diff mbox

[27/28] ARM: EXYNOS: Remove CONFIG_SOC_EXYNOS4412

Message ID 1371238384-1504-28-git-send-email-t.figa@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Tomasz Figa June 14, 2013, 7:33 p.m. UTC 
Exynos4212 and Exynos4412 SoCs differ only in number of ARM cores and
there is no need to have separate Kconfig options for them, since they
use the same code.

This patch removes CONFIG_SOC_EXYNOS4412, leaving CONFIG_SOC_EXYNOS4212
as the one supporting both SoCs from this series.

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <eduardo.valentin@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: cpufreq@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/mach-exynos/Kconfig              | 11 +----------
 arch/arm/plat-samsung/include/plat/cpu.h  |  6 +-----
 drivers/cpufreq/Kconfig.arm               |  2 +-
 drivers/media/platform/exynos4-is/Kconfig |  2 +-
 drivers/thermal/exynos_thermal.c          |  2 +-
 drivers/tty/serial/samsung.c              |  3 +--
 6 files changed, 6 insertions(+), 20 deletions(-)

Comments

Kim Kukjin June 15, 2013, 2:15 a.m. UTC | #1 
Tomasz Figa wrote:
> 
> Exynos4212 and Exynos4412 SoCs differ only in number of ARM cores and
> there is no need to have separate Kconfig options for them, since they
> use the same code.
> 
> This patch removes CONFIG_SOC_EXYNOS4412, leaving CONFIG_SOC_EXYNOS4212
> as the one supporting both SoCs from this series.
> 
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <eduardo.valentin@ti.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: cpufreq@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: linux-serial@vger.kernel.org
> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
>  arch/arm/mach-exynos/Kconfig              | 11 +----------
>  arch/arm/plat-samsung/include/plat/cpu.h  |  6 +-----
>  drivers/cpufreq/Kconfig.arm               |  2 +-
>  drivers/media/platform/exynos4-is/Kconfig |  2 +-
>  drivers/thermal/exynos_thermal.c          |  2 +-
>  drivers/tty/serial/samsung.c              |  3 +--
>  6 files changed, 6 insertions(+), 20 deletions(-)
> 
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index 47d8d9e..fe75a65 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -46,7 +46,7 @@ config CPU_EXYNOS4210
>  	  Enable EXYNOS4210 CPU support
> 
>  config SOC_EXYNOS4212
> -	bool "SAMSUNG EXYNOS4212"
> +	bool "SAMSUNG EXYNOS4212/4412"
>  	default y
>  	depends on ARCH_EXYNOS4
>  	select PINCTRL_EXYNOS
> @@ -56,15 +56,6 @@ config SOC_EXYNOS4212
>  	help
>  	  Enable EXYNOS4212 SoC support
> 
> -config SOC_EXYNOS4412
> -	bool "SAMSUNG EXYNOS4412"
> -	default y
> -	depends on ARCH_EXYNOS4
> -	select PINCTRL_EXYNOS
> -	select SAMSUNG_DMADEV
> -	help
> -	  Enable EXYNOS4412 SoC support
> -
>  config SOC_EXYNOS5250
>  	bool "SAMSUNG EXYNOS5250"
>  	default y
> diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-
> samsung/include/plat/cpu.h
> index 989fefe..87b03bb 100644
> --- a/arch/arm/plat-samsung/include/plat/cpu.h
> +++ b/arch/arm/plat-samsung/include/plat/cpu.h
> @@ -122,13 +122,9 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID,
> EXYNOS5_SOC_MASK)
> 
>  #if defined(CONFIG_SOC_EXYNOS4212)
>  # define soc_is_exynos4212()	is_samsung_exynos4212()
> -#else
> -# define soc_is_exynos4212()	0
> -#endif
> -
> -#if defined(CONFIG_SOC_EXYNOS4412)
>  # define soc_is_exynos4412()	is_samsung_exynos4412()
>  #else
> +# define soc_is_exynos4212()	0
>  # define soc_is_exynos4412()	0
>  #endif
> 
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index a924408..b214ad6 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -32,7 +32,7 @@ config ARM_EXYNOS4210_CPUFREQ
>  	  SoC (S5PV310 or S5PC210).
> 
>  config ARM_EXYNOS4X12_CPUFREQ
> -	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
> +	def_bool SOC_EXYNOS4212
>  	help
>  	  This adds the CPUFreq driver for Samsung EXYNOS4X12
>  	  SoC (EXYNOS4212 or EXYNOS4412).
> diff --git a/drivers/media/platform/exynos4-is/Kconfig
> b/drivers/media/platform/exynos4-is/Kconfig
> index 6ff99b5..f483e11 100644
> --- a/drivers/media/platform/exynos4-is/Kconfig
> +++ b/drivers/media/platform/exynos4-is/Kconfig
> @@ -32,7 +32,7 @@ config VIDEO_S5P_MIPI_CSIS
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called s5p-csis.
> 
> -if SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250
> +if SOC_EXYNOS4212 || SOC_EXYNOS5250
> 
>  config VIDEO_EXYNOS_FIMC_LITE
>  	tristate "EXYNOS FIMC-LITE camera interface driver"
> diff --git a/drivers/thermal/exynos_thermal.c
> b/drivers/thermal/exynos_thermal.c
> index 788b1dd..f88a2ad 100644
> --- a/drivers/thermal/exynos_thermal.c
> +++ b/drivers/thermal/exynos_thermal.c
> @@ -817,7 +817,7 @@ static struct exynos_tmu_platform_data const
> exynos4210_default_tmu_data = {
>  #define EXYNOS4210_TMU_DRV_DATA (NULL)
>  #endif
> 
> -#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
> +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4212)
>  static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
>  	.threshold_falling = 10,
>  	.trigger_levels[0] = 85,
> diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
> index 0c8a9fa..eeb8ecb 100644
> --- a/drivers/tty/serial/samsung.c
> +++ b/drivers/tty/serial/samsung.c
> @@ -1714,8 +1714,7 @@ static struct s3c24xx_serial_drv_data
> s5pv210_serial_drv_data = {
>  #endif
> 
>  #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \
> -	defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) ||
> \
> -	defined(CONFIG_SOC_EXYNOS5440)
> +	defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS5440)
>  static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
>  	.info = &(struct s3c24xx_uart_info) {
>  		.name		= "Samsung Exynos4 UART",
> --
> 1.8.2.1

