| Message ID | 1372071051-3167-17-git-send-email-amit.daniel@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 24-06-2013 06:50, Amit Daniel Kachhap wrote: > This code simplifies the zone handling to use the trip information passed > by the TMU driver and not the hardcoded macros. This also helps in adding > more zone support. > > Acked-by: Kukjin Kim <kgene.kim@samsung.com> > Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > --- > drivers/thermal/samsung/exynos_thermal_common.c | 67 ++++++++++++++--------- > drivers/thermal/samsung/exynos_thermal_common.h | 3 +- > drivers/thermal/samsung/exynos_tmu.c | 5 ++- > 3 files changed, 47 insertions(+), 28 deletions(-) > > diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c > index 99318e5..ecf95da 100644 > --- a/drivers/thermal/samsung/exynos_thermal_common.c > +++ b/drivers/thermal/samsung/exynos_thermal_common.c > @@ -79,17 +79,24 @@ static int exynos_set_mode(struct thermal_zone_device *thermal, > static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip, > enum thermal_trip_type *type) > { > - switch (GET_ZONE(trip)) { > - case MONITOR_ZONE: > - case WARN_ZONE: > - *type = THERMAL_TRIP_ACTIVE; > - break; > - case PANIC_ZONE: > + struct exynos_thermal_zone *th_zone = thermal->devdata; > + int max_trip = th_zone->sensor_conf->trip_data.trip_count; > + int trip_type; > + > + if (trip < 0 || trip >= max_trip) > + return -EINVAL; > + > + trip_type = th_zone->sensor_conf->trip_data.trip_type[trip]; > + > + if (trip_type == SW_TRIP) > *type = THERMAL_TRIP_CRITICAL; > - break; > - default: > + else if (trip_type == THROTTLE_ACTIVE) > + *type = THERMAL_TRIP_ACTIVE; > + else if (trip_type == THROTTLE_PASSIVE) > + *type = THERMAL_TRIP_PASSIVE; > + else > return -EINVAL; > - } > + > return 0; > } > > @@ -98,8 +105,9 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, > unsigned long *temp) > { > struct exynos_thermal_zone *th_zone = thermal->devdata; > + int max_trip = th_zone->sensor_conf->trip_data.trip_count; > > - if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE)) > + if (trip < 0 || trip >= max_trip) > return -EINVAL; > > *temp = th_zone->sensor_conf->trip_data.trip_val[trip]; > @@ -113,10 +121,10 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, > static int exynos_get_crit_temp(struct thermal_zone_device *thermal, > unsigned long *temp) > { > - int ret; > - /* Panic zone */ > - ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp); > - return ret; > + struct exynos_thermal_zone *th_zone = thermal->devdata; > + int max_trip = th_zone->sensor_conf->trip_data.trip_count; > + /* Get the temp of highest trip*/ > + return exynos_get_trip_temp(thermal, max_trip - 1, temp); > } > > /* Bind callback functions for thermal zone */ > @@ -348,19 +356,28 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) > return -ENOMEM; > > th_zone->sensor_conf = sensor_conf; > - cpumask_set_cpu(0, &mask_val); > - th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); > - if (IS_ERR(th_zone->cool_dev[0])) { > - pr_err("Failed to register cpufreq cooling device\n"); > - ret = -EINVAL; > - goto err_unregister; > + /* > + * TODO: 1) Handle multiple cooling devices in a thermal zone > + * 2) Add a flag/name in cooling info to map to specific > + * sensor > + */ > + if (sensor_conf->cooling_data.freq_clip_count > 0) { > + cpumask_set_cpu(0, &mask_val); > + th_zone->cool_dev[th_zone->cool_dev_size] = > + cpufreq_cooling_register(&mask_val); > + if (IS_ERR(th_zone->cool_dev[0])) { If you assign to 'th_zone->cool_dev[th_zone->cool_dev_size]', you have to check against the same, not against th_zone->cool_dev[0]. > + pr_err("Failed to register cpufreq cooling device\n"); > + ret = -EINVAL; > + goto err_unregister; > + } > + th_zone->cool_dev_size++; > } > - th_zone->cool_dev_size++; > > - th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name, > - EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0, > - sensor_conf->trip_data.trigger_falling ? > - 0 : IDLE_INTERVAL); > + th_zone->therm_dev = thermal_zone_device_register( > + sensor_conf->name, sensor_conf->trip_data.trip_count, > + 0, th_zone, &exynos_dev_ops, NULL, 0, > + sensor_conf->trip_data.trigger_falling ? 