| Message ID | 1375409725-22004-5-git-send-email-rvaswani@codeaurora.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
On Aug 1, 2013, at 9:15 PM, Rohit Vaswani wrote: > Add the cpus bindings and the Kraitv2 release sequence > to make SMP work for 2 cores on MSM8974. > > Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> > --- > Documentation/devicetree/bindings/arm/cpus.txt | 1 + > arch/arm/boot/dts/msm8974.dts | 23 ++++++++ > arch/arm/mach-msm/board-dt-8974.c | 3 + > arch/arm/mach-msm/platsmp.c | 79 ++++++++++++++++++++++++++ > 4 files changed, 106 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt > index 1132eac..7c3c677 100644 > --- a/Documentation/devicetree/bindings/arm/cpus.txt > +++ b/Documentation/devicetree/bindings/arm/cpus.txt > @@ -52,6 +52,7 @@ For the ARM architecture every CPU node must contain the following properties: > This should be one of: > "qcom,scss" > "qcom,kpssv1" > + "qcom,kpssv2" > > Example: > > diff --git a/arch/arm/boot/dts/msm8974.dts b/arch/arm/boot/dts/msm8974.dts > index c31c097..ef35a9b 100644 > --- a/arch/arm/boot/dts/msm8974.dts > +++ b/arch/arm/boot/dts/msm8974.dts > @@ -7,6 +7,22 @@ > compatible = "qcom,msm8974"; > interrupt-parent = <&intc>; > > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "qcom,krait"; > + device_type = "cpu"; > + enable-method = "qcom,kpssv2"; > + > + cpu@0 { > + reg = <0>; > + }; > + > + cpu@1 { > + reg = <1>; > + }; Any reason not to have all 4 cores? > + }; > + > intc: interrupt-controller@f9000000 { > compatible = "qcom,msm-qgic2"; > interrupt-controller; > @@ -23,4 +39,11 @@ > <1 1 0xf08>; > clock-frequency = <19200000>; > }; > + > + kpss@f9012000 { > + compatible = "qcom,kpss"; > + reg = <0xf9012000 0x1000>, > + <0xf9088000 0x1000>, > + <0xf9098000 0x1000>; we should probably have regnmaes to go along with this. Also this doesn't really match the binding spec, as you've included the L2 register, we should cleanup the binding spec to be more precise. > + }; > }; > diff --git a/arch/arm/mach-msm/board-dt-8974.c b/arch/arm/mach-msm/board-dt-8974.c > index d7f84f2..06119f9 100644 > --- a/arch/arm/mach-msm/board-dt-8974.c > +++ b/arch/arm/mach-msm/board-dt-8974.c > @@ -13,11 +13,14 @@ > #include <linux/of_platform.h> > #include <asm/mach/arch.h> > > +#include "common.h" > + > static const char * const msm8974_dt_match[] __initconst = { > "qcom,msm8974", > NULL > }; > > DT_MACHINE_START(MSM8974_DT, "Qualcomm MSM (Flattened Device Tree)") > + .smp = smp_ops(msm_smp_ops), > .dt_compat = msm8974_dt_match, > MACHINE_END > diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c > index 82eb079..0fdae69 100644 > --- a/arch/arm/mach-msm/platsmp.c > +++ b/arch/arm/mach-msm/platsmp.c > @@ -124,6 +124,80 @@ static int msm8960_release_secondary(unsigned int cpu) > return 0; > } > > +static int msm8974_release_secondary(unsigned int cpu) > +{ > + void __iomem *reg; > + void __iomem *l2_saw_base; > + struct device_node *dn = NULL; > + unsigned apc_pwr_gate_ctl = 0x14; > + unsigned reg_val; > + > + if (cpu == 0 || cpu >= num_possible_cpus()) > + return -EINVAL; > + > + dn = of_find_compatible_node(dn, NULL, "qcom,kpss"); > + if (!dn) { > + pr_err("%s : Missing kpss node from device tree\n", __func__); > + return -ENXIO; > + } > + > + reg = of_iomap(dn, cpu+1); > + if (!reg) > + return -ENOMEM; > + > + pr_debug("Starting secondary CPU %d\n", cpu); > + > + /* Turn on the BHS, turn off LDO Bypass and power down LDO */ > + reg_val = 0x403f0001; > + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); > + > + /* complete the above write before the delay */ > + mb(); > + /* wait for the bhs to settle */ > + udelay(1); > + > + /* Turn on BHS segments */ > + reg_val |= 0x3f << 1; > + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); > + > + /* complete the above write before the delay */ > + mb(); > + /* wait for the bhs to settle */ > + udelay(1); > + > + /* Finally turn on the bypass so that BHS supplies power */ > + reg_val |= 0x3f << 8; > + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); > + > + /* enable max phases */ > + l2_saw_base = of_iomap(dn, 0); > + if (!l2_saw_base) { > + return -ENOMEM; > + } > + writel_relaxed(0x10003, l2_saw_base + 