Hmm, how about SOC_EXYNOS4X12 for exynos4212 and exynos4412?

BTW, AFAIK, we need to leave both to support something...I need to check :)

- Kukjin

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tomasz Figa June 15, 2013, 12:11 p.m. UTC | #2 
On Saturday 15 of June 2013 11:15:51 Kukjin Kim wrote:
> Tomasz Figa wrote:
> > Exynos4212 and Exynos4412 SoCs differ only in number of ARM cores and
> > there is no need to have separate Kconfig options for them, since they
> > use the same code.
> > 
> > This patch removes CONFIG_SOC_EXYNOS4412, leaving
> > CONFIG_SOC_EXYNOS4212
> > as the one supporting both SoCs from this series.
> > 
> > Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> > Cc: Viresh Kumar <viresh.kumar@linaro.org>
> > Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
> > Cc: Zhang Rui <rui.zhang@intel.com>
> > Cc: Eduardo Valentin <eduardo.valentin@ti.com>
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Cc: cpufreq@vger.kernel.org
> > Cc: linux-pm@vger.kernel.org
> > Cc: linux-media@vger.kernel.org
> > Cc: linux-serial@vger.kernel.org
> > Signed-off-by: Tomasz Figa <t.figa@samsung.com>
> > Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> > ---
> > 
> >  arch/arm/mach-exynos/Kconfig              | 11 +----------
> >  arch/arm/plat-samsung/include/plat/cpu.h  |  6 +-----
> >  drivers/cpufreq/Kconfig.arm               |  2 +-
> >  drivers/media/platform/exynos4-is/Kconfig |  2 +-
> >  drivers/thermal/exynos_thermal.c          |  2 +-
> >  drivers/tty/serial/samsung.c              |  3 +--
> >  6 files changed, 6 insertions(+), 20 deletions(-)
> > 
> > diff --git a/arch/arm/mach-exynos/Kconfig
> > b/arch/arm/mach-exynos/Kconfig index 47d8d9e..fe75a65 100644
> > --- a/arch/arm/mach-exynos/Kconfig
> > +++ b/arch/arm/mach-exynos/Kconfig
> > @@ -46,7 +46,7 @@ config CPU_EXYNOS4210
> > 
> >  	  Enable EXYNOS4210 CPU support
> >  
> >  config SOC_EXYNOS4212
> > 
> > -	bool "SAMSUNG EXYNOS4212"
> > +	bool "SAMSUNG EXYNOS4212/4412"
> > 
> >  	default y
> >  	depends on ARCH_EXYNOS4
> >  	select PINCTRL_EXYNOS
> > 
> > @@ -56,15 +56,6 @@ config SOC_EXYNOS4212
> > 
> >  	help
> >  	
> >  	  Enable EXYNOS4212 SoC support
> > 
> > -config SOC_EXYNOS4412
> > -	bool "SAMSUNG EXYNOS4412"
> > -	default y
> > -	depends on ARCH_EXYNOS4
> > -	select PINCTRL_EXYNOS
> > -	select SAMSUNG_DMADEV
> > -	help
> > -	  Enable EXYNOS4412 SoC support
> > -
> > 
> >  config SOC_EXYNOS5250
> >  
> >  	bool "SAMSUNG EXYNOS5250"
> >  	default y
> > 
> > diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-
> > samsung/include/plat/cpu.h
> > index 989fefe..87b03bb 100644
> > --- a/arch/arm/plat-samsung/include/plat/cpu.h
> > +++ b/arch/arm/plat-samsung/include/plat/cpu.h
> > @@ -122,13 +122,9 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID,
> > EXYNOS5_SOC_MASK)
> > 
> >  #if defined(CONFIG_SOC_EXYNOS4212)
> >  # define soc_is_exynos4212()	is_samsung_exynos4212()
