diff mbox

[10/22] arm/dts: Add support for the cpuimx25 board from Eukrea and its baseboard.

Message ID 1373900227-341-11-git-send-email-denis@eukrea.com (mailing list archive)
State New, archived
Headers show

Commit Message

Denis Carikli July 15, 2013, 2:56 p.m. UTC 
Only the following devices/functionalities were added:
 * Main UART
 * Memory node
 * NAND
 * i2c and its pcf8563
 * Ethernet
 * LCD controller
 * Sound
 * ESDHC

Signed-off-by: Denis Carikli <denis@eukrea.com>
---
 Documentation/devicetree/bindings/arm/fsl.txt     |    4 ++
 arch/arm/boot/dts/eukrea_cpuimx25.dts             |   48 +++++++++++++++++
 arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi |   59 +++++++++++++++++++++
 3 files changed, 111 insertions(+)
 create mode 100644 arch/arm/boot/dts/eukrea_cpuimx25.dts
 create mode 100644 arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi

Comments

Sascha Hauer July 15, 2013, 9:26 p.m. UTC | #1 
On Mon, Jul 15, 2013 at 04:56:55PM +0200, Denis Carikli wrote:
> Only the following devices/functionalities were added:
>  * Main UART
>  * Memory node
>  * NAND
>  * i2c and its pcf8563
>  * Ethernet
>  * LCD controller
>  * Sound
>  * ESDHC
> 
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> ---
>  Documentation/devicetree/bindings/arm/fsl.txt     |    4 ++
>  arch/arm/boot/dts/eukrea_cpuimx25.dts             |   48 +++++++++++++++++
>  arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi |   59 +++++++++++++++++++++
>  3 files changed, 111 insertions(+)
>  create mode 100644 arch/arm/boot/dts/eukrea_cpuimx25.dts
>  create mode 100644 arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
> index e935d7d..2c19348 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.txt
> +++ b/Documentation/devicetree/bindings/arm/fsl.txt
> @@ -9,6 +9,10 @@ i.MX25 Product Development Kit
>  Required root node properties:
>      - compatible = "fsl,imx25-pdk", "fsl,imx25";
>  
> +i.MX25 Eukrea CPUIMX25 Board.
> +Required root node properties:
> +    - compatible = "fsl,eukrea_cpuimx25", "fsl,imx25";
> +
>  i.MX27 Product Development Kit
>  Required root node properties:
>      - compatible = "fsl,imx27-pdk", "fsl,imx27";
> diff --git a/arch/arm/boot/dts/eukrea_cpuimx25.dts b/arch/arm/boot/dts/eukrea_cpuimx25.dts

Currently all i.MX (and most other SoCs aswell) dts files start with the
SoC prefix, so this file should be named imx25-eukrea-cpuimx25.dts.

> +/dts-v1/;
> +#include "imx25.dtsi"
> +#include "eukrea_mbimxsd25-baseboard.dtsi"

Same here.

> +
> +/ {
> +	model = "Eukrea CPUIMX25";
> +	compatible = "fsl,eukrea_cpuimx25", "fsl,imx25";

As Fabio mentioned in another patch: eukrea,cpuimx25

Sascha
Shawn Guo July 16, 2013, 8:47 a.m. UTC | #2 
On Mon, Jul 15, 2013 at 04:56:55PM +0200, Denis Carikli wrote:
> Only the following devices/functionalities were added:
>  * Main UART
>  * Memory node
>  * NAND
>  * i2c and its pcf8563
>  * Ethernet
>  * LCD controller
>  * Sound
>  * ESDHC
> 
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> ---
>  Documentation/devicetree/bindings/arm/fsl.txt     |    4 ++
>  arch/arm/boot/dts/eukrea_cpuimx25.dts             |   48 +++++++++++++++++
>  arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi |   59 +++++++++++++++++++++
>  3 files changed, 111 insertions(+)
>  create mode 100644 arch/arm/boot/dts/eukrea_cpuimx25.dts
>  create mode 100644 arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
> index e935d7d..2c19348 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.txt
> +++ b/Documentation/devicetree/bindings/arm/fsl.txt
> @@ -9,6 +9,10 @@ i.MX25 Product Development Kit
>  Required root node properties:
>      - compatible = "fsl,imx25-pdk", "fsl,imx25";
>  
> +i.MX25 Eukrea CPUIMX25 Board.
> +Required root node properties:
> +    - compatible = "fsl,eukrea_cpuimx25", "fsl,imx25";
> +

This is not a board produced by Freescale, and shouldn't be added here.
Also recently, it seems that documenting custom board compatible is not
required as hard as before.

