diff mbox

[V7,23/30] thermal: exynos: Add thermal configuration data for exynos5440 TMU sensor

Message ID 1372071051-3167-24-git-send-email-amit.daniel@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Amit Kachhap June 24, 2013, 10:50 a.m. UTC 
This patch adds configuration data for exynos5440 soc. Also register
definations for the controller are added.

Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/samsung/exynos_tmu.c      |    4 ++
 drivers/thermal/samsung/exynos_tmu_data.c |   71 +++++++++++++++++++++++++++++
 drivers/thermal/samsung/exynos_tmu_data.h |    7 +++
 3 files changed, 82 insertions(+), 0 deletions(-)

Comments

Eduardo Valentin June 24, 2013, 4:37 p.m. UTC | #1 
On 24-06-2013 06:50, Amit Daniel Kachhap wrote:
> This patch adds configuration data for exynos5440 soc. Also register
> definations for the controller are added.
> 
> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>

Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>

> ---
>  drivers/thermal/samsung/exynos_tmu.c      |    4 ++
>  drivers/thermal/samsung/exynos_tmu_data.c |   71 +++++++++++++++++++++++++++++
>  drivers/thermal/samsung/exynos_tmu_data.h |    7 +++
>  3 files changed, 82 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 6bc86f6..651f460 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -456,6 +456,10 @@ static const struct of_device_id exynos_tmu_match[] = {
>  		.compatible = "samsung,exynos5250-tmu",
>  		.data = (void *)EXYNOS5250_TMU_DRV_DATA,
>  	},
> +	{
> +		.compatible = "samsung,exynos5440-tmu",
> +		.data = (void *)EXYNOS5440_TMU_DRV_DATA,
> +	},
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, exynos_tmu_match);
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
> index 2612b45..5952915 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> @@ -175,3 +175,74 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
>  	.tmu_count = 1,
>  };
>  #endif
> +
> +#if defined(CONFIG_SOC_EXYNOS5440)
> +static const struct exynos_tmu_registers exynos5440_tmu_registers = {
> +	.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
> +	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
> +	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
> +	.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
> +	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
> +	.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
> +	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
> +	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
> +	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
> +	.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
> +	.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
> +	.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
> +	.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
> +	.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
> +	.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
> +	.threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
> +	.threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
> +	.threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
> +	.tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
> +	.inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
> +	.inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
> +	.inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
> +	.inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
> +	.inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
> +	.inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
> +	.inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
> +	.inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
> +	.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
> +	.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
> +	.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
> +	.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
> +	.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
> +	.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
> +	.tmu_pmin = EXYNOS5440_TMU_PMIN,
> +};
> +
> +#define EXYNOS5440_TMU_DATA \
> +	.trigger_levels[0] = 100, \
> +	.trigger_levels[4] = 105, \
> +	.trigger_enable[0] = 1, \
> +	.trigger_type[0] = SW_TRIP, \
> +	.trigger_type[4] = HW_TRIP, \
> +	.max_trigger_level = 5, \
> +	.gain = 5, \
> +	.reference_voltage = 16, \
> +	.noise_cancel_mode = 4, \
> +	.cal_type = TYPE_ONE_POINT_TRIMMING, \
> +	.cal_mode = 0, \
> +	.efuse_value = 0x5b2d, \
> +	.min_efuse_value = 16, \
> +	.max_efuse_value = 76, \
> +	.first_point_trim = 25, \
> +	.second_point_trim = 70, \
> +	.default_temp_offset = 25, \
> +	.type = SOC_ARCH_EXYNOS5440, \
> +	.registers = &exynos5440_tmu_registers, \