0 : > + IDLE_INTERVAL); > > if (IS_ERR(th_zone->therm_dev)) { > pr_err("Failed to register thermal zone device\n"); > diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h > index 6ca3096..bfcf69e 100644 > --- a/drivers/thermal/samsung/exynos_thermal_common.h > +++ b/drivers/thermal/samsung/exynos_thermal_common.h > @@ -42,8 +42,6 @@ > #define GET_ZONE(trip) (trip + 2) > #define GET_TRIP(zone) (zone - 2) > > -#define EXYNOS_ZONE_COUNT 3 > - > enum trigger_type { > THROTTLE_ACTIVE = 1, > THROTTLE_PASSIVE, > @@ -69,6 +67,7 @@ struct freq_clip_table { > > struct thermal_trip_point_conf { > int trip_val[MAX_TRIP_COUNT]; > + int trip_type[MAX_TRIP_COUNT]; > int trip_count; > unsigned char trigger_falling; > }; > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index 40e0cfd..acbd295 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -509,9 +509,12 @@ static int exynos_tmu_probe(struct platform_device *pdev) > pdata->trigger_enable[1] + pdata->trigger_enable[2]+ > pdata->trigger_enable[3]; > > - for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) > + for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) { > exynos_sensor_conf.trip_data.trip_val[i] = > pdata->threshold + pdata->trigger_levels[i]; > + exynos_sensor_conf.trip_data.trip_type[i] = > + pdata->trigger_type[i]; > + } > > exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling; > >
On Mon, Jun 24, 2013 at 9:11 PM, Eduardo Valentin <eduardo.valentin@ti.com> wrote: > On 24-06-2013 06:50, Amit Daniel Kachhap wrote: >> This code simplifies the zone handling to use the trip information passed >> by the TMU driver and not the hardcoded macros. This also helps in adding >> more zone support. >> >> Acked-by: Kukjin Kim <kgene.kim@samsung.com> >> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> >> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >> --- >> drivers/thermal/samsung/exynos_thermal_common.c | 67 ++++++++++++++--------- >> drivers/thermal/samsung/exynos_thermal_common.h | 3 +- >> drivers/thermal/samsung/exynos_tmu.c | 5 ++- >> 3 files changed, 47 insertions(+), 28 deletions(-) >> >> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c >> index 99318e5..ecf95da 100644 >> --- a/drivers/thermal/samsung/exynos_thermal_common.c >> +++ b/drivers/thermal/samsung/exynos_thermal_common.c >> @@ -79,17 +79,24 @@ static int exynos_set_mode(struct thermal_zone_device *thermal, >> static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip, >> enum thermal_trip_type *type) >> { >> - switch (GET_ZONE(trip)) { >> - case MONITOR_ZONE: >> - case WARN_ZONE: >> - *type = THERMAL_TRIP_ACTIVE; >> - break; >> - case PANIC_ZONE: >> + struct exynos_thermal_zone *th_zone = thermal->devdata; >> + int max_trip = th_zone->sensor_conf->trip_data.trip_count; >> + int trip_type; >> + >> + if (trip < 0 || trip >= max_trip) >> + return -EINVAL; >> + >> + trip_type = th_zone->sensor_conf->trip_data.trip_type[trip]; >> + >> + if (trip_type == SW_TRIP) >> *type = THERMAL_TRIP_CRITICAL; >> - break; >> - default: >> + else if (trip_type == THROTTLE_ACTIVE) >> + *type = THERMAL_TRIP_ACTIVE; >> + else if (trip_type == THROTTLE_PASSIVE) >> + *type = THERMAL_TRIP_PASSIVE; >> + else >> return -EINVAL; >> - } >> + >> return 0; >> } >> >> @@ -98,8 +105,9 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, >> unsigned long *temp) >> { >> struct exynos_thermal_zone *th_zone = thermal->devdata; >> + int max_trip = th_zone->sensor_conf->trip_data.trip_count; >> >> - if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE)) >> + if (trip < 0 || trip >= max_trip) >> return -EINVAL; >> >> *temp = th_zone->sensor_conf->trip_data.trip_val[trip]; >> @@ -113,10 +121,10 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, >> static int exynos_get_crit_temp(struct thermal_zone_device *thermal, >> unsigned long *temp) >> { >> - int ret; >> - /* Panic zone */ >> - ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp); >> - return ret; >> + struct exynos_thermal_zone *th_zone = thermal->devdata; >> + int max_trip = th_zone->sensor_conf->trip_data.trip_count; >> + /* Get the temp of highest trip*/ >> + return exynos_get_trip_temp(thermal, max_trip - 1, temp); >> } >> >> /* Bind callback functions for thermal zone */ >> @@ -348,19 +356,28 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) >> return -ENOMEM; >> >> th_zone->sensor_conf = sensor_conf; >> - cpumask_set_cpu(0, &mask_val); >> - th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); >> - if (IS_ERR(th_zone->cool_dev[0])) { >> - pr_err("Failed to register cpufreq cooling device\n"); >> - ret = -EINVAL; >> - goto err_unregister; >> + /* >> + * TODO: 1) Handle multiple cooling devices in a thermal zone >> + * 2) Add a flag/name in cooling info to map to specific >> + * sensor >> + */ >> + if (sensor_conf->cooling_data.freq_clip_count > 0) { >> + cpumask_set_cpu(0, &mask_val); >> + th_zone->cool_dev[th_zone->cool_dev_size] = >> + cpufreq_cooling_register(&mask_val); >> + if (IS_ERR(th_zone->cool_dev[0])) { > > If you assign to 'th_zone->cool_dev[th_zone->cool_dev_size]', you have > to check against the same, not against th_zone->cool_dev[0]. Right. My mistake. Will re-send this patch > >> + pr_err("Failed to register cpufreq cooling device\n"); >> + ret = -EINVAL; >> + goto err_unregister; >> + } >> + th_zone->cool_dev_size++; >> } >> - th_zone->cool_dev_size++; >> >> - th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name, >> - EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0, >> - sensor_conf->trip_data.trigger_falling ? >> - 0 : IDLE_INTERVAL); >> + th_zone->therm_dev = thermal_zone_device_register( >> + sensor_conf->name, sensor_conf->trip_data.trip_count, >> + 0, th_zone, &exynos_dev_ops, NULL, 0, >> + sensor_conf->trip_data.trigger_falling ? 0 : >> + IDLE_INTERVAL); >> >> if (IS_ERR(th_zone->therm_dev)) { >> pr_err("Failed to register thermal zone device\n"); >> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h >> index 6ca3096..bfcf69e 100644 >> --- a/drivers/thermal/samsung/exynos_thermal_common.h >> +++ b/drivers/thermal/samsung/exynos_thermal_common.h >> @@ -42,8 +42,6 @@ >> #define GET_ZONE(trip) (trip + 2) >> #define GET_TRIP(zone) (zone - 2) >> >> -#define EXYNOS_ZONE_COUNT 3 >> - >> enum trigger_type { >> THROTTLE_ACTIVE = 1, >> THROTTLE_PASSIVE, >> @@ -69,6 +67,7 @@ struct freq_clip_table { >> >> struct thermal_trip_point_conf { >> int trip_val[MAX_TRIP_COUNT]; >> + int trip_type[MAX_TRIP_COUNT]; >> int trip_count; >> unsigned char trigger_falling; >> }; >> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c >> index 40e0cfd..acbd295 100644 >> --- a/drivers/thermal/samsung/exynos_tmu.c >> +++ b/drivers/thermal/samsung/exynos_tmu.c >> @@ -509,9 +509,12 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> pdata->trigger_enable[1] + pdata->trigger_enable[2]+ >> pdata->trigger_enable[3]; >> >> - for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) >> + for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) { >> exynos_sensor_conf.trip_data.trip_val[i] = >> pdata->threshold + pdata->trigger_levels[i]; >> + exynos_sensor_conf.trip_data.trip_type[i] = >> + pdata->trigger_type[i]; >> + } >> >> exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling; >> >> > > > -- > You have got to be excited about what you are doing. (L. Lamport) > > Eduardo Valentin > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c index 99318e5..ecf95da 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.c +++ b/drivers/thermal/samsung/exynos_thermal_common.c @@ -79,17 +79,24 @@ static int exynos_set_mode(struct thermal_zone_device *thermal, static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip, enum thermal_trip_type *type) { - switch (GET_ZONE(trip)) { - case MONITOR_ZONE: - case WARN_ZONE: - *type = THERMAL_TRIP_ACTIVE; - break; - case