> > 
> > -#else
> > -# define soc_is_exynos4212()	0
> > -#endif
> > -
> > -#if defined(CONFIG_SOC_EXYNOS4412)
> > 
> >  # define soc_is_exynos4412()	is_samsung_exynos4412()
> >  #else
> > 
> > +# define soc_is_exynos4212()	0
> > 
> >  # define soc_is_exynos4412()	0
> >  #endif
> > 
> > diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> > index a924408..b214ad6 100644
> > --- a/drivers/cpufreq/Kconfig.arm
> > +++ b/drivers/cpufreq/Kconfig.arm
> > @@ -32,7 +32,7 @@ config ARM_EXYNOS4210_CPUFREQ
> > 
> >  	  SoC (S5PV310 or S5PC210).
> >  
> >  config ARM_EXYNOS4X12_CPUFREQ
> > 
> > -	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
> > +	def_bool SOC_EXYNOS4212
> > 
> >  	help
> >  	
> >  	  This adds the CPUFreq driver for Samsung EXYNOS4X12
> >  	  SoC (EXYNOS4212 or EXYNOS4412).
> > 
> > diff --git a/drivers/media/platform/exynos4-is/Kconfig
> > b/drivers/media/platform/exynos4-is/Kconfig
> > index 6ff99b5..f483e11 100644
> > --- a/drivers/media/platform/exynos4-is/Kconfig
> > +++ b/drivers/media/platform/exynos4-is/Kconfig
> > @@ -32,7 +32,7 @@ config VIDEO_S5P_MIPI_CSIS
> > 
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called s5p-csis.
> > 
> > -if SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250
> > +if SOC_EXYNOS4212 || SOC_EXYNOS5250
> > 
> >  config VIDEO_EXYNOS_FIMC_LITE
> >  
> >  	tristate "EXYNOS FIMC-LITE camera interface driver"
> > 
> > diff --git a/drivers/thermal/exynos_thermal.c
> > b/drivers/thermal/exynos_thermal.c
> > index 788b1dd..f88a2ad 100644
> > --- a/drivers/thermal/exynos_thermal.c
> > +++ b/drivers/thermal/exynos_thermal.c
> > @@ -817,7 +817,7 @@ static struct exynos_tmu_platform_data const
> > exynos4210_default_tmu_data = {
> > 
> >  #define EXYNOS4210_TMU_DRV_DATA (NULL)
> >  #endif
> > 
> > -#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
> > +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4212)
> > 
> >  static struct exynos_tmu_platform_data const exynos_default_tmu_data
> >  = {>  
> >  	.threshold_falling = 10,
> >  	.trigger_levels[0] = 85,
> > 
> > diff --git a/drivers/tty/serial/samsung.c
> > b/drivers/tty/serial/samsung.c index 0c8a9fa..eeb8ecb 100644
> > --- a/drivers/tty/serial/samsung.c
> > +++ b/drivers/tty/serial/samsung.c
> > @@ -1714,8 +1714,7 @@ static struct s3c24xx_serial_drv_data
> > s5pv210_serial_drv_data = {
> > 
> >  #endif
> >  
> >  #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212)
> >  || \> 
> > -	defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) 
||
> > \
> > -	defined(CONFIG_SOC_EXYNOS5440)
> > +	defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS5440)
> > 
> >  static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
> >  
> >  	.info = &(struct s3c24xx_uart_info) {
> >  	
> >  		.name		= "Samsung Exynos4 UART",
> > 
> > --
> > 1.8.2.1
> 
> Hmm, how about SOC_EXYNOS4X12 for exynos4212 and exynos4412?