> +	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
> +			TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY),
> +
> +struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
> +	.tmu_data = {
> +		{ EXYNOS5440_TMU_DATA } ,
> +		{ EXYNOS5440_TMU_DATA } ,
> +		{ EXYNOS5440_TMU_DATA } ,
> +	},
> +	.tmu_count = 3,
> +};
> +#endif
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> index ad263e9..43ce5fb 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> @@ -143,4 +143,11 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
>  #define EXYNOS5250_TMU_DRV_DATA (NULL)
>  #endif
>  
> +#if defined(CONFIG_SOC_EXYNOS5440)
> +extern struct exynos_tmu_init_data const exynos5440_default_tmu_data;
> +#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)
> +#else
> +#define EXYNOS5440_TMU_DRV_DATA (NULL)
> +#endif
> +
>  #endif /*_EXYNOS_TMU_DATA_H*/
>
??? June 26, 2013, 1:24 a.m. UTC | #2 
On Monday, June 24, 2013 7:51 PM, Amit Daniel Kachhap wrote:
>This patch adds configuration data for exynos5440 soc. Also register
>definations for the controller are added.
>
>Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
>Acked-by: Kukjin Kim <kgene.kim@samsung.com>
>Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>---
> drivers/thermal/samsung/exynos_tmu.c      |    4 ++
> drivers/thermal/samsung/exynos_tmu_data.c |   71 +++++++++++++++++++++++++++++
> drivers/thermal/samsung/exynos_tmu_data.h |    7 +++
> 3 files changed, 82 insertions(+), 0 deletions(-)
>
>diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>index 6bc86f6..651f460 100644
>--- a/drivers/thermal/samsung/exynos_tmu.c
>+++ b/drivers/thermal/samsung/exynos_tmu.c
>@@ -456,6 +456,10 @@ static const struct of_device_id exynos_tmu_match[] = {
> 		.compatible = "samsung,exynos5250-tmu",
> 		.data = (void *)EXYNOS5250_TMU_DRV_DATA,
> 	},
>+	{
>+		.compatible = "samsung,exynos5440-tmu",
>+		.data = (void *)EXYNOS5440_TMU_DRV_DATA,
>+	},
> 	{},
> };
> MODULE_DEVICE_TABLE(of, exynos_tmu_match);
>diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
>index 2612b45..5952915 100644
>--- a/drivers/thermal/samsung/exynos_tmu_data.c
>+++ b/drivers/thermal/samsung/exynos_tmu_data.c
>@@ -175,3 +175,74 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
> 	.tmu_count = 1,
> };
> #endif
>+
>+#if defined(CONFIG_SOC_EXYNOS5440)
>+static const struct exynos_tmu_registers exynos5440_tmu_registers = {
>+	.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
>+	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
>+	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
>+	.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
>+	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
>+	.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
>+	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
>+	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
>+	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
>+	.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
>+	.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
>+	.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
>+	.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
>+	.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
>+	.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
>+	.threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
>+	.threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
>+	.threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
>+	.tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
>+	.inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
>+	.inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
>+	.inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
>+	.inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
>+	.inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
>+	.inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
>+	.inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
>+	.inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
>+	.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
>+	.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
>+	.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
>+	.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
>+	.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
>+	.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
>+	.tmu_pmin = EXYNOS5440_TMU_PMIN,
>+};
>+
>+#define EXYNOS5440_TMU_DATA \
>+	.trigger_levels[0] = 100, \
>+	.trigger_levels[4] = 105, \
>+	.trigger_enable[0] = 1, \
>+	.trigger_type[0] = SW_TRIP, \
>+	.trigger_type[4] = HW_TRIP, \
>+	.max_trigger_level = 5, \
>+	.gain = 5, \
>+	.reference_voltage = 16, \
>+	.noise_cancel_mode = 4, \
>+	.cal_type = TYPE_ONE_POINT_TRIMMING, \
>+	.cal_mode = 0, \