0x1c); > + mb(); > + udelay(50); > + > + iounmap(l2_saw_base); > + > + writel_relaxed(0x021, reg+0x04); > + mb(); > + udelay(2); > + > + writel_relaxed(0x020, reg+0x04); > + mb(); > + udelay(2); > + > + writel_relaxed(0x000, reg+0x04); > + mb(); > + > + writel_relaxed(0x080, reg+0x04); > + mb(); > + > + iounmap(reg); > + return 0; > +} > + > static DEFINE_PER_CPU(int, cold_boot_done); > > static void boot_cold_cpu(unsigned int cpu) > @@ -151,6 +225,11 @@ static void boot_cold_cpu(unsigned int cpu) > msm8960_release_secondary(cpu); > per_cpu(cold_boot_done, cpu) = true; > } > + } else if (!strcmp(enable_method, "qcom,kpssv2")) { > + if (per_cpu(cold_boot_done, cpu) == false) { > + msm8974_release_secondary(cpu); same comment as on the 8960 patch. > + per_cpu(cold_boot_done, cpu) = true; > + } > } else { > pr_err("%s: Invalid enable-method property: %s\n", > __func__, enable_method); > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > hosted by The Linux Foundation > > -- > To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 02, 2013 at 03:15:25AM +0100, Rohit Vaswani wrote: > Add the cpus bindings and the Kraitv2 release sequence > to make SMP work for 2 cores on MSM8974. > > Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> > --- > Documentation/devicetree/bindings/arm/cpus.txt | 1 + > arch/arm/boot/dts/msm8974.dts | 23 ++++++++ > arch/arm/mach-msm/board-dt-8974.c | 3 + > arch/arm/mach-msm/platsmp.c | 79 ++++++++++++++++++++++++++ > 4 files changed, 106 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt > index 1132eac..7c3c677 100644 > --- a/Documentation/devicetree/bindings/arm/cpus.txt > +++ b/Documentation/devicetree/bindings/arm/cpus.txt > @@ -52,6 +52,7 @@ For the ARM architecture every CPU node must contain the following properties: > This should be one of: > "qcom,scss" > "qcom,kpssv1" > + "qcom,kpssv2" I guess I should've looked at the whole series before responding, that answers my prior question about what variation we expect. > > Example: > > diff --git a/arch/arm/boot/dts/msm8974.dts b/arch/arm/boot/dts/msm8974.dts > index c31c097..ef35a9b 100644 > --- a/arch/arm/boot/dts/msm8974.dts > +++ b/arch/arm/boot/dts/msm8974.dts > @@ -7,6 +7,22 @@ > compatible = "qcom,msm8974"; > interrupt-parent = <&intc>; > > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "qcom,krait"; > + device_type = "cpu"; > + enable-method = "qcom,kpssv2"; > + > + cpu@0 { > + reg = <0>; > + }; > + > + cpu@1 { > + reg = <1>; > + }; > + }; > + > intc: interrupt-controller@f9000000 { > compatible = "qcom,msm-qgic2"; > interrupt-controller; > @@ -23,4 +39,11 @@ > <1 1 0xf08>; > clock-frequency = <19200000>; > }; > + > + kpss@f9012000 { > + compatible = "qcom,kpss"; > + reg = <0xf9012000 0x1000>, > + <0xf9088000 0x1000>, > + <0xf9098000 0x1000>; > + }; In the previous examples, the number of CPUs was equal to the number of kpss reg values. Why does it differ here. Either: * We always have the extra regsiter here, and it should be described even if we don't use it. * It's a different hardware block, and needs a more specific compatible string. Eitehr way this strengthens my feeling that we need to define the linkage from a CPU to the portion of the kpss which affects it. > }; > diff --git a/arch/arm/mach-msm/board-dt-8974.c b/arch/arm/mach-msm/board-dt-8974.c > index d7f84f2..06119f9 100644 > --- a/arch/arm/mach-msm/board-dt-8974.c > +++ b/arch/arm/mach-msm/board-dt-8974.c > @@ -13,11 +13,14 @@ > #include <linux/of_platform.h> > #include <asm/mach/arch.h> > > +#include "common.h" > + > static const char * const msm8974_dt_match[] __initconst = { > "qcom,msm8974", > NULL > }; > > DT_MACHINE_START(MSM8974_DT, "Qualcomm MSM (Flattened Device Tree)") > + .smp = smp_ops(msm_smp_ops), > .dt_compat = msm8974_dt_match, > MACHINE_END > diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c > index 82eb079..0fdae69 100644 > --- a/arch/arm/mach-msm/platsmp.c > +++ b/arch/arm/mach-msm/platsmp.c > @@ -124,6 +124,80 @@ static int msm8960_release_secondary(unsigned int cpu) > return 0; > } > > +static int msm8974_release_secondary(unsigned int cpu) > +{ > + void __iomem *reg; > + void __iomem *l2_saw_base; > + struct device_node *dn = NULL; > + unsigned apc_pwr_gate_ctl = 0x14; > + unsigned reg_val; > + > + if (cpu == 0 || cpu >= num_possible_cpus()) > + return -EINVAL; > + > + dn = of_find_compatible_node(dn, NULL, "qcom,kpss"); > + if (!dn) { > + pr_err("%s : Missing kpss node from device tree\n", __func__); > + return -ENXIO; > + } > + > + reg = of_iomap(dn, cpu+1); This looks very fishy given the prior patch being one off from this. why is reg[0] now different? > + if (!reg) > + return -ENOMEM; > + > + pr_debug("Starting secondary CPU %d\n", cpu); > + > + /* Turn on the BHS, turn off LDO Bypass and power down LDO */ > + reg_val = 0x403f0001; Magic number? > + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); > + > + /* complete the above write before the delay */ > + mb(); Use writel? > + /* wait for the bhs to settle */ > + udelay(1); > + > + /* Turn on BHS segments */ > + reg_val |= 0x3f << 1; > + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); > + > + /* complete the above write before the delay */ > + mb(); Use writel again? > + /* wait for the bhs to settle */ > + udelay(1); > + > + /* Finally turn on the bypass so that BHS supplies power */ > + reg_val |= 0x3f << 8; > + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); > + > + /* enable max phases */ > + l2_saw_base = of_iomap(dn, 0); > + if (!l2_saw_base) { > + return -ENOMEM; > + } What? You've just lost your only reference to the mapping in reg. Why do you not do this at the start, before poking everything else? Even better, do it at probe time and fail once rather than for each CPU you have no chance of bringing up. [...] > static void boot_cold_cpu(unsigned int cpu) > @@ -151,6 +225,11 @@ static void boot_cold_cpu(unsigned int cpu) > msm8960_release_secondary(cpu); > per_cpu(cold_boot_done, cpu) = true; > } > + } else if (!strcmp(enable_method, "qcom,kpssv2")) { > + if (per_cpu(cold_boot_done, cpu) == false) { > + msm8974_release_secondary(cpu); > + per_cpu(cold_boot_done, cpu) = true; > + } > } else { > pr_err("%s: Invalid enable-method property: %s\n", > __func__, enable_method); The enable-method parsing really should be moved out to common code. We could make it scan the enable-method if a machine has no smp ops (which is more general than the PSCI fallback that's been suggested before). Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 8/12/2013 9:39 AM, Mark Rutland wrote: > On Fri, Aug 02, 2013 at 03:15:25AM +0100, Rohit Vaswani wrote: >> Add the cpus bindings and the Kraitv2 release sequence >> to make SMP work for 2 cores on MSM8974. >> >> Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> >> --- >> Documentation/devicetree/bindings/arm/cpus.txt | 1 + >> arch/arm/boot/dts/msm8974.dts | 23 ++++++++ >> arch/arm/mach-msm/board-dt-8974.c | 3 + >> arch/arm/mach-msm/platsmp.c | 79 ++++++++++++++++++++++++++ >> 4 files changed, 106 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt >> index 1132eac..7c3c677 100644 >> --- a/Documentation/devicetree/bindings/arm/cpus.txt >> +++ b/Documentation/devicetree/bindings/arm/cpus.txt >> @@ -52,6 +52,7 @@ For the ARM architecture every CPU node must contain the following properties: >> This should be one of: >> "qcom,scss" >> "qcom,kpssv1" >> + "qcom,kpssv2" > I guess I should've looked at the whole series before responding, that > answers my prior question about what variation we expect. > >> >> Example: >> >> diff --git a/arch/arm/boot/dts/msm8974.dts b/arch/arm/boot/dts/msm8974.dts >> index c31c097..ef35a9b 100644 >> --- a/arch/arm/boot/dts/msm8974.dts >> +++ b/arch/arm/boot/dts/msm8974.dts >> @@ -7,6 +7,22 @@ >> compatible = "qcom,msm8974"; >> interrupt-parent = <&intc>; >> >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "qcom,krait"; >> + device_type = "cpu"; >> + enable-method = "qcom,kpssv2"; >> + >> + cpu@0 { >> + reg = <0>; >> + }; >> + >> + cpu@1 { >> + reg = <1>; >> + }; >> + }; >> + >> intc: interrupt-controller@f9000000 { >> compatible = "qcom,msm-qgic2"; >> interrupt-controller; >> @@ -23,4 +39,11 @@ >> <1 1 0xf08>; >> clock-frequency = <19200000>; >> }; >> + >> + kpss@f9012000 { >> + compatible = "qcom,kpss"; >> + reg = <0xf9012000 0x1000>, >> + <0xf9088000 0x1000>, >> + <0xf9098000 0x1000>; >> + }; > In the previous examples, the number of CPUs was equal to the number of > kpss reg values. Why does it differ here. Either: > > * We always have the extra regsiter here, and it should be described > even if we don't use it. > > * It's a