| Message ID | 1377067433-28373-1-git-send-email-yuvaraj.cd@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Yuvaraj, On Wednesday 21 of August 2013 12:13:53 Yuvaraj Kumar C D wrote: > This patch adds the device tree node entries for exynos5420 SOC. > Exynos5420 has a different version of DWMMC controller,so a new > compatible string is used to distinguish it from the prior SOC's. What are the difference between both versions? Is there a patch adding the new compatible to the driver somewhere? > changes since V1: > 1.disable node by status = disabled in SOC file > 2.enable node by status = okay in board specific file Ahh, so you fixed this already in this version, thanks. Haven't noticed this patch at first and commented on previous one. Sorry for the noise. > > Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> > --- > .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 ++ > arch/arm/boot/dts/exynos5420-smdk5420.dts | 38 > ++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi > | 36 +++++++++++++++++++ 3 files changed, 76 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index > 6d1c098..84cd56f 100644 > --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > @@ -16,6 +16,8 @@ Required Properties: > specific extensions. > - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 > specific extensions. > + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 > + specific extensions. > > * samsung,dw-mshc-ciu-div: Specifies the divider value for the card > interface unit (ciu) clock. This property is applicable only for Exynos5 > SoC's and diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts > b/arch/arm/boot/dts/exynos5420-smdk5420.dts index bafba25..6e65278 > 100644 > --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts > +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts > @@ -31,6 +31,44 @@ > }; > }; > > + dwmmc0@12200000 { > + status = "okay"; > + num-slots = <1>; You don't have to specify this property if there is only one slot. Also are you sure that this is a board specific property? > + broken-cd; > + bypass-smu; This property doesn't seem to be documented nor used anywhere. > + supports-highspeed; Is it a board specific property? > + fifo-depth = <0x80>; Ditto. > + card-detect-delay = <200>; > + samsung,dw-mshc-ciu-div = <3>; > + samsung,dw-mshc-sdr-timing = <0 4>; > + samsung,dw-mshc-ddr-timing = <0 2>; Are the above three properties really board-specific? Same for remaining nodes. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Aug 21, 2013 at 4:00 PM, Tomasz Figa <t.figa@samsung.com> wrote: > Hi Yuvaraj, > > On Wednesday 21 of August 2013 12:13:53 Yuvaraj Kumar C D wrote: >> This patch adds the device tree node entries for exynos5420 SOC. >> Exynos5420 has a different version of DWMMC controller,so a new >> compatible string is used to distinguish it from the prior SOC's. > > What are the difference between both versions? Is there a patch adding the > new compatible to the driver somewhere? Exynos5250 has DWMMC controller of IP version 2.41a Exynos5420 has DWMMC controller of IP version 2.50a In addition Exynos5420 has Security Management Unit for eMMC. > >> changes since V1: >> 1.disable node by status = disabled in SOC file >> 2.enable node by status = okay in board specific file > > Ahh, so you fixed this already in this version, thanks. Haven't noticed > this patch at first and commented on previous one. Sorry for the noise. > >> >> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> >> --- >> .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 ++ >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 38 >> ++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi >> | 36 +++++++++++++++++++ 3 files changed, 76 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >> b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index >> 6d1c098..84cd56f 100644 >> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >> @@ -16,6 +16,8 @@ Required Properties: >> specific extensions. >> - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 >> specific extensions. >> + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 >> + specific extensions. >> >> * samsung,dw-mshc-ciu-div: Specifies the divider value for the card >> interface unit (ciu) clock. This property is applicable only for Exynos5 >> SoC's and diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts >> b/arch/arm/boot/dts/exynos5420-smdk5420.dts index bafba25..6e65278 >> 100644 >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts >> @@ -31,6 +31,44 @@ >> }; >> }; >> >> + dwmmc0@12200000 { >> + status = "okay"; >> + num-slots = <1>; > > You don't have to specify this property if there is only one slot. Also are > you sure that this is a board specific property? Yes,If num-slots property is not defined dw_mmc driver assumes 1 slot is available. I think yes,its a board specific property as number of card slots is board dependent. > >> + broken-cd; >> + bypass-smu; > > This property doesn't seem to be documented nor used anywhere. Sorry. I missed to add in binding document.Will add in next