.cal_mode = SW_MODE is a clearer expression.

>+	.efuse_value = 0x5b2d, \

.efuse_value should be incremented by one.

Thanks,
Jungseok Lee
>+	.min_efuse_value = 16, \
>+	.max_efuse_value = 76, \
>+	.first_point_trim = 25, \
>+	.second_point_trim = 70, \
>+	.default_temp_offset = 25, \
>+	.type = SOC_ARCH_EXYNOS5440, \
>+	.registers = &exynos5440_tmu_registers, \
>+	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
>+			TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY),
>+
>+struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
>+	.tmu_data = {
>+		{ EXYNOS5440_TMU_DATA } ,
>+		{ EXYNOS5440_TMU_DATA } ,
>+		{ EXYNOS5440_TMU_DATA } ,
>+	},
>+	.tmu_count = 3,
>+};
>+#endif
>diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
>index ad263e9..43ce5fb 100644
>--- a/drivers/thermal/samsung/exynos_tmu_data.h
>+++ b/drivers/thermal/samsung/exynos_tmu_data.h
>@@ -143,4 +143,11 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
> #define EXYNOS5250_TMU_DRV_DATA (NULL)
> #endif
>
>+#if defined(CONFIG_SOC_EXYNOS5440)
>+extern struct exynos_tmu_init_data const exynos5440_default_tmu_data;
>+#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)
>+#else
>+#define EXYNOS5440_TMU_DRV_DATA (NULL)
>+#endif
>+
> #endif /*_EXYNOS_TMU_DATA_H*/
>--
>1.7.1
>
>--
>To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Naveen Krishna Ch Aug. 7, 2013, 9:53 a.m. UTC | #3 
On 26 June 2013 06:54, Jungseok Lee <jays.lee@samsung.com> wrote:
> On Monday, June 24, 2013 7:51 PM, Amit Daniel Kachhap wrote:
>>This patch adds configuration data for exynos5440 soc. Also register
>>definations for the controller are added.
>>
>>Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
>>Acked-by: Kukjin Kim <kgene.kim@samsung.com>
>>Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>>---
>> drivers/thermal/samsung/exynos_tmu.c      |    4 ++
>> drivers/thermal/samsung/exynos_tmu_data.c |   71 +++++++++++++++++++++++++++++
>> drivers/thermal/samsung/exynos_tmu_data.h |    7 +++
>> 3 files changed, 82 insertions(+), 0 deletions(-)
>>
>>diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>>index 6bc86f6..651f460 100644
>>--- a/drivers/thermal/samsung/exynos_tmu.c
>>+++ b/drivers/thermal/samsung/exynos_tmu.c
>>@@ -456,6 +456,10 @@ static const struct of_device_id exynos_tmu_match[] = {
>>               .compatible = "samsung,exynos5250-tmu",
>>               .data = (void *)EXYNOS5250_TMU_DRV_DATA,
>>       },
>>+      {
>>+              .compatible = "samsung,exynos5440-tmu",
>>+              .data = (void *)EXYNOS5440_TMU_DRV_DATA,
>>+      },
>>       {},
>> };
>> MODULE_DEVICE_TABLE(of, exynos_tmu_match);
>>diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
>>index 2612b45..5952915 100644
>>--- a/drivers/thermal/samsung/exynos_tmu_data.c
>>+++ b/drivers/thermal/samsung/exynos_tmu_data.c
>>@@ -175,3 +175,74 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
>>       .tmu_count = 1,
>> };
>> #endif
>>+
>>+#if defined(CONFIG_SOC_EXYNOS5440)
>>+static const struct exynos_tmu_registers exynos5440_tmu_registers = {
>>+      .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
>>+      .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
>>+      .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
>>+      .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
>>+      .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
>>+      .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
>>+      .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
>>+      .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
>>+      .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
>>+      .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
>>+      .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
>>+      .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
>>+      .tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
>>+      .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
>>+      .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
>>+      .threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
>>+      .threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
>>+      .threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
>>+      .tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
>>+      .inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
>>+      .inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
>>+      .inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
>>+      .inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
>>+      .inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
>>+      .inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
>>+      .inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
>>+      .inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
>>+      .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
>>+      .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
>>+      .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
>>+      .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
>>+      .emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
>>+      .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
>>+      .tmu_pmin = EXYNOS5440_TMU_PMIN,
>>+};
>>+
>>+#define EXYNOS5440_TMU_DATA \
>>+      .trigger_levels[0] = 100, \
>>+      .trigger_levels[4] = 105, \
>>+      .trigger_enable[0] = 1, \
>>+      .trigger_type[0] = SW_TRIP, \
>>+      .trigger_type[4] = HW_TRIP, \
>>+      .max_trigger_level = 5, \
>>+      .gain = 5, \
>>+      .reference_voltage = 16, \
>>+      .noise_cancel_mode = 4, \
>>+      .cal_type = TYPE_ONE_POINT_TRIMMING, \
>>+      .cal_mode = 0, \
>
> .cal_mode = SW_MODE is a clearer expression.
>
>>+      .efuse_value = 0x5b2d, \
>
> .efuse_value should be incremented by one.
>
> Thanks,
> Jungseok Lee
>>+      .min_efuse_value = 16, \
>>+      .max_efuse_value = 76, \
>>+      .first_point_trim = 25, \
>>+      .second_point_trim = 70, \
>>+      .default_temp_offset = 25, \
>>+      .type = SOC_ARCH_EXYNOS5440, \
>>+      .registers = &exynos5440_tmu_registers, \
>>+      .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
>>+                      TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY),
>>+
>>+struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
>>+      .tmu_data = {
>>+              { EXYNOS5440_TMU_DATA } ,
>>+              { EXYNOS5440_TMU_DATA } ,
>>+              { EXYNOS5440_TMU_DATA } ,
>>+      },
>>+      .tmu_count = 3,
>>+};
>>+#endif
>>diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
>>index ad263e9..43ce5fb 100644
>>--- a/drivers/thermal/samsung/exynos_tmu_data.h
>>+++ b/drivers/thermal/samsung/exynos_tmu_data.h
>>@@ -143,4 +143,11 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
>> #define EXYNOS5250_TMU_DRV_DATA (NULL)
>> #endif
>>
>>+#if defined(CONFIG_SOC_EXYNOS5440)
>>+extern struct exynos_tmu_init_data const exynos5440_default_tmu_data;
>>+#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)
>>+#else
>>+#define EXYNOS5440_TMU_DRV_DATA (NULL)
>>+#endif
>>+
>> #endif /*_EXYNOS_TMU_DATA_H*/
I'm making some changes for exynos5420 and i've a doubt regarding
passing platform data.