I was thinking about it and finally decided to leave SOC_EXYNOS4212 for 
compatibility reasons - you don't need to change SOC_EXYNOS4212 to 
SOC_EXYNOS4X12 wherever it's used, making it possible to apply some older 
out of tree patches without modification.

> BTW, AFAIK, we need to leave both to support something...I need to check
> :)

OK.

But IMHO, now with DeviceTree, there is usually no need for such level of 
differentiation on config level.

For example we might be even able reduce CPU_EXYNOS4210 and SOC_EXYNOS4212 
to just ARCH_EXYNOS4, because they share almost all the code and all the 
differencies are specified in device tree.

Best regards,
Tomasz

> - Kukjin
> 
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-samsung-soc" in the body of a message to
> majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Eduardo Valentin June 15, 2013, 2:06 p.m. UTC | #3 
Tomasz,

On 14-06-2013 15:33, Tomasz Figa wrote:
> Exynos4212 and Exynos4412 SoCs differ only in number of ARM cores and
> there is no need to have separate Kconfig options for them, since they
> use the same code.
> 
> This patch removes CONFIG_SOC_EXYNOS4412, leaving CONFIG_SOC_EXYNOS4212
> as the one supporting both SoCs from this series.
> 
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <eduardo.valentin@ti.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: cpufreq@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: linux-serial@vger.kernel.org
> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
>  arch/arm/mach-exynos/Kconfig              | 11 +----------
>  arch/arm/plat-samsung/include/plat/cpu.h  |  6 +-----
>  drivers/cpufreq/Kconfig.arm               |  2 +-
>  drivers/media/platform/exynos4-is/Kconfig |  2 +-
>  drivers/thermal/exynos_thermal.c          |  2 +-
>  drivers/tty/serial/samsung.c              |  3 +--
>  6 files changed, 6 insertions(+), 20 deletions(-)


Not for the matter of the change itself, but just for simplicity while
merging when the change is agreed to be good, it is recommended that you
split your changes in different smaller patches, specially because you
are touching several parts of the kernel that belong to different trees.
If one merges your change the way it is, it is likely to create merge
conflicts.