version. > >> + supports-highspeed; > > Is it a board specific property? > >> + fifo-depth = <0x80>; > > Ditto. Ideally this can be move to SOC specific dts.But I am just following ,already merged smdk5250 board dts convensions. > >> + card-detect-delay = <200>; >> + samsung,dw-mshc-ciu-div = <3>; >> + samsung,dw-mshc-sdr-timing = <0 4>; >> + samsung,dw-mshc-ddr-timing = <0 2>; > > Are the above three properties really board-specific? > > Same for remaining nodes. > > Best regards, > Tomasz > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 22 of August 2013 12:24:58 Yuvaraj Kumar wrote: > On Wed, Aug 21, 2013 at 4:00 PM, Tomasz Figa <t.figa@samsung.com> wrote: > > Hi Yuvaraj, > > > > On Wednesday 21 of August 2013 12:13:53 Yuvaraj Kumar C D wrote: > >> This patch adds the device tree node entries for exynos5420 SOC. > >> Exynos5420 has a different version of DWMMC controller,so a new > >> compatible string is used to distinguish it from the prior SOC's. > > > > What are the difference between both versions? Is there a patch adding > > the new compatible to the driver somewhere? > > Exynos5250 has DWMMC controller of IP version 2.41a > Exynos5420 has DWMMC controller of IP version 2.50a > In addition Exynos5420 has Security Management Unit for eMMC. OK. What about my second question? > >> changes since V1: > >> 1.disable node by status = disabled in SOC file > >> 2.enable node by status = okay in board specific file > > > > Ahh, so you fixed this already in this version, thanks. Haven't > > noticed > > this patch at first and commented on previous one. Sorry for the > > noise. > > > >> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> > >> --- > >> > >> .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 ++ > >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 38 > >> > >> ++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi > >> > >> | 36 +++++++++++++++++++ 3 files changed, 76 insertions(+) > >> > >> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > >> b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index > >> 6d1c098..84cd56f 100644 > >> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > >> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > >> > >> @@ -16,6 +16,8 @@ Required Properties: > >> specific extensions. > >> > >> - "samsung,exynos5250-dw-mshc": for controllers with Samsung > >> Exynos5250 > >> > >> specific extensions. > >> + - "samsung,exynos5420-dw-mshc": for controllers with Samsung > >> Exynos5420 + specific extensions. > >> > >> * samsung,dw-mshc-ciu-div: Specifies the divider value for the card > >> > >> interface unit (ciu) clock. This property is applicable only for > >> Exynos5 SoC's and diff --git > >> a/arch/arm/boot/dts/exynos5420-smdk5420.dts > >> b/arch/arm/boot/dts/exynos5420-smdk5420.dts index bafba25..6e65278 > >> 100644 > >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts > >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts > >> @@ -31,6 +31,44 @@ > >> > >> }; > >> > >> }; > >> > >> + dwmmc0@12200000 { > >> + status = "okay"; > >> + num-slots = <1>; > > > > You don't have to specify this property if there is only one slot. > > Also are you sure that this is a board specific property? > > Yes,If num-slots property is not defined dw_mmc driver assumes 1 slot > is available. > I think yes,its a board specific property as number of card slots is > board dependent. > > >> + broken-cd; > >> + bypass-smu; > > > > This property doesn't seem to be documented nor used anywhere. > > Sorry. I missed to add in binding document.Will add in next version. Is there a patch adding support for this property to the driver? > >> + supports-highspeed; > > > > Is it a board specific property? > > > >> + fifo-depth = <0x80>; > > > > Ditto. > > Ideally this can be move to SOC specific dts.But I am just following > ,already merged smdk5250 board > dts convensions. This means that Exynos5250 board dts files need to be fixed as well. > >> + card-detect-delay = <200>; > >> + samsung,dw-mshc-ciu-div = <3>; > >> + samsung,dw-mshc-sdr-timing = <0 4>; > >> + samsung,dw-mshc-ddr-timing = <0 2>; > > > > Are the above three properties really board-specific? Hmm? Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 23, 2013 at 4:36 AM, Tomasz Figa <tomasz.figa@gmail.com> wrote: > On Thursday 22 of August 2013 12:24:58 Yuvaraj Kumar wrote: >> On Wed, Aug 21, 2013 at 4:00 PM, Tomasz Figa <t.figa@samsung.com> wrote: >> > Hi Yuvaraj, >> > >> > On Wednesday 21 of August 2013 12:13:53 Yuvaraj Kumar C D wrote: >> >> This patch adds the device tree node entries for exynos5420 SOC. >> >> Exynos5420 has a different version of DWMMC controller,so a new >> >> compatible string is used to distinguish it from the prior SOC's. >> > >> > What are the difference between both versions? Is there a patch adding >> > the new compatible to the driver somewhere? >> >> Exynos5250 has DWMMC controller of IP version 2.41a >> Exynos5420 has DWMMC controller of IP version 2.50a >> In addition Exynos5420 has Security Management Unit for eMMC. > > OK. What about my second question? Below is the link. http://permalink.gmane.org/gmane.linux.kernel.mmc/21060 > >> >> changes since V1: >> >> 1.disable node by status = disabled in SOC file >> >> 2.enable node by status = okay in board specific file >> > >> > Ahh, so you fixed this already in this version, thanks. Haven't >> > noticed >> > this patch at first and commented on previous one. Sorry for the >> > noise. >> > >> >> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> >> >> --- >> >> >> >> .