PANIC_ZONE: + struct exynos_thermal_zone *th_zone = thermal->devdata; + int max_trip = th_zone->sensor_conf->trip_data.trip_count; + int trip_type; + + if (trip < 0 || trip >= max_trip) + return -EINVAL; + + trip_type = th_zone->sensor_conf->trip_data.trip_type[trip]; + + if (trip_type == SW_TRIP) *type = THERMAL_TRIP_CRITICAL; - break; - default: + else if (trip_type == THROTTLE_ACTIVE) + *type = THERMAL_TRIP_ACTIVE; + else if (trip_type == THROTTLE_PASSIVE) + *type = THERMAL_TRIP_PASSIVE; + else return -EINVAL; - } + return 0; } @@ -98,8 +105,9 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, unsigned long *temp) { struct exynos_thermal_zone *th_zone = thermal->devdata; + int max_trip = th_zone->sensor_conf->trip_data.trip_count; - if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE)) + if (trip < 0 || trip >= max_trip) return -EINVAL; *temp = th_zone->sensor_conf->trip_data.trip_val[trip]; @@ -113,10 +121,10 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, static int exynos_get_crit_temp(struct thermal_zone_device *thermal, unsigned long *temp) { - int ret; - /* Panic zone */ - ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp); - return ret; + struct exynos_thermal_zone *th_zone = thermal->devdata; + int max_trip = th_zone->sensor_conf->trip_data.trip_count; + /* Get the temp of highest trip*/ + return exynos_get_trip_temp(thermal, max_trip - 1, temp); } /* Bind callback functions for thermal zone */ @@ -348,19 +356,28 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) return -ENOMEM; th_zone->sensor_conf = sensor_conf; - cpumask_set_cpu(0, &mask_val); - th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); - if (IS_ERR(th_zone->cool_dev[0])) { - pr_err("Failed to register cpufreq cooling device\n"); - ret = -EINVAL; - goto err_unregister; + /* + * TODO: 1) Handle multiple cooling devices in a thermal zone + * 2) Add a flag/name in cooling info to map to specific + * sensor + */ + if (sensor_conf->cooling_data.freq_clip_count > 0) { + cpumask_set_cpu(0, &mask_val); + th_zone->cool_dev[th_zone->cool_dev_size] = + cpufreq_cooling_register(&mask_val); + if (IS_ERR(th_zone->cool_dev[0])) { + pr_err("Failed to register cpufreq cooling device\n"); + ret = -EINVAL; + goto err_unregister; + } + th_zone->cool_dev_size++; } - th_zone->cool_dev_size++; - th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name, - EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0, - sensor_conf->trip_data.trigger_falling ? - 0 : IDLE_INTERVAL); + th_zone->therm_dev = thermal_zone_device_register( + sensor_conf->name, sensor_conf->trip_data.trip_count, + 0, th_zone, &exynos_dev_ops, NULL, 0, + sensor_conf->trip_data.trigger_falling ? 0 : + IDLE_INTERVAL); if (IS_ERR(th_zone->therm_dev)) { pr_err("Failed to register thermal zone device\n"); diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h index 6ca3096..bfcf69e 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.h +++ b/drivers/thermal/samsung/exynos_thermal_common.h @@ -42,8 +42,6 @@ #define GET_ZONE(trip) (trip + 2) #define GET_TRIP(zone) (zone - 2) -#define EXYNOS_ZONE_COUNT 3 - enum trigger_type { THROTTLE_ACTIVE = 1, THROTTLE_PASSIVE, @@ -69,6 +67,7 @@ struct freq_clip_table { struct thermal_trip_point_conf { int trip_val[MAX_TRIP_COUNT]; + int trip_type[MAX_TRIP_COUNT]; int trip_count; unsigned char trigger_falling; }; diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 40e0cfd..acbd295 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -509,9 +509,12 @@ static int exynos_tmu_probe(struct platform_device *pdev) pdata->trigger_enable[1] + pdata->trigger_enable[2]+ pdata->trigger_enable[3]; - for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) + for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) { exynos_sensor_conf.trip_data.trip_val[i] = pdata->threshold + pdata->trigger_levels[i]; + exynos_sensor_conf.trip_data.trip_type[i] = + pdata->trigger_type[i]; + } exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;