different hardware block, and needs a more specific > compatible string. > > Eitehr way this strengthens my feeling that we need to define the linkage > from a CPU to the portion of the kpss which affects it. Will add documentation for each of the registers. We have one for each CPU and one within the KPSS (Krait Processor Sub-System) e.g the L2 saw base in this case. > >> }; >> diff --git a/arch/arm/mach-msm/board-dt-8974.c b/arch/arm/mach-msm/board-dt-8974.c >> index d7f84f2..06119f9 100644 >> --- a/arch/arm/mach-msm/board-dt-8974.c >> +++ b/arch/arm/mach-msm/board-dt-8974.c >> @@ -13,11 +13,14 @@ >> #include <linux/of_platform.h> >> #include <asm/mach/arch.h> >> >> +#include "common.h" >> + >> static const char * const msm8974_dt_match[] __initconst = { >> "qcom,msm8974", >> NULL >> }; >> >> DT_MACHINE_START(MSM8974_DT, "Qualcomm MSM (Flattened Device Tree)") >> + .smp = smp_ops(msm_smp_ops), >> .dt_compat = msm8974_dt_match, >> MACHINE_END >> diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c >> index 82eb079..0fdae69 100644 >> --- a/arch/arm/mach-msm/platsmp.c >> +++ b/arch/arm/mach-msm/platsmp.c >> @@ -124,6 +124,80 @@ static int msm8960_release_secondary(unsigned int cpu) >> return 0; >> } >> >> +static int msm8974_release_secondary(unsigned int cpu) >> +{ >> + void __iomem *reg; >> + void __iomem *l2_saw_base; >> + struct device_node *dn = NULL; >> + unsigned apc_pwr_gate_ctl = 0x14; >> + unsigned reg_val; >> + >> + if (cpu == 0 || cpu >= num_possible_cpus()) >> + return -EINVAL; >> + >> + dn = of_find_compatible_node(dn, NULL, "qcom,kpss"); >> + if (!dn) { >> + pr_err("%s : Missing kpss node from device tree\n", __func__); >> + return -ENXIO; >> + } >> + >> + reg = of_iomap(dn, cpu+1); > This looks very fishy given the prior patch being one off from this. > why is reg[0] now different? > >> + if (!reg) >> + return -ENOMEM; >> + >> + pr_debug("Starting secondary CPU %d\n", cpu); >> + >> + /* Turn on the BHS, turn off LDO Bypass and power down LDO */ >> + reg_val = 0x403f0001; > Magic number? It represents the comment above it. It didnt seem clean to define 4 different offsets with #defines within a single register for the purpose of 1 write. > >> + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); >> + >> + /* complete the above write before the delay */ >> + mb(); > Use writel? > >> + /* wait for the bhs to settle */ >> + udelay(1); >> + >> + /* Turn on BHS segments */ >> + reg_val |= 0x3f << 1; >> + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); >> + >> + /* complete the above write before the delay */ >> + mb(); > Use writel again? > >> + /* wait for the bhs to settle */ >> + udelay(1); >> + >> + /* Finally turn on the bypass so that BHS supplies power */ >> + reg_val |= 0x3f << 8; >> + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); >> + >> + /* enable max phases */ >> + l2_saw_base = of_iomap(dn, 0); >> + if (!l2_saw_base) { >> + return -ENOMEM; >> + } > What? > > You've just lost your only reference to the mapping in reg. > > Why do you not do this at the start, before poking everything else? Even > better, do it at probe time and fail once rather than for each CPU you > have no chance of bringing up. Will do. > > [...] >> static void boot_cold_cpu(unsigned int cpu) >> @@ -151,6 +225,11 @@ static void boot_cold_cpu(unsigned int cpu) >> msm8960_release_secondary(cpu); >> per_cpu(cold_boot_done, cpu) = true; >> } >> + } else if (!strcmp(enable_method, "qcom,kpssv2")) { >> + if (per_cpu(cold_boot_done, cpu) == false) { >> + msm8974_release_secondary(cpu); >> + per_cpu(cold_boot_done, cpu) = true; >> + } >> } else { >> pr_err("%s: Invalid enable-method property: %s\n", >> __func__, enable_method); > The enable-method parsing really should be moved out to common code. We > could make it scan the enable-method if a machine has no smp ops (which > is more general than the PSCI fallback that's been suggested before). But we have smp ops like every other SoC. I might need to go back to the drawing board for incorporating enable-method into generic code. Any suggestions are appreciated. If enable-method seems cumbersome to be enforced for every SoC, I would be comfortable using the cpu compatible string as you suggested in the previous patch. > > Thanks, > Mark. > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel Thanks, Rohit Vaswani