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 ++ >> >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 38 >> >> >> >> ++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi >> >> >> >> | 36 +++++++++++++++++++ 3 files changed, 76 insertions(+) >> >> >> >> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >> >> b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index >> >> 6d1c098..84cd56f 100644 >> >> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >> >> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >> >> >> >> @@ -16,6 +16,8 @@ Required Properties: >> >> specific extensions. >> >> >> >> - "samsung,exynos5250-dw-mshc": for controllers with Samsung >> >> Exynos5250 >> >> >> >> specific extensions. >> >> + - "samsung,exynos5420-dw-mshc": for controllers with Samsung >> >> Exynos5420 + specific extensions. >> >> >> >> * samsung,dw-mshc-ciu-div: Specifies the divider value for the card >> >> >> >> interface unit (ciu) clock. This property is applicable only for >> >> Exynos5 SoC's and diff --git >> >> a/arch/arm/boot/dts/exynos5420-smdk5420.dts >> >> b/arch/arm/boot/dts/exynos5420-smdk5420.dts index bafba25..6e65278 >> >> 100644 >> >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts >> >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts >> >> @@ -31,6 +31,44 @@ >> >> >> >> }; >> >> >> >> }; >> >> >> >> + dwmmc0@12200000 { >> >> + status = "okay"; >> >> + num-slots = <1>; >> > >> > You don't have to specify this property if there is only one slot. >> > Also are you sure that this is a board specific property? >> >> Yes,If num-slots property is not defined dw_mmc driver assumes 1 slot >> is available. >> I think yes,its a board specific property as number of card slots is >> board dependent. >> >> >> + broken-cd; >> >> + bypass-smu; >> > >> > This property doesn't seem to be documented nor used anywhere. >> >> Sorry. I missed to add in binding document.Will add in next version. > > Is there a patch adding support for this property to the driver? Yes.You can find here http://permalink.gmane.org/gmane.linux.kernel.mmc/21060 > >> >> + supports-highspeed; >> > >> > Is it a board specific property? >> > >> >> + fifo-depth = <0x80>; >> > >> > Ditto. >> >> Ideally this can be move to SOC specific dts.But I am just following >> ,already merged smdk5250 board >> dts convensions. > > This means that Exynos5250 board dts files need to be fixed as well. > >> >> + card-detect-delay = <200>; >> >> + samsung,dw-mshc-ciu-div = <3>; >> >> + samsung,dw-mshc-sdr-timing = <0 4>; >> >> + samsung,dw-mshc-ddr-timing = <0 2>; >> > >> > Are the above three properties really board-specific? > > Hmm? I am not sure about this. But Doug Anderson has pointed out these as board specific properties. > > Best regards, > Tomasz > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Yuvaraj, On 08/23/2013 03:16 PM, Yuvaraj Cd wrote: > On Fri, Aug 23, 2013 at 4:36 AM, Tomasz Figa <tomasz.figa@gmail.com> wrote: >> On Thursday 22 of August 2013 12:24:58 Yuvaraj Kumar wrote: >>> On Wed, Aug 21, 2013 at 4:00 PM, Tomasz Figa <t.figa@samsung.com> wrote: >>>> Hi Yuvaraj, >>>> >>>> On Wednesday 21 of August 2013 12:13:53 Yuvaraj Kumar C D wrote: >>>>> This patch adds the device tree node entries for exynos5420 SOC. >>>>> Exynos5420 has a different version of DWMMC controller,so a new >>>>> compatible string is used to distinguish it from the prior SOC's. >>>> >>>> What are the difference between both versions? Is there a patch adding >>>> the new compatible to the driver somewhere? >>> >>> Exynos5250 has DWMMC controller of IP version 2.41a >>> Exynos5420 has DWMMC controller of IP version 2.50a >>> In addition Exynos5420 has Security Management Unit for eMMC. >> >> OK. What about my second question? > Below is the link. > http://permalink.gmane.org/gmane.linux.kernel.mmc/21060 If you will send the next version, Could you add the comment about patch has dependency? Best Regards, Jaehoon Chung >> >>>>> changes since V1: >>>>> 1.disable node by status = disabled in SOC file >>>>> 2.enable node by status = okay in board specific file >>>> >>>> Ahh, so you fixed this already in this version, thanks. Haven't >>>> noticed >>>> this patch at first and commented on previous one. Sorry for the >>>> noise. >>>> >>>>> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> >>>>> --- >>>>> >>>>> .