When we have DT support in the driver, Why are we not using DT to pass
all these details ?

>>--
>>1.7.1
>>
>>--
>>To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
>>the body of a message to majordomo@vger.kernel.org
>>More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 6bc86f6..651f460 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -456,6 +456,10 @@  static const struct of_device_id exynos_tmu_match[] = {
 		.compatible = "samsung,exynos5250-tmu",
 		.data = (void *)EXYNOS5250_TMU_DRV_DATA,
 	},
+	{
+		.compatible = "samsung,exynos5440-tmu",
+		.data = (void *)EXYNOS5440_TMU_DRV_DATA,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, exynos_tmu_match);
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 2612b45..5952915 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -175,3 +175,74 @@  struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
 	.tmu_count = 1,
 };
 #endif
+
+#if defined(CONFIG_SOC_EXYNOS5440)
+static const struct exynos_tmu_registers exynos5440_tmu_registers = {
+	.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
+	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
+	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+	.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
+	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
+	.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
+	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
+	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
+	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
+	.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
+	.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
+	.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
+	.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
+	.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
+	.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
+	.threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
+	.threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
+	.threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
+	.tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
+	.inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
+	.inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
+	.inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
+	.inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
+	.inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
+	.inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
+	.inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
+	.inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
+	.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
+	.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
+	.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
+	.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
+	.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
+	.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
+	.tmu_pmin = EXYNOS5440_TMU_PMIN,
+};
+
+#define EXYNOS5440_TMU_DATA \
+	.trigger_levels[0] = 100, \
+	.trigger_levels[4] = 105, \
+	.trigger_enable[0] = 1, \
+	.trigger_type[0] = SW_TRIP, \
+	.trigger_type[4] = HW_TRIP, \
+	.max_trigger_level = 5, \
+	.gain = 5, \
+	.reference_voltage = 16, \
+	.noise_cancel_mode = 4, \
+	.cal_type = TYPE_ONE_POINT_TRIMMING, \
+	.cal_mode = 0, \
+	.efuse_value = 0x5b2d, \
+	.min_efuse_value = 16, \
+	.max_efuse_value = 76, \
+	.first_point_trim = 25, \
+	.second_point_trim = 70, \
+	.default_temp_offset = 25, \
+	.type = SOC_ARCH_EXYNOS5440, \
+	.registers = &exynos5440_tmu_registers, \
+	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+			TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY),
+
+struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
+	.tmu_data = {
+		{ EXYNOS5440_TMU_DATA } ,
+		{ EXYNOS5440_TMU_DATA } ,
+		{ EXYNOS5440_TMU_DATA } ,
+	},
+	.tmu_count = 3,
+};
+#endif
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index ad263e9..43ce5fb 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -143,4 +143,11 @@  extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
 #define EXYNOS5250_TMU_DRV_DATA (NULL)
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS5440)
+extern struct exynos_tmu_init_data const exynos5440_default_tmu_data;
+#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)
+#else
+#define EXYNOS5440_TMU_DRV_DATA (NULL)
+#endif
+
 #endif /*_EXYNOS_TMU_DATA_H*/