diff mbox

[2/4] net: ethernet: cpsw: add optional third memory region for CONTROL module

Message ID 1377171448-27924-3-git-send-email-zonque@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Daniel Mack Aug. 22, 2013, 11:37 a.m. UTC
At least the AM33xx SoC has a control module register to configure
details such as the hardware ethernet interface mode.

I'm not sure whether all SoCs which feature the cpsw block have such a
register, so that third memory region is considered optional for now.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 Documentation/devicetree/bindings/net/cpsw.txt |  5 ++++-
 drivers/net/ethernet/ti/cpsw.c                 | 22 ++++++++++++++++++++++
 2 files changed, 26 insertions(+), 1 deletion(-)

Comments

Sergei Shtylyov Aug. 22, 2013, 6:12 p.m. UTC | #1
Hello.

On 08/22/2013 03:37 PM, Daniel Mack wrote:

> At least the AM33xx SoC has a control module register to configure
> details such as the hardware ethernet interface mode.

> I'm not sure whether all SoCs which feature the cpsw block have such a
> register, so that third memory region is considered optional for now.

> Signed-off-by: Daniel Mack <zonque@gmail.com>
> ---
>   Documentation/devicetree/bindings/net/cpsw.txt |  5 ++++-
>   drivers/net/ethernet/ti/cpsw.c                 | 22 ++++++++++++++++++++++
>   2 files changed, 26 insertions(+), 1 deletion(-)

> diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
> index 05d660e..4e5ca54 100644
> --- a/Documentation/devicetree/bindings/net/cpsw.txt
> +++ b/Documentation/devicetree/bindings/net/cpsw.txt
[...]
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index 63feaae..4855d8e 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
[...]
> @@ -2012,6 +2013,27 @@ static int cpsw_probe(struct platform_device *pdev)
>   		goto clean_runtime_disable_ret;
>   	}
>
> +	/* If the control memory region is unspecified, continue without it.
> +	 * If it is specified, but we're unable to reserve it, bail. */

    According to Documentation/CodingStyle, the networking code's preferred 
style of multi-line comments is this:

/* Bla
  * bla
  */

> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
> +	if (!res) {
> +		dev_err(priv->dev, "error getting control i/o resource\n");
> +		goto no_gmii_sel;
> +	}
> +	if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
> +				     ndev->name)) {

    Not dev_name(&pdev->dev)?

> +		dev_err(priv->dev, "failed request control i/o region\n");
> +		ret = -ENXIO;

    Rather -EBUSY.

> +		goto clean_runtime_disable_ret;
> +	}
> +	priv->gmii_sel_reg = devm_ioremap(&pdev->dev, res->start,
> +					  resource_size(res));
> +	if (!priv->gmii_sel_reg) {
> +		dev_err(priv->dev, "unable to map control i/o region\n");
> +		goto clean_runtime_disable_ret;
> +	}

    Why not use devm_ioremap_resource() instead of the above sequence?

> +
> +no_gmii_sel:

WBR, Sergei
Daniel Mack Aug. 22, 2013, 6:37 p.m. UTC | #2
Hi Sergei,

On 22.08.2013 20:12, Sergei Shtylyov wrote:
>> @@ -2012,6 +2013,27 @@ static int cpsw_probe(struct platform_device *pdev)
>>   		goto clean_runtime_disable_ret;
>>   	}
>>
>> +	/* If the control memory region is unspecified, continue without it.
>> +	 * If it is specified, but we're unable to reserve it, bail. */
> 
>     According to Documentation/CodingStyle, the networking code's preferred 
> style of multi-line comments is this:
> 
> /* Bla
>   * bla
>   */

Ok, thanks. Will fix.

>> +		goto clean_runtime_disable_ret;
>> +	}
>> +	priv->gmii_sel_reg = devm_ioremap(&pdev->dev, res->start,
>> +					  resource_size(res));
>> +	if (!priv->gmii_sel_reg) {
>> +		dev_err(priv->dev, "unable to map control i/o region\n");
>> +		goto clean_runtime_disable_ret;
>> +	}
> 
>     Why not use devm_ioremap_resource() instead of the above sequence?

Right, that's much nicer. I'll also do that for the devm rework patch.


Thank you for your review!


Daniel
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 05d660e..4e5ca54 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -4,7 +4,10 @@  TI SoC Ethernet Switch Controller Device Tree Bindings
 Required properties:
 - compatible		: Should be "ti,cpsw"
 - reg			: physical base address and size of the cpsw
-			  registers map
+			  registers map.
+			  An optional third memory region can be supplied if
+			  the platform has a control module register to
+			  configure phy interface details
 - interrupts		: property with a value describing the interrupt
 			  number
 - interrupt-parent	: The parent interrupt controller
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 63feaae..4855d8e 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -372,6 +372,7 @@  struct cpsw_priv {
 	struct cpsw_platform_data	data;
 	struct cpsw_ss_regs __iomem	*regs;
 	struct cpsw_wr_regs __iomem	*wr_regs;
+	u32 __iomem			*gmii_sel_reg;
 	u8 __iomem			*hw_stats;
 	struct cpsw_host_regs __iomem	*host_port_regs;
 	u32				msg_enable;
@@ -2012,6 +2013,27 @@  static int cpsw_probe(struct platform_device *pdev)
 		goto clean_runtime_disable_ret;
 	}
 
+	/* If the control memory region is unspecified, continue without it.
+	 * If it is specified, but we're unable to reserve it, bail. */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (!res) {
+		dev_err(priv->dev, "error getting control i/o resource\n");
+		goto no_gmii_sel;
+	}
+	if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
+				     ndev->name)) {
+		dev_err(priv->dev, "failed request control i/o region\n");
+		ret = -ENXIO;
+		goto clean_runtime_disable_ret;
+	}
+	priv->gmii_sel_reg = devm_ioremap(&pdev->dev, res->start,
+					  resource_size(res));
+	if (!priv->gmii_sel_reg) {
+		dev_err(priv->dev, "unable to map control i/o region\n");
+		goto clean_runtime_disable_ret;
+	}
+
+no_gmii_sel:
 	memset(&dma_params, 0, sizeof(dma_params));
 	memset(&ale_params, 0, sizeof(ale_params));