>  i.MX27 Product Development Kit
>  Required root node properties:
>      - compatible = "fsl,imx27-pdk", "fsl,imx27";
> diff --git a/arch/arm/boot/dts/eukrea_cpuimx25.dts b/arch/arm/boot/dts/eukrea_cpuimx25.dts
> new file mode 100644
> index 0000000..a65243c
> --- /dev/null
> +++ b/arch/arm/boot/dts/eukrea_cpuimx25.dts
> @@ -0,0 +1,48 @@
> +/*
> + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx25.dtsi"
> +#include "eukrea_mbimxsd25-baseboard.dtsi"
> +
> +/ {
> +	model = "Eukrea CPUIMX25";
> +	compatible = "fsl,eukrea_cpuimx25", "fsl,imx25";
> +
> +	memory {
> +		reg = <0x80000000 0x4000000>; /* 64M */
> +	};
> +};
> +
> +&fec {
> +	phy-mode = "rmii";
> +	status = "okay";

Please consistently put "status" at the end of property list.

> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec_1>;
> +};
> +
> +&nfc {
> +	nand-bus-width = <8>;
> +	nand-ecc-mode = "hw";
> +	nand-on-flash-bbt;
> +	status = "okay";
> +};
> +
> +&i2c1 {

Please sort the nodes in alphabet order.

Shawn

> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1_1>;
> +
> +	pcf8563@51 {
> +		compatible = "nxp,pcf8563";
> +		reg = <0x51>;
> +	};
> +};
> diff --git a/arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi b/arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi
> new file mode 100644
> index 0000000..ffaf657
> --- /dev/null
> +++ b/arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi
> @@ -0,0 +1,59 @@
> +/*
> + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include "skeleton.dtsi"
> +
> +/ {
> +	sound {
> +		compatible = "fsl,eukrea-tlv320";
> +		model = "imx25-eukrea-tlv320aic23";
> +		ssi-controller = <&ssi1>;
> +		fsl,audio-codec = <&tlv320aic23>;
> +		mux-int-port = <1>;
> +		mux-ext-port = <5>;
> +	};
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1_1>;
> +	fsl,uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +&lcdc {
> +	status = "okay";
> +};
> +
> +&audmux {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_audmux_1>;
> +};
> +
> +&ssi1 {
> +	fsl,mode = "i2s-slave";
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	tlv320aic23: codec@1a {
> +		compatible = "ti,tlv320aic23";
> +		reg = <0x1a>;
> +	};
> +};
> +
> +&esdhc1 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_esdhc1_1>;
> +	cd-gpios = <&gpio1 20>;
> +};
> -- 
> 1.7.9.5
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index e935d7d..2c19348 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -9,6 +9,10 @@  i.MX25 Product Development Kit
 Required root node properties:
     - compatible = "fsl,imx25-pdk", "fsl,imx25";
 
+i.MX25 Eukrea CPUIMX25 Board.
+Required root node properties:
+    - compatible = "fsl,eukrea_cpuimx25", "fsl,imx25";
+
 i.MX27 Product Development Kit
 Required root node properties:
     - compatible = "fsl,imx27-pdk", "fsl,imx27";
diff --git a/arch/arm/boot/dts/eukrea_cpuimx25.dts b/arch/arm/boot/dts/eukrea_cpuimx25.dts
new file mode 100644
index 0000000..a65243c
--- /dev/null
+++ b/arch/arm/boot/dts/eukrea_cpuimx25.dts
@@ -0,0 +1,48 @@ 
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx25.dtsi"
+#include "eukrea_mbimxsd25-baseboard.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX25";
+	compatible = "fsl,eukrea_cpuimx25", "fsl,imx25";
+
+	memory {
+		reg = <0x80000000 0x4000000>; /* 64M */
+	};
+};
+
+&fec {
+	phy-mode = "rmii";
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_1>;
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
diff --git a/arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi b/arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi
new file mode 100644
index 0000000..ffaf657
--- /dev/null
+++ b/arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi
@@ -0,0 +1,59 @@ 
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	sound {
+		compatible = "fsl,eukrea-tlv320";
+		model = "imx25-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,audio-codec = <&tlv320aic23>;
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&audmux {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&esdhc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1_1>;
+	cd-gpios = <&gpio1 20>;
+};