> 
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index 47d8d9e..fe75a65 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -46,7 +46,7 @@ config CPU_EXYNOS4210
>  	  Enable EXYNOS4210 CPU support
>  
>  config SOC_EXYNOS4212
> -	bool "SAMSUNG EXYNOS4212"
> +	bool "SAMSUNG EXYNOS4212/4412"
>  	default y
>  	depends on ARCH_EXYNOS4
>  	select PINCTRL_EXYNOS
> @@ -56,15 +56,6 @@ config SOC_EXYNOS4212
>  	help
>  	  Enable EXYNOS4212 SoC support
>  
> -config SOC_EXYNOS4412
> -	bool "SAMSUNG EXYNOS4412"
> -	default y
> -	depends on ARCH_EXYNOS4
> -	select PINCTRL_EXYNOS
> -	select SAMSUNG_DMADEV
> -	help
> -	  Enable EXYNOS4412 SoC support
> -
>  config SOC_EXYNOS5250
>  	bool "SAMSUNG EXYNOS5250"
>  	default y
> diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
> index 989fefe..87b03bb 100644
> --- a/arch/arm/plat-samsung/include/plat/cpu.h
> +++ b/arch/arm/plat-samsung/include/plat/cpu.h
> @@ -122,13 +122,9 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
>  
>  #if defined(CONFIG_SOC_EXYNOS4212)
>  # define soc_is_exynos4212()	is_samsung_exynos4212()
> -#else
> -# define soc_is_exynos4212()	0
> -#endif
> -
> -#if defined(CONFIG_SOC_EXYNOS4412)
>  # define soc_is_exynos4412()	is_samsung_exynos4412()
>  #else
> +# define soc_is_exynos4212()	0
>  # define soc_is_exynos4412()	0
>  #endif
>  
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index a924408..b214ad6 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -32,7 +32,7 @@ config ARM_EXYNOS4210_CPUFREQ
>  	  SoC (S5PV310 or S5PC210).
>  
>  config ARM_EXYNOS4X12_CPUFREQ
> -	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
> +	def_bool SOC_EXYNOS4212
>  	help
>  	  This adds the CPUFreq driver for Samsung EXYNOS4X12
>  	  SoC (EXYNOS4212 or EXYNOS4412).
> diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
> index 6ff99b5..f483e11 100644
> --- a/drivers/media/platform/exynos4-is/Kconfig
> +++ b/drivers/media/platform/exynos4-is/Kconfig
> @@ -32,7 +32,7 @@ config VIDEO_S5P_MIPI_CSIS
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called s5p-csis.
>  
> -if SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250
> +if SOC_EXYNOS4212 || SOC_EXYNOS5250
>  
>  config VIDEO_EXYNOS_FIMC_LITE
>  	tristate "EXYNOS FIMC-LITE camera interface driver"
> diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
> index 788b1dd..f88a2ad 100644
> --- a/drivers/thermal/exynos_thermal.c
> +++ b/drivers/thermal/exynos_thermal.c
> @@ -817,7 +817,7 @@ static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
>  #define EXYNOS4210_TMU_DRV_DATA (NULL)
>  #endif
>  
> -#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
> +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4212)
>  static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
>  	.threshold_falling = 10,
>  	.trigger_levels[0] = 85,
> diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
> index 0c8a9fa..eeb8ecb 100644
> --- a/drivers/tty/serial/samsung.c
> +++ b/drivers/tty/serial/samsung.c
> @@ -1714,8 +1714,7 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
>  #endif
>  
>  #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \
> -	defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) || \
> -	defined(CONFIG_SOC_EXYNOS5440)
> +	defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS5440)
>  static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
>  	.info = &(struct s3c24xx_uart_info) {
>  		.name		= "Samsung Exynos4 UART",
>
Tomasz Figa June 15, 2013, 2:39 p.m. UTC | #4 
On Saturday 15 of June 2013 10:06:25 Eduardo Valentin wrote:
> Tomasz,
> 
> On 14-06-2013 15:33, Tomasz Figa wrote:
> > Exynos4212 and Exynos4412 SoCs differ only in number of ARM cores and
> > there is no need to have separate Kconfig options for them, since they
> > use the same code.
> > 
> > This patch removes CONFIG_SOC_EXYNOS4412, leaving
> > CONFIG_SOC_EXYNOS4212
> > as the one supporting both SoCs from this series.
> > 
> > Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> > Cc: Viresh Kumar <viresh.kumar@linaro.org>
> > Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
> > Cc: Zhang Rui <rui.zhang@intel.com>
> > Cc: Eduardo Valentin <eduardo.valentin@ti.com>
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Cc: cpufreq@vger.kernel.org
> > Cc: linux-pm@vger.kernel.org
> > Cc: linux-media@vger.kernel.org
> > Cc: linux-serial@vger.kernel.org
> > Signed-off-by: Tomasz Figa <t.figa@samsung.com>
> > Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> > ---
> > 
> >  arch/arm/mach-exynos/Kconfig              | 11 +----------
> >  arch/arm/plat-samsung/include/plat/cpu.h  |  6 +-----
> >  drivers/cpufreq/Kconfig.arm               |  2 +-
> >  drivers/media/platform/exynos4-is/Kconfig |  2 +-
> >  drivers/thermal/exynos_thermal.c          |  2 +-
> >  drivers/tty/serial/samsung.c              |  3 +--
> >  6 files changed, 6 insertions(+), 20 deletions(-)
> 
> Not for the matter of the change itself, but just for simplicity while
> merging when the change is agreed to be good, it is recommended that you
> split your changes in different smaller patches, specially because you
> are touching several parts of the kernel that belong to different
> trees. If one merges your change the way it is, it is likely to create
> merge conflicts.

