| Message ID | 1379063679-4869-4-git-send-email-archit@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Sep 13, 2013 at 5:14 AM, Archit Taneja <archit@ti.com> wrote: > Enable use of DT for DMM/Tiler. > > Originally worked on by Andy Gross. looks good.. but do we want to get information about # of LUT's, etc, from DT? Or did we decide that we can reliably get this from the hw? I lost track of that discussion (I guess Andy would remember).. BR, -R > Cc: Andy Gross <andygro@gmail.com> > Cc: DRI Development <dri-devel@lists.freedesktop.org> > Signed-off-by: Archit Taneja <archit@ti.com> > --- > drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c > index acf6678..59f17de 100644 > --- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c > +++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c > @@ -968,12 +968,23 @@ static const struct dev_pm_ops omap_dmm_pm_ops = { > }; > #endif > > +#if defined(CONFIG_OF) > +static const struct of_device_id dmm_of_match[] = { > + { .compatible = "ti,omap4-dmm", }, > + { .compatible = "ti,omap5-dmm", }, > + {}, > +}; > +#else > +#define dmm_of_match NULL > +#endif > + > struct platform_driver omap_dmm_driver = { > .probe = omap_dmm_probe, > .remove = omap_dmm_remove, > .driver = { > .owner = THIS_MODULE, > .name = DMM_DRIVER_NAME, > + .of_match_table = dmm_of_match, > #ifdef CONFIG_PM > .pm = &omap_dmm_pm_ops, > #endif > -- > 1.8.1.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday 13 September 2013 07:44 PM, Rob Clark wrote: > On Fri, Sep 13, 2013 at 5:14 AM, Archit Taneja <archit@ti.com> wrote: >> Enable use of DT for DMM/Tiler. >> >> Originally worked on by Andy Gross. > > looks good.. but do we want to get information about # of LUT's, etc, > from DT? Or did we decide that we can reliably get this from the hw? > I lost track of that discussion (I guess Andy would remember).. I am not aware of the discussion either. But looks like we get the LUT info from the HW registers in omap_dmm_probe: hwinfo = readl(omap_dmm->base + DMM_PAT_HWINFO); omap_dmm->num_engines = (hwinfo >> 24) & 0x1F; omap_dmm->num_lut = (hwinfo >> 16) & 0x1F; omap_dmm->container_width = 256; omap_dmm->container_height = 128; atomic_set(&omap_dmm->engine_counter, omap_dmm->num_engines); /* read out actual LUT width and height */ pat_geom = readl(omap_dmm->base + DMM_PAT_GEOMETRY); omap_dmm->lut_width = ((pat_geom >> 16) & 0xF) << 5; omap_dmm->lut_height = ((pat_geom >> 24) & 0xF) << 5; /* increment LUT by one if on OMAP5 */ /* LUT has twice the height, and is split into a separate container */ if (omap_dmm->lut_height != omap_dmm->container_height) omap_dmm->num_lut++; Archit -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Sep 16, 2013 at 2:28 AM, Archit Taneja <archit@ti.com> wrote: > On Friday 13 September 2013 07:44 PM, Rob Clark wrote: >> >> On Fri, Sep 13, 2013 at 5:14 AM, Archit Taneja <archit@ti.com> wrote: >>> >>> Enable use of DT for DMM/Tiler. >>> >>> Originally worked on by Andy Gross. >> >> >> looks good.. but do we want to get information about # of LUT's, etc, >> from DT? Or did we decide that we can reliably get this from the hw? >> I lost track of that discussion (I guess Andy would remember).. > > > I am not aware of the discussion either. But looks like we get the LUT info > from the HW registers in omap_dmm_probe: right.. I'm possibly mis-remembering, but I thought I remember Andy worried that this was not reliable for some reason or another, but I can't really remember the details. The issue may have only been related to a pre-Si simulation environment, so it could be nothing. I suppose if it becomes an issue in the future we could always add DT bindings to override what we would read from the hw, so I guess if this works on all the current devices, maybe it isn't worth worrying about right now. BR, -R > hwinfo = readl(omap_dmm->base + DMM_PAT_HWINFO); > omap_dmm->num_engines = (hwinfo >> 24) & 0x1F; > omap_dmm->num_lut = (hwinfo >> 16) & 0x1F; > omap_dmm->container_width = 256; > omap_dmm->container_height = 128; > > atomic_set(&omap_dmm->engine_counter, omap_dmm->num_engines); > > /* read out actual LUT width and height */ > pat_geom = readl(omap_dmm->base + DMM_PAT_GEOMETRY); > omap_dmm->lut_width = ((pat_geom >> 16) & 0xF) << 5; > omap_dmm->lut_height = ((pat_geom >> 24) & 0xF) << 5; > > /* increment LUT by one if on OMAP5 */ > /* LUT has twice the height, and is split into a separate container > */ > if (omap_dmm->lut_height != omap_dmm->container_height) > omap_dmm->num_lut++; > > > Archit -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c index acf6678..59f17de 100644 --- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c +++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c @@ -968,12 +968,23 @@ static const struct dev_pm_ops omap_dmm_pm_ops = { }; #endif +#if defined(CONFIG_OF) +static const struct of_device_id dmm_of_match[] = { + { .compatible = "ti,omap4-dmm", }, + { .compatible = "ti,omap5-dmm", }, + {}, +}; +#else +#define dmm_of_match NULL +#endif + struct platform_driver omap_dmm_driver = { .probe = omap_dmm_probe, .remove = omap_dmm_remove, .driver = { .owner = THIS_MODULE, .name = DMM_DRIVER_NAME, + .of_match_table = dmm_of_match, #ifdef CONFIG_PM .pm = &omap_dmm_pm_ops, #endif
Enable use of DT for DMM/Tiler. Originally worked on by Andy Gross. Cc: Andy Gross <andygro@gmail.com> Cc: DRI Development <dri-devel@lists.freedesktop.org> Signed-off-by: Archit Taneja <archit@ti.com> --- drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 11 +++++++++++ 1 file changed, 11 insertions(+)