evm.dts | 1 + > arch/arm/boot/dts/omap3-igep.dtsi | 1 + > arch/arm/boot/dts/omap3-overo.dtsi | 1 + > arch/arm/boot/dts/omap3430-sdp.dts | 1 + > arch/arm/boot/dts/twl4030_omap3_mux.dtsi | 17 +++++++++++++++++ minor comment: can we do twl4030_omap3 instead? That way, I can add in twl4030 VP specific parameters which are OMAP3 specific? one additional minor comment below: > 8 files changed, 24 insertions(+) > create mode 100644 arch/arm/boot/dts/twl4030_omap3_mux.dtsi > > diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts > index ad17b6b..1afb563 100644 > --- a/arch/arm/boot/dts/omap3-beagle-xm.dts > +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts > @@ -96,6 +96,7 @@ > }; > > #include "twl4030.dtsi" > +#include "twl4030_omap3_mux.dtsi" > > &i2c2 { > clock-frequency = <400000>; > diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts > index eb7e02a..d5810d7 100644 > --- a/arch/arm/boot/dts/omap3-beagle.dts > +++ b/arch/arm/boot/dts/omap3-beagle.dts > @@ -135,6 +135,7 @@ > }; > > #include "twl4030.dtsi" > +#include "twl4030_omap3_mux.dtsi" > > &mmc1 { > vmmc-supply = <&vmmc1>; > diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts > index 5be71b1..166b90c 100644 > --- a/arch/arm/boot/dts/omap3-devkit8000.dts > +++ b/arch/arm/boot/dts/omap3-devkit8000.dts > @@ -81,6 +81,7 @@ > }; > > #include "twl4030.dtsi" > +#include "twl4030_omap3_mux.dtsi" > > &mmc1 { > vmmc-supply = <&vmmc1>; > diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts > index baa24bb..ad7ab86 100644 > --- a/arch/arm/boot/dts/omap3-evm.dts > +++ b/arch/arm/boot/dts/omap3-evm.dts > @@ -45,6 +45,7 @@ > }; > > #include "twl4030.dtsi" > +#include "twl4030_omap3_mux.dtsi" > > &i2c2 { > clock-frequency = <400000>; > diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi > index 5224c29..3107dc3 100644 > --- a/arch/arm/boot/dts/omap3-igep.dtsi > +++ b/arch/arm/boot/dts/omap3-igep.dtsi > @@ -87,6 +87,7 @@ > }; > > #include "twl4030.dtsi" > +#include "twl4030_omap3_mux.dtsi" > > &i2c2 { > clock-frequency = <400000>; > diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi > index 144a5a2..bb55907 100644 > --- a/arch/arm/boot/dts/omap3-overo.dtsi > +++ b/arch/arm/boot/dts/omap3-overo.dtsi > @@ -50,6 +50,7 @@ > }; > > #include "twl4030.dtsi" > +#include "twl4030_omap3_mux.dtsi" > > /* i2c2 pins are used for gpio */ > &i2c2 { > diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts > index 2a725a0..df3b918 100644 > --- a/arch/arm/boot/dts/omap3430-sdp.dts > +++ b/arch/arm/boot/dts/omap3430-sdp.dts > @@ -29,6 +29,7 @@ > }; > > #include "twl4030.dtsi" > +#include "twl4030_omap3_mux.dtsi" > > &mmc1 { > vmmc-supply = <&vmmc1>; > diff --git a/arch/arm/boot/dts/twl4030_omap3_mux.dtsi b/arch/arm/boot/dts/twl4030_omap3_mux.dtsi > new file mode 100644 > index 0000000..1bd0f9f > --- /dev/null > +++ b/arch/arm/boot/dts/twl4030_omap3_mux.dtsi > @@ -0,0 +1,17 @@ some license text? > +&twl { > + pinctrl-names = "default"; > + pinctrl-0 = <&twl4030_pins>; > +}; > + > +&omap3_pmx_core { > + /* > + * On most OMAP3 platforms, the twl4030 IRQ line is connected > + * to the SYS_NIRQ line on OMAP. Therefore, configure the > + * defaults for the SYS_NIRQ pin here. ^^^ tab? > + */ > + twl4030_pins: pinmux_twl4030_pins { > + pinctrl-single,pins = < > + 0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */ > + >; > + }; > +};
Nishanth Menon <nm@ti.com> writes: > On 16:27-20130606, Kevin Hilman wrote: >> On most OMAP3 platforms, the twl4030 IRQ line is connected to the >> SYS_NIRQ line on OMAP. Add another DTS include file >> (twl4030_omap3_mux.dtsi) for boards that hook up the twl4030 this way >> to include. >> >> This allows RTC wake from off-mode to work again on OMAP3-based >> platforms with twl4030. Tested on 3530/Beagle, 3730/Beagle-xM, >> 3530/Overo, 3730/Overo-STORM. >> >> Special thanks to Florian Vaussard for suggesting use of preprocessor >> feature. >> >> Cc: Florian Vaussard <florian.vaussard@epfl.ch> >> Cc: Benoit Cousson <b-cousson@ti.com> >> Signed-off-by: Kevin Hilman <khilman@linaro.org> >> --- >> v2: Updated to change board files instead of twl4030 file. >> >> arch/arm/boot/dts/omap3-beagle-xm.dts | 1 + >> arch/arm/boot/dts/omap3-beagle.dts | 1 + >> arch/arm/boot/dts/omap3-devkit8000.dts | 