On 8/2/2013 8:46 AM, Kumar Gala wrote: > On Aug 1, 2013, at 9:15 PM, Rohit Vaswani wrote: > >> Add the cpus bindings and the Kraitv2 release sequence >> to make SMP work for 2 cores on MSM8974. >> >> Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> >> --- >> Documentation/devicetree/bindings/arm/cpus.txt | 1 + >> arch/arm/boot/dts/msm8974.dts | 23 ++++++++ >> arch/arm/mach-msm/board-dt-8974.c | 3 + >> arch/arm/mach-msm/platsmp.c | 79 ++++++++++++++++++++++++++ >> 4 files changed, 106 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt >> index 1132eac..7c3c677 100644 >> --- a/Documentation/devicetree/bindings/arm/cpus.txt >> +++ b/Documentation/devicetree/bindings/arm/cpus.txt >> @@ -52,6 +52,7 @@ For the ARM architecture every CPU node must contain the following properties: >> This should be one of: >> "qcom,scss" >> "qcom,kpssv1" >> + "qcom,kpssv2" >> >> Example: >> >> diff --git a/arch/arm/boot/dts/msm8974.dts b/arch/arm/boot/dts/msm8974.dts >> index c31c097..ef35a9b 100644 >> --- a/arch/arm/boot/dts/msm8974.dts >> +++ b/arch/arm/boot/dts/msm8974.dts >> @@ -7,6 +7,22 @@ >> compatible = "qcom,msm8974"; >> interrupt-parent = <&intc>; >> >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "qcom,krait"; >> + device_type = "cpu"; >> + enable-method = "qcom,kpssv2"; >> + >> + cpu@0 { >> + reg = <0>; >> + }; >> + >> + cpu@1 { >> + reg = <1>; >> + }; > Any reason not to have all 4 cores? > >> + }; >> + >> intc: interrupt-controller@f9000000 { >> compatible = "qcom,msm-qgic2"; >> interrupt-controller; >> @@ -23,4 +39,11 @@ >> <1 1 0xf08>; >> clock-frequency = <19200000>; >> }; >> + >> + kpss@f9012000 { >> + compatible = "qcom,kpss"; >> + reg = <0xf9012000 0x1000>, >> + <0xf9088000 0x1000>, >> + <0xf9098000 0x1000>; > we should probably have regnmaes to go along with this. > > Also this doesn't really match the binding spec, as you've included the L2 register, we should cleanup the binding spec to be more precise. Its part of the Krait Processor Sub-System. I will add the reg-names to clear this up. > >> + }; >> }; >> diff --git a/arch/arm/mach-msm/board-dt-8974.c b/arch/arm/mach-msm/board-dt-8974.c >> index d7f84f2..06119f9 100644 >> --- a/arch/arm/mach-msm/board-dt-8974.c >> +++ b/arch/arm/mach-msm/board-dt-8974.c >> @@ -13,11 +13,14 @@ >> #include <linux/of_platform.h> >> #include <asm/mach/arch.h> >> >> +#include "common.h" >> + >> static const char * const msm8974_dt_match[] __initconst = { >> "qcom,msm8974", >> NULL >> }; >> >> DT_MACHINE_START(MSM8974_DT, "Qualcomm MSM (Flattened Device Tree)") >> + .smp = smp_ops(msm_smp_ops), >> .dt_compat = msm8974_dt_match, >> MACHINE_END >> diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c >> index 82eb079..0fdae69 100644 >> --- a/arch/arm/mach-msm/platsmp.c >> +++ b/arch/arm/mach-msm/platsmp.c >> @@ -124,6 +124,80 @@ static int msm8960_release_secondary(unsigned int cpu) >> return 0; >> } >> >> +static int msm8974_release_secondary(unsigned int cpu) >> +{ >> + void __iomem *reg; >> + void __iomem *l2_saw_base; >> + struct device_node *dn = NULL; >> + unsigned apc_pwr_gate_ctl = 0x14; >> + unsigned reg_val; >> + >> + if (cpu == 0 || cpu >= num_possible_cpus()) >> + return -EINVAL; >> + >> + dn = of_find_compatible_node(dn, NULL, "qcom,kpss"); >> + if (!dn) { >> + pr_err("%s : Missing kpss node from device tree\n", __func__); >> + return -ENXIO; >> + } >> + >> + reg = of_iomap(dn, cpu+1); >> + if (!reg) >> + return -ENOMEM; >> + >> + pr_debug("Starting secondary CPU %d\n", cpu); >> + >> + /* Turn on the BHS, turn off LDO Bypass and power down LDO */ >> + reg_val = 0x403f0001; >> + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); >> + >> + /* complete the above write before the delay */ >> + mb(); >> + /* wait for the bhs to settle */ >> + udelay(1); >> + >> + /* Turn on BHS segments */ >> + reg_val |= 0x3f << 1; >> + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); >> + >> + /* complete the above write before the delay */ >> + mb(); >> + /* wait for the bhs to settle */ >> + udelay(1); >> + >> + /* Finally turn on the bypass so that BHS supplies power */ >> + reg_val |= 0x3f << 8; >> + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); >> + >> + /* enable max