Right. Let me split this patch.

Best regards,
Tomasz

> > diff --git a/arch/arm/mach-exynos/Kconfig
> > b/arch/arm/mach-exynos/Kconfig index 47d8d9e..fe75a65 100644
> > --- a/arch/arm/mach-exynos/Kconfig
> > +++ b/arch/arm/mach-exynos/Kconfig
> > @@ -46,7 +46,7 @@ config CPU_EXYNOS4210
> > 
> >  	  Enable EXYNOS4210 CPU support
> >  
> >  config SOC_EXYNOS4212
> > 
> > -	bool "SAMSUNG EXYNOS4212"
> > +	bool "SAMSUNG EXYNOS4212/4412"
> > 
> >  	default y
> >  	depends on ARCH_EXYNOS4
> >  	select PINCTRL_EXYNOS
> > 
> > @@ -56,15 +56,6 @@ config SOC_EXYNOS4212
> > 
> >  	help
> >  	
> >  	  Enable EXYNOS4212 SoC support
> > 
> > -config SOC_EXYNOS4412
> > -	bool "SAMSUNG EXYNOS4412"
> > -	default y
> > -	depends on ARCH_EXYNOS4
> > -	select PINCTRL_EXYNOS
> > -	select SAMSUNG_DMADEV
> > -	help
> > -	  Enable EXYNOS4412 SoC support
> > -
> > 
> >  config SOC_EXYNOS5250
> >  
> >  	bool "SAMSUNG EXYNOS5250"
> >  	default y
> > 
> > diff --git a/arch/arm/plat-samsung/include/plat/cpu.h
> > b/arch/arm/plat-samsung/include/plat/cpu.h index 989fefe..87b03bb
> > 100644
> > --- a/arch/arm/plat-samsung/include/plat/cpu.h
> > +++ b/arch/arm/plat-samsung/include/plat/cpu.h
> > @@ -122,13 +122,9 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID,
> > EXYNOS5_SOC_MASK)> 
> >  #if defined(CONFIG_SOC_EXYNOS4212)
> >  # define soc_is_exynos4212()	is_samsung_exynos4212()
> > 
> > -#else
> > -# define soc_is_exynos4212()	0
> > -#endif
> > -
> > -#if defined(CONFIG_SOC_EXYNOS4412)
> > 
> >  # define soc_is_exynos4412()	is_samsung_exynos4412()
> >  #else
> > 
> > +# define soc_is_exynos4212()	0
> > 
> >  # define soc_is_exynos4412()	0
> >  #endif
> > 
> > diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> > index a924408..b214ad6 100644
> > --- a/drivers/cpufreq/Kconfig.arm
> > +++ b/drivers/cpufreq/Kconfig.arm
> > @@ -32,7 +32,7 @@ config ARM_EXYNOS4210_CPUFREQ
> > 
> >  	  SoC (S5PV310 or S5PC210).
> >  
> >  config ARM_EXYNOS4X12_CPUFREQ
> > 
> > -	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
> > +	def_bool SOC_EXYNOS4212
> > 
> >  	help
> >  	
> >  	  This adds the CPUFreq driver for Samsung EXYNOS4X12
> >  	  SoC (EXYNOS4212 or EXYNOS4412).
> > 
> > diff --git a/drivers/media/platform/exynos4-is/Kconfig
> > b/drivers/media/platform/exynos4-is/Kconfig index 6ff99b5..f483e11
> > 100644
> > --- a/drivers/media/platform/exynos4-is/Kconfig
> > +++ b/drivers/media/platform/exynos4-is/Kconfig
> > @@ -32,7 +32,7 @@ config VIDEO_S5P_MIPI_CSIS
> > 
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called s5p-csis.
> > 
> > -if SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250
> > +if SOC_EXYNOS4212 || SOC_EXYNOS5250
> > 
> >  config VIDEO_EXYNOS_FIMC_LITE
> >  
> >  	tristate "EXYNOS FIMC-LITE camera interface driver"
> > 
> > diff --git a/drivers/thermal/exynos_thermal.c
> > b/drivers/thermal/exynos_thermal.c index 788b1dd..f88a2ad 100644
> > --- a/drivers/thermal/exynos_thermal.c
> > +++ b/drivers/thermal/exynos_thermal.c
> > @@ -817,7 +817,7 @@ static struct exynos_tmu_platform_data const
> > exynos4210_default_tmu_data = {> 
> >  #define EXYNOS4210_TMU_DRV_DATA (NULL)
> >  #endif
> > 
> > -#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
> > +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4212)
> > 
> >  static struct exynos_tmu_platform_data const exynos_default_tmu_data
> >  = {>  
> >  	.threshold_falling = 10,
> >  	.trigger_levels[0] = 85,
> > 
> > diff --git a/drivers/tty/serial/samsung.c
> > b/drivers/tty/serial/samsung.c index 0c8a9fa..eeb8ecb 100644
> > --- a/drivers/tty/serial/samsung.c
> > +++ b/drivers/tty/serial/samsung.c
> > @@ -1714,8 +1714,7 @@ static struct s3c24xx_serial_drv_data
> > s5pv210_serial_drv_data = {> 
> >  #endif
> >  
> >  #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212)
> >  || \> 
> > -	defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) 
||
> > \
> > -	defined(CONFIG_SOC_EXYNOS5440)
> > +	defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS5440)
> > 
> >  static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
> >  
> >  	.info = &(struct s3c24xx_uart_info) {
> >  	
> >  		.name		= "Samsung Exynos4 UART",
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 47d8d9e..fe75a65 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -46,7 +46,7 @@  config CPU_EXYNOS4210
 	  Enable EXYNOS4210 CPU support
 