1 + >> arch/arm/boot/dts/omap3-evm.dts | 1 + >> arch/arm/boot/dts/omap3-igep.dtsi | 1 + >> arch/arm/boot/dts/omap3-overo.dtsi | 1 + >> arch/arm/boot/dts/omap3430-sdp.dts | 1 + >> arch/arm/boot/dts/twl4030_omap3_mux.dtsi | 17 +++++++++++++++++ > minor comment: > can we do twl4030_omap3 instead? That way, I can add in twl4030 VP > specific parameters which are OMAP3 specific? Good idea, I'll rename it to twl4030_omap3.dtsi [...] >> diff --git a/arch/arm/boot/dts/twl4030_omap3_mux.dtsi b/arch/arm/boot/dts/twl4030_omap3_mux.dtsi >> new file mode 100644 >> index 0000000..1bd0f9f >> --- /dev/null >> +++ b/arch/arm/boot/dts/twl4030_omap3_mux.dtsi >> @@ -0,0 +1,17 @@ > some license text? oops >> +&twl { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&twl4030_pins>; >> +}; >> + >> +&omap3_pmx_core { >> + /* >> + * On most OMAP3 platforms, the twl4030 IRQ line is connected >> + * to the SYS_NIRQ line on OMAP. Therefore, configure the >> + * defaults for the SYS_NIRQ pin here. > ^^^ tab? good catch. Thanks for the review, will make the changes and resubmit. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index ad17b6b..1afb563 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -96,6 +96,7 @@ }; #include "twl4030.dtsi" +#include "twl4030_omap3_mux.dtsi" &i2c2 { clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index eb7e02a..d5810d7 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -135,6 +135,7 @@ }; #include "twl4030.dtsi" +#include "twl4030_omap3_mux.dtsi" &mmc1 { vmmc-supply = <&vmmc1>; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 5be71b1..166b90c 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -81,6 +81,7 @@ }; #include "twl4030.dtsi" +#include "twl4030_omap3_mux.dtsi" &mmc1 { vmmc-supply = <&vmmc1>; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index baa24bb..ad7ab86 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -45,6 +45,7 @@ }; #include "twl4030.dtsi" +#include "twl4030_omap3_mux.dtsi" &i2c2 { clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 5224c29..3107dc3 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -87,6 +87,7 @@ }; #include "twl4030.dtsi" +#include "twl4030_omap3_mux.dtsi" &i2c2 { clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index 144a5a2..bb55907 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -50,6 +50,7 @@ }; #include "twl4030.dtsi" +#include "twl4030_omap3_mux.dtsi" /* i2c2 pins are used for gpio */ &i2c2 { diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 2a725a0..df3b918 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -29,6 +29,7 @@ }; #include "twl4030.dtsi" +#include "twl4030_omap3_mux.dtsi" &mmc1 { vmmc-supply = <&vmmc1>; diff --git a/arch/arm/boot/dts/twl4030_omap3_mux.dtsi b/arch/arm/boot/dts/twl4030_omap3_mux.dtsi new file mode 100644 index 0000000..1bd0f9f --- /dev/null +++ b/arch/arm/boot/dts/twl4030_omap3_mux.dtsi @@ -0,0 +1,17 @@ +&twl { + pinctrl-names = "default"; + pinctrl-0 = <&twl4030_pins>; +}; + +&omap3_pmx_core { + /* + * On most OMAP3 platforms, the twl4030 IRQ line is connected + * to the SYS_NIRQ line on OMAP. Therefore, configure the + * defaults for the SYS_NIRQ pin here. + */ + twl4030_pins: pinmux_twl4030_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */ + >; + }; +};
On most OMAP3 platforms, the twl4030 IRQ line is connected to the SYS_NIRQ line on OMAP. Add another DTS include file (twl4030_omap3_mux.dtsi) for boards that hook up the twl4030 this way to include. This allows RTC wake from off-mode to work again on OMAP3-based platforms with twl4030. Tested on 3530/Beagle, 3730/Beagle-xM, 3530/Overo, 3730/Overo-STORM. Special thanks to Florian Vaussard for suggesting use of preprocessor feature. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> --- v2: Updated to change board files instead of twl4030 file. arch/arm/boot/dts/omap3-beagle-xm.dts | 1 + arch/arm/boot/dts/omap3-beagle.dts | 1 + arch/arm/boot/dts/omap3-devkit8000.dts | 1 + arch/arm/boot/dts/omap3-evm.dts | 1 + arch/arm/boot/dts/omap3-igep.dtsi | 1 + arch/arm/boot/dts/omap3-overo.dtsi | 1 + arch/arm/boot/dts/omap3430-sdp.dts | 1 + arch/arm/boot/dts/twl4030_omap3_mux.dtsi | 17 +++++++++++++++++ 8 files changed, 24 insertions(+) create mode 100644 arch/arm/boot/dts/twl4030_omap3_mux.dtsi