phases */ >> + l2_saw_base = of_iomap(dn, 0); >> + if (!l2_saw_base) { >> + return -ENOMEM; >> + } >> + writel_relaxed(0x10003, l2_saw_base + 0x1c); >> + mb(); >> + udelay(50); >> + >> + iounmap(l2_saw_base); >> + >> + writel_relaxed(0x021, reg+0x04); >> + mb(); >> + udelay(2); >> + >> + writel_relaxed(0x020, reg+0x04); >> + mb(); >> + udelay(2); >> + >> + writel_relaxed(0x000, reg+0x04); >> + mb(); >> + >> + writel_relaxed(0x080, reg+0x04); >> + mb(); >> + >> + iounmap(reg); >> + return 0; >> +} >> + >> static DEFINE_PER_CPU(int, cold_boot_done); >> >> static void boot_cold_cpu(unsigned int cpu) >> @@ -151,6 +225,11 @@ static void boot_cold_cpu(unsigned int cpu) >> msm8960_release_secondary(cpu); >> per_cpu(cold_boot_done, cpu) = true; >> } >> + } else if (!strcmp(enable_method, "qcom,kpssv2")) { >> + if (per_cpu(cold_boot_done, cpu) == false) { >> + msm8974_release_secondary(cpu); > same comment as on the 8960 patch. > >> + per_cpu(cold_boot_done, cpu) = true; >> + } >> } else { >> pr_err("%s: Invalid enable-method property: %s\n", >> __func__, enable_method); >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, >> hosted by The Linux Foundation >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > Employee of Qualcomm Innovation Center, Inc. > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel Thanks, Rohit Vaswani
On Wed, Aug 14, 2013 at 11:38:44PM +0100, Rohit Vaswani wrote: > On 8/12/2013 9:39 AM, Mark Rutland wrote: > > On Fri, Aug 02, 2013 at 03:15:25AM +0100, Rohit Vaswani wrote: > >> Add the cpus bindings and the Kraitv2 release sequence > >> to make SMP work for 2 cores on MSM8974. > >> > >> Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> > >> --- > >> Documentation/devicetree/bindings/arm/cpus.txt | 1 + > >> arch/arm/boot/dts/msm8974.dts | 23 ++++++++ > >> arch/arm/mach-msm/board-dt-8974.c | 3 + > >> arch/arm/mach-msm/platsmp.c | 79 ++++++++++++++++++++++++++ > >> 4 files changed, 106 insertions(+) > >> > >> diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt > >> index 1132eac..7c3c677 100644 > >> --- a/Documentation/devicetree/bindings/arm/cpus.txt > >> +++ b/Documentation/devicetree/bindings/arm/cpus.txt > >> @@ -52,6 +52,7 @@ For the ARM architecture every CPU node must contain the following properties: > >> This should be one of: > >> "qcom,scss" > >> "qcom,kpssv1" > >> + "qcom,kpssv2" > > I guess I should've looked at the whole series before responding, that > > answers my prior question about what variation we expect. > > > >> > >> Example: > >> > >> diff --git a/arch/arm/boot/dts/msm8974.dts b/arch/arm/boot/dts/msm8974.dts > >> index c31c097..ef35a9b 100644 > >> --- a/arch/arm/boot/dts/msm8974.dts > >> +++ b/arch/arm/boot/dts/msm8974.dts > >> @@ -7,6 +7,22 @@ > >> compatible = "qcom,msm8974"; > >> interrupt-parent = <&intc>; > >> > >> + cpus { > >> + #address-cells = <1>; > >> + #size-cells = <0>; > >> + compatible = "qcom,krait"; > >> + device_type = "cpu"; > >> + enable-method = "qcom,kpssv2"; > >> + > >> + cpu@0 { > >> + reg = <0>; > >> + }; > >> + > >> + cpu@1 { > >> + reg = <1>; > >> + }; > >> + }; > >> + > >> intc: interrupt-controller@f9000000 { > >> compatible = "qcom,msm-qgic2"; > >> interrupt-controller; > >> @@ -23,4 +39,11 @@ > >> <1 1 0xf08>; > >> clock-frequency = <19200000>; > >> }; > >> + > >> + kpss@f9012000 { > >> + compatible = "qcom,kpss"; > >> + reg = <0xf9012000 0x1000>, > >> + <0xf9088000 0x1000>, > >> + <0xf9098000 0x1000>; > >> + }; > > In the previous examples, the number of CPUs was equal to the number of > > kpss reg values. Why does it differ here. Either: > > > > * We always have the extra regsiter here, and it should be described > > even if we don't use it. > > > > * It's a different hardware block, and needs a more specific > > compatible string. > > > > Eitehr way this strengthens my feeling that we need to define the linkage > > from a CPU to the portion of the kpss which affects it. > Will add documentation for each of the registers. We have one for each > CPU and one within the KPSS (Krait Processor Sub-System) e.g the L2 saw > base in this case. Ok. So the previous example had no L2 saw base? > > > >> }; > >> diff --git a/arch/arm/mach-msm/board-dt-8974.c b/arch/arm/mach-msm/board-dt-8974.c > >> index d7f84f2..06119f9 100644 > >> --- a/arch/arm/mach-msm/board-dt-8974.c > >> +++ b/arch/arm/mach-msm/board-dt-8974.c > >> @@ -13,11 +13,14 @@ > >> #include <linux/of_platform.h> > >> #include <asm/mach/arch.h> > >> > >> +#include "common.h" > >> + > >> static const char * const msm8974_dt_match[] __initconst = { > >> "qcom,msm8974", > >> NULL > >> }; > >> > >> DT_MACHINE_START(MSM8974_DT, "Qualcomm MSM (Flattened Device Tree)") > >> + .smp = smp_ops(msm_smp_ops), > >> .dt_compat = msm8974_dt_match, > >> MACHINE_END > >> diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c > >> index 82eb079..0fdae69 100644 > >> --- a/arch/arm/mach-msm/platsmp.c > >> +++ b/arch/arm/mach-msm/platsmp.c > >> @@ -124,6 +124,80 @@ static int msm8960_release_secondary(unsigned int cpu) > >> return 0; > >> } > >> > >> +static int msm8974_release_secondary(unsigned int cpu) > >> +{ > >> + void __iomem *reg; > >> + void __iomem *l2_saw_base; > >> + struct device_node *dn = NULL; > >> + unsigned apc_pwr_gate_ctl = 0x14; > >> + unsigned reg_val; > >> + > >> + if (cpu == 0 || cpu >= num_possible_cpus()) > >> + return -EINVAL; > >> + > >> + dn = of_find_compatible_node(dn, NULL, "qcom,kpss"); > >> + if (!dn) { > >> + pr_err("%s : Missing kpss node from device tree\n", __func__); > >> + return -ENXIO; > >> + } > >> + > >> + reg = of_iomap(dn, cpu+1); > > This looks very fishy given the prior patch being one off from this. > > why is reg[0] now different? > > > >> + if (!reg) > >> + return -ENOMEM; > >> + > >> + pr_debug("Starting secondary CPU %d\n", cpu); > >> + > >> + /* Turn on the BHS, turn off LDO Bypass and power down LDO */ > >> + reg_val = 0x403f0001; > > Magic number? > It represents the comment above it. It didnt seem clean to define 4 > different offsets with #defines within a single register for the purpose > of 1 write. In general I'd prefer having symbolic names, but I'm not going to argue here. > > > >> + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); > >> + > >> + /* complete the above write before the delay */ > >> + mb(); > > Use writel? > > > >> + /* wait for the bhs to settle */ > >> + udelay(1); > >> + > >> + /* Turn on BHS segments */ > >> + reg_val |= 0x3f << 1; > >> + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); > >> + > >> + /* complete the above write before the delay */ > >> + mb(); > > Use writel again? > > > >> + /* wait for the bhs to settle */ > >> + udelay(1); > >> + > >> + /* Finally turn on the bypass so that BHS supplies power */ > >> + reg_val |= 0x3f << 8; > >> + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); > >> + > >> + /* enable max phases */ > >> + l2_saw_base = of_iomap(dn, 0); > >> + if (!l2_saw_base) { > >> + return -ENOMEM; > >> + } > > What? > > > > You've just lost your only reference to the mapping in reg. > > > > Why do you not do this at the start, before poking everything else? Even > > better, do it at probe time and fail once rather than for each CPU you > > have no chance of bringing up. > Will do. > > > > > [...] > >> static void boot_cold_cpu(unsigned int cpu) > >> @@ -151,6 +225,11 @@ static void boot_cold_cpu(unsigned int cpu) > >> msm8960_release_secondary(cpu); > >> per_cpu(cold_boot_done, cpu) = true; > >> } > >> + } else if (!strcmp(enable_method, "qcom,kpssv2")) { > >> + if (per_cpu(cold_boot_done, cpu) == false) { > >> + msm8974_release_secondary(cpu); > >> + per_cpu(cold_boot_done, cpu) = true; > >> + } > >> } else { > >> pr_err("%s: Invalid enable-method property: %s\n", > >> __func__, enable_method); > > The enable-method parsing really should be moved out to common code. We > > could make it scan the enable-method if a machine has no smp ops (which > > is more general than the PSCI fallback that's been suggested before). > But we have smp ops like every other SoC. I might need to go back to the > drawing board for incorporating enable-method into generic code. > Any suggestions are appreciated. I think we need generic infrastructure that checks if we have a NULL smp_ops and tries to find one based on any enable-method properties in the dt. > If enable-method seems cumbersome to be enforced for every SoC, I would > be comfortable using the cpu compatible string as you suggested in the > previous patch. I'm not sure cpu compatible string alone gives us enough, the integration of the SoC and particular board will affect how we bring up secondaries. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 1132eac..7c3c677 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -52,6 +52,7 @@ For the ARM architecture every CPU node must contain the following properties: This should be one of: "qcom,scss" "qcom,kpssv1" + "qcom,kpssv2" Example: diff --git a/arch/arm/boot/dts/msm8974.dts b/arch/arm/boot/dts/msm8974.dts index c31c097..ef35a9b 100644 --- a/arch/arm/boot/dts/msm8974.dts +++ b/arch/arm/boot/dts/msm8974.dts @@ -7,6 +7,22 @@ compatible = "qcom,msm8974"; interrupt-parent = <&intc>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,krait"; + device_type = "cpu"; + enable-method = "qcom,kpssv2"; + + cpu@0 { + reg = <0>; + }; + + cpu@1 { + reg = <1>; + }; + }; + intc: interrupt-controller@f9000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -23,4 +39,11 @@ <1 1 0xf08>; clock-frequency = <19200000>; }; + + kpss@f9012000 { + compatible = "qcom,kpss"; + reg = <0xf9012000 0x1000>, + <0xf9088000 0x1000>, + <0xf9098000 0x1000>; + }; }; diff --git a/arch/arm/mach-msm/board-dt-8974.c b/arch/arm/mach-msm/board-dt-8974.c index d7f84f2..06119f9 100644 --- a/arch/arm/mach-msm/board-dt-8974.c +++ b/arch/arm/mach-msm/board-dt-8974.c @@ -13,11 +13,14 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> +#include "common.h" + static const char * const msm8974_dt_match[] __initconst = { "qcom,msm8974", NULL }; DT_MACHINE_START(MSM8974_DT, "Qualcomm MSM (Flattened Device Tree)") + .smp = smp_ops(msm_smp_ops), .dt_compat = msm8974_dt_match, MACHINE_END diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 82eb079..0fdae69 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -124,6 +124,80 @@ static int msm8960_release_secondary(unsigned int cpu) return 0; } +static int msm8974_release_secondary(unsigned int cpu) +{ + void __iomem *reg; + void __iomem *l2_saw_base; + struct device_node *dn = NULL; + unsigned apc_pwr_gate_ctl = 0x14; + unsigned reg_val; + + if (cpu == 0 || cpu >= num_possible_cpus()) + return -EINVAL; + + dn = of_find_compatible_node(dn, NULL, "qcom,kpss"); + if (!dn) { + pr_err("%s : Missing kpss node from device tree\n", __func__); + return -ENXIO; + } + + reg = of_iomap(dn, cpu+1); + if (!reg) + return -ENOMEM; + + pr_debug("Starting secondary CPU %d\n", cpu); + + /* Turn on the BHS, turn off LDO Bypass and power down LDO */ + reg_val = 0x403f0001; + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); + + /* complete the above write before the delay */ + mb(); + /* wait for the bhs to settle */ + udelay(1); + + /* Turn on BHS segments */ + reg_val |= 0x3f << 1; + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); + + /* complete the above write before the delay */ + mb(); + /* wait for the bhs to settle */ + udelay(1); + + /* Finally turn on the bypass so that BHS supplies power */ + reg_val |= 0x3f << 8; + writel_relaxed(reg_val, reg + apc_pwr_gate_ctl); + + /* enable max phases */ + l2_saw_base = of_iomap(dn, 0); + if (!l2_saw_base) { + return -ENOMEM; + } + writel_relaxed(0x10003, l2_saw_base + 0x1c); + mb(); + udelay(50); + + iounmap(l2_saw_base); + + writel_relaxed(0x021, reg+0x04); + mb(); + udelay(2); + + writel_relaxed(0x020, reg+0x04); + mb(); + udelay(2); + + writel_relaxed(0x000, reg+0x04); + mb(); + + writel_relaxed(0x080, reg+0x04); + mb(); + + iounmap(reg); + return 0; +} + static DEFINE_PER_CPU(int, cold_boot_done); static void boot_cold_cpu(unsigned int cpu) @@ -151,6 +225,11 @@ static void boot_cold_cpu(unsigned int cpu) msm8960_release_secondary(cpu); per_cpu(cold_boot_done, cpu) = true; } + } else if (!strcmp(enable_method, "qcom,kpssv2")) { + if (per_cpu(cold_boot_done, cpu) == false) { + msm8974_release_secondary(cpu); + per_cpu(cold_boot_done, cpu) = true; + } } else { pr_err("%s: Invalid enable-method property: %s\n", __func__, enable_method);
Add the cpus bindings and the Kraitv2 release sequence to make SMP work for 2 cores on MSM8974. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> --- Documentation/devicetree/bindings/arm/cpus.txt | 1 + arch/arm/boot/dts/msm8974.dts | 23 ++++++++ arch/arm/mach-msm/board-dt-8974.c | 3 + arch/arm/mach-msm/platsmp.c | 79 ++++++++++++++++++++++++++ 4 files changed, 106 insertions(+)