 config SOC_EXYNOS4212
-	bool "SAMSUNG EXYNOS4212"
+	bool "SAMSUNG EXYNOS4212/4412"
 	default y
 	depends on ARCH_EXYNOS4
 	select PINCTRL_EXYNOS
@@ -56,15 +56,6 @@  config SOC_EXYNOS4212
 	help
 	  Enable EXYNOS4212 SoC support
 
-config SOC_EXYNOS4412
-	bool "SAMSUNG EXYNOS4412"
-	default y
-	depends on ARCH_EXYNOS4
-	select PINCTRL_EXYNOS
-	select SAMSUNG_DMADEV
-	help
-	  Enable EXYNOS4412 SoC support
-
 config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 989fefe..87b03bb 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -122,13 +122,9 @@  IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 
 #if defined(CONFIG_SOC_EXYNOS4212)
 # define soc_is_exynos4212()	is_samsung_exynos4212()
-#else
-# define soc_is_exynos4212()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4412)
 # define soc_is_exynos4412()	is_samsung_exynos4412()
 #else
+# define soc_is_exynos4212()	0
 # define soc_is_exynos4412()	0
 #endif
 
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index a924408..b214ad6 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -32,7 +32,7 @@  config ARM_EXYNOS4210_CPUFREQ
 	  SoC (S5PV310 or S5PC210).
 
 config ARM_EXYNOS4X12_CPUFREQ
-	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
+	def_bool SOC_EXYNOS4212
 	help
 	  This adds the CPUFreq driver for Samsung EXYNOS4X12
 	  SoC (EXYNOS4212 or EXYNOS4412).
diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
index 6ff99b5..f483e11 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -32,7 +32,7 @@  config VIDEO_S5P_MIPI_CSIS
 	  To compile this driver as a module, choose M here: the
 	  module will be called s5p-csis.
 
-if SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250
+if SOC_EXYNOS4212 || SOC_EXYNOS5250
 
 config VIDEO_EXYNOS_FIMC_LITE
 	tristate "EXYNOS FIMC-LITE camera interface driver"
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
index 788b1dd..f88a2ad 100644
--- a/drivers/thermal/exynos_thermal.c
+++ b/drivers/thermal/exynos_thermal.c
@@ -817,7 +817,7 @@  static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
 #define EXYNOS4210_TMU_DRV_DATA (NULL)
 #endif
 
-#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
+#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4212)
 static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
 	.threshold_falling = 10,
 	.trigger_levels[0] = 85,
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 0c8a9fa..eeb8ecb 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1714,8 +1714,7 @@  static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
 #endif
 
 #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \
-	defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) || \
-	defined(CONFIG_SOC_EXYNOS5440)
+	defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS5440)
 static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
 	.info = &(struct s3c24xx_uart_info) {
 		.name		= "Samsung Exynos4 UART",