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 ++ >>>>> arch/arm/boot/dts/exynos5420-smdk5420.dts | 38 >>>>> >>>>> ++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi >>>>> >>>>> | 36 +++++++++++++++++++ 3 files changed, 76 insertions(+) >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >>>>> b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index >>>>> 6d1c098..84cd56f 100644 >>>>> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >>>>> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >>>>> >>>>> @@ -16,6 +16,8 @@ Required Properties: >>>>> specific extensions. >>>>> >>>>> - "samsung,exynos5250-dw-mshc": for controllers with Samsung >>>>> Exynos5250 >>>>> >>>>> specific extensions. >>>>> + - "samsung,exynos5420-dw-mshc": for controllers with Samsung >>>>> Exynos5420 + specific extensions. >>>>> >>>>> * samsung,dw-mshc-ciu-div: Specifies the divider value for the card >>>>> >>>>> interface unit (ciu) clock. This property is applicable only for >>>>> Exynos5 SoC's and diff --git >>>>> a/arch/arm/boot/dts/exynos5420-smdk5420.dts >>>>> b/arch/arm/boot/dts/exynos5420-smdk5420.dts index bafba25..6e65278 >>>>> 100644 >>>>> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts >>>>> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts >>>>> @@ -31,6 +31,44 @@ >>>>> >>>>> }; >>>>> >>>>> }; >>>>> >>>>> + dwmmc0@12200000 { >>>>> + status = "okay"; >>>>> + num-slots = <1>; >>>> >>>> You don't have to specify this property if there is only one slot. >>>> Also are you sure that this is a board specific property? >>> >>> Yes,If num-slots property is not defined dw_mmc driver assumes 1 slot >>> is available. >>> I think yes,its a board specific property as number of card slots is >>> board dependent. >>> >>>>> + broken-cd; >>>>> + bypass-smu; >>>> >>>> This property doesn't seem to be documented nor used anywhere. >>> >>> Sorry. I missed to add in binding document.Will add in next version. >> >> Is there a patch adding support for this property to the driver? > Yes.You can find here http://permalink.gmane.org/gmane.linux.kernel.mmc/21060 >> >>>>> + supports-highspeed; >>>> >>>> Is it a board specific property? >>>> >>>>> + fifo-depth = <0x80>; >>>> >>>> Ditto. >>> >>> Ideally this can be move to SOC specific dts.But I am just following >>> ,already merged smdk5250 board >>> dts convensions. >> >> This means that Exynos5250 board dts files need to be fixed as well. >> >>>>> + card-detect-delay = <200>; >>>>> + samsung,dw-mshc-ciu-div = <3>; >>>>> + samsung,dw-mshc-sdr-timing = <0 4>; >>>>> + samsung,dw-mshc-ddr-timing = <0 2>; >>>> >>>> Are the above three properties really board-specific? >> >> Hmm? > I am not sure about this. But Doug Anderson has pointed out these as > board specific properties. >> >> Best regards, >> Tomasz >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index 6d1c098..84cd56f 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -16,6 +16,8 @@ Required Properties: specific extensions. - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 specific extensions. + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 + specific extensions. * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface unit (ciu) clock. This property is applicable only for Exynos5 SoC's and diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index bafba25..6e65278 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -31,6 +31,44 @@ }; }; + dwmmc0@12200000 { + status = "okay"; + num-slots = <1>; + broken-cd; + bypass-smu; + supports-highspeed; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + dwmmc2@12220000 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; + }; + dp-controller@145B0000 { pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 5353e32..694e7f1 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -22,6 +22,9 @@ compatible = "samsung,exynos5420"; aliases { + mshc0 = &dwmmc_0; + mshc1 = &dwmmc_1; + mshc2 = &dwmmc_2; pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; @@ -84,6 +87,39 @@ clock-names = "mfc"; }; + dwmmc_0: dwmmc0@12200000 { + compatible = "samsung,exynos5420-dw-mshc"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12200000 0x2000>; + clocks = <&clock 351>, <&clock 132>; + clock-names = "biu", "ciu"; + status = "disabled"; + }; + + dwmmc_1: dwmmc1@12210000 { + compatible = "samsung,exynos5420-dw-mshc"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12210000 0x2000>; + clocks = <&clock 352>, <&clock 133>; + clock-names = "biu", "ciu"; + status = "disabled"; + }; + + dwmmc_2: dwmmc2@12220000 { + compatible = "samsung,exynos5420-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12220000 0x2000>; + clocks = <&clock 353>, <&clock 134>; + clock-names = "biu", "ciu"; + status = "disabled"; + }; + mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>;
This patch adds the device tree node entries for exynos5420 SOC. Exynos5420 has a different version of DWMMC controller,so a new compatible string is used to distinguish it from the prior SOC's. changes since V1: 1.disable node by status = disabled in SOC file 2.enable node by status = okay in board specific file Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> --- .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 ++ arch/arm/boot/dts/exynos5420-smdk5420.dts | 38 ++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi | 36 +++++++++++++++++++ 3 files changed, 76 insertions(+)